Database Users

HELP! Stuck on Setup Wizard P9 Lite (VNS-L31)

hey guys,
i think i made something really stupid.
-unlocked bootloader
-installed TWRP
-rooted
everthing was fine B161.
installed apps2sd and did something there so my phone was stuck in bootloop.
now the stupid part:
i wiped everything in TWRP... system, internal storage everything... i am such a douchebag!
I tried to recover with eRecovery and install stock firmware B161. Update process was successful and i can start my phone again.
but everytime i start the setup wizard i am stuck after wi-fi+ service (enhanced internet expierence) the screen shows "checking data.." for 1 second and switched back to wi-fi+ service.
is there anything i can do? guys help me please i am starting to freak out.
is my guarantee voided after i unlocked my phone?
fastboot shows
-phone locked
-frp locked
THANKS FOR ANY HELP!

khajiit said:
hey guys,
i think i made something really stupid.
-unlocked bootloader
-installed TWRP
-rooted
everthing was fine B161.
installed apps2sd and did something there so my phone was stuck in bootloop.
now the stupid part:
i wiped everything in TWRP... system, internal storage everything... i am such a douchebag!
I tried to recover with eRecovery and install stock firmware B161. Update process was successful and i can start my phone again.
but everytime i start the setup wizard i am stuck after wi-fi+ service (enhanced internet expierence) the screen shows "checking data.." for 1 second and switched back to wi-fi+ service.
is there anything i can do? guys help me please i am starting to freak out.
is my guarantee voided after i unlocked my phone?
fastboot shows
-phone locked
-frp locked
THANKS FOR ANY HELP!
Click to expand...
Click to collapse
did you do factory reset? I had some weird stuff going on after recovery, so I booted back to factory reset (vol + and power), after that it worked OK.
Once you requested the bootloader unlock key, your warranty might be void from that point (depends on country). The bootloader gets locked after flashing official firmware via eRecovery though.

yes i did a factory reset, still can't proceed after wi-fi+ configuration.
is there anything else i can do?

I have one question: is it possible with
-frp locked
and
-phone locked
to downgrade via eRecovery? (to b130 or something..)

I have the exact same problem.
I bought it 3 days ago, and suddenly yesterday downloaded Apps (from the Play Store) stopped working. So someone told me to hard reset it. I got into EMUI and did it. Then I rebooted it and now it stuck there. Can't complete the setup wizard.

I found no solution to my problem after reading google & xda-forum for 3 days. Tried everything... nothing worked. Sent it back and (luckily) got a new one. Now i'm more careful for sure.

The store I bought it from claimed that they had numerous similar complaints about the 3gb version. Which is the one I have. They told me I should take it back and that they will give me a new 2gb version along with any difference in money. We will see.

Exact same thing with me stuck at setup wizard so had to send it off for warranty and got a brand new phone yesterday
Sent from my HUAWEI VNS-L31 using XDA-Developers mobile app

Help please my Huawei P9 cannot proceed afta WiFi setting it is stuck on "Checking info "and Reply saying "Couldn't sign in"

The problem is Android System Webview, it's not a system app in this rom and when you reset your phone it deletes it, happened the same to me, I had to go to a huawei center, they menaged to skip the initial setup and I've installed the apk from apk mirror. Without this app the phone can't login in your google account, so if you don't install it your gapps won't work

Maxai94 said:
The problem is Android System Webview, it's not a system app in this rom and when you reset your phone it deletes it, happened the same to me, I had to go to a huawei center, they menaged to skip the initial setup and I've installed the apk from apk mirror. Without this app the phone can't login in your google account, so if you don't install it your gapps won't work
Click to expand...
Click to collapse
Hello,
does ist really work? Is it just installing the androidsystemview.apk and the phone works fine again?

huawei p9 lite bricked ...please i need a help
my phone stoped in fastboot...
phone locked
frp lock
i can´t enter on recovery mode and he not pass the huawei icon ...
please i need help
i do not connect phone to pc ....

contact me to solve the problem

I'm having exact problem with my mate 8 NXT-L09, after i had to factory reset when update from firmware finder failed. Anyway to bypass this problem? Do you have a way of add Android System View into the mate 8 during the bootup process. I love this mate 8 phone and 5 days now i has been torture.

logjam said:
I'm having exact problem with my mate 8 NXT-L09, after i had to factory reset when update from firmware finder failed. Anyway to bypass this problem? Do you have a way of add Android System View into the mate 8 during the bootup process. I love this mate 8 phone and 5 days now i has been torture.
Click to expand...
Click to collapse
Reflash the rom you were on using the "dload" method

dariomrk said:
Reflash the rom you were on using the "dload" method
Click to expand...
Click to collapse
Sorry, dont have the previous ROM, I boiught it off someone and they probably did the first update. The factory reset should reset to huawei original but i think this is where my problem sits.
HARDWARE VERSION=NEXT_L09_VN2
BOOTLOADER VERSION=NXT-C900B120_FASTBOOT
KERNEL VERSION=NXT-C900BB140_BOOT
AP VERSION=NXT-C900B140_SYSTEM
CP VERSION=21.750.08.00.010(balong)
Parameter Version:
P-00.00.000 G-17.V271.371 E-40.01.000
does anyone have an international rom for this or any version that can work.

The way i was able to factory reset was
1. going to huawei site. "consumerDOThuaweiDOTcomSLASHjmSLASHsupportSLASHdownloadsSLASHindexDOThtm"
change slash to / and dots to .
2. Select options for your phone, mine was NXT-L09. Will show "HUAWEI Mate 8 Firmware(NXT-L09, Android 6.0, EMUI 4.0, C605B100, Latin America, Channel-Others)"
3. Download, extract onto sdcard in dload folder, restart phone using vol up & vol down & power.
4. phone will complete boot restart but will then loop the boot process.
5. Do factory reset again
6. After huawei logo, different options show and you are then ok to proceed to login to your google account and setup refreshed phone.
Now on NXT-L09C900B100 build, if anyone has nougat rom for this, please share.

For future reference, if anyone gets stuck with this on P9 lite, indeed the instructions provided by Huawei point to VNS-L11C432B161, which doesn't include Android webview and therefore initial setup cannot proceed. The solution is to flash B210 on top of B161:
update.hicloud.com:8180/TDS/data/files/p3/s15/G1164/g104/v80562/f1/full/update.zip
which allows you to pass setup as the bug has been fixed. No root/unlock/twrp required.

I can't install any ROM and i have no backup (or OS)

Hey! First thing you need to know: i'm stupid af
So yesterday i tried to root my Huawei P9 Lite VNS L31, and everything was doing great: bootloader unlocked and everything.
Because the root didn't seem to work on EMUI, i tried to install another ROM (i'm stupid) with TWRP: so I wipe cache, system and data in order to do it good, i flash the ROM but now when i tried to reboot it didn't boot.
So i figured that i was trying to install a MM Rom on an Nougat (at least it was) device. I then tried another ROM and i didn't work either. After hours of trying to make it work, now it boots on Huawei eRecovery, but i already tried to use it since i made no backup (i'm an idiot), and it seems to fail every time? idk it only show a big red ! mark
Right now i'm still looking for a fix but i would be soooooooooooooooooooo freaking relieved if someone could help me please :crying:
(i'm an idiot)

I DID IT!!!!
So i followed a tutorial made by the website androidmtk (i can't link it it's my first post), and is used the official stock firmware for my phone which you can find on cusumer huawei dot com
DONT FORGET TO BACKUP!!!!!!!!!!!!!!

Recovery bricked after Nougat update?

First excuse me for opening an other thread like this, i think i have read all other threats regarding my problem, but none have the same situation
My Huawei M3 Wifi (BTV-W09) seems semi bricked after installation of Nougat Update.
The Installation (Force Install with dload) gave me an error and also while boot i got the error message: "Your device has failed verification and may not work properly."
I have the option to press "Powerbutton" and the device will boot up. I checked the Version and it showed android 7 + EMUI 5. The only problem was that almost every system app was missing, like keyboard, calendar etc. (playstore was there)
So i tried to do the rollback with:
HUAWEI MediaPad M3 8 Rollback Package%28BTV-W09 %2CC900B300%2C EMUI5.0%2BAndroid7.0 rollback to EMUI4.1%2BAndroid 6.0%29
The Installtion (force update) gets stuck at 5% and after like 3-5 minutes the tablet will boot up showing the same boot error that can be skipped with pressing powerbutton. I checked sytem and it still showed "android 7 + EMUI 5" but built : BTV-W09C900B300
I think this is the one i "need" to be able to install the "HUAWEI MediaPad M3 8 Firmware %28BTV-W09 %2CC100B006%2C EMUI4.1%2BAndroid 6.0%29"
Problem is regardless which "update.app" i try to force install will get stuck at 5% and give me same error. I have ADB/Fastboot installed and tried some different things like flashing/unbricking it with "Huawei Multitool" where you can extract like boot.img or recovery.img and try to flash it.
Also getting an error. I can access eRecovery witout problems, the option to fix it by itself by wifi doesn`t work. I can´t access "normal" recovery and i think there is the problem (may got bricked while flashing Nougat?) I think its recovery problem, cause when i boot it up to the "half-installed" Android and go into setting "hard-reset" option i know it would boot up intoi recovery and would erease everything, while bootup it shows error "reset failed".
In fastbootmode i see bootloader: unlocked FRM: unlocked
I tried to install TWRP recovery with adb but get error: adb remote command not allowed
I downloaded like 15 different Android Versions 6+7 Emui 4.1+5 to try with force update but none worked, may i have to flash special version of recovery first?
I just want a normal version of android 6 or 7 i dont mind but at the moment with half working 7 "without" systemapps its a hardtime.
I hope someone can help me.
This isnt my first android device and im not a total noob i unlocked bootloader and flashed kernels on many other phones but with the W-09 where i did nothing special i dont get why "recovery got broken"
Thanks in advance

You haven't read other threads too well: more times people reported that the bootloader got locked after an update still declaring itself unlocked!
Second thing you have not found: the Nougat update consist of 2 packages and the second must be installed from TWRP.

nicolap8 said:
You haven't read other threads too well: more times people reported that the bootloader got locked after an update still declaring itself unlocked!
Second thing you have not found: the Nougat update consist of 2 packages and the second must be installed from TWRP.
Click to expand...
Click to collapse
thanks for your anwser, i read that so i also tried unlocking it "again" and it quotet it is also unlocked in adb. I also know that there are 2 packages. That you need TWRP i didnt know thanks so i am a bit smater now. I think i ll try "relock" and unlock it again might be the right way, thanks for the tip.

kivi90 said:
I think i ll try "relock" and unlock it again might be the right way, thanks for the tip.
Click to expand...
Click to collapse
This is nonsense. Unlock, install the right TWRP then install the second zip package.

nicolap8 said:
This is nonsense. Unlock, install the right TWRP then install the second zip package.
Click to expand...
Click to collapse
i cant unlock cause i dont have the code, on the huawei page i try do make an account and get the code by providing the necessary information.
I just uploaded a picture, i choose "before EMUI5" cause this is the only option i can choose "tablets". --> i choose "tablet wifi" , enter product model "BTV-W09" then the serialnumber i can see in setting: 28D6R17316XXXXXX but then i have the problem to input product id, it say i can get it through "Dialer" app (which i dont have in wifi model ) or the calculator. Problem is in my damaged installation there is no huawei calc, other calcs from store dont work (read that problem in other threats) I tried many apps from appstore to get a product ID but huawei site keeps saying wrong product ID =/
With the program DC Unlocker i am able to see a MEID i dont know if its the right one, i tried my luck with the Product ID Generator from Huawei but it doenst work. (device not supported)

It's very strange that it says bootloader unlocked if you have never unlocked...
And was very stupid to try to installl a beta release without before unlocking and taking a backup.
Exhange your device for a Nokia 3110!

nicolap8 said:
It's very strange that it says bootloader unlocked if you have never unlocked...
And was very stupid to try to installl a beta release without before unlocking and taking a backup.
Exhange your device for a Nokia 3110!
Click to expand...
Click to collapse
yeah at this device i never touched bootloader, i didnt think it would become such a big deal , i didnt want unlocked bootloader or other recovery just newest android. Never had any problems with the "force update function" to come back to stock. I tried DC Unlocker but cant get further cause device need to get into manufature mode (thorugh dialer or calculator which i both dont have) i hope maybe i find one more way.

Did you ever find a fix
Did you ever find a way to fix this. I'm in the same situation. I even did a VPN on my router to give me a Hong Kong address for erecovery and that still didn't work. I have the exact same product. Like you I tried to various attempts to download a new recovery, but nothing works. Nice hardware, but some of the worst software/firmware I have ever dealt with since starting with the first release of Android on the HTC Hero.

kivi90 said:
yeah at this device i never touched bootloader, i didnt think it would become such a big deal , i didnt want unlocked bootloader or other recovery just newest android. Never had any problems with the "force update function" to come back to stock. I tried DC Unlocker but cant get further cause device need to get into manufature mode (thorugh dialer or calculator which i both dont have) i hope maybe i find one more way.
Click to expand...
Click to collapse
I had mostly the same problem. I rolled back to 4.1 using the rollback and the actual 4.1 update.app. I think that puts you on C100 if I remember right. Tablet I have is C128 (USA) but no problem for this step. Get the Product ID from the calculator. Allow OEM unlock in the settings, then unlock it using the unlock code. Email yourself the unlock code because who knows if their website will even be functional next time. Alternatively you can extract the stock calculator from the update_data_usa.zip or whatever and try to use DC with 5.0. That second update zip does not install properly via the dload method, so a bunch of stock apps don't get installed. You can kind of hack it and flash it via TWRP but I didn't do it that way.
Or...you can use firmware finder to force an OTA from 4.1 right up to 5.0 (350), then take that last partial OTA to 351 after as well. The way to do that is via DNS in firmware finder. Find the Full OTA in firmware finder you want, send it to the updater by changing your DNS the way it tells you to, and when it does the OTA, everything will be properly installed basically the official way. Good as new. Flash TWRP to recovery2 and replace the erecovery. Keep the stock recovery as is. Install magisk. Golden.
---------- Post added at 03:36 AM ---------- Previous post was at 03:26 AM ----------
kivi90 said:
So i tried to do the rollback with:
HUAWEI MediaPad M3 8 Rollback Package%28BTV-W09 %2CC900B300%2C EMUI5.0%2BAndroid7.0 rollback to EMUI4.1%2BAndroid 6.0%29
The Installtion (force update) gets stuck at 5% and after like 3-5 minutes the tablet will boot up showing the same boot error that can be skipped with pressing powerbutton. I checked sytem and it still showed "android 7 + EMUI 5" but built : BTV-W09C900B300
I think this is the one i "need" to be able to install the "HUAWEI MediaPad M3 8 Firmware %28BTV-W09 %2CC100B006%2C EMUI4.1%2BAndroid 6.0%29"
Problem is regardless which "update.app" i try to force install will get stuck at 5% and give me same error.
Click to expand...
Click to collapse
Also, as far as the rollback, you need to do the first one (the C900 which is just a compatibility fix to allow rollback, previously used by beta testers I believe). Then you need to do the second one, the C100. If it is getting stuck, try downloading it again and be sure you don't have anything else in the /dload directory on either internal or the sd card. I had one on both at one point so maybe that happened to you. The C900 should be very quick but the C100 will slowly progress after 5% all the way around in several minutes.
When you get to updating back to 5.0, you can choose whichever region you want as long as it is a full OTA. C128 is USA and that's what I bought so that's what I picked. That gets you back in the right OTA update channel after that.

Hi guys,
I started as a novice and have learnt the hard way.
Has anyone tried rollback to EMUI 4.1 EU version on a US device (W09) and are there any problems I should be aware of?
I have had the exact same problem shared in this thread and have gone through the pain of finding a solution. My last resort is to rollback to 4.1 and restart the whole process.
@deV14nt: you suggested that when updating back to EMUI 5.0, I can choose the region even if my EMUI4.1 is EU version. How does this work?
Thanks in advance for your help.

How to make my VNS-L21 C432 B503 EMUI 5.0.3 Single-Sim to a Dual-SIM?

Hello everyone,
i would need help - if its possible anyway - to get the Dual-Sim working on my SS P9 lite.
Until now i was able to unlock BL, install TWRP Elite and SuperSU 2.82.
What do i have to do next?
Thank you in advance...
(PS: flashed some oeminfo - did not work, so i flashed back my original bached up oeminfo -
strange thing is that *#*#2846... is not working anymore - i recognized that because i wanted to
reinstall from HWOTA mode...? Should i orry about that?)

crouso said:
Hello everyone,
i would need help - if its possible anyway - to get the Dual-Sim working on my SS P9 lite.
Until now i was able to unlock BL, install TWRP Elite and SuperSU 2.82.
What do i have to do next?
Thank you in advance...
(PS: flashed some oeminfo - did not work, so i flashed back my original bached up oeminfo -
strange thing is that *#*#2846... is not working anymore - i recognized that because i wanted to
reinstall from HWOTA mode...? Should i orry about that?)
Click to expand...
Click to collapse
Hello,
had you already took a look at @k1ll3r8e's thread ?
He made a toolkit that can do what you need.
Best regards
Edit:
Dude you can do that also without the toolkit.
You only need the right oeminfo dual sim
and the correct rom.
Feel free to ask...

hello dadditz,
thank you for your reply! Of course i read a lot here and other sites, and also found the P9 toolkit! But my problem was/is, that i cant "upgrade" to VNS-L21C432B160 because i already was on VNS-L21C432B503 ... so i tried different things, but it did not work. Always the menue "Dual sim configuration" was not in the settings menue... and the image felt little bit "laggy"...
BUT
i was giving it another try - i downgraded from Nougat to MM with this ... tutorial and repeated the steps listed in the P9 lite toolkit... and now i have the Dual-Sim menue in the settings dialogue... and it is working
Because its not "enough" i wanted to return to Nougat - until now with no success... so am i now stuck on VNS-L21C432B160 ?
I tried some images from 380/370/336 but the huawei recovery always stops on 5% and denies the update - how can i upgrade again?
kind regards

crouso said:
hello dadditz,
thank you for your reply! Of course i read a lot here and other sites, and also found the P9 toolkit! But my problem was/is, that i cant "upgrade" to VNS-L21C432B160 because i already was on VNS-L21C432B503 ... so i tried different things, but it did not work. Always the menue "Dual sim configuration" was not in the settings menue... and the image felt little bit "laggy"...
BUT
i was giving it another try - i downgraded from Nougat to MM with this ... tutorial and repeated the steps listed in the P9 lite toolkit... and now i have the Dual-Sim menue in the settings dialogue... and it is working
Because its not "enough" i wanted to return to Nougat - until now with no success... so am i now stuck on VNS-L21C432B160 ?
I tried some images from 380/370/336 but the huawei recovery always stops on 5% and denies the update - how can i upgrade again?
kind regards
Click to expand...
Click to collapse
Hey,
I think you could save yourself from going back
at MM, but, the omelette is made now ...
Have you already done a factory reset + wipe cache in stock recovery ?
Tell me a little bit when you reboot the device
does any warning text come out ? if yes, what color ?

Dadditz said:
Hey,
I think you could save yourself from going back
at MM, but, the omelette is made now ...
Have you already done a factory reset + wipe cache in stock recovery ?
Tell me a little bit when you reboot the device
does any warning text come out ? if yes, what color ?
Click to expand...
Click to collapse
Well, when i was on Nougat, i was not able to see the "Dual Sim Settings" in the settings menue - i tried 20 times
i think... when i went "back" to MM the menue was immediately there...
I did the factory reset and wiped cache in stock recovery menue.
Booting up my device seems all fine - bootloader is relocked, no warnings or anything...
HiSuite told me that my device "has the latest developer version" and no upgrade would be available...
I tried to flash the firmware with TWRP - without success...; when i try dload the phone stuck on 5%... i also
tried the "-PV" versions - without any luck...
So i really have no idea left how to upgrade from this version?!

crouso said:
Well, when i was on Nougat, i was not able to see the "Dual Sim Settings" in the settings menue - i tried 20 times
i think... when i went "back" to MM the menue was immediately there...
I did the factory reset and wiped cache in stock recovery menue.
Booting up my device seems all fine - bootloader is relocked, no warnings or anything...
HiSuite told me that my device "has the latest developer version" and no upgrade would be available...
I tried to flash the firmware with TWRP - without success...; when i try dload the phone stuck on 5%... i also
tried the "-PV" versions - without any luck...
So i really have no idea left how to upgrade from this version?!
Click to expand...
Click to collapse
Use Firmware Finder to force the upgrade, download it from the store.
VPN method worked fine for me (i was on android 7).
Inside the app all the info, anymore
a thread is present here on XDA.
Give it a try...
You're on B160, go for B370 PV version, check compatibility otherwise choose for full ota one.
Good luck
Cheers

Huawei P9 lite L31 brick. I need Help!

Hello all,
recently I got a used Huawei P9 lite VNS-L31 single SIM.
At the beginning it was branded with the Telekom Software (C150). I tried to debrand it with a guide I found on the internet.
Every thing went well but I noticed that the Buildnummber says: VNS-L31C900B161. Because I did it with the downgrade method with Test-keys package i guess.
The Problem is that I was trying to flash a Nougat update with the 3 Button method but during the installing procces I noticed that the package I flashed was the rollback package again.
So the Problem now is that I can't boot to bootloader, recovery and also the 3 Button method to flash a full firmware does not work.
The bootloader is locked (DC Unlocker doesn't recognize the phone so I cant get a code from there)and I guess I have to replace the Motherboard to get the phone working, but before I do that I thought I can ask here if there is any solution I that I can try.
Sorry for my bad English.
Hope that anyone has an Idea