Related
Here is a first build of cm13 for the zuk z2 pro. Grabbed it at zuk forum. No credits in it at all.
https://d21db4.lt.yunpan.cn/lk/cBCEzUqCIpDvY
Password: 3cb9
Mega Link
https://mega.nz/#!BwwGTLja!_bALdqa6vyjGgoZ8xEXmu47k8OKLYg0gZwp2UcOK1Ms
oook its a good start
Was anyone able to flash it and could give a quick overview, how good it works?
Edit:
Oh, and also there was already an update release, but unfortunately the file is down at the moment.
Link to the thread: http://bbs.zuk.cn/z2pro/t122238/?ordertype=1 (use Google Translate)
Update
The second edition follows repair
+ Invalid repair light
+ Repair GPS
+ The latest update to the underlying file
+ Correction Bluetooth
I flashed another ROM posted on the BBS.
http://bbs.zuk.cn/z2pro/t122452/
Seems good.
whyes said:
I flashed another ROM posted on the BBS.
http://bbs.zuk.cn/z2pro/t122452/
Seems good.
Click to expand...
Click to collapse
Do you think, everythink is working like sensors, mobile data,gps?
Lenovo Zuk Z2 Pro
dtosun said:
Do you think, everythink is working like sensors, mobile data,gps?
Lenovo Zuk Z2 Pro
Click to expand...
Click to collapse
I have not experience this ROM fully. Flashed it 15 min ago
whyes said:
I have not experience this ROM fully. Flashed it 15 min ago
Click to expand...
Click to collapse
[emoji1] [emoji6]
Lenovo Zuk Z2 Pro
whyes said:
I have not experience this ROM fully. Flashed it 15 min ago
Click to expand...
Click to collapse
Would be great, if you could tell us more about your experience in the future!
Edit:
If I understood it correctly from the Chinese thread, vibration is not working. Is this correct?
whyes said:
I flashed another ROM posted on the BBS.
http://bbs.zuk.cn/z2pro/t122452/
Seems good.
Click to expand...
Click to collapse
How did you install it?
When i try via TWRP, there is an error.
"Systen partition has unexpected contents after OTA update"
dtosun said:
How did you install it?
When i try via TWRP, there is an error.
"Systen partition has unexpected contents after OTA update"
Click to expand...
Click to collapse
Can you read Chinese?
I follow these steps:
1. unlock http://bbs.zuk.cn/z2pro/t116264/
2. install twrp http://bbs.zuk.cn/z1/t112661/
3. install the Remix ROM which is based on CM13 http://bbs.zuk.cn/z1/t112661/
4. install Gapps (Banks Dynamic G-apps) in this thread http://forum.xda-developers.com/nexus-6p/development/rom-6-0-1-official-ownrom-v3-0-t3357338
done.
---------- Post added at 09:27 PM ---------- Previous post was at 09:22 PM ----------
Tek5 said:
Would be great, if you could tell us more about your experience in the future!
Edit:
If I understood it correctly from the Chinese thread, vibration is not working. Is this correct?
Click to expand...
Click to collapse
Yes.
I've experienced this the Remix ROM for 2 hr and found that only the vibrate did not work.
whyes said:
Can you read Chinese?
I follow these steps:
1. unlock http://bbs.zuk.cn/z2pro/t116264/
2. install twrp http://bbs.zuk.cn/z1/t112661/
3. install the Remix ROM which is based on CM13 http://bbs.zuk.cn/z1/t112661/
4. install Gapps (Banks Dynamic G-apps) in this thread http://forum.xda-developers.com/nexus-6p/development/rom-6-0-1-official-ownrom-v3-0-t3357338
done.
Click to expand...
Click to collapse
Yes, i did all. But my rom is rooted. May be this is the problem
dtosun said:
Yes, i did all. But my rom is rooted. May be this is the problem
Click to expand...
Click to collapse
Maybe you should flash the Stock ROM first.
Thread moved out of the Android Development as it is not a original work of the Owner/OP
Thanks for the understanding
whyes said:
Maybe you should flash the Stock ROM first.
Click to expand...
Click to collapse
Was your ZUI rooted, when you flashed CM?
Which ZUI version had you installed?
Would be great if you could tell us, because maybe this solves the problem!
Tek5 said:
Was your ZUI rooted, when you flashed CM?
Which ZUI version had you installed?
Would be great if you could tell us, because maybe this solves the problem!
Click to expand...
Click to collapse
My ZUI is rooted. I have latest ZUI Rom, Which is 2.0.48 st.
I think the problem is TWRP. I try everything but no result.
Lenovo Zuk Z2 Pro
dtosun said:
My ZUI is rooted. I have latest ZUI Rom, Which is 2.0.48 st.
I think the problem is TWRP. I try everything but no result.
Lenovo Zuk Z2 Pro
Click to expand...
Click to collapse
A user posted (Link to the post) this TWRP in the zukfans forum: http://pan.baidu.com/s/1o7YmoSa (PW: 9967)
I don‘t know if it helps and what it does, but when you have the feeling that it has something to do with your TWRP, maybe this helps!
Tek5 said:
Was your ZUI rooted, when you flashed CM?
Which ZUI version had you installed?
Would be great if you could tell us, because maybe this solves the problem!
Click to expand...
Click to collapse
Before I unlock the phone, the ZUI ROM was not rooted.
CM-13.0 http://bbs.zuk.cn/z2pro/t122238/
Remix http://bbs.zuk.cn/z2pro/t122452/
Mokee http://bbs.zuk.cn/z2pro/t122616/
All for Z2 Pro
---------- Post added at 09:53 AM ---------- Previous post was at 09:45 AM ----------
Work module:
Camera
WiFi
touch screen
display
sound
sensor
Base band
dual card
fingerprint
flashlight
charge when shutdown
SELinux
doze
Automatic brightness
LED
GPS
Do not work:
Vibration
whyes said:
Before I unlock the phone, the ZUI ROM was not rooted.
Click to expand...
Click to collapse
Thank you!
Which ZUI version did you use? ZUI 1.9 or 2.0?
The first builds of Lineage are out for the shamu finally!
download.lineageos.org
How do I get rid of the ugly watermark across my screen?
The link to the nightly version doesn't work
Link to nightly worked fine for me. Haven't flashed yet, but it downloaded, albeit slowly.
https://download.lineageos.org/shamu
How to remove this cm to lineage migration build background ?
People who have the watermark did you flash the nighly or experimental?
From my understanding the experimental build is only used for migration from CM and will have that watermark no matter what, the nightly build should have no water mark. I believe they posted this info on their site.
You're supposed to flash nightly over experimental. Just read the instructions...
Dopamin3 said:
People who have the watermark did you flash the nighly or experimental?
From my understanding the experimental build is only used for migration from CM and will have that watermark no matter what, the nightly build should have no water mark. I believe they posted this info on their site.
Click to expand...
Click to collapse
can confirm - no watermark at nightly building!
Strange how everytime I try to download the nightly it fails. No matter what browser I use
first run with lineage - every thing works fine!
Does anyone know, how I can get SElinux "enforcing"? - other kernel? whichone? - need it for using Viper4Android
MartinN6 said:
first run with lineage - every thing works fine!
Does anyone know, how I can get SElinux "enforcing"? - other kernel? whichone? - need it for using Viper4Android
Click to expand...
Click to collapse
You mean permissive, but you can use stock kernel enforced, a bit tricky, you need to root with supersu, latest beta sr3 runs fine. Superuser from los page doesn't recognize viper4a for root at all. I flashed latest arise and supersu, reboot, viper4a still not recognized for root, uninstall viper4a driver, supersu recognize viper4a now, confirm it. Reboot to recovery and reflash latest arise. Now it's working.
If you want Dolby too you have to use blackbird kernel and stay permissive.
coremania said:
You mean permissive, but you can use stock kernel enforced, a bit tricky, you need to root with supersu, latest beta sr3 runs fine. Superuser from los page doesn't recognize viper4a for root at all. I flashed latest arise and supersu, reboot, viper4a still not recognized for root, uninstall viper4a driver, supersu recognize viper4a now, confirm it. Reboot to recovery and reflash latest arise. Now it's working.
If you want Dolby too you have to use blackbird kernel and stay permissive.
Click to expand...
Click to collapse
Thanks for advice!!
And yes of course - sorry - I mean "permissive"
I flashed "Viper4Android_Cleaner_v1_3_Android_7x.zip" and than "ViPER4Android_2.5.0.5_guitardedhero.zip"
... and it works without any trouble ...
MartinN6 said:
Thanks for advice!!
And yes of course - sorry - I mean "permissive"
I flashed "Viper4Android_Cleaner_v1_3_Android_7x.zip" and than "ViPER4Android_2.5.0.5_guitardedhero.zip"
... and it works witout any trouble ...
Click to expand...
Click to collapse
Good, if it works that easy, but there was something about the cleaner, don't remember right now exactly, but it breaks something. May it was dolby.
Edit: using the cleaner always kills cast connection, that's why I didn't use it anymore
MartinN6 said:
first run with lineage - every thing works fine!
Does anyone know, how I can get SElinux "enforcing"? - other kernel? whichone? - need it for using Viper4Android
Click to expand...
Click to collapse
Kernel Adiutor Mod should let you toggle that (requires root) under the Misc Controls tab. I would imagine the ad-filled subpar original Kernel Adiutor from the Play Store would too but I wouldn't recommend using that.
Is there an updater built in or do we flash all updates? Reading in other threads that ppl get a update notification when a new build is available. I'm on experimental cuz the nightly link didn't work when I tried last night
Dopamin3 said:
Kernel Adiutor Mod should let you toggle that (requires root) under the Misc Controls tab. I would imagine the ad-filled subpar original Kernel Adiutor from the Play Store would too but I wouldn't recommend using that.
Click to expand...
Click to collapse
Thanks!
I got it and it (Kernel Adiutor mod) works great!
Now AdAway works again (need SElinux permissiv) - that's very good!
Guys, whats your baseband or radio? My proximity sensor isn't working properly on LineageOS...
MartinN6 said:
Thanks!
I got it and it (Kernel Adiutor mod) works great!
Now AdAway works again (need SElinux permissiv) - that's very good!
Click to expand...
Click to collapse
How did you get those SOFT keys from. Pixel
hashtag_harsh said:
How did you get those SOFT keys from. Pixel
Click to expand...
Click to collapse
sorry I don´t understand what you mean with "SOFT keys" ?
Edit: Aah now I know!
Yes, it's from the mod - link next post! ->
hashtag_harsh said:
How did you get those SOFT keys from. Pixel
Click to expand...
Click to collapse
https://forum.xda-developers.com/nexus-6/themes-apps/cool-pixel-mod-android-7-1-1-t3532951
Here you go
---------- Post added at 19:57 ---------- Previous post was at 19:54 ----------
LeroViten said:
Guys, whats your baseband or radio? My proximity sensor isn't working properly on LineageOS...
Click to expand...
Click to collapse
Latest
https://forum.xda-developers.com/ne...-nexus-6-recovery-flashable-fastboot-t3066052
You can check it with the link below:
https://github.com/abforce/xposed_art_n
It seems that most modules work well except the XPrivacy
now there is a flashable zip.I tried it and it works well
josephnero said:
now there is a flashable zip.I tried it and it works well
Click to expand...
Click to collapse
On stock Sony N?
Didn't think this was even possible
Please share
dillalade said:
On stock Sony N?
Didn't think this was even possible
Please share
Click to expand...
Click to collapse
yep.BTW I also have magisk
https://forum.xda-developers.com/xposed/xposed-android-nougat-sdk-25-arm64-t3639221
please back up before testing though.
josephnero said:
now there is a flashable zip.I tried it and it works well
Click to expand...
Click to collapse
How did you add it?
lionelbac said:
How did you add it?
Click to expand...
Click to collapse
try this mate. don't forget to back up
https://forum.xda-developers.com/xposed/xposed-android-nougat-sdk-25-arm64-t3639221
had magisk with androplus kernel V27 just rebooted to twrp and flashed the zip
hmm.it seems not all of modules work though. so it's a bit limited for now
josephnero said:
yep.BTW I also have magisk
https://forum.xda-developers.com/xposed/xposed-android-nougat-sdk-25-arm64-t3639221
please back up before testing though.
Click to expand...
Click to collapse
I thought it was just only for AOSP.. What FW are you using?
lionelbac said:
I thought it was just only for AOSP.. What FW are you using?
Click to expand...
Click to collapse
The latest stock update.
I also got e xposed working on latest 35 firmware with magisk. it seems to work well I tried two modules and it worked but the only problem is that I keep getting different apps force closing when I open them. Playstore. Facebook and every other. I tried with super su too but the same so temporarily I uninstalled it cause it's annoying. BTW I'm with existenz rom.
I found stock debloted rom by franco28
Anyone have tried thus rom? Will it affect volte nd 4g connectivity?
karan3660 said:
I found stock debloted rom by franco28
Anyone have tried thus rom? Will it affect volte nd 4g connectivity?
Click to expand...
Click to collapse
I tried this ... everything is fine I had 4g +LTE but no volte ?
Running it on my Potter. Zero issues! If you want magisk to work properly flash f2fs loopback module and safety net fix after flashing magisk and you're good to go!
Ok thnxx guys
Done flashing this rom had 4g + volte
Waiting for oreo now ?
Link ?
InsaneNexuS said:
Running it on my Potter. Zero issues! If you want magisk to work properly flash f2fs loopback module and safety net fix after flashing magisk and you're good to go!
Click to expand...
Click to collapse
magisk is already included in aroma installer either you install it or skip it ?
---------- Post added at 03:50 PM ---------- Previous post was at 03:49 PM ----------
frostarun said:
Link ?
Click to expand...
Click to collapse
download the latest one https://franco28.github.io/stockrom/
ayad.phonex said:
magisk is already included in aroma installer either you install it or skip it ?
---------- Post added at 03:50 PM ---------- Previous post was at 03:49 PM ----------
download the latest one https://franco28.github.io/stockrom/
Click to expand...
Click to collapse
Yes magisk is in the installer but to get modules working to you have to flash what I mentioned
I haven't rooted so no need for any files ?
Installed this yesterday, pretty happy with the premise and experience so far. I just want custom stock rom, slightly debloated and latest updates. Battery is already better than the previous Oreo build I tried. Only really lose gcam, differences in Oreo don't really seem that great.
Is this the best close to stock option out there? Was surprised no developer thread.
Only issue I've found is Netflix isn't showing up for me in the Play Store, any thoughts there?
seanpr123 said:
Only issue I've found is Netflix isn't showing up for me in the Play Store, any thoughts there?
Click to expand...
Click to collapse
You're probably failing safety net. Get a safety net checker and see what the result is. You'd probably have to use magisk and magisk hide to see it. Other option is to just download the apk from apkmirror and install manually.
Running a custom kernel working out good for anyone?
This is why the battery life is so good.
InsaneNexuS said:
Running it on my Potter. Zero issues! If you want magisk to work properly flash f2fs loopback module and safety net fix after flashing magisk and you're good to go!
Click to expand...
Click to collapse
Hey can we dirty flash the june patch over the previous? If u know anything abt this?
NeoandGeo said:
This is why the battery life is so good.
Click to expand...
Click to collapse
Custom kernel?
That was with the included original kernel for the ROM.
karan3660 said:
Hey can we dirty flash the june patch over the previous? If u know anything abt this?
Click to expand...
Click to collapse
From my experience I couldn't dirty flash. The dev always wants everyone to clean flash unfortunately
NeoandGeo said:
That was with the included original kernel for the ROM.
Click to expand...
Click to collapse
Did u try latest version
Moto display doesnt work for me..
How difficult would it be to create a debloated version of NPNS25.137-93-10? That is the version on my phone (RETUS) and I love it overall, but can't stand the bloat. I have Froze those apps that I don't need or use but it would be nice to remove them. I don't care for most of the apps that supposedly remove system apps for you because they are usually full of ads and often screw things up for me. Is there a tutorial somewhere on how to debloat it?
The current firmware version is 47.1.A.12.270
Browse to this thread, made by machao44
Create an account and go to ROM下载地址 section, browse to the baidu link and download three files:
the 235 zip file (which is system firmware without the system partition), the xposed fix, and the m-rom.
Flash 235 with newflasher (150mb)
flash twrp
flash the rom through twrp, its 270 (1.5gb)
flash xposed
flash xposedfix
for g8141 users:
go to m-rom system/build.prop, open it with notepad++, replace ctrl-h all things maple-dsds with maple and all g8142 to g8141, save it and copy it back to the rom before flashing.
flash janjan kernel 270 only, no need zip 2~4 it only slows down performance, and then flash supersu after kernel
done!
-flashed full 270
-installed JanJan's .270 GLOBAL kernel and twrp via adb (!!!!) before even booting first
-booted into twrp
-flashed: the FW itself (aroma installer), Xposed (90v3), Gapps (i need'em), debloater, Xposed Fix
-started. Took ~5 minutes for the first start
- FINE
Is this some sort of joke? I cannot download the larger files without the Baidu app (Windows PC) and I cannot read Mandarin/Cantonese so cannot create an account to use it.
I appreciate your efforts, but can you not provide the files here or on some other host where we can get them from?
Mobfigurz said:
Is this some sort of joke?
Click to expand...
Click to collapse
LOL. I have a Chinese Girlfriend. She helped me with the Baidu. That's how you do it... LOL.
But, lol, you should've just looked around for longer.
Here you go:
-google: firmware, xposed-fix
-yandex: firmware
saved-j said:
LOL. I have a Chinese Girlfriend. She helped me with the Baidu. That's how you do it... LOL.
But, lol, you should've just looked around for longer.
Here you go:
-google: firmware, xposed-fix
-yandex: firmware
Click to expand...
Click to collapse
Lucky man and thank you for providing the links, very much appreciated.
Quick question, I know this is stated for. 270 but would this work for. 235?
Mobfigurz said:
Is this some sort of joke? I cannot download the larger files without the Baidu app (Windows PC) and I cannot read Mandarin/Cantonese so cannot create an account to use it.
I appreciate your efforts, but can you not provide the files here or on some other host where we can get them from?
Click to expand...
Click to collapse
The owner asked not to share it so thats why
https://www.coolapk.com/apk/com.baidu.netdisk if you use this you can get it on android and it has download manager built in
Mobfigurz said:
Lucky man and thank you for providing the links, very much appreciated.
Quick question, I know this is stated for. 270 but would this work for. 235?
Click to expand...
Click to collapse
If you have firmware and flash 270 m rom on it it works fine
saved-j said:
-flashed full 270
-installed JanJan's .270 GLOBAL kernel and twrp via adb (!!!!) before even booting first
-booted into twrp
-flashed: the FW itself (aroma installer), Xposed (90v3), Gapps (i need'em), debloater, Xposed Fix
-started. Took ~5 minutes for the first start
- FINE
Click to expand...
Click to collapse
Youre doing it wrong, the fw has kernel in it so you have to flash janjan afterwards
And full 270 sony ofw isnt needed, he has uploaded 115mb 235 firmware to flash with newflasher
amakuramio said:
Youre doing it wrong, the fw has kernel in it so you have to flash janjan afterwards
And full 270 sony ofw isnt needed, he has uploaded 115mb 235 firmware to flash with newflasher
Click to expand...
Click to collapse
actually i'm having some sort of stupid issue, and I can't figure out what is it related to.
i've tried 3 times, and the first time there was some process named "cta_server" from (as far as i remember) /vendor/bin, and it had a trouble computing something, so it would not let the phone into the deep sleep, and it kept the phone hot and drained the battery.
Second time, my contacts won't sync to Google!!!
I've made a backup, and tried for the third time. And it still won't work as it should.
Now, I'm looking for a way to deodex the firmware by myself, and i'm gonna make my f-ing own fw based on this xposed hack!!!
you're welcome to help, or advice...
saved-j said:
actually i'm having some sort of stupid issue, and I can't figure out what is it related to.
i've tried 3 times, and the first time there was some process named "cta_server" from (as far as i remember) /vendor/bin, and it had a trouble computing something, so it would not let the phone into the deep sleep, and it kept the phone hot and drained the battery.
Second time, my contacts won't sync to Google!!!
I've made a backup, and tried for the third time. And it still won't work as it should.
Now, I'm looking for a way to deodex the firmware by myself, and i'm gonna make my f-ing own fw based on this xposed hack!!!
you're welcome to help, or advice...
Click to expand...
Click to collapse
Tell me exactly what you did
amakuramio said:
Tell me exactly what you did
Click to expand...
Click to collapse
well step by step
1. flashed .270 full european
-i've replaced the boot.img in the firmware with JanJans-
2. pushed janjans 270 and aroma-supporting twrp via adb
3. entered twrp, installed the fw, NO REBOOT
4. installed gapps, xposed_systemless_beta3, kernel_permissive, xposed_fix
5. booted up. normally.
set everything up... then either contacts don't sync, either CTA_server gets crazy and heats up the phone.
i wanna deodex the fw and make my own fw anyway. Do you know how to deodex Oreo? I haven't done that since KitKat...
saved-j said:
well step by step
1. flashed .270 full european
-i've replaced the boot.img in the firmware with JanJans-
2. pushed janjans 270 and aroma-supporting twrp via adb
3. entered twrp, installed the fw, NO REBOOT
4. installed gapps, xposed_systemless_beta3, kernel_permissive, xposed_fix
5. booted up. normally.
set everything up... then either contacts don't sync, either CTA_server gets crazy and heats up the phone.
i wanna deodex the fw and make my own fw anyway. Do you know how to deodex Oreo? I haven't done that since KitKat...
Click to expand...
Click to collapse
Completely wrong. In his baidu there is a 235 stock firmware. Flash that one first its only 115 mb. Flash it with newflasher combined in it. Then flash twrp. Then flash the 270 custom rom. Then flash kernel from janjan. Then flash patching zip from janjan then supersu from custom rom package in custom rom by unpacking it then only the supersu zip. Then xposed fix and xposed from rovo89, not the weird one you liked me. Done. If you have g8141 then you also Edit build prop. Make sure its clean flash.
Mobfigurz said:
Is this some sort of joke? I cannot download the larger files without the Baidu app (Windows PC) and I cannot read Mandarin/Cantonese so cannot create an account to use it.
I appreciate your efforts, but can you not provide the files here or on some other host where we can get them from?
Click to expand...
Click to collapse
SONY_XPERIAO_XZP_1.6.1_2
Rom link:https://drive.google.com/file/d/1vxbvHftCxJXXeJfTvlA2LLs75Yn9AHLi/view
Xposed fix for m-rom 1.61
Xposed link:
https://drive.google.com/file/d/12jJ-fAMBouya3pYWcvXCJJa6pDqTm1bw/view
jianlin3062 said:
SONY_XPERIAO_XZP_1.6.1_2
Rom link:https://drive.google.com/file/d/1vxbvHftCxJXXeJfTvlA2LLs75Yn9AHLi/view
Xposed fix for m-rom 1.61
Xposed link:
https://drive.google.com/file/d/12jJ-fAMBouya3pYWcvXCJJa6pDqTm1bw/view
Click to expand...
Click to collapse
Than you very much, I appreciate your help.
There is one more file I need, which I cannot download, the ZXP 235 ROM which has a size of 150MB (•Flash 235 with newflasher (150mb)) Any help getting that would be appreciated.
I've tweaked and translated into English the installer.
I will upload the updated package somewhere soon.
Or maybe I'll make a separate ROM thread instead.
saved-j said:
I've tweaked and translated into English the installer.
I will upload the updated package somewhere soon.
Or maybe I'll make a separate ROM thread instead.
Click to expand...
Click to collapse
The roms easily available anyway, if you install a script in chrome on pc its downloadable directly from BBS dot gfan/pan baidu, google is everyones friend. The translated aroma package will be greatly appreciated.
Beetle84 said:
The roms easily available anyway, if you install a script in chrome on pc its downloadable directly from BBS dot gfan/pan baidu, google is everyones friend. The translated aroma package will be greatly appreciated.
Click to expand...
Click to collapse
Not so easy, the script for Chrome has been deleted and I am still missing one files, the 235 ROM file which is 150MB.
Mobfigurz said:
Not so easy, the script for Chrome has been deleted and I am still missing one files, the 235 ROM file which is 150MB.
Click to expand...
Click to collapse
you can install this ROM on top of any other 235 or 270. That one is just minimum necessary
---------- Post added at 04:35 PM ---------- Previous post was at 04:31 PM ----------
amakuramio said:
Completely wrong.
Click to expand...
Click to collapse
thank you very much. i'm uploading a tweaked and fixed version of this rom
https://drive.google.com/open?id=1_Tm7V7rHOxl0f8s0oQ4uTjmajt-7U7dT
check here. it's being uploaded so it's not yet there right now
saved-j said:
you can install this ROM on top of any other 235 or 270. That one is just minimum necessary
---------- Post added at 04:35 PM ---------- Previous post was at 04:31 PM ----------
thank you very much. i'm uploading a tweaked and fixed version of this rom
https://drive.google.com/open?id=1_Tm7V7rHOxl0f8s0oQ4uTjmajt-7U7dT
check here. it's being uploaded so it's not yet there right now
Click to expand...
Click to collapse
Appreciate the response. Ideally, I want to stay on 235 because I have WiFi calling with my network provider firmware, if I go through this process, I assume I will lose that as the .235 will not be the exact one I have installed, is that correct?
If so, I will sacrifice WiFi calling for Xposed, much rather have Xposed.
Mobfigurz said:
Appreciate the response. Ideally, I want to stay on 235 because I have WiFi calling with my network provider firmware, if I go through this process, I assume I will lose that as the .235 will not be the exact one I have installed, is that correct?
If so, I will sacrifice WiFi calling for Xposed, much rather have Xposed.
Click to expand...
Click to collapse
you might backup the VoLTE IMS profiles and check
system\etc\customization\modem
also check this out
https://forum.xda-developers.com/xp.../guide-enable-volte-operator-handset-t3816565
go on fella
---------- Post added at 05:16 PM ---------- Previous post was at 05:13 PM ----------
Uploaded!
https://drive.google.com/drive/folders/1_Tm7V7rHOxl0f8s0oQ4uTjmajt-7U7dT?usp=sharing