i am using AO5510 with cm12.1 official, bcoz i need sim switches most of times,
when i come to know about LINEAGEOS MASCOT+ voLTE, i tried to root with kingroot,as it shows AO5510 success rate in first screen , but not so happened and empty files like debuuger_real and su are added in bin and xbin.
now if i install twrp with pc and root with supersu.zip
and then install lineageos 13 april 1 build,
then can i revert back to cm12.1 official via fastboot from lineageos 13 without bricking my AO5510 or not.
Related
Hi all! I'm new here (at least at account level) and with my first thread I want to help people which can't flash 6.0+ roms in official 2.8.x TWRP for our Moto X 2013 (like @dziarski in TWRP 2.8.7.0 thread).
I have Moto X 2013 (XT1052 model for reference) and I unlock bootloader, root and put costum roms not so long ago but here out to resolve this.
You need to upgrade your TWRP because TWRP <3.x don't support 6.0+ rom flashing well (edit: mochi579 below report twrp 2.8.7.0 can work for flashing too even I recommend latest 3.0.x version for avoid all problem especially with 7.x roms). I advice you to check out unofficial TWRP 3.0.2-0 by fantastic TeamMEX here.
This updated version grant you to flash both 6.0+ and 7.0 roms (tested myself) without any error.
There are my ROMs test to try this TWRP:
Legenda: (Android version)
TWRP 2.8.6.0 official:
Resurrection Remix 5.7.4 (6.0.1) -> failed immediately with this error
Code:
E: Error executing updater binary in zip "/..."
Error flashing zip "/..."
After some research I understood I need to updated my TWRP and here's the result
TWRP unofficial 3.0.2-0 by @TeamMex:
RR 5.7.4 (6.0.1) again -> succes without problem (I use right now)
CM13 (6.0.1) -> succes
CM14 (7.0) -> succes
OctOS Oct-M (6.0.1) -> succes
Xperience 11.0.0_rxx (7.0) -> succes
All succes without any error during flashing.
Just in case I want to add my step even its very common:
1) Make a NANDroid backup if I don't have it already
2) Wipe Cache, Data, System, ART/Dalvick cache
3) Optional factory reset (cache,art/dalvik and data)
4) Flashing ROM + Gapps from OpenGapps (remember to select ARM)
5) Reboot and finish
If there's a problem in the post or its wrong place (its here or Q&A) please let me know
Thank you WOrld1. But I'm flashing cm13, cm 14 & xpe 11 using TWRP 2.8.7.0 and it's working perfect except some known bugs.
mochi579 said:
Thank you WOrld1. But I'm flashing cm13, cm 14 & xpe 11 using TWRP 2.8.7.0 and it's working perfect except some known bugs.
Click to expand...
Click to collapse
Hi,
I was using 2.8.6.0 because in the root thread by Kidjoe here in General he write about a possible read error about SD card in the phone (clearly a bug because we don't have it xD), so my experience with 2.8.7.0 is zero unfortunately but I think it's very similar.
I have zero problem flashing the rom I listed, for various reason some mod I flashing more than one time (never because flashing problem, usually rom itself problem or just jumping back and forth).
I flash xperience 2 times, cm13/14 and OctOS one time and Resurrection Remix many times if we include backup when coming back from these ROMs.
The only know bug I experienced in 3.0.2-0 is slow flashing in "normal" condition. Just follow the note in the op of recovery thread:
Code:
NOTE: If you have slow format on ext4 go to Settings->Use rm -rf instead of formatting
Copy pasted from TeamMEX thread.
You need Kingroot apk file to Root without PC
Install and Open Kingroot application to Root. Press click to root and then wait for your mobile to get rooted, that's it You have successfully rooted your Lenovo vibe k5 plus without PC :laugh:
Now you can remove Bloatware applications and can tweak your mobile for better performance
:fingers-crossed: After Rooted your Lenovo vibe K5 Plus you need following files to Flash TWRP recovery.
1) Flashify
2) TWRP flash file
Now, Install and open flashify find Recovery image and select downloaded img file and Press next
Voila!
You have successfully rooted and flashed TWRP Recovery without PC
Now you can install following custom ROM to your Lenovo vibe k5/k5 plus
1) AOKP Custom ROM(OFFICIAL) (Nightly)
2) CM14 (UNOFFICIAL)
3) BEANSTALK 7.1 (UNOFFICIAL)
Man! Big thanks for that technique, worked like a charm on my Vibe K5 plus. Note that you don't need Flashify if you only want root access
risko94 said:
Man! Big thanks for that technique, worked like a charm on my Vibe K5 plus. Note that you don't need Flashify if you only want root access
Click to expand...
Click to collapse
OP said that after rooted to flash twrp
Sent from my Lenovo Vibe K5 Plus using XDA Labs
pradeesa said:
You need Kingroot apk file to Root without PC
Install and Open Kingroot application to Root. Press click to root and then wait for your mobile to get rooted, that's it You have successfully rooted your Lenovo vibe k5 plus without PC :laugh:
Now you can remove Bloatware applications and can tweak your mobile for better performance
:fingers-crossed: After Rooted your Lenovo vibe K5 Plus you need following files to Flash TWRP recovery.
1) Flashify
2) TWRP flash file
Now, Install and open flashify find Recovery image and select downloaded img file and Press next
Voila!
You have successfully rooted and flashed TWRP Recovery without PC
Now you can install following custom ROM to your Lenovo vibe k5/k5 plus
1) AOKP Custom ROM(OFFICIAL) (Nightly)
2) CM14 (UNOFFICIAL)
3) BEANSTALK 7.1 (UNOFFICIAL)
Click to expand...
Click to collapse
But after reboot twrp is gone and stock recovery appears how to flash it permanently
fazil irfan said:
But after reboot twrp is gone and stock recovery appears how to flash it permanently
Click to expand...
Click to collapse
Have you flashed twrp using flashify app??
I don't think it will not go back to stock recovery.
pradeesa said:
Have you flashed twrp using flashify app??
I don't think it will not go back to stock recovery.
Click to expand...
Click to collapse
Ok, thanks man
pradeesa said:
You need Kingroot apk file to Root without PC
Install and Open Kingroot application to Root. Press click to root and then wait for your mobile to get rooted, that's it You have successfully rooted your Lenovo vibe k5 plus without PC :laugh:
Now you can remove Bloatware applications and can tweak your mobile for better performance
:fingers-crossed: After Rooted your Lenovo vibe K5 Plus you need following files to Flash TWRP recovery.
1) Flashify
2) TWRP flash file
Now, Install and open flashify find Recovery image and select downloaded img file and Press next
Voila!
You have successfully rooted and flashed TWRP Recovery without PC
Now you can install following custom ROM to your Lenovo vibe k5/k5 plus
1) AOKP Custom ROM(OFFICIAL) (Nightly)
2) CM14 (UNOFFICIAL)
3) BEANSTALK 7.1 (UNOFFICIAL)
Click to expand...
Click to collapse
Pls help iam new to this, i want to flash lineage os to my phone but don't u think I'll lose root access as i wipe cache, data and system during flashing as uninstalling kingoroot app means no root
fazil irfan said:
Pls help iam new to this, i want to flash lineage os to my phone but don't u think I'll lose root access as i wipe cache, data and system during flashing as uninstalling kingoroot app means no root
Click to expand...
Click to collapse
When you wipe cache, system, and data it wipe whole stock ROM and then you can flash Linage OS or any other custom ROM to enjoy....
Through kingroot you can flash TWRP another this there is no role of kingroot....
Ｄｈｒｕｖ said:
When you wipe cache, system, and data it wipe whole stock ROM and then you can flash Linage OS or any other custom ROM to enjoy....
Through kingroot you can flash TWRP another this there is no role of kingroot....
Click to expand...
Click to collapse
Thanks again..
Please help! My phone is not booting, after using Kingroot!
It's stuck on Lenovo screen!
The phone booted up after quite some time. There's this issue in which the green LED light keeps on blinking everytime even if I don't have notifications. Is there a fix?
neil.richard said:
Please help! My phone is not booting, after using Kingroot!
It's stuck on Lenovo screen!
The phone booted up after quite some time. There's this issue in which the green LED light keeps on blinking everytime even if I don't have notifications. Is there a fix?
Click to expand...
Click to collapse
Reboot
Hi Guys,
I have a unique problem. I have a Redmi 2 Indian version. My device is not rooted. I have flashed custom recovery TWRP 3.03 and Lineage OS 14.1 on it. I had not rooted my device before flashing rom and recovery. How to root it now? All the tutorials I see are for miui rom.
What I have already tried -
Tried to install UPDATE-SuperSU-v2.40.zip through TWRP.
If I try this, my device gets stuck at Lineage OS logo
Please help.
Use a more recent SuperSU package,v2.78 or you can use superuser provided on lineage downloads site under Extras
So Phone model : a500F
Previous version 5.0.2
Rooted
TWRP 3.0.0.1
I tried flashing many roms like Aryamod, Ressurection remix ( both N & M ) and Lineage OS
The only on that flashed successfully is Lineage but when I try to reboot it restarts back to TWRP
The other roms doesn't flash as it gives Error 7
Any ideas ?
Try v 3.0.2.1. Also go to specific thread and read this has a solution and I think there is no need to create a separate thread for that. There is even a zip that you can flash to get out of the twrp loop as I would call it.
So im trying to root my oneplus 5 and i started off by using Lineage OS but i wasnt too happy with it and i liked Oxygen OS much better so i decided to go back to it and while doing so like an idiot i wiped everything in twrp including the storage with all my ROM files and the phone was bricked and after a long struggle i used the unbrick tool which is called MSM tool which installed oxygen 4.5.8 using some some Qualcomm mode or something and it booted and worked fine but ever since i wasnt able to download the oxygen 5.1.1 update through the phones update section, it reaches 100% and says signature verification failed and goes back to 5%. So i tried downloading the latest Open Beta from the OP site and tried local upgrade which said installation failed so i try installing it locally through the Oxygen Recovery but again Installation failed so i try unlocking the bootloader again and installing it through twrp and it just keeps showing the boot animation forever( i know people say be patient but i waited for 20 mins+). So i decided to use the unbrick tool again and now im stuck on the OOS 4.5.8 unable to update the phone.
I tried to flash the latest oreo through twrp several times and just tried flashing it through so many ways where none worked , even adb sideloading it worked till 47% and said installation failed and everytime this happens i have nothing left to do but use the tool and unbrick it again and this takes so much time as i have to unbrick and then do the first setup and then go to fastboot and unlock the bootloader and do the setup again and transfer the files and then install twrp and flash.
Nothing has worked so far
And now even when i go back to the 4.5.8 stock after unbricking for some reason it just doesnt connect to any wifi , it just says Connecting and then saved and then disabled and repeat, only my mobile data works.
I tried to flash lineage again but got an error 7 with it or something and im back to the stock unbricked state without wifi and all i can do is unlock bootloader and install twrp.
If anybody has any suggestions and can help me please do so immediately. I require my phone urgently and need to fix this fast.
Thank You !
(btw im in India and do local service centres fix such issues?)
Make sure you use newest twrp. And also flash firmware for 5.1.1
Vika__ said:
Make sure you use newest twrp. And also flash firmware for 5.1.1
Click to expand...
Click to collapse
i am using the latest codeworkx twrp 3.2.1 and when should i flash firmware? can you just give the process i should do? stuck at 4.5.8 without wifi with twrp and unlocked bootloader
Wipe everything except internal storage, after that click format data and type "yes" to accept. Then download oos 5.1.0 firmware from here https://sourceforge.net/projects/cheeseburgerdumplings/files/15.1/cheeseburger/firmware/ and lineageos 15 (or any rom you want now), gapps and move all 3 packages to your phone. Flash firmware first and then reboot to recovery. Then flash rom or gapps and reboot
You have to flash the latest TWRP from twrp.me, then download the latest OxygenOS build. Reboot into TWRP, wipe data, cache, system and flash the latest build, then just go to wipe > format data, type "yes" and reboot
Lol man your OP5 is not bricked, if you can boot on TWRP, you can install all that you want
I advise to Format Data/Storage, Wipe everything and install xXx 10.7 (OOS Custom with a great Aroma installer), choose decrypted, it's better if you want swtich rom in the future AOSP > OOS > AOSP
bro i have same probleme after install any rom custom or official , always stuck on boot logo , any solution ?
no solution??