Related
As I am using the below mentioned OS version and Radio. I have a call barring for all outgoing INTERNATIONAL calls. Whenever I need to dial an int'l call. Thru the built-in selection for disabling the bar code, this options pops an error saying to check my phone settings!
But when I use the dial buttons to press the keys combination which my ISP provides #331*----# (dash are digits), this works on the spot in either cases, the on and off!
Any help
hello,
i have t-mobile mda II (under wm5 ,i think software is O2),
does anybody know standard password for this phone? i'd like to change CALL BARRING SETTINGS, i need CALL BARRING PASSWORD.
thanks.
as wm5 is not offical
i doubt it's a real o2 rom
and CALL BARRING sounds
very very much like something
put in the sim rather then on the
phone
Hi everybody.
Here is my problem:
In Portugal, as in other countrys, the Network Operator, provides a code (e.g. *#123# for TMN), so the users can check their current balance without having to call the operator. Instead by dialing the code, the network sends back a message to the phone, with that information.
The procedure is as follows
Open the dialer
Insert the code (in my case *#123#)
Press Send (the green button)
Whenever I tried to do this, a baloon pops from the network status icon with the message "Waiting" and a OK button, and it just stays there endlessly, untill i get tired of waiting and press the ok button.
Now, I believe this function worked in WM2003SE, when I had a Magician, but that was a long time ago, so I'm not sure of this.
Well, the fact is that it's not working in WM5/6/6.1 in my Trinity. I've even tried with the official WM5 ROM, but no success.
Does someone know how to make this work, or even if it's still possible?
Thanks in advance
FInixNOver
FInixNOver said:
Hi everybody.
Here is my problem:
In Portugal, as in other countrys, the Network Operator, provides a code (e.g. *#123# for TMN), so the users can check their current balance without having to call the operator. Instead by dialing the code, the network sends back a message to the phone, with that information.
The procedure is as follows
Open the dialer
Insert the code (in my case *#123#)
Press Send (the green button)
Whenever I tried to do this, a baloon pops from the network status icon with the message "Waiting" and a OK button, and it just stays there endlessly, untill i get tired of waiting and press the ok button.
Now, I believe this function worked in WM2003SE, when I had a Magician, but that was a long time ago, so I'm not sure of this.
Well, the fact is that it's not working in WM5/6/6.1 in my Trinity. I've even tried with the official WM5 ROM, but no success.
Does someone know how to make this work, or even if it's still possible?
Thanks in advance
FInixNOver
Click to expand...
Click to collapse
It looks USSD service is missing in the ROM, which is taking care for your application request.
ranju said:
It looks USSD service is missing in the ROM, which is taking care for your application request.
Click to expand...
Click to collapse
It must be something else because I have USSD_service.dll and the service is active.
I've already tried changing Radio ROM, but the result is always the same.
FInixNOver said:
It must be something else because I have USSD_service.dll and the service is active.
I've already tried changing Radio ROM, but the result is always the same.
Click to expand...
Click to collapse
In Romania, the ballance is *123# and it is working very well (I am using using your ROM).
FInixNOver said:
Hi everybody.
Here is my problem:
In Portugal, as in other countrys, the Network Operator, provides a code (e.g. *#123# for TMN), so the users can check their current balance without having to call the operator. Instead by dialing the code, the network sends back a message to the phone, with that information.
The procedure is as follows
Open the dialer
Insert the code (in my case *#123#)
Press Send (the green button)
Whenever I tried to do this, a baloon pops from the network status icon with the message "Waiting" and a OK button, and it just stays there endlessly, untill i get tired of waiting and press the ok button.
Now, I believe this function worked in WM2003SE, when I had a Magician, but that was a long time ago, so I'm not sure of this.
Well, the fact is that it's not working in WM5/6/6.1 in my Trinity. I've even tried with the official WM5 ROM, but no success.
Does someone know how to make this work, or even if it's still possible?
Thanks in advance
FInixNOver
Click to expand...
Click to collapse
I tried many rom'se I am currently with the rom elias WWE 2.13, with this rom the code *#123# works perfectly! Someone ask him what he as change in rom to make the codes USSD work, with 2.10 rom also worked well!
FInixNOver said:
Hi everybody.
Here is my problem:
In Portugal, as in other countrys, the Network Operator, provides a code (e.g. *#123# for TMN), so the users can check their current balance without having to call the operator. Instead by dialing the code, the network sends back a message to the phone, with that information.
The procedure is as follows
Open the dialer
Insert the code (in my case *#123#)
Press Send (the green button)
Whenever I tried to do this, a baloon pops from the network status icon with the message "Waiting" and a OK button, and it just stays there endlessly, untill i get tired of waiting and press the ok button.
Now, I believe this function worked in WM2003SE, when I had a Magician, but that was a long time ago, so I'm not sure of this.
Well, the fact is that it's not working in WM5/6/6.1 in my Trinity. I've even tried with the official WM5 ROM, but no success.
Does someone know how to make this work, or even if it's still possible?
Thanks in advance
FInixNOver
Click to expand...
Click to collapse
@ FInixNOver
I'm too facing this problem of not getting the pre-paid balance by dialling *123#, I get the message 'Failed'.
Though I get the accurate pop-up message of my balance after the call has ended, which is from the service provider's side.
Earlier I've used the Elegance ROM & the balance-checking worked perfectly.
Hello
Some days ago I received my HTC Shift and I am very satisfied!
Unfortunately there is one strange Problem:
I am using a MultiSIM by T-Mobile, that means I have one number for multiple devices.
If the HTC Shift would make phone calls and someone calls me, the shift and my MDA Vario III would be ringing.
When I activate the Modem in my Shift it seems the Shift receives phone calls and then denies them! So nobody can call me when I am using my shift, since all calls are directed to my mailbox
Has anyone of you an idea what can I do?
(btw: I unlocked my Shift already to full WM6 )
The shift doesnt support phone calls...even if you have on sim card it wont ring
Use it for its gprs/edge/3g and sms sending n receiving
rdosti said:
The shift doesnt support phone calls...even if you have on sim card it wont ring
Use it for its gprs/edge/3g and sms sending n receiving
Click to expand...
Click to collapse
Hello
thats exactly what I like to use the shift for. I am not interested in making phone calls with it.
But the Shift is blocking calls, which should also arrive on my mobile phone...
I think HTC has made this blocking to avoid connection problems when somebody tries to calls the shift (which is not supported).
Is this right?
Might work?
I don't know for sure about T-Mobile. I am using a similar service (they call it "FlexiCard") from E-Plus. They have a function that allows you to designate one of your SIM cards as the primary card. This is the card that will receive calls (and SMS) first, only if this card is not active (phone turned off) or busy a call or SMS will be routed to the other card.
However, there seems to be a service difference between T-Mobile and E-Plus: I have the SIM card in my Shift still designated as the "primary" card. If the modem is turned on, this is interpreted by E-Plus as "busy", so calls go to my phone (which holds the "secondary" card). If the modem is turned off, the SIM card in my Shift is obviously inactive and not visible to the mobile network. So the only reason for me to switch "primary" vs. "secondary" would be to continue receiving SMS messages on my phone rather than the Shift. Unfortunately, for SMS E-Plus does not bother whether the "primary" card is active / busy or not, SMS always go to that card (understandable when you look at how SMS works on mobile networks).
If you don't find any information about switching primary/secondary card in your documentation that came with the card I suggest contacting the T-Mobile hotline. They should be able to tell you whether this functionality is available with your "MultiSIM" and how to switch "primary" between the cards.
Thank you mw65719 four your tip.
I just phoned with T-Mobile support.
They don't support it like Eplus to switch between SIMCards.
It is just possible to define a primary card for SMS service, not for phone calls. Whenever someone calls me both phones are ringing.
So I will have to buy a new contract with T-Mobile just for data transfer, which is more expensive than the combination of phone/data contract.
I have the same issue with the MultiSIM from t-mobile. Both phones (the other one is a Touch) are ringing, after the first ring a line-busy message is generated.
Seems that the Shift in canceling the incoming call after the first ring.
Does anyone has an idea to solve this problem instead of splitting the MultiSIM into two separate contracts?
Have just opened a suuport case at HTC Europe concering this issue. Seems to be a German (and t-mobile) specific problem.....
speech service ?!
gsiakoe said:
Seems that the Shift in canceling the incoming call after the first ring.
Click to expand...
Click to collapse
find out how the call canceled
a: is it the 3g modem that set the networkstatus to -> data service only
b: or a apllication that will call canceled - reason busy
see here what i mean
http://www.t-mobile.de/downloads/laptop/hyperterminalmulti-sim-anleitung.pdf
I think it's part of the WinMo/SnapVue side.
Vista enables a lan connection with WinMo for internet.
So there could be settings in the registry to enable/disable this busy status.
I try to find somethin, but unfortunately i'm not a pro like others here in the Board.
Where are you folks, on Planet Mars, everyone and all documents I read say that the Shift cannot support phone calls???????
alexn2 said:
Where are you folks, on Planet Mars, everyone and all documents I read say that the Shift cannot support phone calls???????
Click to expand...
Click to collapse
it can be made to recieve them though. we all say Bengalboy's pics. about the phone calls being blocked. that does suck. i guess we have to wait till the phone side is re activated.
Idea how to activate phone pad
Pawel062 said:
it can be made to recieve them though. we all say Bengalboy's pics. about the phone calls being blocked. that does suck. i guess we have to wait till the phone side is re activated.
Click to expand...
Click to collapse
I had some phone calls with T-Mobile Business support and they told me a trick how to activate the phone function, but I dont get this to work.
What I have to do is the following:
1. Download and install a hyper terminal application on Windows mobile (I found http://www.cambridgevx.com (Server seems to be down at the moment))
2. Open a direct connection to the modem
3. Enter the following commands:
3a: AT_odo?
(this should show 1 which means speech is deactivated
3b: AT_odo=0
(speech is beeing activated)
4. Reset Windows Mobile and the phone should be activated
I was told this is known to work on some data modems and should work on the HTC Shift too.
But always I try setp 2 I get an error "cannot open data connection"
Has anyone an idea?
Irgendware said:
I had some phone calls with T-Mobile Business support and they told me a trick how to activate the phone function, but I dont get this to work.
What I have to do is the following:
1. Download and install a hyper terminal application on Windows mobile (I found http://www.cambridgevx.com (Server seems to be down at the moment))
2. Open a direct connection to the modem
3. Enter the following commands:
3a: AT_odo?
(this should show 1 which means speech is deactivated
3b: AT_odo=0
(speech is beeing activated)
4. Reset Windows Mobile and the phone should be activated
I was told this is known to work on some data modems and should work on the HTC Shift too.
But always I try setp 2 I get an error "cannot open data connection"
Has anyone an idea?
Click to expand...
Click to collapse
problem there is no phone pad aka dial pad in production models as far as i know. so even if u can re enable it u wont have any images etc... it'll most likely require a custom rom or if we get lucky a cab.
Pawel062 said:
problem there is no phone pad aka dial pad in production models as far as i know. so even if u can re enable it u wont have any images etc... it'll most likely require a custom rom or if we get lucky a cab.
Click to expand...
Click to collapse
I am not interested in using the phone pad.
I like to solve the busy line problem (read some posts above). When activating the speech on modem side, this would be solve and I could use my Shift with my MultiSIM-Card
Irgendware said:
I had some phone calls with T-Mobile Business support and they told me a trick how to activate the phone function, but I dont get this to work.
What I have to do is the following:
1. Download and install a hyper terminal application on Windows mobile (I found http://www.cambridgevx.com (Server seems to be down at the moment))
2. Open a direct connection to the modem
3. Enter the following commands:
3a: AT_odo?
(this should show 1 which means speech is deactivated
3b: AT_odo=0
(speech is beeing activated)
4. Reset Windows Mobile and the phone should be activated
I was told this is known to work on some data modems and should work on the HTC Shift too.
But always I try setp 2 I get an error "cannot open data connection"
Has anyone an idea?
Click to expand...
Click to collapse
souds interesting ! .. have you try some scenarios ? with 3G enabled, with 3G disabled, with wifi enabled, with wifi disabled ... etc ?
I can't try myself.. but as there are data connection through 3G.. I think that it is possible to find a solution to the step 2 !
Anybody found a solution for this?
Getting my shift soon, and im going for a twin sim solution. would suck if i cant get phone calls on my kaiser cos the shift is on in snap vue mode and rejects the calls.
I am experiencing the same Problem with my Shift.
It is crazy, because my Mobile rings a halt time, then the Shift rejects the call. Afterwards, I have to call back.
The problem should be able to solve, but you have, anyhow, to tell the shifts modem not to reject voice calls. Still, I do not know how to tell the modem
Hello?
Has anyone resolved this issue? I'm a new MultiSIM user, and the idea of not having any internet with my shift is ****ing me off (that would make it as useful as a brick ).
Any resolution is appreciated.
Cheers.
HI @ all, i don´t know, if you fixed that problem.
I´m a multi SIm user too. With the original Radio Version (shipped with german SHIFT) the same problem. After that, i update the radio Version to the Phone edition radio Version:
see:
http://forum.xda-developers.com/showthread.php?t=486234
(but here always my WinCE Side was really slow??) so I Downgrade back the phone edition
1.27.35.28 and ce OS version 5.2.1620 (I00 ROm I think)
And now, Phone is working, and never the Multisim usage hangs up.
I don´t know why, i play every 1 month with Shift and upgrade, downgrade something, then the most time shift is not in use, so i don´t make a history what happend...
:-(
But with the new radio Version it will work.
maybe this rom work too:
Cmonex posted another radio for backup. This radio is for original rom (ie all other roms from the forum). Look for the link on page 5, or here
http://rapidshare.com/files/20211808...ift1582123.zip <- this is not for the phone or for this rom
Mirror: http://www.mediafire.com/?sharekey=7...e6ba49b5870170
Irgendware said:
Hello
Some days ago I received my HTC Shift and I am very satisfied!
Unfortunately there is one strange Problem:
I am using a MultiSIM by T-Mobile, that means I have one number for multiple devices.
If the HTC Shift would make phone calls and someone calls me, the shift and my MDA Vario III would be ringing.
When I activate the Modem in my Shift it seems the Shift receives phone calls and then denies them! So nobody can call me when I am using my shift, since all calls are directed to my mailbox
Has anyone of you an idea what can I do?
(btw: I unlocked my Shift already to full WM6 )
Click to expand...
Click to collapse
it happens with all multiple sims when you have all the devices activated!!!...
when you have multiple sims and you have all the devices open...
which device should accept the call ??
it does not work as douplex land line... not all of your mobile devices should ring at the same time ... obviously the one that was opened first and got the signal from your provider should get the line...
the twin sim solution works fine with me ... plus unlimited internet access from phone and the shift...
BUT one device open at a time ...
Hello Everybody,
I recently purchased an Htc Evo Shift which was already flashed to boost. When I added money to the phone for use I realized that the phone had an odd number being that every one i was calling would not pick up on the first few tries thinking that I was a telemarketer. I called boost to change the number to a local area code but after they made the change we encountered a problem. I dont know what the exact code was but it consisted of two pounds , four numbers starting with 3 , and another pound. They repeatedly asked me to press ##3---# to bring up a menu to update the phone so I could use the new phone number. I'm assuming the code was for the incognito because after the process didnt work they asked if i was using the incognito. I simply told them yes and that I would call back to finish the process when i had time. The phone now does not have service or internet until i can get it to recognize the new phone info.
I dont know what to do, if someone could help it would be greatly appreciated
Thanks
##epst#
Sent from my PG06100 using XDA Premium App
Cheese_ said:
Hello Everybody,
I recently purchased an Htc Evo Shift which was already flashed to boost. When I added money to the phone for use I realized that the phone had an odd number being that every one i was calling would not pick up on the first few tries thinking that I was a telemarketer. I called boost to change the number to a local area code but after they made the change we encountered a problem. I dont know what the exact code was but it consisted of two pounds , four numbers starting with 3 , and another pound. They repeatedly asked me to press ##3---# to bring up a menu to update the phone so I could use the new phone number. I'm assuming the code was for the incognito because after the process didnt work they asked if i was using the incognito. I simply told them yes and that I would call back to finish the process when i had time. The phone now does not have service or internet until i can get it to recognize the new phone info.
I dont know what to do, if someone could help it would be greatly appreciated
Thanks
Click to expand...
Click to collapse
What she was trying to get you to bring up was the ESPT ( ##3282# ) . That will take you to a Menu that says view or edit. If you press view it will let you view the information. But if you press EDIT, then another Menu comes up that says enter code. This is where your going to need your MSL ( Master Subsidy Lock ) . That will let you enter the Menu, and actually make changes. You can go on the Android Market and download MSL Reader, or just Google it. Then connect your phone to the PC via USB, and load it that way. You can also check THIS THREAD for info.
I've got the Au Carrier version, Model Number "SCV33".
The problem was that the phone came with locked network, but i unlocked it through About>Status>Sim Lock Status by registering my SIM.
The 2nd problem which i cant solve is whenever i try to call someone it keeps giving the options "Set Dialing Destination: To Japan or To Oversees"
Pressing to Japan causes it add the Japan code, and when i press oversees it tells me to enter the code for the country and to do that i have to put the code in front of every number manually or edit each number with the code, that also sometimes doesn't work cause Google sometimes wont remove the original number without the code and will keep calling that one. And there is no "more settings" in call settings, thus no assisted dialing option. I really don't want to root or flash anything.
Also the issue isn't about calling people i can deal with that, problem is i cant put codes e.g *124# *3# etc which are for getting balance info and packages.
Cheers if anyone can help me.