My wife and I are wanting to switch to T-mobile and give them a try since we would be saving about $100 a month.
I have a Verizon Galaxy S on Verizon. I heard that the Verizon S7 is unlocked, but some of the bands for t-mobile are turned off.
So here are my questions.
1. Is there a way to get everything turned on to work fully on T-mobile?
2. Depending on what is done to get bands to work on Verizon S7 will T-mobile updates be installed to the phone?
3. If the phone is flashed would that require manual updates as long as I have the phone?
4. Besides verizon apps would there be any things that would not work on the phone (Apps, features,...)?
5. I'm very techie, but have never flashed a phone. If this is necessary are there step by step directions to accomplish this?
6. Is there a way to go back to Verizon with the S7 if we switch to t-mobile and then decide to go back to Verizon?
7. Anything else...?
Thanks for your help!
andunn said:
My wife and I are wanting to switch to T-mobile and give them a try since we would be saving about $100 a month.
I have a Verizon Galaxy S on Verizon. I heard that the Verizon S7 is unlocked, but some of the bands for t-mobile are turned off.
So here are my questions.
1. Is there a way to get everything turned on to work fully on T-mobile?
2. Depending on what is done to get bands to work on Verizon S7 will T-mobile updates be installed to the phone?
3. If the phone is flashed would that require manual updates as long as I have the phone?
4. Besides verizon apps would there be any things that would not work on the phone (Apps, features,...)?
5. I'm very techie, but have never flashed a phone. If this is necessary are there step by step directions to accomplish this?
6. Is there a way to go back to Verizon with the S7 if we switch to t-mobile and then decide to go back to Verizon?
7. Anything else...?
Thanks for your help!
Click to expand...
Click to collapse
All of the US S7's are the exact same hardware. You can use Odin and flash the T Mobile firmware and essentially have a T Mobile S7. If you want to go back to Verizon you could the reflash the Verizon firmware. You can search and get instructions on how to use Odin and use updato.com to get firmware. The T Mobile version is SM-G930T and Verizon is SM-G930V when searching for the Firmware.
Related
Hi all.
I have a G930P just unlocked (USB/hardware method via GSMZambia). Currently has older OTA-restricted ROM to allow the unlock.
I'd like to update to the newest G930U firmware to get rid of all the Sprint stuff.
We are Verizon (USA) customers, and will uset he phone on the VZW network. I have already confirmed this works after the unlock (using the SIM from my own VZW S7).
Question is:
Which G930U firmware do I use? on the download pages they are specified for Sprint, Veriozn, AT&T etc.
Do I use the G930U for VZW because that will be the carrier? What is teh difference between these, I assume it is the splash screen and which radios are set as the default?
Thanks
Wanted to follow up on this.
After some careful comparison I realized that ALL the "u" firmware files listed - for each of the different carriers - are in fact all the same file. Which make sense b/c it's intended for a phone that starts off life w/ possibility to go to any network.
So after putting the "u" firmware on my formerly Sprint phone, it works flawlessly on Verizon. As far as I can tell all the relative radio bands are working equally well as my other G930V (native Verizon) phone.
Hopefully this will be helpful to somebody else in the future....
who did you get lte and voice to work. for some reason i can only get one or the other to work. not both
DHG4DRAGON8 said:
who did you get lte and voice to work. for some reason i can only get one or the other to work. not both
Click to expand...
Click to collapse
I didn't do anything special at all.
I literally installed the reference ROM, and it worked. It has since auto-updated itself several times, and works flawlessly.
It's my wife's phone, I have a G930V w/ Verizon firmware etc (never done anything special w/ it) and the function the same. Just a few skin differences where Verizon has added extra stuff to mine AFAIK.
I've purchased an unlocked Verizon S7 Edge, model SM-G935V, but haven't received it yet. I'm an AT&T customer. The phone should work on AT&T's network since it's unlocked, but I just realized it'll probably still have Verizon-ified firmware, and might not work with certain AT&T-specific features like HD voice, video calling, or voicemail. How will the Verizon firmware behave when it's on the AT&T network? Can I install the latest AT&T firmware on this phone instead, using a similar method to what people are doing for the 935U firmware? I prefer a stock AT&T firmware rather than a beta or rooting. Thanks in advance!
There's another thread in this forum "Stock Firmware for SM-935A (AT&T)". Should I just flash that to my unlocked SM-935V, and essentially turn it into a 935A? I believe the hardware of all S7 Edge models is identical, so I'm hoping that will work.
I did this and applied the 7.0 update - and now I can't seem to revert to any other software. If I were you, I'd flash the U update and forget about carrier-specific garbage.
raduque said:
I did this and applied the 7.0 update - and now I can't seem to revert to any other software. If I were you, I'd flash the U update and forget about carrier-specific garbage.
Click to expand...
Click to collapse
Thanks. Did you have any problems getting LTE data to work with your 935V once it was on the AT&T network? I saw a few mentions from people saying they could only get slower data connections, until they called AT&T to "provision LTE for their SIM" or something. I get the impression it's not enough just to have an AT&T SIM card - like the AT&T network has a registry of phone IDs, and non-AT&T branded phones won't be in it, and so won't get LTE data.
From browsing the 935U thread, it sounds like that firmware is receiving updates much more slowly than the carrier-specific firmwares. The U firmware also wouldn't provide the missing AT&T-specific features I was looking for, like HD voice or WiFi calling, so I'm not convinced it would really be an improvement over just keeping the Verizon fw. But maybe I'll feel differently once I actually get my hands on the phone and play with it - all I'm doing now is reading forum threads and checking my mailbox.
Honestly couldn't tell you. I'm on Verizon with my main device (S7e on U FW). I only flashed the AT&T FW (PK1) so I could flash the unreleased Nougat files.
Now, I can't seem to flash anything but an AT&T rom.
Also FWIW, the U firmware is getting updates slower than carrier roms, but it's still the better rom - untouched by the carrier's bumbling idiot of a dev team, no pre-loaded carrier junk you can't get rid of (only disable), better battery life and better performance.
More FWIW, I don't care about HD Voice or Wifi calling - both those are irrelevant to me.
At&t release today on 2/17/17 official update to Nougat 7.0 build BQA6 with February security.
Clicking from Edge of Galaxy.
I want to do the opposite - flash G935V onto G935A, with the intention of eventually being able to flash back G935A. Not sure if I could do this, though.
Sent from my SM-G930V using Tapatalk
I've got my phone working now. The short answer is yes, as far as I've found, you can flash any carrier's firmware to your S7 Edge. There may be some limitations if the bootloader version on your phone is different from the new firmware's bootloader version, but fortunately I didn't run into that. I went from the Verizon firmware to the AT&T firmware and then to the unbranded 935U firmware.
But for best results, a branded S7 Edge should be used with the same branded firmware, and on the same network. Otherwise you may run into some problems, or certain carrier-specific features won't work. In my case, my Verizon-branded S7 Edge is unable to get Wifi calling and HD Voice (aka VoLTE) on the AT&T network with an AT&T SIM card, no matter what firmware version I use.
s.chamberlin said:
I've got my phone working now. The short answer is yes, as far as I've found, you can flash any carrier's firmware to your S7 Edge. There may be some limitations if the bootloader version on your phone is different from the new firmware's bootloader version, but fortunately I didn't run into that. I went from the Verizon firmware to the AT&T firmware and then to the unbranded 935U firmware.
But for best results, a branded S7 Edge should be used with the same branded firmware, and on the same network. Otherwise you may run into some problems, or certain carrier-specific features won't work. In my case, my Verizon-branded S7 Edge is unable to get Wifi calling and HD Voice (aka VoLTE) on the AT&T network with an AT&T SIM card, no matter what firmware version I use.
Click to expand...
Click to collapse
Really? That's strange. I successfully flashed V firmware on my A and HD voice & WiFi Capping are active
Sent from my SM-G935V using Tapatalk
So you did the opposite direction of what I did? I've read that AT&T is more restrictive about these features than some other carriers, which is maybe why it didn't work for me. I can't find it now, but there was an AT&T community forums thread in which a rep straight-out said that those features won't work on a non-AT&T-branded phone or other unlocked "bring your own device" phone.
To be fair, I'm not certain HD Voice isn't working, since there doesn't seem be a definitive way to test for it. With the AT&T firmware, attempting to turn on wifi calling would give me an error saying it couldn't be activated on my device. With the unbranded 935U firmware and an AT&T SIM card installed, I don't even see an option for turning on wifi calling.
I just picked up a used s7 edge from a at&t customer, every thing that I could find said once unlocked it would work on any network. I unlocked it via at&t, checked that it works on an at&t sim and Tmobile but it is not working on my Verizon sim and their techs can get it to work either.
Will an At&t s7 edge work on a Verizon network? if so how? Or should I find a different phone?
Thanks
Andy
That is an interesting question. I believe all the US based Snapdragon S7 and S7 Edges have the same hardware, so you would just need to flash Verizon or unlocked firmware over the AT&T image. That part is confirmed, as people have gone from V to U and A, and A to U and V. If I were you, I'd probably go for the unbranded firmware, but that's a personal preference.
The real trick is getting Verizon to properly provision it.
At&t is gsm and Verizon is cdma not compatible with cdma you need to give carrier imei that's how cdma works not just with SIM card
Sent from my SAMSUNG-SM-G935A using XDA-Developers Legacy app
The US (Snapdragon) S7 and S7 edge share the same physical hardware. There is a better than average chance that if he flashes the U or V firmware, and can get Verizon to put on their network, it will fly.
G935T to G935A
jshamlet said:
That is an interesting question. I believe all the US based Snapdragon S7 and S7 Edges have the same hardware, so you would just need to flash Verizon or unlocked firmware over the AT&T image. That part is confirmed, as people have gone from V to U and A, and A to U and V. If I were you, I'd probably go for the unbranded firmware, but that's a personal preference.
The real trick is getting Verizon to properly provision it.
Click to expand...
Click to collapse
Question: to convert from one firmware to another do I have to install U first? I want to convert my G935T to G935A to be able to use wi-fi calling. My phone is unlocked and everything works on At&t except for wi-fi calling (Or VoLte as I see it referred to often)
danoelise said:
Question: to convert from one firmware to another do I have to install U first? I want to convert my G935T to G935A to be able to use wi-fi calling. My phone is unlocked and everything works on At&t except for wi-fi calling (Or VoLte as I see it referred to often)
Click to expand...
Click to collapse
If this is your first device with AT&T to support WiFi calling, you may have to get a new SIM (or get your current SIM provisioned correctly).
So are you saying I don't need to install the G935A firmware?
Hello everyone,
I have an unbranded, factory unlocked U1 Samsung Galaxy S8 that I am wanting to switch to Verizon Prepaid. Currently, it's running on Tracfone with the T-Mobile network. Wi-Fi Calling is a must-have for me, but I've heard that it will not work on Verizon with the factory unlocked Galaxy S8 model. It currently works on Tracfone/T-Mobile, though.
Rather than going the extreme route of getting another phone, I was hoping that it would be possible to just flash the Verizon firmware on it in order to gain Wi-Fi Calling and other carrier features from Verizon.
Below are some questions I have about this.
1. Is this likely to work, or would I just be better off to get a branded phone?
2. Is the process as simple as it sounds on the SamMobile site? Or does the process involve something more like this?
3. Will I be able to receive OTA updates after flashing carrier firmware?
4. Are there any particular issues or pitfalls that I should be aware of before attempting this? (besides possible data loss, of course)
5. Will I be able to flash it back 100% to the stock firmware later on if I want to sell it?
6. Is there any other way to get Verizon Wi-Fi Calling while staying on the unlocked firmware?
Any input would be appreciated.
Thanks!
Hello! I've been out of the Android scene for a few years so I have a question that I can't seem to find the answer to by searches.
Can I flash the unlocked U1 firmware to a Verizon S10+ and use it on AT&T? I know I'll lose VoLTE and WiFi calling, but I don't really care about those. Mainly, I'm just trying to see if I can use a Verizon S10+ on AT&T. Ideally, I'd like to flash the AT&T firmware on the device but from what I've gathered, that firmware isn't available yet.
I had a Galaxy S8+ when it came out and I used Odin to flash between U1 and AT&T firmware so the process isn't entirely new to me.
A bit of background:
I'm looking to jump off of the dead iPhone train and hop back into Android with the S10+. I'm currently trying to sell/trade my iPhone XS Max in order to make the switch.
I have someone who is willing to trade me their Black S10+ for my iPhone as an even trade but their S10+ is from Verizon. It's unlocked but it's still running the stock Verizon firmware.
I just want to know what I have to do with this trade in order for it to work for me. I want to make sure I get a phone I can use. Any advice or input would be greatly appreciated!
Thanks for any help!
I'm not entirely sure if this will work on the S10+, I haven't tried it yet, but when I had the S8+(it was from Verizon as well), I'd take it internationally with a different sim card, it would just prompt me to reboot the phone and it would automatically apply the appropriate CSC settings. I was on stock VZW firmware as well and VoLTE worked (wifi calling didnt).
You should be fine either way though, people have successfully flashed the U1 firmware on their VZW devices for the S10+, so you shouldn't have any issues getting your AT&T sim card to work on it.
Edit: link to get the U1 firmware
https://forum.xda-developers.com/s10-plus/how-to/sm-g975u-firmware-downloads-tmo-spr-att-t3908657
aroy97 said:
I'm not entirely sure if this will work on the S10+, I haven't tried it yet, but when I had the S8+(it was from Verizon as well), I'd take it internationally with a different sim card, it would just prompt me to reboot the phone and it would automatically apply the appropriate CSC settings. I was on stock VZW firmware as well and VoLTE worked (wifi calling didnt).
You should be fine either way though, people have successfully flashed the U1 firmware on their VZW devices for the S10+, so you shouldn't have any issues getting your AT&T sim card to work on it.
Edit: link to get the U1 firmware
https://forum.xda-developers.com/s10-plus/how-to/sm-g975u-firmware-downloads-tmo-spr-att-t3908657
Click to expand...
Click to collapse
I wish Samsung included the BYOD update in the S10+, that would make it so much easier. I think I'm just gonna make the trade.
I've read through that thread and that's what I think I'm going to do. I'd much rather flash the AT&T version, but seeing as how it's not available, the U1 will do fine until it's released. I'll just need to switch to a different voicemail service in the meantime. lol
I got a Verizon S10+ and it is running build PPR1.180610.011.G975USQS2ASGB, I have confirmed that putting an AT&T SIM gives me network ability to call and what not. I want to flash the stock U1 branded firmware, is it okay if I flash G975U1UEU1ASD8 with Odin?
SimplyNando said:
Hello! I've been out of the Android scene for a few years so I have a question that I can't seem to find the answer to by searches.
Can I flash the unlocked U1 firmware to a Verizon S10+ and use it on AT&T? I know I'll lose VoLTE and WiFi calling, but I don't really care about those. Mainly, I'm just trying to see if I can use a Verizon S10+ on AT&T. Ideally, I'd like to flash the AT&T firmware on the device but from what I've gathered, that firmware isn't available yet.
I had a Galaxy S8+ when it came out and I used Odin to flash between U1 and AT&T firmware so the process isn't entirely new to me.
A bit of background:
I'm looking to jump off of the dead iPhone train and hop back into Android with the S10+. I'm currently trying to sell/trade my iPhone XS Max in order to make the switch.
I have someone who is willing to trade me their Black S10+ for my iPhone as an even trade but their S10+ is from Verizon. It's unlocked but it's still running the stock Verizon firmware.
I just want to know what I have to do with this trade in order for it to work for me. I want to make sure I get a phone I can use. Any advice or input would be greatly appreciated!
Thanks for any help!
Click to expand...
Click to collapse
HEY I know have the same problem... Does it work.., I have installed the firmware and all so should I go for it.., waiting for your reply
I have Verizon unlocked phone and I'm able to use internationally where there is no Verizon, but I'm not getting updates so I have downloaded latest firmware should I flash it, also now I don't need any Verizon sim after flashing right ?
Yes you can flash U1 firmware to a U device and vica versa. The U means Universal, so you can flash AT&T, Verizon, T-mobile, or unlocked firmware to it. You gotta use the patched version of Odin though.
SimplyNando said:
Hello! I've been out of the Android scene for a few years so I have a question that I can't seem to find the answer to by searches.
Can I flash the unlocked U1 firmware to a Verizon S10+ and use it on AT&T? I know I'll lose VoLTE and WiFi calling, but I don't really care about those. Mainly, I'm just trying to see if I can use a Verizon S10+ on AT&T. Ideally, I'd like to flash the AT&T firmware on the device but from what I've gathered, that firmware isn't available yet.
I had a Galaxy S8+ when it came out and I used Odin to flash between U1 and AT&T firmware so the process isn't entirely new to me.
A bit of background:
I'm looking to jump off of the dead iPhone train and hop back into Android with the S10+. I'm currently trying to sell/trade my iPhone XS Max in order to make the switch.
I have someone who is willing to trade me their Black S10+ for my iPhone as an even trade but their S10+ is from Verizon. It's unlocked but it's still running the stock Verizon firmware.
I just want to know what I have to do with this trade in order for it to work for me. I want to make sure I get a phone I can use. Any advice or input would be greatly appreciated!
Thanks for any help!
Click to expand...
Click to collapse
As Just changing csc without installing the system is more than enough. Even the company logo changes. Just look for the samkey program and you will see