Is there any way to update to android 7.0 emui 5 from stock marshmallow without deleting data?
sirjumpsalot said:
Is there any way to update to android 7.0 emui 5 from stock marshmallow without deleting data?
Click to expand...
Click to collapse
if you already have bootloader unlocked is ok.
if not, after unlock will be a factory reset...
gtdaniel said:
if you already have bootloader unlocked is ok.
if not, after unlock will be a factory reset...
Click to expand...
Click to collapse
My bootloader is unlocked,rooted and twrp installed.I have VNS-L31C432B160.So first,I have to unroot,and then install nougat via proxy method or flash via twrp? After that I dont have to factory reset? Or do I?
sirjumpsalot said:
My bootloader is unlocked,rooted and twrp installed.I have VNS-L31C432B160.So first,I have to unroot,and then install nougat via proxy method or flash via twrp? After that I dont have to factory reset? Or do I?
Click to expand...
Click to collapse
What i do:
1. Unlock bootloader folowing by Automatic Factory Reset. - already done by you
2. Flash TWRP - already done by you
3. From TWRP flash Meticulus TWRP
4. Reboot to TWRP and flash update.zip and update_data_full_VNS-L31_hw_eu.zip, both flash ends with errors, without reboot between flashes.
5. After that, reboot device and boot in system ok, start configuration, etc.
6. Reboot to fastboot and flash Nougat Recovery reworked by @BadWolfYe
gtdaniel said:
What i do:
1. Unlock bootloader folowing by Automatic Factory Reset. - already done by you
2. Flash TWRP - already done by you
3. From TWRP flash Meticulus TWRP
4. Reboot to TWRP and flash update.zip and update_data_full_VNS-L31_hw_eu.zip, both flash ends with errors, without reboot between flashes.
5. After that, reboot device and boot in system ok, start configuration, etc.
6. Reboot to fastboot and flash Nougat Recovery reworked by @BadWolfYe
Click to expand...
Click to collapse
Thank you so much Will do it right now.About the 6th step,the Nougat Recovery one,that is optional right?
sirjumpsalot said:
Thank you so much Will do it right now.About the 6th step,the Nougat Recovery one,that is optional right?
Click to expand...
Click to collapse
I do not called optional, because in Nougat you do not have recovery...
gtdaniel said:
if you already have bootloader unlocked is ok.
if not, after unlock will be a factory reset...
Click to expand...
Click to collapse
But when I unlock the bootloader, I do not lose my data.
I type the code, when I validate on the phone, (1: volume +, then 2: power to validate). It must go quickly.
I press down on volume and power to return to fastboot mode and then install twrpMM, reboot.
At restart, there is all my data.
Then install the two files nougat, reboot, there is always my data.
Chisetdel31260 said:
But when I unlock the bootloader, I do not lose my data.
I type the code, when I validate on the phone, (1: volume +, then 2: power to validate). It must go quickly.
I press down on volume and power to return to fastboot mode and then install twrpMM, reboot.
At restart, there is all my data.
Then install the two files nougat, reboot, there is always my data.
Click to expand...
Click to collapse
Yeap, is very tricky...
From 4-5 times i succeeded 2 times...
gtdaniel said:
Yeap, is very tricky...
From 4-5 times i succeeded 2 times...
Click to expand...
Click to collapse
Just forget fastboot reboot forever.
Related
Okay, so :- :crying::crying::crying::crying:
I was on nougat and went to downgrade and followed ALL instruction apart from one - which was something I missed with translate until i visited the htc page for the tenth time trying to fix this.
:silly: :crying: ----- I didnt change default location whilst running nougat -----:silly: :crying:
I flashed the c432 oem file, and I have tried to update to b151, b150 and b161 all through the update.app method. to no avail.
I have tried flashing everything manually through adb pushing AND fastboot after using the extractor and everything works EXCEPT the system.img. I am faced with an error telling me it has failed, 'unable to mount /system' - - - This message comes through regardless of what I do and im panicking
PLEASE HELP I AM SO STUCK
thank you in advance for any suppport
What P9 lite you have?
Johnny TDN said:
What P9 lite you have?
Click to expand...
Click to collapse
I have the vns-L31 however ive just opened dc unlocker and its showing my model as 21
i can access fastboot and rescue mode as well as twrp although when flashing im faced with the /system error
It is written, on htcmania, using c432oeminfo and b130.
so,
Code bootloader
Twrp meticulus.
Install c432oeminfo.zip, power off
Restart dload c432b130.
Chisetdel31260 said:
It is written, on htcmania, using c432oeminfo and b130.
so,
Code bootloader
Twrp meticulus.
Install c432oeminfo.zip, power off
Restart dload c432b130.
Click to expand...
Click to collapse
i will try that, although ill get errors when flashing the zip - not only that but I cant get to meticulus once its flashed - possibly the system error?
Restart, bootloader code,
Twrp Meticulous, went a wipe, xxxx everything except external storage, installs c432oeminfo.zip, dload c432b130.
http://www.htcmania.com/showthread.php?t=1265458
Chisetdel31260 said:
Restart, bootloader code,
Twrp Meticulous, went a wipe, xxxx everything except external storage, installs c432oeminfo.zip, dload c432b130.
http://www.htcmania.com/showthread.php?t=1265458
Click to expand...
Click to collapse
what do you mean when you say code bootloader? what should i do there? anything im missing?
raihanbam said:
what do you mean when you say code bootloader? what should i do there? anything im missing?
Click to expand...
Click to collapse
Yes, I noticed that from time to time, in bootloader mode, it is written unlocked, but as the device bootloop (bug) I believe it too. so
I retype systematically the bootloader code to open.
raihanbam said:
what do you mean when you say code bootloader? what should i do there? anything im missing?
Click to expand...
Click to collapse
If you have your bootloader unlocked (if you don,t have it, unlock it) and flash TWRP. After that, flash B130 for your VNS-L31. Done.
Unlock yor Bootloader again. And try flashing again.
Have hade the same problem. My bootloader showed unlocked, but he was not.
Ron
raihanbam said:
what do you mean when you say code bootloader? what should i do there? anything im missing?
Click to expand...
Click to collapse
i have followed all of these and notw its stuck on your device is booting.....
i flashed the rom with recovery so now ill try the dload method again, i assume ill have to flash the second zip with recovery?
Chisetdel31260 said:
Restart, bootloader code,
Twrp Meticulous, went a wipe, xxxx everything except external storage, installs c432oeminfo.zip, dload c432b130.
http://www.htcmania.com/showthread.php?t=1265458
Click to expand...
Click to collapse
i am now stuck with your device is booting - cant access fastboot or recovery at all - doesnt show up in adb or fastboot either
raihanbam said:
i am now stuck with your device is booting - cant access fastboot or recovery at all - doesnt show up in adb or fastboot either
Click to expand...
Click to collapse
Shut down your device. Press the switch off for 10 secounds.
When the phone is off, swith on and same time with vol + without usb-kabel, and otherwise try it with usb-kabel.
When you stock recovery starts. You can try a factoryreset.
When you Revolution recovery starts flash oem.info again and perform the dload methode with your right MM UPDATE.APP.
Ron
RonPo said:
Shut down your device. Press the switch off for 10 secounds.
When the phone is off, swith on and same time with vol + without usb-kabel, and otherwise try it with usb-kabel.
When you stock recovery starts. You can try a factoryreset.
When you Revolution recovery starts flash oem.info again and perform the dload methode with your right MM UPDATE.APP.
Ron
Click to expand...
Click to collapse
no matter what I do I'm stuck with the device is booting screen I even let the battery drain to try that way-I'm so screwed
RonPo said:
Shut down your device. Press the switch off for 10 secounds.
When the phone is off, swith on and same time with vol + without usb-kabel, and otherwise try it with usb-kabel.
When you stock recovery starts. You can try a factoryreset.
When you Revolution recovery starts flash oem.info again and perform the dload methode with your right MM UPDATE.APP.
Ron
Click to expand...
Click to collapse
no matter what I do I'm stuck with the device is booting screen I even let the battery drain to try that way-I'm so screwed
RonPo said:
Shut down your device. Press the switch off for 10 secounds.
When the phone is off, swith on and same time with vol + without usb-kabel, and otherwise try it with usb-kabel.
When you stock recovery starts. You can try a factoryreset.
When you Revolution recovery starts flash oem.info again and perform the dload methode with your right MM UPDATE.APP.
Ron
Click to expand...
Click to collapse
okay so I got to the erecovery screen, it only gives the option to dl the latest version and fails along with reboot and shutdown - no wipe
raihanbam said:
okay so I got to the erecovery screen, it only gives the option to dl the latest version and fails along with reboot and shutdown - no wipe
Click to expand...
Click to collapse
OK. Go to bootloader and flash:
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash system system.img
extract this files with: Huawei Update Extractor from your Original UPDATE.APP
system.img is loading in steps and need much time.
Ron
Hi guys, i have the same problem after doing some ****, flashed stock rom from lineageos 14 and a lot of things that i'm trying now to unbrick my phone... i cant enter to the erecovery with the 3 buttons method, wathever i do, and i dont have any idea on how to unbrick my phone... I hope someone could help me
i upgraded my p9 lite to nougat via unofficial method using firmware finder app and when it finshed i found many apps not exist anymore
and the build number bwcame nrd 90m test-keys
now i want to back to marshmallow but i can not i tried every possiple method but i still cant
i unlocked the boatloader but cannt install twrp
can anyone help me please
Did you try the revolution twrp for nougat? You should flash that one, install the oemfile and dload a marshmallow file, after that go into recovery and hard reset your phone. This should get you back to marshmallow.
Or not to go down to MM. If you are always in nougat, But installs HWdataFull that suits you.
Install recoverynougat b9, MOUNT data, install HwDataFull, reboot bootloader, install recovery stock nougat. Reboot recovery and factory rest. Reboot.
Kodalinium said:
Did you try the revolution twrp for nougat? You should flash that one, install the oemfile and dload a marshmallow file, after that go into recovery and hard reset your phone. This should get you back to marshmallow.
Click to expand...
Click to collapse
thanks for reply but i cant install the revolution twrp for nougat when i instsll it it says remote: command not allowed
Chisetdel31260 said:
Or not to go down to MM. If you are always in nougat, But installs HWdataFull that suits you.
Install recoverynougat b9, MOUNT data, install HwDataFull, reboot bootloader, install recovery stock nougat. Reboot recovery and factory rest. Reboot.
Click to expand...
Click to collapse
i cant install the recovery this is the problem
anamedo7mdy said:
i cant install the recovery this is the problem
Click to expand...
Click to collapse
What recovery twrp installed you?
What version vns-Lxxcxxxbxxx have you?
Which nougat version you installed cxxxB33X?
Have you still nougat installed?
Chisetdel31260 said:
What recovery twrp installed you?
What version vns-Lxxcxxxbxxx have you?
Which nougat version you installed cxxxB33X?
Have you still nougat installed?
Click to expand...
Click to collapse
the recovery i tryed is Revolution Recovery Android Nougat {15-12-16} Beta .9
vns-l31
build number:nrd 90m test-keys
nougat version i installed was c02bxxx it was via ota
i still nougat instslled and want to roll back to marshmallow or install another complete nougat
anamedo7mdy said:
the recovery i tryed is Revolution Recovery Android Nougat {15-12-16} Beta .9
vns-l31
build number:nrd 90m test-keys
nougat version i installed was c02bxxx it was via ota
i still nougat instslled and want to roll back to marshmallow or install another complete nougat
Click to expand...
Click to collapse
How did you install OTA ?
You have installed L31c02b327, with firmware finder.
Fastboot works?
Kcetin20 said:
How did you install OTA ?
Click to expand...
Click to collapse
i used app called firmware finder and i changed the proxy in the network to local host and the port to 8080 then the app send the update to ota and i download it and run it
Chisetdel31260 said:
You have installed L31c02b327, with firmware finder.
Fastboot works?
Click to expand...
Click to collapse
yes it works
anamedo7mdy said:
yes it works
Click to expand...
Click to collapse
Your phone starts on nougat, go to setup, allow debugging usb, and verify that unlocking oem is enabled.
Lite adb and fastboot to pc and write fastboot flash recovery recovery.img
Connected to the usb cable.
Hisuite will start, do not close it, reduce it.
On phone supported volume - and power, it will go to fastboot mode.
To the pc click ok. Do not fastboot reboot.
Unplugged the cable and pressed volume + and power, the Huawei logo does not lose volume + only power as you lose it.
Chisetdel31260 said:
Your phone starts on nougat, go to setup, allow debugging usb, and verify that unlocking oem is enabled.
Lite adb and fastboot to pc and write fastboot flash recovery recovery.img
Connected to the usb cable.
Hisuite will start, do not close it, reduce it.
On phone supported volume - and power, it will go to fastboot mode.
To the pc click ok. Do not fastboot reboot.
Unplugged the cable and pressed volume + and power, the Huawei logo does not lose volume + only power as you lose it.[/QUOT]
cant enable oem unlocking
Click to expand...
Click to collapse
Chisetdel31260 said:
Your phone starts on nougat, go to setup, allow debugging usb, and verify that unlocking oem is enabled.
Lite adb and fastboot to pc and write fastboot flash recovery recovery.img
Connected to the usb cable.
Hisuite will start, do not close it, reduce it.
On phone supported volume - and power, it will go to fastboot mode.
To the pc click ok. Do not fastboot reboot.
Unplugged the cable and pressed volume + and power, the Huawei logo does not lose volume + only power as you lose it.
Click to expand...
Click to collapse
cant enable oem unlock
https://forum.xda-developers.com/attachment.php?attachmentid=4041632&stc=1&d=1487113827
ROLLBACK
Chisetdel31260 said:
You can not go a option developers?
Do you have the bootloader code?
Click to expand...
Click to collapse
i can go developer options but cannot enable oem
yes i have the code
https://forum.xda-developers.com/attachment.php?attachmentid=4041635&stc=1&d=1487114260
anamedo7mdy said:
i can go developer options but cannot enable oem
yes i have the code
https://forum.xda-developers.com/attachment.php?attachmentid=4041635&stc=1&d=1487114260
Click to expand...
Click to collapse
http://m.huawei.com/frmobile/consumer/support/downloads/index.htm
ROOLBACK VNS-l31 Dload
http://download-c.huawei.com/download/downloadCenter?downloadId=93786&version=373420&siteCode=fr
and
dload firmware full c432b160
loock l31c02 no full firmware just ota http://hwmt.ru/hwmtsite/firmware-database/?firmware_model=vns-l31c02&firmware_page=0
Chisetdel31260 said:
http://m.huawei.com/frmobile/consumer/support/downloads/index.htm
ROOLBACK VNS-l31 Dload
http://download-c.huawei.com/download/downloadCenter?downloadId=93786&version=373420&siteCode=fr
and
dload firmware full c432b160
loock l31c02 no full firmware just ota http://hwmt.ru/hwmtsite/firmware-database/?firmware_model=vns-l31c02&firmware_page=0
Click to expand...
Click to collapse
when i roolback it stuck on 5% and cant complete
anamedo7mdy said:
i used app called firmware finder and i changed the proxy in the network to local host and the port to 8080 then the app send the update to ota and i download it and run it
Click to expand...
Click to collapse
I can't find the local host and port in the app in my phone....isn't it on firmware finder ? or somewhere else ?
I have huawei p8 lite dual sim android 6 marshallow and i tried all tools to root it but failed.Finally i tried to install twrp.I unlock the bootloader and with adb i wrote adb reboot bootloader,fastboot devices,fastboot flash recovery recovery.img and fastboot reboot but twrp didn't saved.When i boot to recovery the stock recovery was still there..What i have to do?
nikriga said:
I have huawei p8 lite dual sim android 6 marshallow and i tried all tools to root it but failed.Finally i tried to install twrp.I unlock the bootloader and with adb i wrote adb reboot bootloader,fastboot devices,fastboot flash recovery recovery.img and fastboot reboot but twrp didn't saved.When i boot to recovery the stock recovery was still there..What i have to do?
Click to expand...
Click to collapse
Did fastboot gave some error message, also did you only test to go to recovery straight from fastboot, because that is other recovery which can't be changed.
keikari said:
Did fastboot gave some error message, also did you only test to go to recovery straight from fastboot, because that is other recovery which can't be changed.
Click to expand...
Click to collapse
Fastboot didnt gave me error and i tried to go recovery from fastboot without reboot and i tried recovery with reboot.i cant understand whats going on made it all correct
nikriga said:
Fastboot didnt gave me error and i tried to go recovery from fastboot without reboot and i tried recovery with reboot.i cant understand whats going on made it all correct
Click to expand...
Click to collapse
Just to make sure because the recovery stuff with this device can be at start a bit confusing. Please check does the recovery you boot into have factory reset option in it.
Also can you give a link for the twrp you flashed?
keikari said:
Just to make sure because the recovery stuff with this device can be at start a bit confusing. Please check does the recovery you boot into have factory reset option in it.
Also can you give a link for the twrp you flashed?
Click to expand...
Click to collapse
I tried a lot of versions of twrp from forum here for p8 lite.Today i tried 3.0.2.I cant select factory reset because the phone crashed because the bootloader is unlocked i think.But if you think that the phone has to be in factory reset i will relock bootloader.Another question.If i downgrade firmware to android 5.0 tools such king root will be success?I have firmware from my county greece.If i choose android 5 firmware from other country i will have problem?
nikriga said:
I tried a lot of versions of twrp from forum here for p8 lite.Today i tried 3.0.2.I cant select factory reset because the phone crashed because the bootloader is unlocked i think.But if you think that the phone has to be in factory reset i will relock bootloader.Another question.If i downgrade firmware to android 5.0 tools such king root will be success?I have firmware from my county greece.If i choose android 5 firmware from other country i will have problem?
Click to expand...
Click to collapse
1. Booloader unlocking only affects to what you can flash in fastboot, it doesn't affect stock recovery funtionality.
I asked about factory reset option, because I wanted to make sure you aren't booting to "recovery2/eRecovery". (It doesn't have factory reset option)
2. Avoid using kingoroot and other oneclick root apps if it is possible.
3. Your firmware version doesn't matter.
4. Bootloader unlocking can't cause crash. Locked bootloader could cause crash if system is modified(I think), but you would still be able to get recovery.
One way to make sure you boot to normal recovery is to connect your phone to pc --> open command line --> type "adb reboot recovery". This won't take you to erecovery
I can't do any better help with the current information.
After you successfully flash the recovery with fastboot (always use the latest!) You need to do these things in order (and fast) in order to but to TWRP. If you don't it will boot to stock recovery and you have to fastboot flash again.
You must
a) write fastboot reboot in the console but don't pass Enter!!
b) hold VOLUME UP
c) (still holding VOL UP) presss Enter and remove the USB cable immediately once it says your device is booting now.
Keep holding VOL UP until you boot to TWRP. Allow modifications.
For root you will flash Magisk (you know, normal zip), which a) is open source, so no sneaky stuff and b) can hide root from apps as a bonus. You can always get the zip here: http://tiny.cc/latestmagisk
Important: If you have other root solutions install them for example SuperSU has an uninstall option. Then flash Magisk
JpegXguy said:
After you successfully flash the recovery with fastboot (always use the latest!) You need to do these things in order (and fast) in order to but to TWRP. If you don't it will boot to stock recovery and you have to fastboot flash again.
You must
a) write fastboot reboot in the console but don't pass Enter!!
b) hold VOLUME UP
c) (still holding VOL UP) presss Enter and remove the USB cable immediately once it says your device is booting now.
Keep holding VOL UP until you boot to TWRP. Allow modifications.
For root you will flash Magisk (you know, normal zip), which a) is open source, so no sneaky stuff and b) can hide root from apps as a bonus. You can always get the zip here: http://tiny.cc/latestmagisk
Important: If you have other root solutions install them for example SuperSU has an uninstall option. Then flash Magisk
Click to expand...
Click to collapse
The recovery you go from fastboot is eRecovery. You can't boot to stock or TWRP recovery directly from fastboot. If you choose shutdown from eRecovery then you can just go to TWRP with normal way (power + VOL UP). Going to eRecovery doesn't undo TWRP installation. (This also means you can do force update even with TWRP installed, I think, not 100% sure)
keikari said:
The recovery you go from fastboot is eRecovery. You can't boot to stock or TWRP recovery directly from fastboot. If you choose shutdown from eRecovery then you can just go to TWRP with normal way (power + VOL UP). Going to eRecovery doesn't undo TWRP installation. (This also means you can do force update even with TWRP installed, I think, not 100% sure)
Click to expand...
Click to collapse
I do this every time. See surdu's post here. Fastboot reboo is just a reboot, so the familiar key combo will boot to recovery.
JpegXguy said:
I do this every time. See surdu's post here. Fastboot reboo is just a reboot, so the familiar key combo will boot to recovery.
Click to expand...
Click to collapse
I just wanted to point out that you don't need to re-flash if you happen to only press vol up in fastboot.
I want to root my moto g4 plus(unlocked bootloader and twrp flashed). Anyone knows how to root moto g4 plus. And i also want to know that how to increase battery backup after rooting(is it a myth).
@ADITYA_KUMAR this has been asked and explained many times and once more.
- Take Backup
- get Elemental-X kernel (see development section and download correct one )
- flash with TWRP
- get latest SuperSU : SuperSU
- now you can follow same guide of MM from step 5 : Guide
Don't Forget to Take Backup..
____Mdd said:
@ADITYA_KUMAR this has been asked and explained many times and once more.
- Take Backup
- get Elemental-X kernel (see development section and download correct one )
- flash with TWRP
- get latest SuperSU : SuperSU
- now you can follow same guide of MM from step 5 : Guide
Don't Forget to Take Backup..
Click to expand...
Click to collapse
How to take backup and restore it. I flashed twrp image. Before rebooting twrp works fine. But after rebooting i am not able to open twrp. I think it got removed.
ADITYA_KUMAR said:
How to take backup and restore it. I flashed twrp image. Before rebooting twrp works fine. But after rebooting i am not able to open twrp. I think it got removed.
Click to expand...
Click to collapse
What happens if you select Recovery from Bootloader ? Is it booting in Stock Recovery ?
In TWRP go to Backup and make backup of /system /data /boot.
If anything bad happens while flashing/Rooting then you can restore it.
The first time, you must open TWRP from the bootloader directly or the recovery gets overwritten.
For rooting, you can flash Magisk instead of flashing SuperSu. Other steps remain exactly the same.
____Mdd said:
What happens if you select Recovery from Bootloader ? Is it booting in Stock Recovery ?
In TWRP go to Backup and make backup of /system /data /boot.
If anything bad happens while flashing/Rooting then you can restore it.
Click to expand...
Click to collapse
When i booted into recovery mode. It shows no command.
ADITYA_KUMAR said:
When i booted into recovery mode. It shows no command.
Click to expand...
Click to collapse
That's stock Recovery, you need to flash TWRP again.
____Mdd said:
That's stock Recovery, you need to flash TWRP again.
Click to expand...
Click to collapse
I flashed twrp 2 times. But every time i restarted my phone it removed automatically.
ADITYA_KUMAR said:
I flashed twrp 2 times. But every time i restarted my phone it removed automatically.
Click to expand...
Click to collapse
Did you flashed TWRP and with the next command booted immediately into twrp?
strongst said:
Did you flashed TWRP and with the next command booted immediately into twrp?
Click to expand...
Click to collapse
Commands used:
Fastboot flash recovery name.img
It gives output as image not signed or corrupt.
After that i typed command fastboot reboot bootloader.
I open recovery mode. It opens twrp. But after i restart my phone. It automatically removes the twrp.
ADITYA_KUMAR said:
Commands used:
Fastboot flash recovery name.img
It gives output as image not signed or corrupt.
After that i typed command fastboot reboot bootloader.
I open recovery mode. It opens twrp. But after i restart my phone. It automatically removes the twrp.
Click to expand...
Click to collapse
This is your problem. You must open recovery from the bootloader menu the very first time. Or TWRP is overwritten with stock recovery. I don't know why that is. But that is how it is...
baunthiyal said:
This is your problem. You must open recovery from the bootloader menu the very first time. Or TWRP is overwritten with stock recovery. I don't know why that is. But that is how it is...
Click to expand...
Click to collapse
It means that i don't have to run the fasboot reboot bootloader command and after finishing the flashing i have to open the recovery mode directly?
Yes
ADITYA_KUMAR said:
It means that i don't have to run the fasboot reboot bootloader command and after finishing the flashing i have to open the recovery mode directly?
Click to expand...
Click to collapse
Reboot into bootloader.
Flash recovery - fastboot flash recovery twrp-xxx.img
Open recovery from bootloader menu (by using the volume and power buttons)
From there you can reboot and your recovery will work normally after this, most probably.
baunthiyal said:
Reboot into bootloader.
Flash recovery - fastboot flash recovery twrp-xxx.img
Open recovery from bootloader menu (by using the volume and power buttons)
From there you can reboot and your recovery will work normally after this, most probably.
Click to expand...
Click to collapse
I need to root my stock nougat( june version).What should i do after that.
I'll tell you what I did.
1. Flash Elemental Ex kernel. https://forum.xda-developers.com/moto-g4-plus/development/kernel-elementalx-g4-0-01-t3424836
2. Flash Magisk. https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
baunthiyal said:
Reboot into bootloader.
Flash recovery - fastboot flash recovery twrp-xxx.img
Open recovery from bootloader menu (by using the volume and power buttons)
From there you can reboot and your recovery will work normally after this, most probably.
Click to expand...
Click to collapse
It didn't work. I flashed twrp. I opened recovery mode by using volume down to scroll to recovery mode and power button to select it. I booted in twrp mode and rebooted system from there. After that i power off my phone and tried to open twrp again, but it is showing no commands only. I didn't boot into twrp again.
ADITYA_KUMAR said:
It didn't work. I flashed twrp. I opened recovery mode by using volume down to scroll to recovery mode and power button to select it. I booted in twrp mode and rebooted system from there. After that i power off my phone and tried to open twrp again, but it is showing no commands only. I didn't boot into twrp again.
Click to expand...
Click to collapse
Try commands,
fastboot oem fb_mode_set
fastboot flash recovery name.img
Fastboot oem fb_mode_clear
Then directly boot into recovery,
Then again boot into recovery through twrp itself (there is option for it in reboot) or try anything.
Thank you guys i successfully rooted my moto g4 plus(xt1643)
Hi
Have an unrooted international version of OnePlus6t. decided to upgrade from 9.0.17 to 10.0.1 and root. Decided to follow [Ultimate-Guide] ★ OnePlus 6T OOS-10 TWRP-Root-Magisk from OOS-9 guide, Method 3.
Installed 10.0.1 , phone booted OK,
restarted to bootloader
Stock Recovery >> "Wipe data and cache" > "Erase everything" > Reboot to Bootloader
fastboot flash boot .\twrp-3.3.1-28-fajita-Q-mauronofrio.img
Changed to Slot B
reboot to recovery
Stock Recovery >> "Wipe data and cache" > "Erase everything" > Reboot to Bootloader
fastboot flash boot .\twrp-3.3.1-28-fajita-Q-mauronofrio.img
Now phone is just showing "The bootloader is unlocked and software integrity cannot be guaranteed blah blah blah' screen. What can i do?
Please advise
Thanks in advance
P.S. Power+VolumeUp buttons combination just turns phone off. When I turn it on again, phone stucks on the same screen
UPD: OK I am able to get into fastboot mode. What can be done next?
UPD 2: Using mauronofrio's AllInOne tool I was able to boot twrp for Pie, change slot back to A and voila! I have TWRP and Andriod 10.0.1 back again. Hooray!
Now the only thing that bothers me is that seems that I have Q on SlotA and Pie on SlotB. Can it cause any unwanted effects?
How did you force getting into bootloader please? I'm in same boat!
Well the first thing is that you can't flash twrp as a boot partition. Twrp is a recovery, not a kernel. You are supposed to to fastboot boot twrp
557953 said:
How did you force getting into bootloader please? I'm in same boat!
Click to expand...
Click to collapse
Disconnect phone from computer, press VoulmeUp+Power keys together to turn off the phone, then press VolumeDown+Power keys to get into bootloader
You erased everything? I guess you have to flash your image again (10.0.1). Just don't use twrp if you don't need it. Go back to stock recovery, install 10.0.1. let it boot. Then after everything is done, flash the patched boot.img (install magisk manager first though).
bokkoman said:
You erased everything? I guess you have to flash your image again (10.0.1). Just don't use twrp if you don't need it. Go back to stock recovery, install 10.0.1. let it boot. Then after everything is done, flash the patched boot.img (install magisk manager first though).
Click to expand...
Click to collapse
I already did that and my phone is working now with OOS 10.0.1. I wonder should i get to TWRP somehow, change to SlotB and flash stock 10.0.1 again?
BesoC said:
I already did that and my phone is working now with OOS 10.0.1. I wonder should i get to TWRP somehow, change to SlotB and flash stock 10.0.1 again?
Click to expand...
Click to collapse
Why do you need TWRP?
Same issue caused by same process. Not able to get into bootloader screen using the method described. Ugh
Luckily I still have my last phone I can use until I figure this out. Yay Nexus 5X!
Same boat...
g90814 said:
Same issue caused by same process. Not able to get into bootloader screen using the method described. Ugh
Luckily I still have my last phone I can use until I figure this out. Yay Nexus 5X!
Click to expand...
Click to collapse
...I was able to get into bootloader (fastboot mode?) by holding Vol up & down as well as power button (all three depressed together) for about 15 seconds
entered -
fastboot flash boot twrp-3.3.1-28-fajita-Q-mauronofrio.img
at least I have a recovery now...in slot A
bokkoman said:
Why do you need TWRP?
Click to expand...
Click to collapse
Just to flush stock 10.0.1 to SlotB
g90814 said:
Same issue caused by same process. Not able to get into bootloader screen using the method described. Ugh
Luckily I still have my last phone I can use until I figure this out. Yay Nexus 5X!
Click to expand...
Click to collapse
Did you turned off your phone? You should hold VolUp+Power buttons until phone turns off - about 10-15 seconds. Then Press VolDown+Power to get into bootloader
BesoC said:
Just to flush stock 10.0.1 to SlotB
Click to expand...
Click to collapse
You don't need TWRP for that. If you only want root with stock oxygenos, I'd recommend not to install twrp.
You don't need it, unless you want to install custom stuff (kernels, roms, patches etc) constantly.
If you just want stay on stock OOS. Just update through android and patch magisk after update with installing to inactive slot (before reboot).
BesoC said:
Just to flush stock 10.0.1 to SlotB
Click to expand...
Click to collapse
And what for? A/B devices are not meant to have the same rom on both slots.
Just run your Android 10.0.1 now, don't bother at all about slots, and on next update it will install on inactive slot, you'll just have to install Magisk on inactive slot before rebooting as said just above.
It you don't plan to flash custom ROMs you don't need twrp.
BesoC said:
Did you turned off your phone? You should hold VolUp+Power buttons until phone turns off - about 10-15 seconds. Then Press VolDown+Power to get into bootloader
Click to expand...
Click to collapse
As I stated, I followed the steps the OP had posted. The phone would turn off, but would not boot into bootloader mode, it just showed the initial screen. Believe me, I tried!
I've sent the phone back to OnePlus for repair/replacement, I was well under the warranty period.
BesoC said:
Hi
Have an unrooted international version of OnePlus6t. decided to upgrade from 9.0.17 to 10.0.1 and root. Decided to follow [Ultimate-Guide] ★ OnePlus 6T OOS-10 TWRP-Root-Magisk from OOS-9 guide, Method 3.
Installed 10.0.1 , phone booted OK,
restarted to bootloader
Stock Recovery >> "Wipe data and cache" > "Erase everything" > Reboot to Bootloader
fastboot flash boot .\twrp-3.3.1-28-fajita-Q-mauronofrio.img
Changed to Slot B
reboot to recovery
Stock Recovery >> "Wipe data and cache" > "Erase everything" > Reboot to Bootloader
fastboot flash boot .\twrp-3.3.1-28-fajita-Q-mauronofrio.img
Now phone is just showing "The bootloader is unlocked and software integrity cannot be guaranteed blah blah blah' screen. What can i do?
Please advise
Thanks in advance
P.S. Power+VolumeUp buttons combination just turns phone off. When I turn it on again, phone stucks on the same screen
UPD: OK I am able to get into fastboot mode. What can be done next?
UPD 2: Using mauronofrio's AllInOne tool I was able to boot twrp for Pie, change slot back to A and voila! I have TWRP and Andriod 10.0.1 back again. Hooray!
Now the only thing that bothers me is that seems that I have Q on SlotA and Pie on SlotB. Can it cause any unwanted effects?
Click to expand...
Click to collapse
I am currently experiencing the same issue, how did you get it to go into fastboot mode? I've been traying for hours!