Huawei P8Lite ALE-L21 C432B584 TWRP Help - P8lite Q&A, Help & Troubleshooting

Hi all.
Problem with my Huawei Ale-l21
Ive unlocked bootloader atleast it shows Phone Unlocked.
But everythime i want intall costum twrp recovery it shows in CMD
target reported max download size of 471859200 bytes
sending 'recovery' (12644 KB)...
OKAY [ 1.368s]
writing 'recovery'...
FAILED (remote: image verification error)
finished. total time: 1.371s
Tryed lots of twrp images. Noting works. Is that possible that B584 version does not support it or whats the problem ?

Related

sparse flash write failure

QHC0216226001093 fastboot
target reported max download size of 471859200 bytes
sending 'boot' (28738 KB)...
OKAY [ 0.617s]
writing 'boot'...
OKAY [ 0.571s]
finished. total time: 1.189s
target reported max download size of 471859200 bytes
sending 'cust' (16381 KB)...
OKAY [ 0.350s]
writing 'cust'...
FAILED (remote: sparse flash write failure)
finished. total time: 0.379s
target reported max download size of 471859200 bytes
sending 'recovery' (43578 KB)...
OKAY [ 0.934s]
writing 'recovery'...
OKAY [ 0.865s]
finished. total time: 1.803s
target reported max download size of 471859200 bytes
sending sparse 'system' (452422 KB)...
OKAY [ 10.092s]
writing 'system'...
FAILED (remote: sparse flash write failure)
finished. total time: 10.143s
i'm totally stuck.
my phone is c432
I was on twisted rom b386, update to noguat b521 succesfully completed but after reboot i got bootloop. Tried everything and nothing works. Phone won't boot any version anymore. also i cannot install twrp 4.1 again. I can install just stock recovery. When i flash twrp i get stucked on "your device is now booting". Tried to flash through dload doesn't work either.
any suggestion is apreciated.
thx
Flash stock nougat revovery. Download C185B320. Extract update.app into the dload folder of your sdcard. And do the dload update. Try it and let us know.
looks like huawei removed from his website.
is there some mirror?
found
https://drive.google.com/file/d/0BxOdJKPsTEZZZk4ybFdHUXNNd1E/view
software installation failed! Incompatibility with current version. Please download the correct update package.
tried to extract files to debrick with italian knife and i got a partition error. is there a way to redo partitions?
Try rollback package.http://forum.xda-developers.com/mat...-to-downgrade-mate-8-emui-5-to-t3515202/page1
ok, i was able to rollback just with the asian one. now i'm trying to download stock asian firmware and i'll try to flash. i hope this works because i wasted 1 day and half to get it fixed..
it's weird that i was able to rollback just with c900
no luck. it doesn't boot. stuck on huawei logo.
ok, wiping system and cache did the trick.
thanks everyone
Icchan said:
ok, wiping system and cache did the trick.
thanks everyone
Click to expand...
Click to collapse
did you wipe in twrp? and what did you do next?
wisepy112 said:
did you wipe in twrp? and what did you do next?
Click to expand...
Click to collapse
Can you reply please i have the same problem.
please aswered i have the excacy same problem
feplau said:
please aswered i have the excacy same problem
Click to expand...
Click to collapse
fastboot erase boot
fastboot erase system
fastboot erase userdata
fastboot erase cache
fastboot erase webtop
fastboot erase preinstall

Can't flash TWRP with unlocked bootloader

Hiii,
I've read many threads but didn't find my answer, I have an unlocked bootloader but can't flash TWRP recovery.
Tried many different versions but all tries give me an "remote: image verification error"
Device is fastboot mode:
C:\Temp>fastboot devices -l
4<serial hidden>7 fastboot
Bootloader unlocked with official unlock code:
C:\Temp>fastboot oem get-bootinfo
...
(bootloader) unlocked
OKAY [ 0.006s]
finished. total time: 0.007s
Flash TWRP (failed) and flash STOCK (success):
C:\TEMP>fastboot flash recovery recovery_twrp.img
target reported max download size of 471859200 bytes
sending 'recovery' (28928 KB)...
OKAY [ 0.617s]
writing 'recovery'...
FAILED (remote: image verification error)
finished. total time: 0.634s
C:\TEMP>fastboot flash recovery recovery_stock.img
target reported max download size of 471859200 bytes
sending 'recovery' (32960 KB)...
OKAY [ 0.701s]
writing 'recovery'...
OKAY [ 1.102s]
finished. total time: 1.805s
Any ideas... what can I do/ what should try?
Thx!
Strange is when I :
C:\Temp>fastboot oem get-lockstate
...
(bootloader) locked
OKAY [ 0.004s]
finished. total time: 0.005s
it say's it's locked, but when I try to unlock with correct code, it gives a message wrong password, so it's unlocked :|
roelprincen said:
Hiii,
I've read many threads but didn't find my answer, I have an unlocked bootloader but can't flash TWRP recovery.
Tried many different versions but all tries give me an "remote: image verification error"
Device is fastboot mode:
C:\Temp>fastboot devices -l
4<serial hidden>7 fastboot
Bootloader unlocked with official unlock code:
C:\Temp>fastboot oem get-bootinfo
...
(bootloader) unlocked
OKAY [ 0.006s]
finished. total time: 0.007s
Flash TWRP (failed) and flash STOCK (success):
C:\TEMP>fastboot flash recovery recovery_twrp.img
target reported max download size of 471859200 bytes
sending 'recovery' (28928 KB)...
OKAY [ 0.617s]
writing 'recovery'...
FAILED (remote: image verification error)
finished. total time: 0.634s
C:\TEMP>fastboot flash recovery recovery_stock.img
target reported max download size of 471859200 bytes
sending 'recovery' (32960 KB)...
OKAY [ 0.701s]
writing 'recovery'...
OKAY [ 1.102s]
finished. total time: 1.805s
Any ideas... what can I do/ what should try?
Thx!
Strange is when I :
C:\Temp>fastboot oem get-lockstate
...
(bootloader) locked
OKAY [ 0.004s]
finished. total time: 0.005s
it say's it's locked, but when I try to unlock with correct code, it gives a message wrong password, so it's unlocked :|
Click to expand...
Click to collapse
same with me ?
Try to relock and then unlock. I've had this problem too after downgrade to mm by official Huawei rollback package. Then phone and other tools shows than phone is unlocked and it was unable to flash recovery.
if it says wrong password it means you got the wrong password. it will say it's already unlocked if you try unlocking it while it's unlocked
My phone was unlocked with Potato v2.0.1, with working TWRP, rooted etc...
I solved this problem that arose after unsuccesfully install custom Rom, restore backup of stock rom, install update through dload and many many other attempts at improvement of my smartphone :-( No more time again!!!
Probably installing update through Dload will relock bootloader, but in the fastboot mode it says bootloader still unlocked.
Before I did all this, I had an original stock rom.
1: Relock bootloader with PotatoNV v2.0.1 (You need to open case and connect tespoint by wire - look on Youtube, i´ve find it there, also you need "Huawei testpoint drivers")
2: Factory reset
3: Install any update stock rom with Dload (Vol up + Vol down + power)
4: Factory reset
5: Developer options-turn on OEM unlock and USB debbuging
6:Unlock bootloader with PotatoNV v2.0.1 - keep password generated by Potato
7:Multitool 8 for Huawei - in the bootloader state unlock bootloader again - use password generated by Potato
8:Multitool 8 for huawei - install TWRP - it says "Succesfully installed" - TWRP works, root is possible. Yeah!!!
May be this is not right way to solve this, but for me it workś..

P9 lite L31 Europe Hard Bricked

Hi,
I have a p9 lite VNS-L31 Europe Model.
I have Phone Unlocked and FRP Unlocked.
The problem is that i can no loger boot the device.I tried using the toolkit found here on the server,but it doesn't recognize it anymore.
I tried using cmd fastboot devices. It shows there but i cannot give any command.
"
C:\Users\Nick>fastboot flash system C:\Users\Nick\Desktop\p9\system.img
< waiting for device >
target reported max download size of 471859200 bytes
sending sparse 'system' (451240 KB)...
OKAY [ 15.605s]
writing 'system'...
FAILED (remote: Command not allowed)
finished. total time: 15.619s
"
C:\Users\Nick>fastboot oem get-bootinfo
...
(bootloader) unlocked
OKAY [ 0.000s]
finished. total time: 0.000s
"
I have downloaded a full version.
How can i fix my device ?
Delete...
NickBond said:
Hi,
I have a p9 lite VNS-L31 Europe Model.
I have Phone Unlocked and FRP Unlocked.
The problem is that i can no loger boot the device.I tried using the toolkit found here on the server,but it doesn't recognize it anymore.
I tried using cmd fastboot devices. It shows there but i cannot give any command.
"
C:\Users\Nick>fastboot flash system C:\Users\Nick\Desktop\p9\system.img
< waiting for device >
target reported max download size of 471859200 bytes
sending sparse 'system' (451240 KB)...
OKAY [ 15.605s]
writing 'system'...
FAILED (remote: Command not allowed)
finished. total time: 15.619s
"
C:\Users\Nick>fastboot oem get-bootinfo
...
(bootloader) unlocked
OKAY [ 0.000s]
finished. total time: 0.000s
"
I have downloaded a full version.
How can i fix my device ?
Click to expand...
Click to collapse
Unlock your smartphone again.
JustChris20 said:
Unlock your smartphone again.
Click to expand...
Click to collapse
How ?
Fixed it
Hei
I managed to fixed it by dload with nrd90m test-keys with an SD Card.Then power up with the power and volum + and - .
It works now.

[ADB & FASTBOOT] Problem with flashing TWRP FAILED (remote: Command not allowed)

Hi Guys! After brick, my p9l have red "menu" at start and text "Failed verificatnion" or smth like this.
I can't flash TWRP because of FAILED (remote: Command not allowed).
Bootloader & FRP unlocked.
Adb isn't working at bootloader, only fastboot is working.
I want to rollback to 6.0. I have dload with file on my sdcard but i can't flash oeminfo without twrp.
How to fix it?
Code:
E:\tele\SRKToolHuawei-STABLE-V1.3-20160619>FASTBOOT flash recovery EliteTWRP.img
target reported max download size of 471859200 bytes
sending 'recovery' (24452 KB)...
OKAY [ 0.618s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.632s
I want to say sorry for my english :/
Try to flash TWRP with P9 lite toolkit

i need help (my phone smells softbrick or hardbrick and have bootloop) I have a p8 lite 2015 (ALE-L23)

This phone have probably softbrick or hardbrick and bootloop and intro to recovery (no erecovery) gets a rescue mode screen
I have tried with the "potatonv" tool and trying to flash a stock rom and a custom recovery but none work and I have the bootloader unlocked but I get these following results:
>fastboot flash RECOVERY RECOVERY.img
target reported max download size of 471859200 bytes
sending 'RECOVERY' (36118 KB)...
OKAY [ 0.986s]
writing 'RECOVERY'...
FAILED (remote: Command not allowed)
finished. total time: 1.012s
>fastboot flash recovery RECOVERY.img
target reported max download size of 471859200 bytes
sending 'recovery' (36118 KB)...
OKAY [ 1.000s]
writing 'recovery'...
FAILED (remote: flash write prim vrl failure)
finished. total time: 1.468s

Categories

Resources