[HELP] Forgot to enable usb debug - Moto G4 Plus Questions & Answers

Now im in twrp and have already wiped the system and forgot to enable the usb debug
i flash RR but theres some problem because i used the wrong gapps. so im immediately go into the recovery to reflash.
i already do the clean wipe but when i go to file manager it cannot be read on my pc. i thought or usually some rom keep the usb debug and mtp on, so i didnt check it. is there anything i can use to transfer rom and gapps file to my phone ? ive tried using fastboot on bootloader but seem not working because the usb debug is disabled. pls help

In twrp recovery mode, connect phone to pc and transfer file
Sent from my Moto G4 Plus using Tapatalk

Related

bootloop problem & in DOWNLOAD MODE the computer not detect phone

hello,
i did wipe dalvik cache on my galaxy s i9000
and tryed to turn on the phone
the phone enterd into a boot loop,
i tried to enter to recovery mode but without success
so i tried to enter to download mode with success
so i tried to flash new rom with odin but the computer not detect usb...
someone can help me!?
thanks!
talzigi said:
hello,
i did wipe dalvik cache on my galaxy s i9000
and tryed to turn on the phone
the phone enterd into a boot loop,
i tried to enter to recovery mode but without success
so i tried to enter to download mode with success
so i tried to flash new rom with odin but the computer not detect usb...
someone can help me!?
thanks!
Click to expand...
Click to collapse
Do you have kies installed?
Firstly give some information about what Rom you are on
If you are on GB rom search for SGS USB driver. If you are on ICS rom search for Nexus USB driver. If you don't know which ROM was last install both drivers. You can find them on Samsung website. Or check my thread how I almost made a brick.
i have kies installed
and the rom is CM9
and what i need to install to try to get into recovery from the computer?
i have a windows 7 64 bit
you will need the nexus s usb drivers http://nexusshacks.com/nexus-s-hacks/how-to-install-nexus-s-windows-usb-drivers/
If you have lost recovery try flashing the semaphore .tar version in Odin, that usually fixes it
the drivers not helped....
i didnt get the usb not recognized message..
i am connecting the usb and nothing happend.
Make sure you r in usb storage mode,
I'll try to recollect the remedy:
-Uninstall or disable Kies.
-put phone in download mode.
-connect usb from phone direct to pc, Do NOT use unpowered usb hub.
-open windows device manager and update phone drivers browsing to folder of extracted Nexus S usb drivers.
-disconnect usb.
-restart pc.
-while pc boot up, ask yourself:
Why didn't I do research?
-start Odin
-load latest Semaphore_ICS_1.2.6.tar kernel in PHONE field. Uncheck repartition.
-put sgs in download mode.
-connect usb and flash.
Check cable. Go to other comp and look if there is response about installing driver.

Team win recovery project mounting issues

As teh title says i am using v2.5.0.0 of this recovery rom for my samsung s4 device.
The issue is that i cannot mount my SD card whilst in recovery mode.
It never appears on my windows 8 machine when i connect my device in recovery mode.
I have all the usb drivers for my device installed and that is how i originally put a rom on it when i was running a stock rom.
Now that i did a wipe i obviously cannot mount my device on a normal running stock rom because its removed and i am trying to install a new one.
How can i access and transfer files whilst in recovery mode?
Do i need any additional drivers?
Still cant mount. i notice ond evide manager it says the drivers are missing for SAMSUNG_Android yet i have installed samsung kais!
jonneymendoza said:
As teh title says i am using v2.5.0.0 of this recovery rom for my samsung s4 device.
The issue is that i cannot mount my SD card whilst in recovery mode.
It never appears on my windows 8 machine when i connect my device in recovery mode.
I have all the usb drivers for my device installed and that is how i originally put a rom on it when i was running a stock rom.
Now that i did a wipe i obviously cannot mount my device on a normal running stock rom because its removed and i am trying to install a new one.
How can i access and transfer files whilst in recovery mode?
Do i need any additional drivers?
Click to expand...
Click to collapse
Uninstall KIES and any other samsung usb installed utilities first.
Then download the official Samsung USB drivers for windows here: http://developer.samsung.com/board/download.do?bdId=0000000700&attachId=0000000001
After all the uninstalls are done reboot computer and install the official samsung usb drivers.
Once that's done reboot computer one more time and then your phone should and will
recognize your phone unless you have a bad cable or a non-functioning usb port in computer.
Good luck!

LG G2 all data wiped

Hi,
I'll did a factory reset with TWRP via advanced,by accident all partitions,including the internal storage partition.
Now my phone does nothing, but i''m able to boot in to TWRP.
When i'm connecting my phone to my computer i'll see a error with the driver. I'll installed the LG drivers from the website. But still see a error with the driver.
Error message: There is no compatible driver installed for this device.
I'll need to push a ROM to the phone, anyone a idea ?
Thnx in advance.
Device: LG G2 D802 International
From twrp you can mount usb storage (your sdcard or internal memory)
-dFx-
ArneNL said:
Hi,
I'll did a factory reset with TWRP via advanced,by accident all partitions,including the internal storage partition.
Now my phone does nothing, but i''m able to boot in to TWRP.
When i'm connecting my phone to my computer i'll see a error with the driver. I'll installed the LG drivers from the website. But still see a error with the driver.
Error message: There is no compatible driver installed for this device.
I'll need to push a ROM to the phone, anyone a idea ?
Thnx in advance.
Device: LG G2 D802 International
Click to expand...
Click to collapse
If you have a USB OTG cable, load ROM/gapps/etc onto a thumb drive and connect to your device. In TWRP, go to mount and select USB. Go back to main menu and select install. Scroll for USB and select files.
I'll solved the problem. I'll reinstalled the drivers, restarted my computer and the supporttool regonized my Phone again. I flashed the stock rom via downloadmode.
Thnx for your answer.
Sent from my GT-I9505 using XDA Free mobile app

SM-A500FU can't be detected by a PC, booting into recovery boots the system.

Hello,
I have installed a custom rom (Marshmallow) for my SM-A500FU through the adb. Now when I want to install a different rom I have to either boot into TWRP and I can't do that because booting into recovery simply restarts a phone, or I have to boot into Download mode and install it with the adb. The problem is that when the system is running, the phone simply charges, no Windows notifications or devices appear and when the phone is in Download mode Windows detects that a device is plugged in but can't recognize it. I have all the adb drivers, KIES and all that so it's not a problem. Can I somehow boot into TWRP or make Windows recognize my phone so I can use adb?
Thanks.
before installing a rom, have you wiped system, cache, dalvik and data? If yes try with a hard reset and if it doesn't work, too flash stock firmware
Hey,
yes, I wiped everything, I have flashed many roms earlier and I believe I have flashed it properly. I have managed to get into TWRP so I can actually flash FWs. I have only updated my rom to the newest CW13 build there is for my A5. Is there any way to flash a stock FW (for example a XEO KitKat) without ODIN? I can only use ADB through TCPIP and TWRP, so there is no way for me to flash it through ODIN.
Thanks.
so, if you press power+home+vol- it doesn't reboot in download mode, right?
It does boot into the Download mode. The problem is that when I plug the phone into my PC in Download mode it says that the USB Device is not recognized in Windows with 'A request for the USB device descriptor failed' error. When I plug it in when the phone is booted normally into android, it just charges, Windows doesn't see it at all.
whzq said:
It does boot into the Download mode. The problem is that when I plug the phone into my PC in Download mode it says that the USB Device is not recognized in Windows with 'A request for the USB device descriptor failed' error. When I plug it in when the phone is booted normally into android, it just charges, Windows doesn't see it at all.
Click to expand...
Click to collapse
Well, you can't flash samsung firmwares with twrp. Try flashing another rom through twrp
Alright, I have tried to flash multiple ROMs. Currently sitting on a Lollipop. Nothing changed, though. On every single ROM the problem still persists. It's not a problem with the PC as I've tried to connect my A5 to a laptop with freshly installed Windows and KIES and it behaved the same way as on my PC. The cable is fine as well, I have tested it with my old SGS3, it worked just fine on both my PC and laptop. Frankly, I have no idea what to do next, I'm starting to think that the port is physically broken. It's weird though, as I can still charge my phone and there is a response when the phone is in Download mode, just that Windows can't recognize it.
Try with adb command "adb reboot recovery" if it doesn't work you can downlaod odin mobile from play store and flash stock firmware!
Do you have odin for windows ?
zyxw-androidiani said:
Try with adb command "adb reboot recovery" if it doesn't work you can downlaod odin mobile from play store and flash stock firmware!
Do you have odin for windows ?
Click to expand...
Click to collapse
Yes, ihlf his device can boot he can use mobile odin. Have you tried with other PCs, just to see it isn't a problem of your pc?
In my experience usb device descriptor errors are related to the specific PC the error occurs on due to device driver conflicts, but if you get the same error on another pc then it could be the hardware.
I'd certainly be trying another cable first on a fresh PC.
Anyway regardless of all that you can flash the stock firmware with FLASHFIRE available on play as long as you have root.
Sent from my SM-T280 using XDA-Developers mobile app

Can't flash TWRP via Odin SM G900F

Can't flash TWRP on my S5 SM G900F.
-Auto Reboot is unchecked on Odin.
-I've used Odin 3.07/3.09/3.10.
-Reactivation Lock is OFF
-USB debugging is checked.
-I've tried with TWRP (TAR obviously) 3.1 and 3.0.
Am I missing something?
robertofelce said:
Can't flash TWRP on my S5 SM G900F.
-Auto Reboot is unchecked on Odin.
-I've used Odin 3.07/3.09/3.10.
-Reactivation Lock is OFF
-USB debugging is checked.
-I've tried with TWRP (TAR obviously) 3.1 and 3.0.
Am I missing something?
Click to expand...
Click to collapse
silly question have u installed drivers on pc first if not reboot to download mode and let it install drivers i never had to touch any of the settings for it to work if that dont work then try Odin3 v3.11.1
ireaper4592 said:
silly question have u installed drivers on pc first if not reboot to download mode and let it install drivers i never had to touch any of the settings for it to work if that dont work then try Odin3 v3.11.1
Click to expand...
Click to collapse
Drivers are installed. I flashed a recovery on a Galaxy S3 not so long ago and everything went fine. That's the reason I posted this thread. I do not know what else to do.
On download mode there are some things like "Download mode secure" "CBS Enabled". It has something to do?
I also have the same problem.. followed every possible guide and no matter if I successfully flash with odin, heimdall or from twrp flash app as root.. when booting my S5 immediately into recovery with volup+home+pwr it will always show the old recovery and not twrp!! Is it readonly and just acting to be flashed or what?? Some carrier might have locked the recovery preventing flashing? It's a SM-G901F klte from swissmobile...
thnks for any answer/suggestion.
Your bootloader is unlocked right?
what do you mean with unlocked?
is there a way to verify it?
and most importantly to unlock it?
Just Uncheck Auto Reboot on Odin
No autoreboot of course i unchecked and do manuale Direct boot to recovery
Anyone knows how to check if the recovery partition is protected
i have the same problem please anyone can help?
I solved it by using a short usb cable, no usb3 ports, only usb2, maybe you try different ones on your laptop/pc, also avoid any hub in between. It's incredibly picky!

Categories

Resources