Database Users

[Q] Recovering... recovery, after Lollipop official image installation

Hello everyone!
I used to have TWRP 2.8 and a custom rom installed on my Nexus 4. After the official Lollipop image came out, I installed it and everything works fine, except the fact that there seems to be no recovery at all. When I try to enter recovery and the phone reboots, I get the green-robot-error image. While installing the Lollipop image, I read the messages and it said that boot.sig and recovery.sig were not found. I tried installing TWRP over again, but nothing changed. Everything else works fine on the phone, fastboot, Lollipop, I even rooted with no problems. How do I properly reinstall TWRP on my device, without getting the green robot of death icon?

I have same problem, the OS reinstall default recovery every reboot, if you install TWRP via fastboot mode and directly reboot into TWRP recovery mode is there and it works, but after reboot to systen it's gone.
How have rooted Lollipop? SuperSU I install from TWRP and tells me that binary super are missing.
Here is the solution, but I dont have su
http://forum.xda-developers.com/nexus-4/help/guide-ultimate-nexus-4-root-guide-t2018179

common issue at this point. It appears recovery isnt sticking for some reason.

kokotron said:
Hello everyone!
I used to have TWRP 2.8 and a custom rom installed on my Nexus 4. After the official Lollipop image came out, I installed it and everything works fine, except the fact that there seems to be no recovery at all. When I try to enter recovery and the phone reboots, I get the green-robot-error image. While installing the Lollipop image, I read the messages and it said that boot.sig and recovery.sig were not found. I tried installing TWRP over again, but nothing changed. Everything else works fine on the phone, fastboot, Lollipop, I even rooted with no problems. How do I properly reinstall TWRP on my device, without getting the green robot of death icon?
Click to expand...
Click to collapse
I advise you to read more in future to keep yourself away from such troubles.
Installing a Factory Image sends your device back to completely stock, this includes all the partitions, i.e System, Data, Cache, Recovery. Just think of it resembling the newly bought device. The Red icon means you now have the stock recovery installed. You now need to Install the custom recovery (TWRP) again.
Download TWRP Recovery Image: Click here
Power Off Nexus 4
Boot into Bootloader/Fastboot mode. Press VolDown + Power buttons altogether to reboot into bootloader mode.
Connect the device to the PC via USB data cable
Open a new CMD window
"cd" the command line window to the location of the downloaded image and enter the following command thereafter:
Code:
fastboot flash recovery openrecovery-twrp-2.8.1.0-mako.img
And you'll be able to boot into recovery mode.

sidVici0us said:
I have same problem, the OS reinstall default recovery every reboot, if you install TWRP via fastboot mode and directly reboot into TWRP recovery mode is there and it works, but after reboot to systen it's gone.
How have rooted Lollipop? SuperSU I install from TWRP and tells me that binary super are missing.
Click to expand...
Click to collapse
For rooting, I used the file and the guide in the following thread, it doesn't require recovery, just fastboot mode.
http://forum.xda-developers.com/nexus-4/orig-development/n4-cf-auto-root-t2025274

kokotron said:
For rooting, I used the file and the guide in the following thread, it doesn't require recovery, just fastboot mode.
http://forum.xda-developers.com/nexus-4/orig-development/n4-cf-auto-root-t2025274
Click to expand...
Click to collapse
http://forum.xda-developers.com/nexus-4/help/guide-ultimate-nexus-4-root-guide-t2018179
A solution for auto swpan defualt recovery, the file is there only rename it

DJBhardwaj said:
I advise you to read more in future to keep yourself away from such troubles.
Installing a Factory Image sends your device back to completely stock, this includes all the partitions, i.e System, Data, Cache, Recovery. Just think of it resembling the newly bought device. The Red icon means you now have the stock recovery installed. You now need to Install the custom recovery (TWRP) again.
Download TWRP Recovery Image: Click here
Power Off Nexus 4
Boot into Bootloader/Fastboot mode. Press VolDown + Power buttons altogether to reboot into bootloader mode.
Connect the device to the PC via USB data cable
Open a new CMD window
"cd" the command line window to the location of the downloaded image and enter the following command thereafter:
Code:
fastboot flash recovery openrecovery-twrp-2.8.1.0-mako.img
And you'll be able to boot into recovery mode.
Click to expand...
Click to collapse
As I mentioned in my post, I did try to reinstall TWRP. I did it exactly the way you are describing. Still no recovery. The robot icon I'm describing is a common image when something's wrong on an android device and has nothing to do with stock recovery. Thanks a lot for taking the time to post all these info, though!

sidVici0us said:
I have same problem, the OS reinstall default recovery every reboot, if you install TWRP via fastboot mode and directly reboot into TWRP recovery mode is there and it works, but after reboot to systen it's gone.
How have rooted Lollipop? SuperSU I install from TWRP and tells me that binary super are missing.
Here is the solution, but I dont have su
http://forum.xda-developers.com/nexus-4/help/guide-ultimate-nexus-4-root-guide-t2018179
Click to expand...
Click to collapse
Just Install a Custom Kernel with modified ramdisk. Install Hellscore kernel and then install SuperSU. You will be able to experience Root.
I think unleashed kernel has also been updated with the same, but I can only confirm it with Hellscore.

It's the new bootloader. Flash an older bootloader version, reboot the bootloader, then flash TWRP again and it will stick.

kokotron said:
As I mentioned in my post, I did try to reinstall TWRP. I did it exactly the way you are describing. Still no recovery. The robot icon I'm describing is a common image when something's wrong on an android device and has nothing to do with stock recovery. Thanks a lot for taking the time to post all these info, though!
Click to expand...
Click to collapse
It is weird. I am pretty much sure you're either missing something or using a corrupted img file. Confirm that the file has been downloaded completely by verifying the md5 checksum and I am sure it will mismatch

hp420 said:
It's the new bootloader. Flash an older bootloader version, reboot the bootloader, then flash TWRP again and it will stick.
Click to expand...
Click to collapse
In that case, could it mean that TWRP could probably release an update based on the new bootloader that would solve the issue?

kokotron said:
In that case, could it mean that TWRP could probably release an update based on the new bootloader that would solve the issue?
Click to expand...
Click to collapse
It is not the bootloader, I already achieved that TWRP left there and not deleted, these are the steps to Reproduce.
Download the latest TWRP 2.8.1
restart in bootloader mode
fastboot flash recovery twrp-recover.zip
After the fast boot menu select to boot into recovery and went to boot the TWRP.
Go to Mount ands mount system partition
The go to TWRP file manager and rename the file /system/etc/install-recovery.sh /system/etc/install-recovery.bak
And ready the recovery.
To root I used http://forum.xda-developers.com/nexus-4/orig-development/n4-cf-auto-root-t2025274
Work fine in L.

sidVici0us said:
It is not the bootloader, I already achieved that TWRP left there and not deleted, these are the steps to Reproduce.
Download the latest TWRP 2.8.1
restart in bootloader mode
fastboot flash recovery twrp-recover.zip
After the fast boot menu select to boot into recovery and went to boot the TWRP.
Go to Mount ands mount system partition
The go to TWRP file manager and rename the file /system/etc/install-recovery.sh /system/etc/install-recovery.bak
And ready the recovery.
To root I used http://forum.xda-developers.com/nexus-4/orig-development/n4-cf-auto-root-t2025274
Work fine in L.
Click to expand...
Click to collapse
It is the bootloader. I had the exact same thing happen to me. The only thing I did was flash the last bootloader released before lollipop (30d, i think?) and reflashed twrp, and it stuck. I tried several times reflashing before I rolled back to the legacy bootloader and every time I rebooted the stock recovery was reinstalled. Now you tell me, if the only thing I changed was the bootloader, then reflashed twrp and it worked, how is it not the new bootloader?

sidVici0us said:
It is not the bootloader, I already achieved that TWRP left there and not deleted, these are the steps to Reproduce.
Download the latest TWRP 2.8.1
restart in bootloader mode
fastboot flash recovery twrp-recover.zip
After the fast boot menu select to boot into recovery and went to boot the TWRP.
Go to Mount ands mount system partition
The go to TWRP file manager and rename the file /system/etc/install-recovery.sh /system/etc/install-recovery.bak
And ready the recovery.
To root I used http://forum.xda-developers.com/nexus-4/orig-development/n4-cf-auto-root-t2025274
Work fine in L.
Click to expand...
Click to collapse
Ok thank you, this seems to have worked. When I booted back into Android though root didn't work any more. I re-rooted using your link (which was what I used the first time as well), and I guess I'll know how it goes the next time I reboot the phone.

hp420 said:
It is the bootloader. I had the exact same thing happen to me. The only thing I did was flash the last bootloader released before lollipop (30d, i think?) and reflashed twrp, and it stuck. I tried several times reflashing before I rolled back to the legacy bootloader and every time I rebooted the stock recovery was reinstalled. Now you tell me, if the only thing I changed was the bootloader, then reflashed twrp and it worked, how is it not the new bootloader?
Click to expand...
Click to collapse
Not the boot loader because I have the new bootloader that came with L and TWRP working perfectly, so both can coexist.
The problem comes from within the rom as I said, the file is in /system/etc/install-recovery.sh is responsible to clear the custom recovery and return to default android recovery. The solution is to remove (or rename) that file, what I saw is that the TWRP and SuperSU (both try to) can not rename it, and the solution was to rename it manually from the file manager included in the TWRP (mounting /system as explained before).
The same problem to can not overwrite files (should be modified in any command in library ) prevents install from a flashable zip SuperSU, so the solution http://forum.xda-developers.com/nexu...- root-t2025274 initiating its own operating system booting own image solves the problem that can not be overwritten (or modified) files from the TWRP (at least until a specified version for L see the light).
Probably whoever the new bootloader prevents TWRP modify files in /system, but bootloader not erases the custom recovery. Surely people of TWRP is working to fix this issue (or sleeping sometimes you have to sleep) but the problem can be solved by keeping the new booloader.
Conclucion, I have stock L Last bootloader, root and TWRP everything working perfectly and hellsCore Kernel

sidVici0us said:
Download the latest TWRP 2.8.1
restart in bootloader mode
fastboot flash recovery twrp-recover.zip
After the fast boot menu select to boot into recovery and went to boot the TWRP.
Go to Mount ands mount system partition
The go to TWRP file manager and rename the file /system/etc/install-recovery.sh /system/etc/install-recovery.bak
And ready the recovery.
To root I used http://forum.xda-developers.com/nexus-4/orig-development/n4-cf-auto-root-t2025274
Work fine in L.
Click to expand...
Click to collapse
I did exactly what you just wrote and It worked partially. My TWRP now sticks but I am not able to install supersu. I did install supersu and it was successful but the issue is that when i use root checker it still shows my phone is not rooted and also when i open supersu app it says "supersu binaries are not installed....". Any suggestion?

you installed via the SuperSU binaries from flashable zip in TWRP or use the method http://forum.xda-developers.com/nexus-4/orig-development/n4-cf-auto-root-t2025274 ?
With the CF-auto-root you should have no problems, I did so and I read that many people do so, use this method to root.
On the other hand, I was thinking that having a recovery that can not flash zip is not something useful
---------- Post added at 03:16 PM ---------- Previous post was at 02:52 PM ----------
samvid1992 said:
I did exactly what you just wrote and It worked partially. My TWRP now sticks but I am not able to install supersu. I did install supersu and it was successful but the issue is that when i use root checker it still shows my phone is not rooted and also when i open supersu app it says "supersu binaries are not installed....". Any suggestion?
Click to expand...
Click to collapse
You can not use the superSU flasheable zip, the recovery is not working to modify /system partition, use the other method.

samvid1992 said:
I did exactly what you just wrote and It worked partially. My TWRP now sticks but I am not able to install supersu. I did install supersu and it was successful but the issue is that when i use root checker it still shows my phone is not rooted and also when i open supersu app it says "supersu binaries are not installed....". Any suggestion?
Click to expand...
Click to collapse
CF autoroot works perfectly!! http://www.xda-developers.com/android/chainfire-releases-cf-auto-roots-for-nexus-line/

TWRP bootloop (even after flashing stock through LGUP)

I've decided to unlock bootloader, get a custom recovery and root my new LG G6 H870, so I've downloaded Melina TWRP v321 and Magisk v16.
Unlocking went well, then I downloaded drivers, unlocked debugging, "adb reboot bootloader" -> "fastboot flash recovery twrp.img" -> unplug usb -> boot into twrp by pressing volume down + power (with a tap) -> some weird screen about encryption popped up, but I clicked through -> and then I proceeded to install Magisk straight away, cause this guide said it'd not let TWRP stick if I didn't. After that I tried to boot into system and start the real fun. But it booted me back into TWRP. Again and again.
From there, I've tried Wipe -> Factory Reset, Wipe -> Advanced Wipe -> Repair File System for Data and System, Wipe -> Format Data, Advanced -> Fix Contents, but it all ends with twrp boot... I'm completly lost at this point. I've flashed/rooted a few phones before, but this one... it's a real nightmare.
I've also tried flashing a stock kdz (the filename is "H87011i_00_EEO_GB_OP_0108.kdz" for anyone wondering) through LGUP and redoing this stuff, but I end up with the same result. Please advise how to get it working.

Did you use uppercut when you flashed the kdz file? This is needed to successfully flash back to stock.
Seems it didn't work correctly.

basicreece said:
Did you use uppercut when you flashed the kdz file? This is needed to successfully flash back to stock.
Seems it didn't work correctly.
Click to expand...
Click to collapse
Yes, I did flash through Uppercut (v1).
Since this thread started I flashed it once again, but this time I tried installing official TWRP v321. There was no weird encryption screen, but there were a lot of msgs (when installing magisk or doing a backup, for example) about being unable to unmount /system because it was being used. I did manage to install Magisk though and boot up the phone, but then when I tried installing Xposed, the phone went into another weird loop... but this time, it would get stuck on LG screen and it'd start heating up very fast. It stops heating when I restart using volume down + power into recovery. But I'm once again stuck... this is incredibly annoying, are aall LG phones like that?

How you installing xposed?
Install it via magisk module.
I had no issue.
Unlocked BL
Flashed Zefie TWRP (most stable and backups work)
Flashed fulmics
Flashed Magisk
Wiped cache and dalvik.
Reboot.
Works fine and flashed this over 15 times now no issues ever.

basicreece said:
How you installing xposed?
Install it via magisk module.
I had no issue.
Unlocked BL
Flashed Zefie TWRP (most stable and backups work)
Flashed fulmics
Flashed Magisk
Wiped cache and dalvik.
Reboot.
Works fine and flashed this over 15 times now no issues ever.
Click to expand...
Click to collapse
Did you also have that weird encryption message when flashing Zefie TWRP? Could you be more specific about your way? As in, you wiped cache/dalvik only once or after every flash? Did you wipe anything else? And yeah, I've just downloaded Fulmics and I'm at the installation screen, but I clicked System Information and it says my Storage Size is 5417MB with 104MB free... it reads SDCard Size correctly though. Should I be worried?

Starting from fresh, out the box.
Unlocked bootloader.
Installed Zefie TWRP.
Then added fulmics zip to sdcard.
Flashed zip, followed on screen instructions.
Wiped dalvik and cache.
Rebooted.
Takes a few minutes.
Boots up and done.
Magisk was packed into fulmics when installed.
I do NOT touch xposed. Too many issues plus I need safetynet for Google pay.

Yeah, I pretty much flashed stock firmware back and then followed basicreece instructions, along with flashing Fulmics, but I've got the 'official' Twp (v321). And everything's working so far, but I didn't touch Xposed so far though since Fulmics had pretty much all I wanted from Xposed. Word of advice for future readers though: don't bother staying on stock, too many problems. Fulmics is basically stock, but with some really neat options, and a ton of bugs and problems less.

Can't get custom ROM installed

I'm having a very difficult time getting this phone setup. I can get very, very close... but then it starts boot looping into recovery.
So starting at the beginning, here is what I did:
- Booted up phone, make sure it works and connects to wifi (I find out later that it got encrypted, even though I didn't set a PIN).
- Inside the OS on first boot, I install and use the official bootloader unlock APK from Asus.
- Rebooted into the bootloader and fastboot flashed TWRP.
- Rebooted into TWRP and flashed the Oreo modem, current unofficial Carbon OS 6.1, nano gapps, and magisk 16.6.
- Rebooted and the Carbon ROM logo comes up. It works for about 2-3 minutes, then reboots.
- After many attempts to decrypt (and a lot of help from the forum), I successfully restore the phone to "WW_ZE552KL_14.2020.1712.85_M3.10.47.15_Phone-user.raw.zip" with the Asus tool.
- Phone is fixed and booting again to the OS, but I'm back to square one.
Second attempt:
- Thinking I need to flash the raw Oreo ROM (instead of just the Oreo modem), I use the Asus tool to flash "WW_ZE552KL_15.0410.1803.55_M3.10.47.19_Phone-user.raw.zip"
- The phone works fine and is now an Oreo ROM with an Oreo modem
- It's still unlocked, so I rebooted into the bootloader and fastboot flashed TWRP.
- Rebooted into TWRP and flashed the current unofficial Carbon OS 6.1, nano gapps, and magisk 16.6.
- Rebooted and the Carbon ROM logo comes up. It works for about 2-3 minutes, then reboots.
- After the reboot, it goes to TWRP... whether I just let it boot on its own, or press power when it says: Start - Continue to boot >
What am I doing wrong?

You're having a rough go at this one eh.
I know we talked about this before, but did you try a factory reset and wiping cache/dalvik before rebooting?

Yes. As we discussed before, you can't wipe cache from TWRP. So I'd wipe dalvik from TWRP, then reboot to the bootloader to do a "fastboot format cache".

I'm going to try a different ROM later this afternoon. Maybe that will make a difference.

Flapjack said:
I'm going to try a different ROM later this afternoon. Maybe that will make a difference.
Click to expand...
Click to collapse
Hello! I've been able to boot any ROM by:
1. flashing TWRP
2. rebooting to recovery
3. installing the ROM zip
4. rebooting to bootloader
5. fastboot continue
But when I restart the phone, it always boots to recovery(TWRP), so I have to repeat steps 4 and 5 to boot the ROM, which is
Could you try and tell me if it works for you too?
I'm gonna take a moment to read about the boot process in depth, as it seems there is no straightforward solution to this out there.

junglesnake said:
Hello! I've been able to boot any ROM by:
1. flashing TWRP
2. rebooting to recovery
3. installing the ROM zip
4. rebooting to bootloader
5. fastboot continue
But when I restart the phone, it always boots to recovery(TWRP), so I have to repeat steps 4 and 5 to boot the ROM, which is
Could you try and tell me if it works for you too?
I'm gonna take a moment to read about the boot process in depth, as it seems there is no straightforward solution to this out there.
Click to expand...
Click to collapse
1) Flash Oreo RAW (can be downloaded from @Saktis_STi' s unlocking thread.
2) Boot till system
3) Flash TWRP
4) Flash ROM, Magisk, GApps
5) Reboot
The reason why it reboots to TWRP is because of 'encryption' thingy.

BootloaderBoi said:
1) Flash Oreo RAW (can be downloaded from @Saktis_STi' s unlocking thread.
2) Boot till system
3) Flash TWRP
4) Flash ROM, Magisk, GApps
5) Reboot
The reason why it reboots to TWRP is because of 'encryption' thingy.
Click to expand...
Click to collapse
many many thanks! I was able to get Ressurection Remix working by now
your steps were right, and I will detail them better to tell how I made it work for others reading this thread:
1) Flash Oreo RAW
1.1 - @Saktis_STi's thread is a bit outdated. I downloaded the newest firmware from Asus website.
1.2 - I also had to find a recent recovery.img, which I think I got it from here https://forum.xda-developers.com/zenfone-3/how-to/original-recovery-img-boot-img-zenfone-t3572188
1.3 - I used the stock recovery's adb sideload to flash the stock ROM
2) Flash TWRP - all good here
3) Flash ROM, Magisk, GApps
3.1 - I wiped system, data, cache and dalvik.
3.2 - I flashed RR ROM, GApps and Magisk (EDIT 2: install all three before the first custom ROM boot, or GApps won't work)
3.3 - Performed a Factory Reset
4) REBOOTED TO GLORY!
For what it seems, the stock ROM encryption that is performed on the stock's first boot was the enemy.
Now one last thing... In Security -> Encription, my device is NOT encrypted.
Do I run the risk of ruining everything if I encrypt it?
EDIT: No, it didn't break, working fine

junglesnake said:
1) Flash Oreo RAW
1.1 - @Saktis_STi's thread is a bit outdated. I downloaded the newest firmware from Asus website
Click to expand...
Click to collapse
lmao. His RAW firmware version is the latest version though
https://forum.xda-developers.com/zenfone-3/development/updated-unlock-relock-bootloader-t3749456
Anyways, enjoy your phone running on custom ROM :good:

system keeps flashing stock recovery?

My phone was rooted for the longest time without any problems, but some time ago (I'm assuming after the Treble update) apps would not detect root, although any app that was already using root could continue doing so.
I checked Magisk, which said root was not installed. I booted my phone into recovery, and somehow my phone had the stock recovery flashed on it. I tried flashing TWRP on it again, and it worked. Except, when I rebooted my phone into recovery later again, it went back to stock recovery.
I have no idea what's going on, and would really appreciate some help.
(PS: I do know how to update my phone without the phone reverting to stock recovery, I've done it many times before, so that can't be the problem)

update: I tried flashing TWRP again (through bootloader), and this time I jumped straight to recovery. It showed all the directories as if my phone had just been completely wiped. Internal memory 0M. No files anywhere. Didn't even have a downloads folder.
In a panic, I rebooted my phone, but my phone was actually untouched, no data wipe whatsoever. I'm even more confused about what the hell is happening now.

The stock OOS will automatically reflash the stock recovery if it detects it has changed to something else.
You have to boot into TWRP right after installing it and either let it mount /system read-write (likely to cause problems later) or install something like Magisk that will prevent overwriting the recovery.
TWRP was not able to read your data partition, which can happen depending on which kind of encryption you have. Try the BlueSpark TWRP, it supposedly supports encryption better than the official one.

It's the version. If I use 3.2.3.0 or 3.2.2.0 I get no files. But 3.2.1.1 works for some reason. You can also install pie now. There is a link in the one plus 5 forums here to hydrogen os. It's Chinese version but that doesn't matter. It is in English. You will need to uninstall a few Chinese bloatware apps and flash gapps. But besides that I don't see much difference. If anything the hydrogen os looks nicer. I'll add some screenshots . Developer options was enabled from first boot, with the advanced reboot menu I noticed.

Also, if you have root the TWRP app can flash recovery from in the OS.

Fif_ said:
The stock OOS will automatically reflash the stock recovery if it detects it has changed to something else.
You have to boot into TWRP right after installing it and either let it mount /system read-write (likely to cause problems later) or install something like Magisk that will prevent overwriting the recovery.
TWRP was not able to read your data partition, which can happen depending on which kind of encryption you have. Try the BlueSpark TWRP, it supposedly supports encryption better than the official one.
Click to expand...
Click to collapse
It's frustrating for sure. Lol

After first boot /data mount is gone in TWRP

I've got a SM-G950F, and succesfully flashed TWRP on it.
Wiped /data, after that i flashed dm-verity and force encryption disabler, everything was ok until the first boot into the system.
It booted up, and immediately after that i turned off the phone and booted into TWRP, and for some reason it couldnt mount /data again.
The tutorial i have followed:
Thanks for the tutorial to: jesec
Part 1 - HOW-TO FLASH TWRP:
1. In your ROM, go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
2. Go to Settings -> Developer options and enable OEM Unlock option.
3. Download and Install Samsung Mobile Phones Drivers.
- Option 1: Download and Install Smart Switch for PC.
- Option 2: Download and Install standalone driver package.
4. Download and extract Odin (Samsung's Flash Tool) to your computer.
5. Download a .tar image of TWRP.
6. Reboot your device to download mode.
- Hold [VOLUME DOWN] + [BIXBY] + [POWER] for approx. 15 seconds.
- Read the warning carefully.
- If you agree, press [VOLUME UP] to get into Download mode. If you don't agree, STOP.
7. Open Odin and place that TWRP tar file in the [AP] slot.
8. Connect your phone.
9. Hold [VOLUME UP] + [BIXBY] + [POWER] on your phone and then press start on Odin.
10. Wait for the phone to reboot. DO NOT release [VOLUME UP] + [BIXBY] + [POWER] or you may not reboot into TWRP.
Part 2 - HOW-TO INITIALIZE TWRP: (for new phones)
1. If you completed Part 1 successfully, you should be in TWRP now. At this point, you will reach the screen asking you if you want to allow system modifications.
2. Select "Keep /system RO". (Don't swipe right or you may not be able to boot into system if you failed to complete next steps. However, you can swipe right to allow modifications if you are confident that you can complete next steps.)
3. Go to "Wipe" menu of TWRP and you will find "Format Data". Press "Format Data" and type "yes" to continue.
4. Go to "Reboot" menu and Press "Recovery" to reboot TWRP.
5. Download the latest dm-verity and force encryption disabler zip on your computer.
6. Transfer the zip to your phone.
- Option 1: MTP: Connect your phone with computer and just copy the zip to internal storage. (similar to how you transfer files when in system.)
- Option 2: ADB: Connect your phone with computer and run command "adb push /path/to/zip /sdcard/".
- Option 3: External SD: Copy the zip to an external SD and then insert the card to your phone.
7. Go to "Install" menu of TWRP and flash the zip.
TWRP is initialized and fully functional at this stage. Now you can either reboot into system or root, flash custom ROMs via TWRP.
Part 3 - HOW-TO ROOT:
1. Download the flashable zip.
- Option 1: Magisk
- Option 2: SuperSU (untested)
2. Transfer the zip to your phone.
3. Go to "Install" menu of TWRP and flash the zip.
Part 3a - HOW-TO FLASH CUSTOM ROMS:
1. Download the flashable zip.
2. Transfer the zip to your phone.
3. Go to "Install" menu of TWRP and flash the zip.
Simple.
Click to expand...
Click to collapse
Before the 1st boot i even rooted the device, that remained after the first boot, but no /data mount.
After the 5th try, i gave up.
What could be the problem, or is this normal on this phone?

Are you using latest twrp version 3.2.3.2

I'm using 3.2.1.0

kristof889 said:
I'm using 3.2.1.0
Click to expand...
Click to collapse
Use latest twrp 3.2.3.2 should have data mount and quota issues fixed.
You can flash the .Img file through twrp or flash the .img.tar file with Odin.
After flashing reboot straight into twrp and repeat part 2 of the guide you quoted.
I would be interested to know also if in download mode if you have a line in there saying rmm state?
Twrp for s8 exynos
https://dl.twrp.me/dreamlte/

Installed the 3.2.3.2 version, but nothing has changed. after the first boot into system, TWRP says cant mount /data..
I dont have anything like rmm state in download mode.

kristof889 said:
Installed the 3.2.3.2 version, but nothing has changed. after the first boot into system, TWRP says cant mount /data..
I dont have anything like rmm state in download mode.
Click to expand...
Click to collapse
I am assuming you followed the instructions that you quoted in your first post.(mainly part 2) after flashing twrp
Did you format data in twrp - not wipe - this is needed to decrypt your phone.
Rebooted back into twrp.
Did you flash the no verity opt zip (version 6) - this will disable re encryption of your phone when booting back into system.
This should all be done before booting back into system otherwise your phone will re encrypt itself.

I am assuming you followed the instructions that you quoted in your first post.(mainly part 2) after flashing twrp
Did you format data in twrp - not wipe - this is needed to decrypt your phone.
Rebooted back into twrp.
Did you flash the no verity opt zip (version 6) - this will disable re encryption of your phone when booting back into system.
This should all be done before booting back into system otherwise your phone will re encrypt itself.
Click to expand...
Click to collapse
I formatted data, not just wiped it.
I have installed the no verity opt, the latest version.
Even after these, my phone reencrypted itself.

kristof889 said:
I formatted data, not just wiped it.
I have installed the no verity opt, the latest version.
Even after these, my phone reencrypted itself.
Click to expand...
Click to collapse
When do the errors occur ie: during backup,restore,flashing something.
When first starting twrp did you swipe to allow modifications or did you leave it as read only.

You mean, the data mount error?
If yes, immediately after the 2nd boot into TWRP, after the first boot into system. Before i do anything in twrp, i check the log (with the button on the lower right) and it creates a bunch of errors, all in contact with the data partition.
So i can even do a proper backup.
If i flash any zip, upon the next boot into system it says something like verify failed, cannot reboot your phone and it gives a button wich used to restore the phone from recovery, but now i cant even do that bcoz it cant mount /data and thus can restore the phone.

kristof889 said:
You mean, the data mount error?
If yes, immediately after the 2nd boot into TWRP, after the first boot into system. Before i do anything in twrp, i check the log (with the button on the lower right) and it creates a bunch of errors, all in contact with the data partition.
So i can even do a proper backup.
If i flash any zip, upon the next boot into system it says something like verify failed, cannot reboot your phone and it gives a button wich used to restore the phone from recovery, but now i cant even do that bcoz it cant mount /data and thus can restore the phone.
Click to expand...
Click to collapse
Still sounds like you device is still encrypted.
Doing a factory reset with twrp should work to restore your phone or at worst you can re-flash your firmware.
If you can in twrp FORMAT data again and flash the no verity zip use version 6 zip file
https://build.nethunter.com/android-tools/no-verity-opt-encrypt/
I would be curious to know in twrp in the mount menu what options are ticked as well.

After the fresh flash, it was not encrypted because i could access the internal storage, and data was mounted.
Now in TWRP system(read only), cache and dalvik is mounted, and internal storage says 0MB

kristof889 said:
After the fresh flash, it was not encrypted because i could access the internal storage, and data was mounted.
Now in TWRP system(read only), cache and dalvik is mounted, and internal storage says 0MB
Click to expand...
Click to collapse
What Android version are you on?
When you flashed twrp it should have asked you whether or not to ' swipe to allow modifications ' did you swipe to allow or not.
In the mount menu of twrp I have ticked/checked data,cache,SD card the option at the bottom to allow read only I have ticked - this does not stop me from doing backups but does stop me from restoring (data mount error ) so you can leave it unticked.
I would.like to know your steps for twrp installation (not the one you quoted in first post) as I screwed up when I first tried.

I attached the software information bellow.
I have not swiped to allow for system modifications

First steps were the followimg:
Install .tra with odin
Immediately reboot to twrp
No swipe for system modifications
Format data
Flash no dm verity v6
(Flash magisk)
Reboot to system

kristof889 said:
First steps were the followimg:
Install .tra with odin
Immediately reboot to twrp
No swipe for system modifications
Format data
Flash no dm verity v6
(Flash magisk)
Reboot to system
Click to expand...
Click to collapse
Ok basically you have missed a step as far as I can see
(When I did mine I did swipe to allow modifications )
After you have formated data you will need to reboot back into twrp ( use reboot menu in twrp )
Then flash the no verity zip and magisk
If using magisk I would try the latest version 18 it's working ok for me.
Then boot into system to see if everything ok
Then reboot into twrp and see if the data mount issue is fixed.

spawnlives said:
Ok basically you have missed a step as far as I can see
(When I did mine I did swipe to allow modifications )
After you have formated data you will need to reboot back into twrp ( use reboot menu in twrp )
Then flash the no verity zip and magisk
If using magisk I would try the latest version 18 it's working ok for me.
Then boot into system to see if everything ok
Then reboot into twrp and see if the data mount issue is fixed.
Click to expand...
Click to collapse
Thank you for your advice. I will try it in the following days and will post the result.

I fixed this by flashing Renovate ICE's ROM and selecting the TWRP included in the AROMA installer.
Can access storage on TWRP now with no issues.

CoreyOS said:
I fixed this by flashing Renovate ICE's ROM and selecting the TWRP included in the AROMA installer.
Can access storage on TWRP now with no issues.
Click to expand...
Click to collapse
But i want to use the stock rom.
Maybe if i flash Renovate rom and after that again the stock?

kristof889 said:
But i want to use the stock rom.
Maybe if i flash Renovate rom and after that again the stock?
Click to expand...
Click to collapse
Why stock???
It pretty much is stock, just you have full control over the apps preinstalled and you can change colours of various UI elements.
It's just easier to flash a zip than it is to flash via ODIN, then flash TWRP and keep trying over and over to get this result when I know this rom works fine with CTSprofile.
You will only need to flash TWRP once and copy the rom to your phone.
The rest is magic (AROMA)
I haven't really had to mess with anything and have just installed and used the HSBC banking app as if it were an official phone. (ROOTED and custom ROM and Recovery)
One extra step you could take is to use Magisk hide and point it to the app you want to hide root from.

CoreyOS said:
Why stock???
It pretty much is stock, just you have full control over the apps preinstalled and you can change colours of various UI elements.
It's just easier to flash a zip than it is to flash via ODIN, then flash TWRP and keep trying over and over to get this result when I know this rom works fine with CTSprofile.
You will only need to flash TWRP once and copy the rom to your phone.
The rest is magic (AROMA)
I haven't really had to mess with anything and have just installed and used the HSBC banking app as if it were an official phone. (ROOTED and custom ROM and Recovery)
One extra step you could take is to use Magisk hide and point it to the app you want to hide root from.
Click to expand...
Click to collapse
So on that rom i can use s health and all knox based apps like normal?
If yes, i will try it, it looks very nice