Database Users

Verizon i815 ICS Update request

Well lo and behold I am being offered the update to ICS. I have a rooted HC w/ CWM installed (no bloat removed) so I assumed that I wouldn't get an offer to update. Anyone know if I can locate the Update file anywhere to share?
Update: I located a FD01 to FH10 update that s 29.3MB in the cache folders, so I'm guessing that this isn't the ICS update (or maybe it is). Anyone have thoughts on this one?

Just downloaded and installed. Still at 3.2. Haven't noticed any real changes, so maybe just an incremental to get the tab ready for ICS.

hkusp40cal said:
Just downloaded and installed. Still at 3.2. Haven't noticed any real changes, so maybe just an incremental to get the tab ready for ICS.
Click to expand...
Click to collapse
OK, so it's not the ICS update then. I have it saved on my SD card and can upload if any devs want to take a look inside, if that's even possible.

Verizon is using Odin to push the update. Mine notified me and when I responded it rebooted to the boot loader then rebooted to 3.2. I did a manual reboot power + volume down and it entered Odin. I thought this was wrong and called tech support. They said it was correct and I should leave it on the download screen for about 20 minutes while it downloaded the update.
Right now I'm waiting to see if it completes.
According to support when it reboots it will have its.
This is different from my other GT ics updates but tech said they were having trouble with the Samsung servers so they changed to Odin.
We'll see soon enough...
Sent from my Nexus 7 using Tapatalk 2

That's an old update. What we are awaiting is LP10.

rdbwpb said:
Verizon is using Odin to push the update. Mine notified me and when I responded it rebooted to the boot loader then rebooted to 3.2. I did a manual reboot power + volume down and it entered Odin. I thought this was wrong and called tech support. They said it was correct and I should leave it on the download screen for about 20 minutes while it downloaded the update.
Right now I'm waiting to see if it completes.
According to support when it reboots it will have its.
This is different from my other GT ics updates but tech said they were having trouble with the Samsung servers so they changed to Odin.
We'll see soon enough...
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
So I waited to install until I saw hkusp's post and then tried and when it rebooted, it rebooted into the v5.5 CWM that I have installed (didn't upgrade to v6 yet) and said that the update failed. Now it can't find the update.....I guess I can wait to see what happens to other folks.

Attempting the odin method now to see what happens.

Someone needs to find a way to capture this odin file.

okashira said:
Someone needs to find a way to capture this odin file.
Click to expand...
Click to collapse
Same thing happening here. Just got the update... ran it... still at 3.2. Rebooted manually (after the initial reboot)... nothing new. Rooted phones before... but have left the 7.7 alone so running stock.

Odin has been running 45 minutes. Support called me back and said leave it. The update is 250mb or so and if it's coming through my lte here it will be a while (I don't get great signal in my house) . Support says 20 to 45 minutes is the he norm.
My Odin screen just says downloading with no progress indicator. Is anyone seeing something different?
Sent from my Nexus 7 using Tapatalk 2

rdbwpb said:
Odin has been running 45 minutes. Support called me back and said leave it. The update is 250mb or so and if it's coming through my lte here it will be a while (I don't get great signal in my house) . Support says 20 to 45 minutes is the he norm.
My Odin screen just says downloading with no progress indicator. Is anyone seeing something different?
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
Something ain't right. I am not saying don't listen to support.
But I don't think there is any radio or wireless access in odin mode. you can only"download" over USB, or perhaps, from the sd card.

okashira said:
Something ain't right. I am not saying don't listen to support.
But I don't think there is any radio or wireless access in odin mode. you can only"download" over USB, or perhaps, from the sd card.
Click to expand...
Click to collapse
Wouldn't be the first time a Verizon rep made stuff up.

mgleed said:
Wouldn't be the first time a Verizon rep made stuff up.
Click to expand...
Click to collapse
I have been "downloading" for an hour now. No changes, no progress bar, nothing. Will probably keep it up until I head out for the night and then stop it.

I didn't / don't think there is support for networks in Odin either but I'm just passing along what level 2 support told me. I have 2 other gts (wifi) only that have gone through this update and it wasn't like this. The tech told me that Odin would use WiFi or cell depending on what's available.
I've lost faith on this pass and I'm waiting on a call back from support to restart the process. She said if it didn't work I'd need to do a factory reset and restart the process.
This tab is a week old so I'm good with the reset I just want it finished.
Has anyone completed an update.
Sent from my Nexus 7 using Tapatalk 2

rdbwpb said:
I didn't / don't think there is support for networks in Odin either but I'm just passing along what level 2 support told me. I have 2 other gts (wifi) only that have gone through this update and it wasn't like this. The tech told me that Odin would use WiFi or cell depending on what's available.
I've lost faith on this pass and I'm waiting on a call back from support to restart the process. She said if it didn't work I'd need to do a factory reset and restart the process.
This tab is a week old so I'm good with the reset I just want it finished.
Has anyone completed an update.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
You can exit ODIN by simply holding down the power button until it shuts down then powering back up. It won't wipe anything out your GT will be as it was.

mgleed said:
You can exit ODIN by simply holding down the power button until it shuts down then powering back up. It won't wipe anything out your GT will be as it was.
Click to expand...
Click to collapse
I did a factory reset then tried again. No dice.
Support called, they ended up calling Samsung who said they were getting reports of the failure and the the update was available via kies.
I called Samsung and level 1 support has no record of an update being available.
I tried kies and I've yet to get the i815 to connect properly.
That's enough for now. I guess we'll just have to wait and see.

rdbwpb said:
I did a factory reset then tried again. No dice.
Support called, they ended up calling Samsung who said they were getting reports of the failure and the the update was available via kies.
I called Samsung and level 1 support has no record of an update being available.
I tried kies and I've yet to get the i815 to connect properly.
That's enough for now. I guess we'll just have to wait and see.
Click to expand...
Click to collapse
i'm getting the Yellow Triangle which means error once it enters Bootloader. I'm also getting the same 29.3mb download before reboot. Tech says on twitter it might not be completely available yet to try tomorrow. I don't think Kies works with the i815 does it?

I've always got a "your device is not supported" pop up when trying to connect to kies. :/
I have not tried connecting for this update though.
Sent from my SCH-I815 using xda premium

Update to 4.3 - My Wifi Interrupted...now have to wait 24hrs

Hi all,
(This is regarding my AT&T Samsung Galaxy S4)
I was updating via Wifi to Jelly Bean 4.3 however I went outside and interrupted the Wifi connection. I tried to re-do the software update and it says "Current software up to date, you may check back in 24 hours". I then tried switching my clock manually to tomorrow, but I got the same message and now it says "Current software up to date, you may check back in 48 hours".
Question is, does anyone know how to bypass this dumb message or does anyone know of a direct download? I also tried Kies but it wont work on my company laptop for security reasons.
Thanks a bunch!

I had the same problem. I turned off the Automatic date and time in the settings and set the clock ahead as needed. It worked, and after 4.3 was installed I turned Auto time back on.

callison4321 said:
I had the same problem. I turned off the Automatic date and time in the settings and set the clock ahead as needed. It worked, and after 4.3 was installed I turned Auto time back on.
Click to expand...
Click to collapse
Thanks for your input. I did try this multiple times and it only says "Software up to date". I should have never interrupted the wifi - now I can't get the download going again.

Reboot the phone,then set date forward 1 day,should allow you to download the update then
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app

customhdrider said:
Reboot the phone,then set date forward 1 day,should allow you to download the update then
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ok, I'll give this one more try. I wonder why there's not a direct download link available anywhere, like on the AT&T website.
Thanks.
EDIT - I tried and same thing...just says software is up to date I think I lost my one chance to get the update and now this phone thinks I'm at 4.3 or something. Oh well...maybe I'll just wait to see it works in another week or so.

thasquizzle said:
Hi all,
(This is regarding my AT&T Samsung Galaxy S4)
I was updating via Wifi to Jelly Bean 4.3 however I went outside and interrupted the Wifi connection. I tried to re-do the software update and it says "Current software up to date, you may check back in 24 hours". I then tried switching my clock manually to tomorrow, but I got the same message and now it says "Current software up to date, you may check back in 48 hours".
Question is, does anyone know how to bypass this dumb message or does anyone know of a direct download? I also tried Kies but it wont work on my company laptop for security reasons.
Thanks a bunch!
Click to expand...
Click to collapse
Download and copy "update-mf3-mj9.zip" to your SD card, get into recovery mode, and find the file by updating from external SD card. I just did it and it works fine.

ishta21 said:
Download and copy "update-mf3-mj9.zip" to your SD card, get into recovery mode, and find the file by updating from external SD card. I just did it and it works fine.
Click to expand...
Click to collapse
Same happend to me .only way I was able to update and it not take 4 to 8 hrs to dl was to have att push update to my phone witch only took 2hrs..lol. only haha..
Sent from my SAMSUNG-SGH-I337 using xda app-developers app

ishta21 said:
Download and copy "update-mf3-mj9.zip" to your SD card, get into recovery mode, and find the file by updating from external SD card. I just did it and it works fine.
Click to expand...
Click to collapse
Hi, I'd love to try this. Do you know where I can get "update-mf3-mj9.zip"?
Thank you!

thasquizzle said:
Hi, I'd love to try this. Do you know where I can get "update-mf3-mj9.zip"?
Thank you!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2526964

???
lodloaded said:
http://forum.xda-developers.com/showthread.php?t=2526964
Click to expand...
Click to collapse
I was told by AT&T tech support to use keys yeah I spelled it wrong anyway they're idiots because you can only do it wifi and three nights in a row it was going to download the update and it says error and then you can't do it another 24 hours I cannot believe that stock phone no one can find a way past the 24 hour clock. Maybe I'll just hangouts shabby. its really shocking because there's so much talent here at least I found this lol

Dont download the mf3/mj9 file. Go to the thread in the general section about the 4.3 update coming nov 13.
Around page 70 there is a link to the full mk2 update. This is what you want. Other wise youll still be short a 28mb update and still have to check for software updates again.

[RELEASE] B190 OTA update for Europe (PLK-L01)

PLK-L01C432B190 (for B180): http://update.hicloud.com:8180/TDS/data/files/p3/s15/G939/g104/v51796/f1/full/update.zip
Just put the .zip file in your dload folder and do local update.
This update fixes issues related to icons and input methods and improves system security with the latest Google security patches. [Fixes] Fixed an issue where the Google input method can't be used when the system language is set to Serbian. Fixed an issue where the icon for the calendar downloaded from the Google Play Store and system calendar icon are the same. [Optimizations] Deleted the Huawei browser (with the Google browser remaining unchanged) for a better user experience. All user data from the Huawei browser, except for bookmarks, will be deleted. Bookmarks will be imported to the Google Chrome after you update your device. Improved device security with the latest Google security patches. Deleted quick sharing of application installation packages and images to ensure their legal use. [Update notes] 1. Before the update, make sure your phone has not been rooted. If you experience any issues during the update, please go to http://consumer.huawei.com/ or visit an authorized service center for assistance. 2. This update will not erase your personal data, but we recommend that you back up any important data before updating.
Click to expand...
Click to collapse

Hello,
Did you tried it ? 'Cause except for the security patch, i dont' think this update worth it, am i right ?

I think people who were in that version didn't got any update to B37x.
To my (limited) knowledge B180>B370 excluding betas.

in my case failed at 9% and I do not want to reset phone... staying at b180

Kikito94 said:
Hello,
Did you tried it ? 'Cause except for the security patch, i dont' think this update worth it, am i right ?
Click to expand...
Click to collapse
Yes, the screenshot taken from my phone
@zinko_pt I got B371 update notification 1.18 GB in size.
@Ing.King really strange, i did it without any issue.
By the way guys, I just released it. It's up to you, updating or not..

We who had only B371 couldn't either update. Where and when will we get B30?
Sent from my PLK-L01 using XDA-Developers mobile app
---------- Post added at 07:08 PM ---------- Previous post was at 06:44 PM ----------
Forget the comments
Sent from my PLK-L01 using XDA-Developers mobile app

memht said:
Yes, the screenshot taken from my phone
@zinko_pt I got B371 update notification 1.18 GB in size.
@Ing.King really strange, i did it without any issue.
By the way guys, I just released it. It's up to you, updating or not..
Click to expand...
Click to collapse
Well ? You made this release or it's an official one ?

Kikito94 said:
Well ? You made this release or it's an official one ?
Click to expand...
Click to collapse
Of course official :laugh: it's from hi-cloud servers. It means "I found it and shared it".

memht said:
Of course official :laugh: it's from hi-cloud servers. It means "I found it and shared it".
Click to expand...
Click to collapse
Hehe 'cause u said "i released"
Okay okay thank's for sharing
I will try it, maybe one day
Edit 1 : i decided to install it, so i removed su, put recovery stock back but error too, i don't think a miss something, keep trying...

Kikito94 said:
Hehe 'cause u said "i released"
Okay okay thank's for sharing
I will try it, maybe one day
Edit 1 : i decided to install it, so i removed su, put recovery stock back but error too, i don't think a miss something, keep trying...
Click to expand...
Click to collapse
Really soo weird, I installed it at once without facing any problem.
It doesn't need a clean B180 rom because I installed it over my usual rom. It wasn't clean.
Something must be wrong in somewhere... but where?

Back here again..
No good news, tried to instal via sd, same issue, fail at 6%
But, but, but there might be a reason, i flashed the sdk21 of xposed, and idk how to remove it.. maybe this is the cause of it....
When you installed, you had to : unroot & put the recovery back ? Or you where "clean"
I'll try tomorrow, with a rest head

Kikito94 said:
Back here again..
No good news, tried to instal via sd, same issue, fail at 6%
But, but, but there might be a reason, i flashed the sdk21 of xposed, and idk how to remove it.. maybe this is the cause of it....
When you installed, you had to : unroot & put the recovery back ? Or you where "clean"
I'll try tomorrow, with a rest head
Click to expand...
Click to collapse
Oh, when I was saying "not clean" I meant installed apps and my all data
And yes, my rom was clean if we consider root and recovery condition.

memht said:
Oh, when I was saying "not clean" I meant installed apps and my all data
And yes, my rom was clean if we consider root and recovery condition.
Click to expand...
Click to collapse
Hi,
Hmmm so maybe the xposed package.rar i've flashed made this error
Well, i'll try when i receive the H8
Or maybe i had to put the recovery of B100 instead of B180 :/
Edit 1 : When i check the local.prop, there is "ro.dual.sim.phone=false" or the PLK-L01 is a dual sim, so i don't understand ^^
Edit 2 : Flash with TWRP =
MD5's missing

coming from B180 stock /rooted /xposed.....
1.) i flashed all possible partitions i had extracted (HuaweiExtractor) from B180. (system; cust; boot; recovery)
2.) reboot
3.) i flashed full rom B180 from folder dload (vol up&down&power) to be sure to get really all parts of firmware!
4.) reboot
5.) local update b190.zip from folder dload
6.) reboot
7.) i flashed twrp rc3 with fastboot to recovery partition
8.) had rooted and installed xposed now
all works as expected! Now i am on B190.
at least i had to install some modifications to system again and recover my data partition (twrp)
all in all nearly 1 hour hard work!

non-toxic said:
coming from B180 stock /rooted /xposed.....
1.) i flashed all possible partitions i had extracted (HuaweiExtractor) from B180. (system; cust; boot; recovery)
2.) reboot
3.) i flashed full rom B180 from folder dload (vol up&down&power) to be sure to get really all parts of firmware!
4.) reboot
5.) local update b190.zip from folder dload
6.) reboot
7.) i flashed twrp rc3 with fastboot to recovery partition
8.) had rooted and installed xposed now
all works as expected! Now i am on B190.
at least i had to install some modifications to system again and recover my data partition (twrp)
all in all nearly 1 hour hard work!
Click to expand...
Click to collapse
Hi,
In fact you just cleaned up your B180 in order to instal the 190 ?
The "real" B180
Pure stock if i could say ? Sure, it will work, but i tried to install it without getting back to stock^^

uff 1 hour to achieve upgrade... pity that I have to do factory reset to make upgrade to b190, no root no open bootloader no changes to firmware despite all this I cannot upgrade normal way... very sad, bad job honor(huawei)

because i had made a backup of my apps and data with the HUAWEI backup app (update to version from PlayStore is necessary!) recovery was easy! Had to remove some blood ware and unused apps only!
then reinstalled PMplus; managed autostart and apps they should stay on if screen is off.
reinstalled my google account
all in all a little bit more than 1 hour like i told you
now i am on b190 rooted; xposed and xprivacy activ on; and of curse Viper4Android for better sound.
real easy!

Kikito94 said:
Hehe 'cause u said "i released"
Okay okay thank's for sharing
I will try it, maybe one day
Edit 1 : i decided to install it, so i removed su, put recovery stock back but error too, i don't think a miss something, keep trying...
Click to expand...
Click to collapse
How did you update it? if you were rooted then you have to flash img files manually first before doing a three button update.

DigiGoon said:
How did you update it? if you were rooted then you have to flash img files manually first before doing a three button update.
Click to expand...
Click to collapse
Hi,
I tried a lot a thing, but i prefer stay in B180 i got backup corrupted, i thought it was due to the switch version but no, so, tried via sd, internal, 3 buttons, after that an error occured, "recovery partition missing"
Well i've reset everything from B100 to get back to B180, after that, tried ota researching, but it only find the B371 doesn't matter ^^

Kikito94 said:
Hi,
I tried a lot a thing, but i prefer stay in B180 i got backup corrupted, i thought it was due to the switch version but no, so, tried via sd, internal, 3 buttons, after that an error occured, "recovery partition missing"
Well i've reset everything from B100 to get back to B180, after that, tried ota researching, but it only find the B371 doesn't matter ^^
Click to expand...
Click to collapse
Yes, as B371 is the latest one so they will push B371 only, now there are no incrementals. But I have put up a thread here, maybe sometime later I'll post the OTAs too.
Sent from my PLK-L01 using Tapatalk

Just got n910t november n910tuvs2epk2 ota update in 60mb

Just got November ota update in 60mb i am just curious to know if it is gonna lock the bootloader.
UPDATE-/ BOOTLOADER STILL UNLOCKED I TESTED & DOWNGRADED TO 5.1.1 OK1 .

I just received it as well. I use my phone for work so it's encrypted but could you try to downgrade and let's us know what happened

Yes, you can still downgrade to 4.4.4 with the new update

This update should give me enough time to read the details of the update before it reboots my phone in the 25 seconds. At that point, we don't have the ability to "abort" or decline the agreement anyway.

Note 4 tmo, downloads the 60mb update, phone enters recovery mode then i get "update failed phone will recover the original configuration" .
I'm full stock, no root, no custom recovery no nothing. Anyone could help me?

I'd recommend you use the desktop version of ODIN with the latest FULL ROM to restore your device (without wiping) to the version before the OTA update. You can then try the update process again.

enian.doda said:
Note 4 tmo, downloads the 60mb update, phone enters recovery mode then i get "update failed phone will recover the original configuration" .
I'm full stock, no root, no custom recovery no nothing. Anyone could help me?
Click to expand...
Click to collapse
I encountered the same error last night. I held POWER + VOLUME DOWN to boot into Recovery mode, then I rebooted to System. My phone went through the app optimization process (you know, the screen that you'd see after wiping the Cache/Dalvik Cache).
I assumed that the update failed, but when I checked "About Device," I noticed that it now has the November 1, 2016 security patch (Baseband Version N910TUVS2EPK2).

Anonymously_Unknown said:
I'd recommend you use the desktop version of ODIN with the latest FULL ROM to restore your device (without wiping) to the version before the OTA update. You can then try the update process again.
Click to expand...
Click to collapse
ru_benz said:
I encountered the same error last night. I held POWER + VOLUME DOWN to boot into Recovery mode, then I rebooted to System. My phone went through the app optimization process (you know, the screen that you'd see after wiping the Cache/Dalvik Cache).
I assumed that the update failed, but when I checked "About Device," I noticed that it now has the November 1, 2016 security patch (Baseband Version N910TUVS2EPK2).
Click to expand...
Click to collapse
Sadly mine didn't, as it gave the update failed it reboot normally without app optimization, checked about phone, no changes.
I gave up and updated through Smart Switch... althought the "dm-verification " error still present.

enian.doda said:
Sadly mine didn't, as it gave the update failed it reboot normally without app optimization, checked about phone, no changes.
I gave up and updated through Smart Switch... althought the "dm-verification " error still present.
Click to expand...
Click to collapse
How do u update firmware through smart switch
Sent from my SM-N910T using XDA-Developers mobile app

Anonymously_Unknown said:
This update should give me enough time to read the details of the update before it reboots my phone in the 25 seconds. At that point, we don't have the ability to "abort" or decline the agreement anyway.
Click to expand...
Click to collapse
I noticed it said something about gear3 and RCS messaging system. Didn't have time to read the rest of the change log

SelfElevated2 said:
How do u update firmware through smart switch
Sent from my SM-N910T using XDA-Developers mobile app
Click to expand...
Click to collapse
With phone ON, connect phone to pc through usb, amart switch will tell you automatically THERE'S AN UPDATE AVAILABLE.

Full rom n910tuvs2epk2
Anonymously_Unknown said:
I'd recommend you use the desktop version of ODIN with the latest FULL ROM to restore your device (without wiping) to the version before the OTA update. You can then try the update process again.
Click to expand...
Click to collapse
I just download this from sammobile. Just want to share it...use at your own risk. https://mega.nz/#!oMdHRYaa!vRIN02PsMG6ozSeiRRJ-OBWf0a88x7gVo768my7wpO8

murayoshi said:
I just download this from sammobile. Just want to share it...use at your own risk. https://mega.nz/#!oMdHRYaa!vRIN02PsMG6ozSeiRRJ-OBWf0a88x7gVo768my7wpO8
Click to expand...
Click to collapse
Thanks for sharing
Did you tested it ?

Trex888 said:
Thanks for sharing
Did you tested it ?
Click to expand...
Click to collapse
You're welcome. Not yet because i am in the middle of setting up RamRom when I download it. I am still playing with it. Probably later

murayoshi said:
You're welcome. Not yet because i am in the middle of setting up RamRom when I download it. I am still playing with it. Probably later
Click to expand...
Click to collapse
I flashed the rom through odin, all good.
Still, dm-verification error hunts my phone when entering recovery.
Still no one has a solution to the dm error?

enian.doda said:
I flashed the rom through odin, all good.
Still, dm-verification error hunts my phone when entering recovery.
Still no one has a solution to the dm error?
Click to expand...
Click to collapse
To get rid of it flash custom recovery.

Trex888 said:
To get rid of it flash custom recovery.
Click to expand...
Click to collapse
This thing is i wanted a full stock rom, so to be able to update ota as soon as available.
Custom recovery doesnt offer that.

enian.doda said:
This thing is i wanted a full stock rom, so to be able to update ota as soon as available.
Custom recovery doesnt offer that.
Click to expand...
Click to collapse
Don't take ota updates whenever updates came out sammobiles.com release whole firmware with update.
I had same issue with n910t my i got drk error and i don't see any working method so far the only way is to change motherboard .so whenever i want to update i simply flash whole firmware via odin
Hope that helps

Trex888 said:
Don't take ota updates whenever updates came out sammobiles.com release whole firmware with update.
I had same issue with n910t my i got drk error and i don't see any working method so far the only way is to change motherboard .so whenever i want to update i simply flash whole firmware via odin
Hope that helps
Click to expand...
Click to collapse
Well, I also used odin until now. The fact that you tell me there's no "working method " assures me that you made your searches like I did and found nothing.

Trex888 said:
Don't take ota updates whenever updates came out sammobiles.com release whole firmware with update.
I had same issue with n910t my i got drk error and i don't see any working method so far the only way is to change motherboard .so whenever i want to update i simply flash whole firmware via odin
Hope that helps
Click to expand...
Click to collapse
I have custom ROM and Custom Recovery TWRP.
Will updating the Modem and Bootloader cause me to have to reinstall the ROMS?
Thanks in advance

One UI4 Beta 1, 2 & 3- US - OTA update link (N986U1 only)

Folks - Please do read carefully
One UI 4 Beta is live for Note 20 Ultra in US (Unlocked devices)
This Beta is for SM-N986U1 only
Open up the Samsung members app it will show if there is an update available. Update the app.
After update see the top banners as in my screenshot. Tap on that and sign up for Beta. In case you don't get the sign up banner, see below.
Beta 1 - I was able to capture One UI4 Beta 1 OTA link
Beta 2 - This enables esim on U1 (Unlocked) - One UI4 Beta 2 OTA link
Beta 3 - One UI4 Beta 3 OTA link
Google pay is not working on Beta 1, 2 and 3.
Pre-requisite - To flash Beta 1 you need to be on firmware N986U1UES2DUJ7
Beta 2 should only be flashed after you are on Beta 1
Beta 3 should be flashed only when you are on Beta 2
Just download by clicking the link rename it to update.zip and flash it either through recovery or by using ADB.
If you don't want to download using OTA link, rename etc our good friend @kangi26 has uploaded the beta versions along with the instructions to flash here in the post 3 of his thread along with many other firmwares.
Fair warning flashing through recovery or ADB may wipe your device.
To avoid Wipe (ATT users on U1 firmware) do the following: (Thanks @DevVorteX
Remove SIM
open phone app, dial *#272*IMEI#
Replace IMEI with your IMEI number which you can copy from settings
This brings up service menu
Select XAA
Click Install
Select "Sales&Network Code Change"
Hit the "OK" button
Your phone will restart
When it came back up, I checked in software info and it was XAA/XAA/ATT,XAA (whatever that means)
Reboot to recovery
Sideload the beta via adb
Let it do it's thing and reboot (keep sim out the whole time)
When it boots up, you're good to go
Put the SIM back in, and it'll prompt you to reboot
That's it. No more wipes.
Beta registrations are closed for now as it's full.

That's not available to me yet. And the link doesn't appear to go anywhere for me

I was able to download the .bin file, Will try to get a flash (or will wait until I get the beta sign up option)

kangi26 said:
I was able to download the .bin file, Will try to get a flash (or will wait until I get the beta sign up option)
Click to expand...
Click to collapse
That's correct you should be able to rename it update.zip and flash. Try cleaning members app cache and data And restart the app.

kangi26 said:
I was able to download the .bin file, Will try to get a flash (or will wait until I get the beta sign up option)
Click to expand...
Click to collapse
For those having trouble downloading it, just copy and paste the link into ADM
@warriorvibhu thanks man! Much appreciated

warriorvibhu said:
That's correct you should be able to rename it update.zip and flash. Try cleaning members app cache and data And restart the app.
Click to expand...
Click to collapse
Grazie, I might give the update.zip a shot.
I did the clear cache/and did the Data too, no joy

Well, pulled the trigger. Lets see if I break anything
I'll report back when it's done updating (Still no joy on the Samsung Members)

So it took about 5-10 min to update, and it DOES wipe. But looks good so far, setting up now. I suspect that without signing up for the Beta, it MAY not get updates. It's been a LONG time since I've run a beta and it's hard to remember

kangi26 said:
So it took about 5-10 min to update, and it DOES wipe. But looks good so far, setting up now. I suspect that without signing up for the Beta, it MAY not get updates. It's been a LONG time since I've run a beta and it's hard to remember
Click to expand...
Click to collapse
Can you check if Google Pay is working?

T33H00 said:
Can you check if Google Pay is working?
Click to expand...
Click to collapse
I'll take a look when if finishes updating everything.

Also as a side note, it appears that there is a BP app available in the Samsung app store for Sammy Watches "My BP Lab"

warriorvibhu said:
That's correct you should be able to rename it update.zip and flash. Try cleaning members app cache and data And restart the app.
Click to expand...
Click to collapse
Is there any chance this'll wipe my device. I'm on the unlocked (U1) firmware, but on an ATT device on an ATT sim. I know there used to be something dumb where ATT somehow forced wipes for sideloaded updates. Since I flashed U1 via oden I shouldn't have to worry about that right?

What firmware are you in? is it DUJ7?

kangi26 said:
Also as a side note, it appears that there is a BP app available in the Samsung app store for Sammy Watches "My BP Lab"
Click to expand...
Click to collapse
OH doesn't look like a Sammy app. Looks like a third party app.

DevVorteX said:
Is there any chance this'll wipe my device. I'm on the unlocked (U1) firmware, but on an ATT device on an ATT sim. I know there used to be something dumb where ATT somehow forced wipes for sideloaded updates. Since I flashed U1 via oden I shouldn't have to worry about that right?
Click to expand...
Click to collapse
I have no idea why I quoted you, sorry.

T33H00 said:
Can you check if Google Pay is working?
Click to expand...
Click to collapse
It's not working for me. Samsung pay works fine.

DevVorteX said:
Is there any chance this'll wipe my device. I'm on the unlocked (U1) firmware, but on an ATT device on an ATT sim. I know there used to be something dumb where ATT somehow forced wipes for sideloaded updates. Since I flashed U1 via oden I shouldn't have to worry about that right?
Click to expand...
Click to collapse
If you use the Update.zip method, it will 100% wipe, I can't speak to updating via the Samsung Members

kangi26 said:
If you use the Update.zip method, it will 100% wipe, I can't speak to updating via the Samsung Members
Click to expand...
Click to collapse
No wipe via Samsung members app.
So it seems update.zip method wipes. (did you do ADB or recovery)

I was in older firmware upgraded to DUJ7 and its flashing. so far so good.

kangi26 said:
So it took about 5-10 min to update, and it DOES wipe. But looks good so far, setting up now. I suspect that without signing up for the Beta, it MAY not get updates. It's been a LONG time since I've run a beta and it's hard to remember
Click to expand...
Click to collapse
It's been so long since I've beta tested, I can't remember. Does it come with the Samsung Members Beta apk? What happens when you log in to it?