I've been using Samsung Pay on my Gear S3 connected to my S5 running @jrkruse Stock/Rooted DEODEXED QA1 - been working perfectly.
Just got notice on my phone that a Samsung Pay update failed. When I opened it, it says:
"Samsung Pay cannot be accessed by rooted devices for security reasons. Unroot your device in order to use Samsung Pay"
Any ideas? Thanks in advance!
PS The watch actually still looks like it always has - like it should still work, but I haven't tried it since this phone update. Gear S3 Samsung Pay version is 1.3.2103.
Although my rooted Nexus 6P also would not update, the Gear continued to work with SP until I ended up having to re-pair the phone and watch. At that point it no longer worked. Oddly I removed root and turned off developer options and Pay is still telling me that I'm rooted. Used a root checker and verified that I'm no longer rooted. Not sure what to do at this point.
Related
A few weeks ago I rooted my Verizon Galaxy S4 using a simple method found on this forum. I didn't really do much with the phone other than uninstalling some preinstalled apps that I don't use, and I added a multi window manager to add some apps to the multi window function. I unrooted the device using the full cleanup for unroot in supersu before installing a verizon update about 2 weeks ago.
I am still unrooted, however when the device boots up it no longer shows the galaxy s4 screen. It now shows "Samsung" with an image of a lock that is unlocked and it reads "custom" underneath.
I was prompted to update about 2 days ago. it is the update to 4.3. I cannot install this update. When I try it almost immediately fails. Again, I am not rooted any more. I'm assuming that the few small changes I made are the reason.
My main question is how can I just get the phone back to stock. I just want it to be configured the way it was before I even rooted it. I'm at a point that I wish I hadn't done that. Is it possible to flash it back to factory 100% or am I pretty much screwed?
ytsejam6922 said:
A few weeks ago I rooted my Verizon Galaxy S4 using a simple method found on this forum. I didn't really do much with the phone other than uninstalling some preinstalled apps that I don't use, and I added a multi window manager to add some apps to the multi window function. I unrooted the device using the full cleanup for unroot in supersu before installing a verizon update about 2 weeks ago.
I am still unrooted, however when the device boots up it no longer shows the galaxy s4 screen. It now shows "Samsung" with an image of a lock that is unlocked and it reads "custom" underneath.
I was prompted to update about 2 days ago. it is the update to 4.3. I cannot install this update. When I try it almost immediately fails. Again, I am not rooted any more. I'm assuming that the few small changes I made are the reason.
My main question is how can I just get the phone back to stock. I just want it to be configured the way it was before I even rooted it. I'm at a point that I wish I hadn't done that. Is it possible to flash it back to factory 100% or am I pretty much screwed?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2265477
Ok, so first off I rooted my previous phone (a Verizon Motorola Droid X2) without any problems ever. I dropped Verizon as my carrier and switched to Straight Talk and I bought the Samsung Galaxy S4, after a few months of having it I decided to look for a way to root it. After a few days of browsing and reading about I found and root option that worked. (http://forum.xda-developers.com/showthread.php?t=2565758) This saferoot worked and i had superuser and was able to do everything i wanted to.
I then went on the Google play store and installed apps that I previously had on my old device for rooted phones. Well I installed chainfire3D and opened it up and clicked install the drives (which then requires a reboot) after a sort time I noticed my phone was stuck on the loading screen and I can't get past it.
I then start looking for a unroot/unbrick option in order to restore my phone to default firmware and factory settings to get it to work again.
Now here is the dilemma...
Like it says in the title, the phone model is SGH-S970G and for the life of me I can't find this model's firmware anywhere.
plz help me asap!!!!
Thank you in advance for any useful information to help point me in the right direction or give me a solution!
Chuggalo said:
Ok, so first off I rooted my previous phone (a Verizon Motorola Droid X2) without any problems ever. I dropped Verizon as my carrier and switched to Straight Talk and I bought the Samsung Galaxy S4, after a few months of having it I decided to look for a way to root it. After a few days of browsing and reading about I found and root option that worked. (http://forum.xda-developers.com/showthread.php?t=2565758) This saferoot worked and i had superuser and was able to do everything i wanted to.
I then went on the Google play store and installed apps that I previously had on my old device for rooted phones. Well I installed chainfire3D and opened it up and clicked install the drives (which then requires a reboot) after a sort time I noticed my phone was stuck on the loading screen and I can't get past it.
I then start looking for a unroot/unbrick option in order to restore my phone to default firmware and factory settings to get it to work again.
Now here is the dilemma...
Like it says in the title, the phone model is SGH-S970G and for the life of me I can't find this model's firmware anywhere.
plz help me asap!!!!
Thank you in advance for any useful information to help point me in the right direction or give me a solution!
Click to expand...
Click to collapse
If you get your phone fixed, I suggest you skip reinstalling Chainfire 3D. It specifically says it's not for Jelly Bean devices.
Ok, so ages ago I fooled around with my GT-I9506 S4 and rooted it.
Then I 'unrooted' it or so I thought.
I went to install a tap and go bank payment app on my phone and it refused to install saying my device was rooted.
I ran Root Checker and it said my phone was not rooted.
I went in to system settings and hit update and it refused, saying 'your device has been modified'.
So I have several questions,
1. How do I well and truly unroot my phone?
I'm downloading a stock firmware from Sammobile, should I just use Odin and do a complete reinstall?
2. Or instead, I see Xposed http://repo.xposed.info/module/de.robv.android.xposed.installer seemingly can help you defeat root detection when installing handy apps.
Thing is I've tried connecting my S4 to my Win 7 PC which has the lastest Samsung usb drivers installed but it won't detect so I can't transfer APKs.
Grrrrrr. Oh, and Kies doesn't work either. ****ing Samsung, I can't believe how badly supported their phones are.
Both options would work.
I Haven't rooted my phone yet but it keeps telling me this when I open android pay, when I first got my phone I set my up my card but now it saying that phone is either rooted or bootloader unlocked which isn't the case.
On Vodafone UK, before this I used my OP3 with Magisk with Android Pay but I haven't used that since I've got my s8 so I'm not sure what the issue could be.
Any insight to this?
Besides the usual factory reset.
same here EE UK S8 not rooted (yet) but comes up with same error message. It worked fine on my rooted and hidden with magisk S6
edit - oh and factory reset doesn't work as I already tried that. I thought it might have had something to do with bringing over magisk app from my google backup but I specifically didnt install that the 2nd time around. Knox hasn't been tripped so its not that
I'm having the same issue on a Galaxy S8 via Tmobile. I've never rooted it, have no clue if the bootloader is unlocked and I'm stock since I reset the phone the first time I got the error. Still getting the error and Android pay help chat was not useful.
Same issue here, on Voda UK. I used Package Disabler pro and thinking I might have disabled something I need.
So since I had OEM unlock enabled after disabling it, it passes and safetynet now.
I had no problems adding cards, but a few days later when I wanted to add more cards, I get the error. I can't remember what I did in between that would've caused this, but definitely not rooting! I turned developer option to off and still get the error.
My S7 is rooted and TWRPed and have no problems adding cards!!!!???
Very weird. Working just fine on my rooted s8+ with magisk.
I'm on T-Mobile with a S8 and Android Pay connected to my PayPal is getting card read error everywhere I try to use it.
Safety net says everything is ok too. Not sure what's going on. I have the newest update and not rooted.
Sent from my SM-G950U using Tapatalk
I installed different Samsung Pay Framework apk and now I want to revert back and downgrade to another version to make Spay work.. when I click uninstall updates it wont let me. (Gives message that App is needed by system administrator.. when I open sys admin nothing there. hidden app)
Any ideas or suggestions on how to downgrade Samsung Pay Framework?
Thank you in advance,
Joe
xeathpk said:
Very weird. Working just fine on my rooted s8+ with magisk.
Click to expand...
Click to collapse
Hi Can you let me know how you managed to root with Magisk and get Android pay etc to work?
My phone:
Model: SM-G955F
SW: G955FXXU1AQF7
I tried rooted and couldn't get it working, and now recovered to official ROM and still can't get it to work?!?
Dont you people know anythin?
All EU(exynos) S8 and other galaxies come with unlocked bootloaders. Thats causing the problem
Lock it
Hi all,
I already posted a question in the Official stock upgrade but it got lost in the other comments, so I'm trying my luck again.
I had an italian branded SM-G950F (OMN), I wanted to remove all the Vodafone stuff, so I installed a MULTI-CSC as per the official stock firmware upgrade thread, when I did it I had my Australian sim card in and I got a weird UK CSC (the multi CSC didn't have australia in it), after installing everything I noticed that Android Pay didn't work, so I did a factory reset with my italian sim card in and still Android Pay was complaining that my firmware was modified or rooted.
I decided to use an australian specific firmware so I downloaded an XSA firmware and did the procedure again.
At this stage Secure Folder and Samsung Pay work (the phone is NOT rooted, this update has been the only "mod" I have done) but Android Pay is still saying that my rom may be modified or rooted so it doesn't open.
It is pretty important for me because my back supports android pay but not samsung pay
The phone is not rooted, if I reboot the phone in download mode the warranty void bit is 0 (which is good).
If I use Root Checker Pro, under safety net tab, I get CTS profile match as FAIL, I was thinking this could cause Android Pay to fail.
any idea?
start to uninstall suspicious apps, then restart . worked with my un-rooted S8. OEM unlock: OFF
degsyh said:
same here EE UK S8 not rooted (yet) but comes up with same error message. It worked fine on my rooted and hidden with magisk S6
edit - oh and factory reset doesn't work as I already tried that. I thought it might have had something to do with bringing over magisk app from my google backup but I specifically didnt install that the 2nd time around. Knox hasn't been tripped so its not that
Click to expand...
Click to collapse
Does rooting in UK\Europe void our warranty?
mariuscrist said:
start to uninstall suspicious apps, then restart . worked with my un-rooted S8. OEM unlock: OFF
Click to expand...
Click to collapse
Hi mariuscrist,
I'm not sure what app can be suspicious, I have reinstalled the apps I had before the firmware update and I could use android pay then. I'll see what it can be, probably it could be worth to do a factory reset and test android pay before anything else?
OK guys, sorry I know this has been brought up a bit, but I've been determined to find a solution. I've been trying to get Samsung Pay to work. More specifically because I use it a lot and have a Gear S3 that I want it to work with.
Yes I did research before I rooted, and it appeared there were many solutions to this problem, but I've tried them all and none have worked. I just want to see if anyone at all has got this working. Maybe I can update with different things everyones tried as we go. I feel like there HAS to be a way to make this work. If anyone has gotten this to work in any way, please post!
My Phone: SM-G950F
Knox Status: 0x1 (Faked 0x0 by Magisk)
ROM: Renovate Ice 5.1
CSC Version: SPE (Spain)
From my research, the SPE seems to be open to Samsung pay along with some others. I have encountered different error messages with different combinations of software, hiding Samsung Pay in Magisk, etc. It might just be due to newer and older version of Samsung Pay
Things I've tried:
Fake 0x0 with Magisk, v13.6, 13.7, 14.0
Hide root status with Magisk
1.3.7 Samsung Pay Gear Plug-In (I found somewhere that said this version works, although it just keeps updating for me)
Moved /system/xbin/busybox to SD card
Error message I'm receiving on latest software: Access Denied: Samsung Pay has been locked due to an unauthorized modification. Tap the link below to call customer service and unlock Samsung Pay (RD-SXA).
Note, I have not tried calling customer service yet, that will likely be my next step. I will just tell them I bought the phone on eBay and I'm getting this message. I doubt there is anything they can do, but it's worth a try.
Please don't grill me, I know basically everyone claims this is NOT possible with 0x1 due to hardware fuse, etc. I know this community is strong and I've seen people pull off the impossible before, just hoping to get this to work so my S3 Gear doesn't become a paper weight.
The actual functionalities of Samsung Pay (MST for example) are handled by trusted apps running in secure world. Root in normal world does not affect anything there. Saying that we can fool normal world apps, we still can't fool the TA running in secure world. So even though Samsung Pay app can launch, it won't be able to function in the end.
OK, I have an update. I was able to get Samsung Pay (mobile version) to work! The regular version still gives me an error, but if I launch from my watch, it pulls the mobile version instead.
Here's what I did:
**NOTE: This only works if you have a Gear S3, I have not been able to get the full version of Samsung Pay to work on the phone yet.
1. Boot into recovery
2. Wipe all partitions except the SD Card and OTG
3. Installed Renovate Ice 5.1
4. Select Custom CSC during install and chose "214 Spain"
5. At the end of setup, don't reboot, flash magisk again manually (It's installed in the ROM, however this is the only way I found to get the icon to show up)
6. Open Magisk Manager
7. Click Menu and go to "Magisk Hide"
8. Search for "Pay" and check all apps that show up
9. Update all apps and connect S3 as a new device (you can restore apps/settings)
10. Use root explorer to /system/xbin and move busybox to your SD card (Make sure it doesn't exist on internal storage, if it's present, app will fail)
11. Launch Magisk Manager again and search for "Pay", again make sure all are checked, for me there was another new Gear version that I had to check to hide
12. Reboot the phone
13. Hold down top button on S3 to launch Samsung Pay
14. Proceed through wizard and add a card or "Launch" Samsung Pay on the phone from the S3
15. The Samsung Mobile app should open correctly on the phone and let you add cards etc.
If you try to add busybox back and reboot, it will not work. And again, the actual "Samsung Pay" app on the phone does NOT work, I still get an error. Maybe it's not possible.
schwags said:
OK, I have an update. I was able to get Samsung Pay (mobile version) to work! The regular version still gives me an error, but if I launch from my watch, it pulls the mobile version instead.
...
If you try to add busybox back and reboot, it will not work. And again, the actual "Samsung Pay" app on the phone does NOT work, I still get an error. Maybe it's not possible.
Click to expand...
Click to collapse
Nice findings! So Gear S3 has stand alone pay capability even with non-Samsung devices?
idler1984 said:
Nice findings! So Gear S3 has stand alone pay capability even with non-Samsung devices?
Click to expand...
Click to collapse
I'm not sure about non Samsung devices. All I'm saying is there are 2 versions of Samsung Pay on the S8, one standard version that you would use if you didn't have a Gear S3 and another version that s triggered from the S3 but then runs on phone. That's the one I can get to work.
Sent from my SM-G950F using XDA-Developers Legacy app
Does this method work with renovate 7.2? I have followed the steps and appears denied access
Same problem here, and I live in Spain too!
Does it work with other rom?
I have an sm 930f with 0x1 status, also. since the error message has changed and suggests "call customer service to unlock samsung pay at 0330 726 7729" I just got off the phone with UK customer service.
1. agent didn't know anything about unlocking samsung pay
2. since I reside in the U..S he suggested I had to call U.S customer service which I have already done and they know nothing about unlocking samsung pay. Perhaps there's a change in the works but not yet.
I wonder what happens if the flash counter hits 0x9. One more flash and it hits 0x10 or does it go back to 0x0??