In this thread, You can share the Mega-Links of new firmware's (OFFICIAL STOCK) for the Galaxy S8 (so: NO CUSTOM ROM's and/or ROOT-talk)...
How to flash firmware to your phone:
WARNING WARNING WARNING -> Before flashing, ACTIVATE PIN in "Secure startup" (You'll be asked for it AFTER flashing!)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WARNING WARNING WARNING -> Before flashing, ACTIVATE PIN in "Secure startup" (You'll be asked for it AFTER flashing!)
1. Extract (un-rar) the firmware file (i.e. to folder c:\Odin) ***
2. Download Odin v3.13.1
3. Extract Odin ZIP file (i.e. to folder c:\Odin)
4. Open Odin v3.13.1
5. Reboot Phone in Download Mode (press and hold Bixby + Power + Volume Down buttons)
6. Connect phone and wait until you get a blue sign in Odin
7. Add the firmware files to their designated slots
8. Make sure re-partition is NOT ticked
9. Click the start button, sit back and wait few minutes
Below a video with the "How to flash"; thanks @ISF for making this tutorial:
https://www.youtube.com/watch?v=2y0ZZxcNVnE
*** You can always find the LATEST firmware in msg #2
Latest Firmware Multi-CSC OXM
This ROM is the latest ROM for Multi-CSC OXM released 21 feb 18, and can be used for ALL CSC's mentioned in Multi-CSC OXM!
This is official Samsung ROM, so KNOX won't be triggered!
Change CSC for i.e. use Samsung Pay
Your data will stay intact, but it's possible you get "com.android.***** has stopped" -> Then a Factory Reset is needed (in Recovery)!
What's new:
* Android 8.0.0
* February security patches (Samsung Android Security Updates)
Samsung Experience 9.0 upgrade with Android Oreo
Samsung Experience 9.0 brings you Android Oreo, with exciting new features from Samsung and Google based on feedback from users like you.
We recommend that you back up your important data to keep it safe during the upgrade.
Some apps, including Samsung Pay, Samsung Internet, Samsung Notes, and Email, should be updated individually before you can update your OS.
Here’s what’s new.
Biometrics
To improve your security, features that use biometrics (face, fingerprints, and irises) are only available when you use a secure screen lock type (pattern, PIN, or password). When you switch to a non-secure screen lock type (Swipe or None), biometric authentication is suspended for unlocking and for verification in apps like Samsung Pay and Samsung Pass. If you're using biometrics now without a secure screen lock type, you'll be able to continue after the upgrade, but changing to a secure screen lock type is recommended.
Quick Panel
- Manage notifications for each app with notification categories (supported apps only).
- Icons will be shown at the bottom of the notification panel for notifications that aren't currently visible.
Home Screen
- Touch and hold an app to display shortcuts to common or recommended tasks within the app (supported apps only).
- Notification badges on app icons are linked with the notification panel. Clear a notification in one location, and it will also be cleared in the other location.
Samsung Keyboard
- The toolbar gives quick access to useful functions.
- The GIF keyboard lets you send GIFs.
- More high-contrast keyboards are available.
System Performance
- Background services are limited to improve performance and battery life.
- Currently running apps will always be shown in the notification panel.
Edge screen
- Improved font size, color, and other settings for better Edge panel visibility.
- Touch and hold the Edge panel handle to change its position.
- Added 3 more Edge lighting effects and color customization for apps.
Lock Screen and Always On Display
- New clock styles for the Lock screen and Always On Display.
- Adjust the transparency of notifications to get the look you want.
Smart View
- Let your phone's screen go dark when mirroring to another screen.
Samsung account
- Control your account settings and profile information for multiple apps.
- Tap your profile picture on the main Settings page to access your profile information and account settings.
Samsung Cloud
- View and manage photos and notes stored only in Samsung Cloud.
- Store any type of file in Samsung Cloud Drive.
- Select specific items to delete or restore from your backups.
- See how big each backup is and how many items it contains.
Samsung Dual Messenger
- Install a second copy of a messaging app so you can use two accounts at the same time. For apps that verify accounts using phone numbers, you'll need a different phone number for each account.
- Touch and hold a messaging app on the Home or Apps screen to install the second account or go to Settings - Advanced features - Dual Messenger.
Find My Mobile
- Back up Secure Folder to Samsung Cloud remotely when your phone is lost.
- Lock Samsung Pass using Find My Mobile.
Samsung DeX
- See more apps at once by changing the app list view to full-screen.
- Use Game launcher in Samsung DeX for a full-screen gaming experience.
- Added support for 2 additional Samsung covers (LED View Cover, Clear View Standing Cover).
Other improvements
- Bluetooth now supports high-quality audio codecs, including AAC and Sony LDAC.
- Video player includes auto repeat and 2x speed option.
- Voice Recorder provides smart tips to conveniently block calls while recording.
- Email lets you flag Microsoft Exchange ActiveSync emails.
- Samsung Health's new sticky notification lets you see your step count at a glance.
- Clock now includes a Landscape mode and timer sound options.
- The digital clock widget goes directly to the Clock app when you tap it.
- Samsung Pass added the ability to manage usernames and passwords in third-party apps.
Model SM-G955F
Model name Galaxy S8 plus
Country Multi-CSC OXM
Version Android 8.0.0
Changelist 12993656
Build date Mon, 19 Feb 2018 14:23:54 +0000
Security Patch Level 2018-02-01
Multi-CSC OXM
PDA G955FXXU1CRB7
CSC G955FOXM1CRAP
Details for download with SamFirm:
UN-ZIP the archive and place the files in the designated slots in Odin 3.13.1
HOME_CSC_OXM -> data will stay intact
CSC_OXM -> device will be resetted (NOT included in archive for "smaller archive" due to "download limitations" MegaNZ)
This package contains the HOME_CSC of OXM Multi-CSC, which include the following CSC's: ACR AFG AFR ARO ATO AUT BGL BNG BRI BTC BTU CAC CAM CEL CHO COO DBT DKR ECT EGY EON ETL EUR GLB ILO INS ITV KSA LAO LUX LYS MID MM1 MWD MYM NEE NPL ORX PAK PCL PHE PHN PTR ROM SEB SEE SEK SER SIN SKZ SLK SMA STH THL THR TMC TPA TPH TTT TUN TUR WTL XEF XEH XEO XEU XFA XFE XME XSG XSP XTC XXV ZTO
New Multi-CSC -> OXM
The European model of the S8/S8+ (SM-G950F + SM-G955F) will get a Multi-CSC -> OXM
This Multi-CSC was already used in the Note 7, and will now be continued on the S8/S8+
OXM Multi-CSC, which include the following CSC's: ACR AFG AFR ARO ATO AUT BGL BNG BRI BTC BTU CAC CAM CEL CHO COO DBT DKR ECT EGY EON ETL EUR GLB ILO INS ITV KSA LAO LUX LYS MID MM1 MWD MYM NEE NPL ORX PAK PCL PHE PHN PTR ROM SEB SEE SEK SER SIN SKZ SLK SMA STH THL THR TMC TPA TPH TTT TUN TUR WTL XEF XEH XEO XEU XFA XFE XME XSG XSP XTC XXV ZTO
nice one Henk glad to see u here
Here you go!
Stock Firmware ..
https://www.androidfilehost.com/?fid=457095661767151824
henklbr said:
In this thread, You can share the Mega-Links of new firmware's (OFFICIAL STOCK) for the Galaxy S8+ (so: NO CUSTOM ROM's and/or ROOT-talk)...
How to flash firmware to your phone:
Click to expand...
Click to collapse
Wouldn't this thread be better in the devs forum?
henklbr said:
WARNING WARNING WARNING -> Before flashing, ACTIVATE PIN in "Secure startup" (You'll be asked for it AFTER flashing!)
Click to expand...
Click to collapse
Just out of curiosity, what's the reason behind this?
sanjsrik said:
Wouldn't this thread be better in the devs forum?
Click to expand...
Click to collapse
Nope; in the S7/S7Edge forum it's in the same section as here...
Outbreak444 said:
Just out of curiosity, what's the reason behind this?
Click to expand...
Click to collapse
There's a possibility, that after flashing with Odin (and using home_csc), you'll be asked to enter a PW
That's the PW you fill in in "Secure Startup"
This happened me a few times, resulting I'd to reset my device...
henklbr said:
Nope; in the S7/S7Edge forum it's in the same section as here...
Click to expand...
Click to collapse
Just because it's in the wrong section in one forum, doesn't make it automatically okay to put it in the wrong section in another forum.
This is obviously ROM related and NOT about guides or news or discussion.
My only suggestion of moving it to the appropriate forum is so it won't get lost in the all the questions and unrelated topics to do with ROMs.
shrug, up to you, I have no need for this so enjoy getting lost in the morass.
G955FXXU1AQC9 (Netherlands - PHN)
WARNING WARNING WARNING -> Before flashing, ACTIVATE PIN in "Secure startup" (You'll be asked for it AFTER flashing!)
WARNING WARNING WARNING -> Before flashing, ACTIVATE PIN in "Secure startup" (You'll be asked for it AFTER flashing!)
This ROM is based on the the latest ROM for Netherlands (PHN) released ** mar 17, and made it compatible for the Netherlands (PHN).
This is official Samsung ROM, so KNOX won't be triggered!
Note: after install of this ROM, you will receive OTA-updates!
Your data will stay intact, but it's possible you get "com.android.***** has stopped" -> Then a Factory Reset is needed (in Recovery)!
What's new:
* Android 7.0
* March security patches (Samsung Android Security Updates)
* Stability Improvements
Model SM-G955F
Model name Galaxy S8 plus
Country Netherlands
Version Android 7.0
Changelist 10895874
Build date Sun, 12 Mar 2017 00:33:14 +0000
Security Patch Level 2017-03-01
Product code PHN
PDA G955FXXU1AQC9
CSC G955FOXM1AQC9
Download for install with Odin 3.12.3: NOT YET AVAILABLE
UN-RAR the archive and place the files in the designated slots in Odin 3.12.3
This package contains the HOME_CSC of the Netherlands (PHN); if you want the HOME_CSC of your own country/region, download the latest firmware of your country/region and extract the HOME_CSC which you can use with the BL AP & CP of the main package!
G955FXXU1AQDD (Netherlands - PHN)
WARNING WARNING WARNING -> Before flashing, ACTIVATE PIN in "Secure startup" (You'll be asked for it AFTER flashing!)
WARNING WARNING WARNING -> Before flashing, ACTIVATE PIN in "Secure startup" (You'll be asked for it AFTER flashing!)
This ROM is the latest ROM for Netherlands (PHN) released 21 apr 17
This is official Samsung ROM, so KNOX won't be triggered!
Note: after install of this ROM, you will receive OTA-updates!
Your data will stay intact, but it's possible you get "com.android.***** has stopped" -> Then a Factory Reset is needed (in Recovery)!
What's new:
* Android 7.0
* April security patches (Samsung Android Security Updates)
* Stability Improvements
* Camera Firmware-update
Model SM-G955F
Model name Galaxy S8 plus
Country Netherlands
Version Android 7.0
Changelist 11168760
Build date Tue, 11 Apr 2017 13:35:33 +0000
Security Patch Level 2017-04-01
Product code PHN
PDA G955FXXU1AQDD
CSC G955FOXM1AQDD
Download for install with Odin 3.12.3: MegaNZ
UN-ZIP the archive and place the files in the designated slots in Odin 3.12.3
This package contains the HOME_CSC of OXM Multi-CSC, which include the following CSC's: ACR AFG AFR ARO ATO AUT BGL BNG BRI CAC CAM CHO COO DBT DKR ECT EGY EON ETL EUR ILO INS ITV KSA LAO LUX MID MWD MYM NEE NPL ORX PAK PHE PHN ROM SEB SEE SEK SER SKZ SLK THL THR TPA TPH TTT TUN TUR XEF XEH XEO XEU XFE XME XSG XSP XTC XXV ZTO
The Default CSC of the Multi-CSC OXM is XEU
Lads.. XEU or BTU for UK unbranded phone? S7e was btu and s8 plus csme with xeu.. is that right?
misiokicio said:
Lads.. XEU or BTU for UK unbranded phone? S7e was btu and s8 plus csme with xeu.. is that right?
Click to expand...
Click to collapse
I havent had any updates yet, still on AQC9 and checking for OTA update tells me there is nothing newer, mine is using XEU (sim free UK S8+).
While im here, are the S8+ firmwares compatible with the S8 ones? They are identical since the hardware is exactly the same right?
ewokuk said:
I havent had any updates yet, still on AQC9 and checking for OTA update tells me there is nothing newer, mine is using XEU (sim free UK S8+).
While im here, are the S8+ firmwares compatible with the S8 ones? They are identical since the hardware is exactly the same right?
Click to expand...
Click to collapse
Well.. went and flashed btu in odin... but bcs the new multi csc... is still xeu at least is as everyone else now AQDD
Will you make a thread for the S8 (G950F), too?
Would be really nice!
Great to see you here @henklbr
im following everything here but the flashing didn't change my CSC at all i tried both files provided but with no luck
it flashes normally but the blue screen stops at 32% and then erasing and reboot normally
If all ROMs from europe are having the same multi-csc, are OTA updates then also europe wide released ? Or do we need to flash with odin like with the S7edge ?
Verstuurd vanaf mijn SM-G935F met Tapatalk
Related
Samsung Galaxy Note 10.1 Stock Firmware Collection
N8000XWALG9 Download (Thanks To SamMobile)
Base Firmware: N8000XWALG9 (4.0.4)
Region Europe
Country: Luxembourg
Carrier: Unbranded
Build Date: 26 July 2012
Modem: XXLGA
CSC: LUXALG3
Change List: 963637
Instructions For Flashing Firmware:
Extract the firmware
Open the included Odin
Turn off your device
Put your device into Download MODE (Home + Volume Down + Power)
Click PDA and select *.tar.md5
Then finally click START!
Instructions For Changing CSC:
Download Samsung Galaxy S / S2 CSC app from the Play Store
Open Samsung Galaxy S / S2 CSC app
Tap "Change CSC" button
Select the CSC for you Country
Tap "Install" button (Keep in mind changing CSC wipes your device)
Follow Me On Twitter:
Previous Firmwares
N8000XWALG7 Download (Thanks To SamMobile)
Base Firmware: N8000XWALG7 (4.0.4)
Region Asia
Country: United Arab Emirates
Carrier: Unbranded
Build Date: 20 July 2012
Modem: XXLGA
CSC: OJVALG4
Change List: 919244
N8000XXALGA Download (Thanks To SamMobile)
Base Firmware: N8000XXALGA (4.0.4)
Region Europe
Country: Poland
Carrier: Unbranded
Build Date: 18 July 2012
Modem: XXLGA
CSC: OXXALG5
Change List: 861995
==RESERVED==
in Germany i also have the xxalga Firmware
Gesendet von meinem GT-N8000 mit Tapatalk 2
Notw 10.1 WiFi
Does anyone have the official software for the Note 10.1?
I flashed the build on my WiFi N8010 from SamMobile but it's a retail demo version and is missing the lock screen, security settings etc.
Cheers
I tried the Luxembourg ROM and its got a ton of bloatware. No problem if you're rooted and can do some clean-up but a waste of space if you're not. Also, the EU Media Hub won't work from the U.S. and can't be spoofed. The TTT ROM is the cleanest.
Hello forum!
limestar: you can remove the retail/demo app (the video that starts right after your screen goes dim) by rooting the device, setting RW permissions to /system/app and removing the first app in the /system/app list (if I remember it correctly it's first one, anyway it's easily distinguished). No need to flash it. Actually it wasn't removed for some reason after I flashed the firmware found on sammobile (I am very new to flashing). Anyway if you do this please let me know what was the package name as I have to make instructions how to remove the thing and I cannot remember the package name and can't find the name on my gadget.
Closed as per OP's request.
HOW TO CHANGE CSC CODE ON SAMSUNG GALAXY GRAND DUOS I9082/I9082L
DISCLAIMER:
*What you done to your phone is at your OWN RISK, you choose to do this modifications to your phone and don't blame me if anything goes wrong.
Hi guys, I created this topic in order to help those who are unable to change their CSC code to back to their stock firmware region's CSC code in order to reclaim their warranty.
*I tried on I9082, it should be work on I9082L and other Samsung devices with Android 4.x + as well.
**Have you noticed even you have reset-ed your BIN counter and flash back official firmware, you are still 1-step closer to reclaim your warranty? Which is the CSC code. Even you are on official Firmware, Samsung will still know you have already flashed custom firmware before and they can refuse to help you repair or whatever to fix your phone if you have any hardware problems.
This is for those who are running on Custom ROM before such as Cyanogenmod (like me ) or other different region's firmware, which will eventually mess up your phone's original CSC code when you are trying to restore to official/stock firmware.
If you are alreading using the correct CSC code on your phone and country, or you have successfully changed the CSC code using CSC changer. You can skip this.
CSC code a.k.a Customer Sales Code.
CSC; - Customer Sales Code;
This value can vary depending on who sold you the handset or if it is branded, if Orange sold you the handset, it will most likely have ORA as a CSC code. If Car Phone warehouse sold it to you, it would be CPW or XEU, this is in relation with your product code and changing the CSC code can change the product code held in nv_data.bin. The CSC firmware file contains a list of definitions for determining which network you are connected to.
The CSC file/value also goes in conjunction with how Kies will read the phone firmware-CSC value and judge if you require an update to your existing firmware. As before, we would use a Kies registry patcher, edit the registry ourselves to edit the firmware-CSC values and update the phone as we required. The new method requires an app on the phone called "Spoof FW", this edits values on the phone, so when kies connects, it believes its another phone and updates for the values you have entered. Spoof FW can be acquire from the Android Market - CLICK HERE (https://market.android.com/details?id=com.johnan.spooffw&hl=en)
Multi-CSC firmware files contain more than one CSC to choose from, so, you can switch from CPW to XEU/XEO/XEE.
To access the CSC selection menu, Eclair: *#272*HHMM#, on FroYo, *#272*IMEI#.
Click to expand...
Click to collapse
Since the *#272*-IMEI-# code doesn't work on ICS or JB anymore, this gets our job a little bit harder. :crying:
I will guide you using my method. Which it works for me. :fingers-crossed:
Steps:
1a. If you are on CM ROM or Baliboxer's ROM etc, download stock firmware from sammobile.com and directly flash stock firmware which contains the correct regional code for your device through ODIN. (Normally a stock ROM from sammobile will contains several regions CSC. Make sure you have downloaded the firmware which contains your region's CSC.)
After flash, just root the stock ROM. You knew the drill.
or
1b. You are on stock ROM but is on other's region firmware and is rooted (based on Samsung official firmware). Same, just download your stock latest update firmware from sammobile.com first. Which contains your region's CSC.
2. Ok, now both are on a stock ROM but rooted, check your CSC using the CSC Changer app. You will see like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
*Warning, installing CSC code will wipe the data of your phone.
**Try Install the CSC for your region, If you are not able to change back to your region's CSC, continue the procedure below. Else if you have successfully changed it, (Check again by installing the app again) reset your BIN counter using Triangle Away app, reboot and put your phone in Download mode (Do not enter CWM Recovery again as it will increase the BIN counter). Flash back the same Firmware you've downloaded, and you are done. Just like as you firstly bought the phone. (Check it by entering stock recovery, you will see a text like: "Applied Multi-CSC: XME"
3. If not working, then install ES File Explorer from Playstore or link below (recommended) or other file browser with Root access ability. Open the side menu and select Root Explorer.
4. Grant SU permission for ES File Explorer then select Root Explorer, select Mount R/W, again select both Path RW permission.
5. After that browse and open using ES Note Editor (recommended) mps_code.dat file located in /efs/imei/.
Change to the code you want and Save it.
6. Again browse and open using ES Note Editor (recommended) sales_code.dat file located in /system/csc/.
Change to the code you want and Save it.
7. Alright all done, reboot your phone first. Then reset the BIN counter using Triangle Away. (Again, friendly reminder: Do not enter CWM Recovery again as it will increase the BIN counter) Reboot and put your phone in Download mode. Flash the stock ROM you've downloaded though ODIN.
8. After flash, remember you must go into stock recovery immediately the first recovery screen appears. (Which got a blue line running with the Android doll, after that your phone will reboot. Press the recovery buttons as soon the doll disappears)
9. Check if your phone had applied the correct CSC for your region. At line Applied the CSC-code: ATO or XXX etc.
*Pics taken from Google Image.
10. That's it, do a wipe of data/cache, and reboot your phone. You are on Fully Official Stock Samsung ROM.
Sorry for my weak english.
List of CSC code:
ATO Austria
AUT Switzerland
COS Greece
CPW UK & IRE
CYO Greece
EIR Ireland
EUR Greece
FOP SPAIN
ITV ITALY
MOO AUSTRIA
PAN Hungary
PHE SPAIN
TPH portugal
XEF France
XEH Hungary
XEO Poland
XEU UK & IRE
XEZ Czech Republic
XSK Slovakia
ALB Albania
CNX Romania
COA Romania
ERO Bosnia
GBL Bulgaria
MOT Slovenia
MSR Serbia
PMN Montenegro
SIM Slovenia
TMT Montenegro
TOP Serbia
TRA Croatia
TWO Croatia
ALO Ukraine
FTD Ukraine
MBC Mongolia
MSG Ukraine
SEK Ukraine
SER Russia
SKZ Kazakhstan
VHC Ukraine
ETR Bangladesh
INS India
INU India
NPL Nepal
SLK Sri Lanka
TML Bangladesh
GLB PHILIPPINES
MM1 SINGAPORE
SIN SINGAPORE
SMA PHILIPPINES
STH SINGAPORE
THL THAILAND
XEV VIETNAM
XME MALAYSIA
XSE INDONESIA
XSP SINGAPORE
XTC PHILIPPINES
XTE PHILIPPINES
ABS TUNISIA
AFG Afghanistan
BTC Libya
EGY Egypt
JED KSA
KSA KSA
MAT MOROCCO
MED MOROCCO
MID IRAQ
MMC Libya
MRT Mauritania
MWD MOROCCO
PAK PAKISTAN
THR IRAN
TMC Algeria
TUN TUNISIA
WAN MOROCCO
XSG UAE
XSS UAE
AFR Kenya
ECT Nigeria
FWD MOROCCO
KEN Kenya
TUR TURKEY
In case not found your CSC, click here.
Thanks to @Ailir for his solution for changing CSC code.
Please press :good: If had helped you. Thanks
I am on stock XXAMF5 and *#272*IMEI still works. I don't know why it doesnt work on yours. Thanks anyway for your post .
I also used Samsung Galaxy S/S2/S3 CSC without any issues. But since I used kitchen procedure to customize rom I dont need csc changer anymore.
Sent from my GT-i9082 using xda app-developers app
soralz said:
HOW TO CHANGE CSC CODE ON SAMSUNG GALAXY GRAND DUOS I9082/I9082L
4. Grant SU permission for ES File Explorer then select Root Explorer, select Mount R/W, again select both Path RW permission.
Click to expand...
Click to collapse
Thanks a lot soralz - you're GREAT. #4 That was it. Now I have XEO :good:
This really worked, thanks a lot.
Thanks for wonderful work.
Jason R.
abrarfsd said:
Thanks for wonderful work.
Click to expand...
Click to collapse
Does it work for a galaxy Ace "S7560MVLAMA5" ???
THANKS!
Huge thanks for this method.
What is the use for changing csc code????
Sent from my GT-I9082 using xda app-developers app
Of course!
Preshak said:
What is the use for changing csc code????
Sent from my GT-I9082 using xda app-developers app
Click to expand...
Click to collapse
Bringing back to KIES!
an easier way
Hello to everyone. One method, wich worked like a charm for me, on Samsung Galaxy Y Pro B5510 it was:
I downloaded two firmware from internet:
-one wich contains latest firmware, and one wich contains my country region;
-i splitted the files using Cygwin +SplitFUS2 (see tutorials from here, in this forum), for both firmwares;
-after that, I made a folder with ex. "custom firmware" where i put these files:
-PDA and MODEM from the latest firmware( already splitted), and the CSC code I put it from my country region firmware(already splitted).
-to work in Odin you have to rename the CSC from your country code with the exactly name from the latest CSC firmware code.
-how to flash with Odin, it's also somewhere here a tutorial.
Now i have the latest firmware from another country, and the CSC code from my country (my tst. works like a charm).
For any infos, please contact me in PM,
It was also difficult for me, at the beginning to understand how to flash my phone, and change file..etc., but now it's clear. For that i will say , if you need help I will try to help you. Bye!
soralz said:
how to change csc code on samsung galaxy grand duos i9082/i9082l
hi guys, i created this topic in order to help those who are unable to change their csc code to back to their stock firmware region's csc code in order to reclaim their warranty.
Please don't flame me if i did anything wrong, just kindly advice me
*i tried on i9082, it should be work on i9082l as well.
**have you noticed even you have reset-ed your bin counter and flash back official firmware, you are still 1-step closer to reclaim your warranty? Which is the csc code. Even you are on official firmware, samsung will still know you have already flashed custom firmware before and they can refuse to help you repair or whatever to fix your phone if you have any hardware problems.
This is for those who are running on custom rom before such as cyanogenmod (like me ) or other different region's firmware, which will eventually mess up your phone's original csc code when you are trying to restore to official/stock firmware.
if you are using the correct csc code on your phone and country, or you have successfully changed the csc code using csc changer. You can skip this.
csc code a.k.a customer sales code.
Since the *#272*-imei-# code doesn't work on ics or jb anymore, this gets our job a little bit harder. :crying:
I will guide you using my method. Which it works for me. :fingers-crossed:
Steps:
1a. If you are on cm rom or baliboxer's rom etc, download stock firmware from sammobile.com and directly flash stock firmware which contains the correct regional code for your device through odin. (normally a stock rom from sammobile will contains several regions csc. Make sure you have downloaded the firmware which contains your region's csc.)
after flash, just root the stock rom. You knew the drill.
or
1b. You are on stock rom but is on other's region firmware and is rooted (based on samsung official firmware). Same, just download your stock latest update firmware from sammobile.com first. Which contains your region's csc.
2. Ok, now both are on a stock rom but rooted, check your csc using the csc changer app. You will see like this:
*warning, installing csc code will wipe the data of your phone.
**try install the csc for your region, if you are not able to change back to your region's csc, continue the procedure below. Else if you have successfully changed it, (check again by installing the app again) reset your bin counter using triangle away app, reboot and put your phone in download mode (do not enter cwm recovery again as it will increase the bin counter). Flash back the same firmware you've downloaded, and you are done. Just like as you firstly bought the phone. (check it by entering stock recovery, you will see a text like: "applied multi-csc: Xme"
3. If not working, then install es file explorer from playstore or link below (recommended) or other file browser with root access ability. Open the side menu and select root explorer.
4. Grant su permission for es file explorer then select root explorer, select mount r/w, again select both path rw permission.
5. After that browse and open using es note editor (recommended) mps_code.dat file located in /efs/imei/.
Change to the code you want and save it.
6. Again browse and open using es note editor (recommended) sales_code.dat file located in /system/csc/.
Change to the code you want and save it.
7. Alright all done, reboot your phone first. Then reset the bin counter using triangle away. (again, friendly reminder: Do not enter cwm recovery again as it will increase the bin counter) reboot and put your phone in download mode. Flash the stock rom you've downloaded though odin.
8. After flash, remember you must go into stock recovery immediately the first recovery screen appears. (which got a blue line running with the android doll, after that your phone will reboot. Press the recovery buttons as soon the doll disappears)
9. Check if your phone had applied the correct csc for your region.
*this is not my phone, pics taken from google image.
10. That's it, do a wipe of data/cache, and reboot your phone. You are on fully official stock samsung rom.
Sorry for my weak english.
list of csc code:
Ato austria
aut switzerland
cos greece
cpw uk & ire
cyo greece
eir ireland
eur greece
fop spain
itv italy
moo austria
pan hungary
phe spain
tph portugal
xef france
xeh hungary
xeo poland
xeu uk & ire
xez czech republic
xsk slovakia
alb albania
cnx romania
coa romania
ero bosnia
gbl bulgaria
mot slovenia
msr serbia
pmn montenegro
sim slovenia
tmt montenegro
top serbia
tra croatia
two croatia
alo ukraine
ftd ukraine
mbc mongolia
msg ukraine
sek ukraine
ser russia
skz kazakhstan
vhc ukraine
etr bangladesh
ins india
inu india
npl nepal
slk sri lanka
tml bangladesh
glb philippines
mm1 singapore
sin singapore
sma philippines
sth singapore
thl thailand
xev vietnam
xme malaysia
xse indonesia
xsp singapore
xtc philippines
xte philippines
abs tunisia
afg afghanistan
btc libya
egy egypt
jed ksa
ksa ksa
mat morocco
med morocco
mid iraq
mmc libya
mrt mauritania
mwd morocco
pak pakistan
thr iran
tmc algeria
tun tunisia
wan morocco
xsg uae
xss uae
afr kenya
ect nigeria
fwd morocco
ken kenya
tur turkey
in case not found your csc, click here.
Thanks to ailir for his solution for changing csc code.
Please press :good: If had helped you. Thanks
Click to expand...
Click to collapse
i would like to know what the csc on my i9300 as i got running on cyanogenmod custom rom and so i did know which stock firmware came on it originally and would like to revert back to stock but i dont know which correct stock firmware to download,can you please assist me!!!!
Fedz7 said:
i would like to know what the csc on my i9300 as i got running on cyanogenmod custom rom and so i did know which stock firmware came on it originally and would like to revert back to stock but i dont know which correct stock firmware to download,can you please assist me!!!!
Click to expand...
Click to collapse
You came from which country?
soralz said:
You came from which country?
Click to expand...
Click to collapse
i am located in Jamaica but i am not sure where the phone itself came from, because i got it running a custom rom
Fedz7 said:
i am located in Jamaica but i am not sure where the phone itself came from, because i got it running a custom rom
Click to expand...
Click to collapse
Here, you can try this.
It is for:
Dominican Republic, Jamaica, Venezuela, Brazil, Chile, Panama, Uruguay, Argentina and Trinidad and Tobago
Click to expand...
Click to collapse
Source
soralz said:
Here, you can try this.
It is for:
Source
Click to expand...
Click to collapse
So even though the phone isn't of Jamaican orgin or from Jamaica i can flash this stock rom that you recommend and it wont give any issues, everything will work as they should???
Fedz7 said:
So even though the phone isn't of Jamaican orgin or from Jamaica i can flash this stock rom that you recommend and it wont give any issues, everything will work as they should???
Click to expand...
Click to collapse
Yea of course, you can click the source to check it out.
hello man
I'm from IRAQ
mine is always AFR in CSC changer
I follweed ur procedure now when i seen *#1234#
CSC is un known!!
what's solution?
Galaxy I9082
________________________
from Iraq
------------------------------------------
thanx alot
(SAMPUTER) on facebook also\by a way I have Z3x & Tornado box.
SAMPUTER said:
I'm from IRAQ
mine is always AFR in CSC changer
I follweed ur procedure now when i seen *#1234#
CSC is un known!!
what's solution?
Galaxy I9082
________________________
from Iraq
------------------------------------------
thanx alot
(SAMPUTER) on facebook also\by a way I have Z3x & Tornado box.
Click to expand...
Click to collapse
What CSC did you keyed in mps_code.dat file?
Screenshots are down, I try to update it later, lucky the Galaxy Grand my mum still using.
don't worr
soralz said:
What CSC did you keyed in mps_code.dat file?
Screenshots are down, I try to update it later, lucky the Galaxy Grand my mum still using.
Click to expand...
Click to collapse
--------------------------------- my regard ---------------------------------------------
solved by flashing it with pre-rooted device and recovery mode
TouchWiz Revolution V5[Mirror-link]
http://forum.xda-developers.com/showthread.php?t=2698242
after that flashed by official frimware from sammobile
How to add csc code
How to add csc in SHV-e110s?
Its from south korea.
My fone is not yet rooted.
And i have stock firmware.
Im from philippines
Thanks for your help
In this thread, You can share the Mega-Links of new firmware's (OFFICIAL STOCK) for the Galaxy S7 (so: NO CUSTOM ROM's and/or ROOT-talk)...
How to flash firmware to your phone:
WARNING WARNING WARNING -> Before flashing, ACTIVATE PIN in "Secure startup" (You'll be asked for it AFTER flashing!)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WARNING WARNING WARNING -> Before flashing, ACTIVATE PIN in "Secure startup" (You'll be asked for it AFTER flashing!)
1. Extract (un-rar) the firmware file (i.e. to folder c:\Odin) ***
2. Download Odin v3.11.1
3. Extract Odin ZIP file (i.e. to folder c:\Odin)
4. Open Odin v3.11.1
5. Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
6. Connect phone and wait until you get a blue sign in Odin
7. Add the firmware files to their designated slots
8. Make sure re-partition is NOT ticked
9. Click the start button, sit back and wait few minutes
*** You can always find the LATEST firmware in msg #2
The main file, is made for the Netherlands (CSC=PHN).
If you have another CSC, i.e. SEB (Baltic):
1. download the MAIN-file and extract AP BL & CP
2. download the latest firmware for your country, and extract the HOME_CSC of your country
3. Place the extracted files (including YOUR HOME_CSC in the designated slots of Odin)
With Odin v3.11.1, you DON'T HAVE TO ALTER the HOME_CSC anymore! (this was necessary in previous Odin v3.10.7 (that version couldn't handle with the "folder" in the HOME_CSC and Odin would "freeze!); this problem is SOLVED in v3.11.1!)
Latest Firmware Netherlands - PHN
WARNING WARNING WARNING -> Before flashing, ACTIVATE PIN in "Secure startup" (You'll be asked for it AFTER flashing!)
WARNING WARNING WARNING -> Before flashing, ACTIVATE PIN in "Secure startup" (You'll be asked for it AFTER flashing!)
This ROM is based on the the latest ROM for Netherlands (PHN) released 19 may 17.
This is official Samsung ROM, so KNOX won't be triggered!
Note: after install of this ROM, you won't receive OTA-updates!
Your data will stay intact, but it's possible you get "com.android.****** has stopped" -> Then a Factory Reset is needed (in Recovery)!
What's new:
* Android 7.0
* May security patches (Samsung Android Security Updates)
* Stability Improvements
Model SM-G930F
Model name Galaxy S7
Country Netherlands
Version Android 7
Changelist 11104523
Build date Wed, 10 May 2017 11:06:47 +0000
Security Patch Level 2017-05-01
Product code PHN
PDA G930FXXU1DQE7
CSC G930FPHN1DQD1
Download for install with Odin 3.12.3: MegaNZ
UN-ZIP the archive and place the files in the designated slots in Odin 3.12.3
This package contains the HOME_CSC of the Netherlands (PHN); if you want the HOME_CSC of your own country/region, download the latest firmware of your country/region and extract the HOME_CSC which you can use with the BL AP & CP of the main package!
G930FXXU1APDQ (Netherlands - PHN)
WARNING WARNING WARNING -> Before flashing, ACTIVATE PIN in "Secure startup" (You'll be asked for it AFTER flashing!)
Before flashing, ACTIVATE PIN in "Secure startup" (You'll be asked for it AFTER flashing!)
This ROM is based on the latest ROM for Mexico released 28 apr 16 and made it compatible for the UN-Branded Netherlands (PHN) S7.
This is official Samsung ROM, so KNOX won't be triggered!
Your data will stay intact, but it's always best to make a back-up!
What's new:
* May security patches (Samsung Android Security Updates)
* Stability Improvements
Model SM-G930F
Model name Galaxy S7
Country Netherlands
Version Android 6.0.1
Changelist 7538748
Build date Fri, 22 Apr 2016 05:04:40 +0000
Product code PHN
PDA G930FXXU1APDQ
CSC G930FPHN1APC5
Download for install with Odin 3.10.7: MegaNZ
UN-RAR the archive and place the files in the designated slots in Odin 3.10.7
For Germany Un-branded DBT, replace HOME_CSC with:
HOME_CSC_DBT
For United Kingdom Un-branded BTU, replace HOME_CSC with:
HOME_CSC_BTU
G930FXXU1APDU (Netherlands - PHN)
WARNING WARNING WARNING -> Before flashing, ACTIVATE PIN in "Secure startup" (You'll be asked for it AFTER flashing!)
WARNING WARNING WARNING -> Before flashing, ACTIVATE PIN in "Secure startup" (You'll be asked for it AFTER flashing!)
This ROM is based on the latest ROM for NorDic released 10 may 16 and made it compatible for the UN-Branded Netherlands (PHN) S7.
This is official Samsung ROM, so KNOX won't be triggered!
Your data will stay intact, but it's always best to make a back-up!
What's new:
* May security patches (Samsung Android Security Updates)
* Stability Improvements
Model SM-G930F
Model name Galaxy S7
Country Netherlands
Version Android 6.0.1
Changelist 7538748
Build date Wed, 27 Apr 2016 07:11:14 +0000
Product code PHN
PDA G930FXXU1APDU
CSC G930FPHN1APC5
Download for install with Odin 3.10.7: MegaNZ
UN-RAR the archive and place the files in the designated slots in Odin 3.10.7
For Germany Un-branded DBT, replace HOME_CSC with:
HOME_CSC_DBT
For United Kingdom Un-branded BTU, replace HOME_CSC with:
HOME_CSC_BTU
Please have you got Home_csc XEF ?
gregman26 said:
Please have you got Home_csc XEF ?
Click to expand...
Click to collapse
See msg #2
henklbr said:
WARNING WARNING WARNING -> Before flashing, ACTIVATE PIN in "Secure startup" (You'll be asked for it AFTER flashing!)
WARNING WARNING WARNING -> Before flashing, ACTIVATE PIN in "Secure startup" (You'll be asked for it AFTER flashing!)
This ROM is based on the latest ROM for NorDic released 10 may 16 and made it compatible for the UN-Branded Netherlands (PHN) S7.
This is official Samsung ROM, so KNOX won't be triggered!
Your data will stay intact, but it's always best to make a back-up!
What's new:
* May security patches (Samsung Android Security Updates)
* Stability Improvements
Model SM-G930F
Model name Galaxy S7
Country Netherlands
Version Android 6.0.1
Changelist 7538748
Build date Fri, 27 Apr 2016 05:04:40 +0000
Product code PHN
PDA G930FXXU1APDU
CSC G930FPHN1APC5
Download for install with Odin 3.10.7: MegaNZ
UN-RAR the archive and place the files in the designated slots in Odin 3.10.7
For Germany Un-branded DBT, replace HOME_CSC with:
HOME_CSC_DBT
For United Kingdom Un-branded BTU, replace HOME_CSC with:
HOME_CSC_BTU
Click to expand...
Click to collapse
Will I get official OTA updates if I flash this ROM over my official PHN rom?
raj_p said:
Will I get official OTA updates if I flash this ROM over my official PHN rom?
Click to expand...
Click to collapse
When there's a NEWER BUILD - > YES [emoji106]
Read the instructions before flashing!
Verstuurd vanaf mijn SM-T700 met Tapatalk
henklbr said:
See msg #2
Click to expand...
Click to collapse
How should I do?
gregman26 said:
How should I do?
Click to expand...
Click to collapse
In msg #2 is the download link for XEF
Read the instructions before flashing, set PIN in secure startup!
Verstuurd vanaf mijn SM-T700 met Tapatalk
Thx ! I have a XEO csc, i would like a XEF. I flash with XEF Home_csc XEF ? Thanks
gregman26 said:
Thx ! I have a XEO csc, i would like a XEF. I flash with XEF Home_csc XEF ? Thanks
Click to expand...
Click to collapse
Do you want permanent XEF on your phone, or temporarely XEF?
Why do you want to change from XEO to XEF?
hi
why to do this?
"Before flashing, ACTIVATE PIN in "Secure startup"" ?
and If I place XEH CSC it will goest to XEH from TPH, OR XEO?
thanxs
i have an italian galaxy s7, can i flash the netherland rom?
G930FXXU1APE9 (Netherlands - PHN)
WARNING WARNING WARNING -> Before flashing, ACTIVATE PIN in "Secure startup" (You'll be asked for it AFTER flashing!)
WARNING WARNING WARNING -> Before flashing, ACTIVATE PIN in "Secure startup" (You'll be asked for it AFTER flashing!)
This ROM is based on the latest ROM for India released 23 may 16 and made it compatible for the UN-Branded Netherlands (PHN) S7.
This is official Samsung ROM, so KNOX won't be triggered!
Your data will stay intact, but it's always best to make a back-up!
What's new:
* May security patches (Samsung Android Security Updates)
* Stability Improvements
Model SM-G930F
Model name Galaxy S7
Country Netherlands
Version Android 6.0.1
Changelist 8040641
Build date Tue, 10 May 2016 07:11:14 +0000
Product code PHN
PDA G930FXXU1APE9
CSC G930FPHN1APC5
Download for install with Odin 3.10.7: MegaNZ
UN-RAR the archive and place the files in the designated slots in Odin 3.10.7
For Germany Un-branded DBT, replace HOME_CSC with:
HOME_CSC_DBT
For United Kingdom Un-branded BTU, replace HOME_CSC with:
HOME_CSC_BTU
For France Un-branded XEF, replace HOME_CSC with:
HOME_CSC_XEF
Thanks a lot sir. Very generous posts.
henklbr said:
WARNING WARNING WARNING -> Before flashing, ACTIVATE PIN in "Secure startup" (You'll be asked for it AFTER flashing!)
WARNING WARNING WARNING -> Before flashing, ACTIVATE PIN in "Secure startup" (You'll be asked for it AFTER flashing!)
Model SM-G930F
Model name Galaxy S7
Country Netherlands
Version Android 6.0.1
Changelist 8040641
Build date Tue, 10 May 2016 07:11:14 +0000
Product code PHN
PDA G930FXXU1APE9
CSC G930FPHN1APC5
Download for install with Odin 3.10.7: MegaNZ
HOME_CSC_XEF
Click to expand...
Click to collapse
Hey bro is this latest one ?
http://www.sammobile.com/2016/05/21...s7-edge-get-an-update-with-various-bug-fixes/
can i install this rom with odin in my italian galaxy s7?
zarelli said:
can i install this rom with odin in my italian galaxy s7?
Click to expand...
Click to collapse
Yes, you can...
The enclosed HOME_CSC is the main package is PHN
Don't forget to set PIN in secure startup
bleros said:
Hey bro is this latest one ?
http://www.sammobile.com/2016/05/21...s7-edge-get-an-update-with-various-bug-fixes/
Click to expand...
Click to collapse
Yes: this ROM has been released today
I bought the phone in Carphone Warehouse in the UK, unlocked, with Marshmallow at the time. Sadly, I don't remember what CSC I was on at the time, but I am 90% certain it was XEU (UK / Ireland, unbranded).
I was on Nougat beta, officially through OTA and Galaxy Beta Programme app. Once Nougat became available, I flashed final BTU firmware with Odin, including the CSC field because I wanted to reset everything and start from scratch.
BTU DPLT https://www.sammobile.com/firmwares/galaxy-s7-edge/SM-G935F/BTU/download/G935FXXU1DPLT/120208/
All good, everything works, apart from OTA updates... I am stuck on January security patch and I do not really know why.
Currently, recovery screen and Phone Info app tells me that I am on XEU, even though I flashed BTU CSC file quite a while ago.
Question is, how do I get OTA back?
Not sure which one am I supposed to download:
BTU DQD7 https://www.sammobile.com/firmwares/galaxy-s7-edge/SM-G935F/BTU/download/G935FXXU1DQD7/130721/
XEU DQD7 https://www.sammobile.com/firmwares/galaxy-s7-edge/SM-G935F/XEU/download/G935FXXU1DQD7/131369/
...and what packages am I supposed to flash, i.e. just AP field, with or without CSC?
Someone told me to deregister from Beta programme, but the sideloaded app obviously does not work anymore, server errors.
Software Info screen:
NRD90M.G935FXXU1DPLT
Security patch level: January 1, 2017
Software Update screen:
The latest updates have been already installed.
Current version: G935FXXU1DPLT/G935FOXA1DPLT/G935FXXU1DPLT
Phone Info - CSC CODE section
Product Code: SM-935FZKAXEU
Original CSC Code: [empty]
Firmware's CSC Code: XEU
Active CSC Code: XEU
Available CSC Codes: BTU, CPW, DBT, ITV, KOR, NEE, XEF, XEO, XEU
CSC Country: UK & IRE / GB
Mobile Operator: 3 / 23420
Phone Info - Firmware section
Bootloader Version: G935FXXU1DPLT
PDA Version: G935FXXU1DPLT
CSC Version: G935FOXA1DPLT
Baseband Version: G935FXXU1DPLT
Latest Firmware: G935FXXU1DQD7/G935FXEU1DQD1/G935FXXU1DQD7
I'm also still also in january security patch. I had read somewhere that it's normal, because this updates are regional updates, so some regions need it more often and others don't. No need to worry about.
mestiso said:
I bought the phone in Carphone Warehouse in the UK, unlocked, with Marshmallow at the time. Sadly, I don't remember what CSC I was on at the time, but I am 90% certain it was XEU (UK / Ireland, unbranded).
I was on Nougat beta, officially through OTA and Galaxy Beta Programme app. Once Nougat became available, I flashed final BTU firmware with Odin, including the CSC field because I wanted to reset everything and start from scratch.
https://www.sammobile.com/firmwares/galaxy-s7-edge/SM-G935F/BTU/download/G935FXXU1DPLT/120208/
All good, everything works, apart from OTA updates... I am stuck on January security patch and I do not really know why.
Currently, recovery screen and Phone Info app tells me that I am on XEU, even though I flashed BTU CSC file quite a while ago.
Not sure which one am I supposed to download:
https://www.sammobile.com/firmwares/galaxy-s7-edge/SM-G935F/BTU/download/G935FXXU1DQD7/130721/
https://www.sammobile.com/firmwares/galaxy-s7-edge/SM-G935F/XEU/download/G935FXXU1DQD7/131369/
...and what packages am I supposed to flash to be back on OTA, i.e. just AP field, with or without CSC?
Someone told me to deregister from Beta programme, but the sideloaded app obviously does not work anymore, server errors.
Software Info screen:
NRD90M.G935FXXU1DPLT
Security patch level: January 1, 2017
Software Update screen:
The latest updates have been already installed.
Current version: G935FXXU1DPLT/G935FOXA1DPLT/G935FXXU1DPLT
Phone Info - CSC CODE section
Product Code: SM-935FZKAXEU
Original CSC Code: [empty]
Firmware's CSC Code: XEU
Active CSC Code: XEU
Available CSC Codes: BTU, CPW, DBT, ITV, KOR, NEE, XEF, XEO, XEU
CSC Country: UK & IRE / GB
Mobile Operator: 3 / 23420
Phone Info - Firmware section
Bootloader Version: G935FXXU1DPLT
PDA Version: G935FXXU1DPLT
CSC Version: G935FOXA1DPLT
Baseband Version: G935FXXU1DPLT
Latest Firmware: G935FXXU1DQD7/G935FXEU1DQD1/G935FXXU1DQD7
Click to expand...
Click to collapse
I'm on the April 1 on 3 network uk
Sent from my SM-G935F using Tapatalk 2
Hi, I'm not sure it will help you but when I flashed to the BTU CSC from Virgin's VIR I had to do it twice, the first time I used the home CSC because I wanted to keep my files, but then found out I was still on Virgin's CSC. I then flashed it again but used the regular CSC and started from scratch and it worked. I've been getting the updates ever since. As for which files you should use, I think I used all of them included in the folder that I downloaded from SamMobile.
In this thread, You can share the Links of new firmware's (OFFICIAL STOCK) for the Galaxy S20 Ultra (so: NO CUSTOM ROM's and/or ROOT-talk)...
How to flash firmware to your phone:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1. Extract (un-rar) the firmware file (i.e. to folder c:\Odin) ***
2. Download Odin v3.14.4
3. Extract Odin ZIP file (i.e. to folder c:\Odin)
4. Open Odin v3.14.4
5. Power OFF your Galaxy S20 Ultra
6. Reboot Phone in Download Mode (1st plug-in USB-cable to your S20 ULTRA, push Volume Up + Volume Down buttons, while pushing them plug-in USB-cable to PC
7. Wait until you get a blue sign in Odin
8. Add the firmware files to their designated slots
9. Make sure re-partition is NOT ticked
10. Click the start button, sit back and wait few minutes
*** You can always find the LATEST firmware in post #2***
Original Post created by henklbr.
LATEST FIRMWARE S20 ULTRA:
This ROM is the latest ROM for Multi-CSC OXM released 08 JUN 20, and can be used for ALL CSC's mentioned in Multi-CSC OXM
This is official Samsung ROM, so KNOX won't be triggered!
Model: SM-G988B
Model name: Galaxy S20 Ultra
Version: Android 10
Changelist: 18862671
Build date: Mon, 08 Jun 2020 06:59:35 +0000
Security Patch Level 2020-06-01
Product code: ROM
PDA: G988BXXU2ATF5
CSC: G988BOXM2ATF5
Download FRIJA: FRIJA
UN-ZIP the archive and place the files in the designated slots in Odin 3.14.4
HOME_CSC_OXM -> data will stay intact
CSC_OXM -> device will reset
Might want to edit the first line. It says it's for the Note 10+
nintendolinky said:
LATEST FIRMWARE S20 ULTRA:
This ROM is the latest ROM for Multi-CSC OXM released 12 Mar 20, and can be used for ALL CSC's mentioned in Multi-CSC OXM
This is official Samsung ROM, so KNOX won't be triggered!
What's new:
* Improved Performance Camera
* The security of your device has been improved
Model SM-G988B
Model Name: Galaxy S20 Ultra
Version: Android 10
Changelist: 18186339
Build date: Thu, 12 Mar 2020 10:31:45 +0000
Security Patch Level: 2020-03-01
Product code BTC
PDA: G988BXXU1ATCH
CSC: G988BOXM1ATCH
DOWNLOAD WITH FRIJA
UN-ZIP the archive and place the files in the designated slots in Odin 3.14.4
HOME_CSC_OXM -> data will stay intact
CSC_OXM -> device will reset
SM-G988B OXM multi-CSC:
ACR AFG AFR ATO AUT BGL BNG CAC CAM CAU CHO COO DBT DKR ECT EGY EON EUR GTO ILO INS ITV KSA LAO LUX MID MWD MXO MYM NEE NPL ORX PAK PEO PHE PHN ROM SEB SEE SEK SKZ SLK SMP THL TPH TTT TUN TUR XEF XEH XEO XEU XEZ XFE XME XSG XSP XTC XXV
BKD BTC BTU CPW GLB ILP LYS MM1 NZC OPS SER SIN SIO SMA STH TEL TNZ TPA VAU VNZ XFA XFV XNZ XSA
By default : BTU
Click to expand...
Click to collapse
So in Frija I put CSC ILO, BTC or BTU?
Thanks in advance
Commies said:
Might want to edit the first line. It says it's for the Note 10+
Click to expand...
Click to collapse
Thanks
nintendolinky said:
Thanks
Click to expand...
Click to collapse
Also on step 5 it says "Power OFF your Note10+"
nintendolinky said:
In this thread, You can share the Mega-Links of new firmware's (OFFICIAL STOCK) for the Galaxy S20 Ultra (so: NO CUSTOM ROM's and/or ROOT-talk)...
How to flash firmware to your phone:
1. Extract (un-rar) the firmware file (i.e. to folder c:\Odin) ***
2. Download Odin v3.14.4
3. Extract Odin ZIP file (i.e. to folder c:\Odin)
4. Open Odin v3.14.4
5. Power OFF your Note10+
6. Reboot Phone in Download Mode (1st plug-in USB-cable to your S20 ULTRA, push Volume Up + Volume Down buttons, while pushing them plug-in USB-cable to PC
7. Wait until you get a blue sign in Odin
8. Add the firmware files to their designated slots
9. Make sure re-partition is NOT ticked
10. Click the start button, sit back and wait few minutes
*** You can always find the LATEST firmware in msg #2
Click to expand...
Click to collapse
It would be very nice to mention, where you got this info (mention)...
Furthermore: if you are COPYING things from my thread, then correct the items from Note10+ to S20Ultra!
---------- Post added at 07:48 ---------- Previous post was at 07:44 ----------
nintendolinky said:
LATEST FIRMWARE S20 ULTRA:
This ROM is the latest ROM for Multi-CSC OXM released 12 Mar 20, and can be used for ALL CSC's mentioned in Multi-CSC OXM
This is official Samsung ROM, so KNOX won't be triggered!
What's new:
* Improved Performance Camera
* The security of your device has been improved
Model SM-G988B
Model Name: Galaxy S20 Ultra
Version: Android 10
Changelist: 18186339
Build date: Thu, 12 Mar 2020 10:31:45 +0000
Security Patch Level: 2020-03-01
Product code BTC
PDA: G988BXXU1ATCH
CSC: G988BOXM1ATCH
DOWNLOAD WITH FRIJA
UN-ZIP the archive and place the files in the designated slots in Odin 3.14.4
HOME_CSC_OXM -> data will stay intact
CSC_OXM -> device will reset
SM-G988B OXM multi-CSC:
ACR AFG AFR ATO AUT BGL BNG CAC CAM CAU CHO COO DBT DKR ECT EGY EON EUR GTO ILO INS ITV KSA LAO LUX MID MWD MXO MYM NEE NPL ORX PAK PEO PHE PHN ROM SEB SEE SEK SKZ SLK SMP THL TPH TTT TUN TUR XEF XEH XEO XEU XEZ XFE XME XSG XSP XTC XXV
BKD BTC BTU CPW GLB ILP LYS MM1 NZC OPS SER SIN SIO SMA STH TEL TNZ TPA VAU VNZ XFA XFV XNZ XSA
By default : BTU
Click to expand...
Click to collapse
If you're COPYING things from my thread (without even mentioning it ), do it CORRECTLY!
The CSC's of Multi-CSC OXM for the S20Ultra are WRONG! They are NOT the same as for the Note10+!
henklbr said:
It would be very nice to mention, where you got this info (mention)...
Furthermore: if you are COPYING things from my thread, then correct the items from Note10+ to S20Ultra!
---------- Post added at 07:48 ---------- Previous post was at 07:44 ----------
If you're COPYING things from my thread (without even mentioning it ), do it CORRECTLY!
The CSC's of Multi-CSC OXM for the S20Ultra are WRONG! They are NOT the same as for the Note10+!
Click to expand...
Click to collapse
Nvm figured it out. Flashed new firmware to my device. Thanks.
henklbr said:
It would be very nice to mention, where you got this info (mention)...
Furthermore: if you are COPYING things from my thread, then correct the items from Note10+ to S20Ultra!
---------- Post added at 07:48 ---------- Previous post was at 07:44 ----------
If you're COPYING things from my thread (without even mentioning it ), do it CORRECTLY!
The CSC's of Multi-CSC OXM for the S20Ultra are WRONG! They are NOT the same as for the Note10+!
Click to expand...
Click to collapse
Apologies mate, I'll edit the thread later it was a quick job as I notified you hadn't created a thread yet. I'll remove it if you like or I'll edit this and mention you, what do you prefer?
nintendolinky said:
Apologies mate, I'll edit the thread later it was a quick job as I notified you hadn't created a thread yet. I'll remove it if you like or I'll edit this and mention you, what do you prefer?
Click to expand...
Click to collapse
You continue with the thread; I don't have my S20Ultra yet (May 20th 512GB-version); but do mention me in msg #1 -> I'd appreciate that
Thanks for doing this thread :good:
The correct OXM-CSC's can be found here: https://forum.xda-developers.com/showpost.php?p=81910661&postcount=2 (but don't copy that picture without mentioning the poster...)
This ATCH update is officially out also for the 988u1 model also. Just got the update last night.
freebee269 said:
This ATCH update is officially out also for the 988u1 model also. Just got the update last night.
Click to expand...
Click to collapse
What version were you coming from? Mine says up to date.
arcanexvi said:
What version were you coming from? Mine says up to date.
Click to expand...
Click to collapse
Don't know what you mean by what am I coming from. It's a g988u1. The Snapdragon unlocked version.
I am on SIN(Singapore) official firmware. Can I sideload this firmware?
freebee269 said:
Don't know what you mean by what am I coming from. It's a g988u1. The Snapdragon unlocked version.
Click to expand...
Click to collapse
I meant what firmware version were you coming from prior.
arcanexvi said:
I meant what firmware version were you coming from prior.
Click to expand...
Click to collapse
Oh I see. The firmware that was previous to this one. Forget the version letters. ATBM or something like that.
FinalBossJay said:
Nvm figured it out. Flashed new firmware to my device. Thanks.
Click to expand...
Click to collapse
What did u use?
shollywood said:
What did u use?
Click to expand...
Click to collapse
Odin and firmware for ATT from SamMobile
FinalBossJay said:
Odin and firmware for ATT from SamMobile
Click to expand...
Click to collapse
Does it matter which one we get? I use T-Mobile, but I have the unlocked version. They don't have the updated firmware for T-Mobile specifically..
I loaded the unlocked via ota last night. Worst case load the unlocked one via odin
Sent from my [device_name] using XDA-Developers Legacy app