Related
Hello dear Lemon users!
I aquired this wonderful phablet a few weeks ago and started to tweak and experiment with it to get the most out of it.
I come from a ST25i (Xperia U) and am used to tweak and mod android phones.
But the only thread I've found was not organized or structured to aid and support those who know nothing about this phablet, mediatek or even android. Everything was spread around the massive number of posts, which always leads to users asking the same things over and over again.
So i decided to open this thread that i will keep updating with roms, recoveries, root methods, patches, tools, tutorials, etc...
ROMS
Flashable through SP FlashTools/Recovery
All Official ST/DEV/ROW Roms + OTA
ROW roms are flashable through SP Flash Tool, all the others are flashable through stock recovery or custom (you have to edit updater-script inside the meta-inf folder)
Flashable through SP FlashTools
VibeUI_Xancin
Source
A7000 137 ROW
Source
Flashable through CWM/TWRP
K50a40_S117_150706_ROW
Source
K3_Note_Xancin_Haier
Minimal GAPPS
Source
AOSP_CBT_HK_LIMITED
Source
SenSation_Rom
Source
AOSP_V4_XANCIN
Source
++LiMoNcHeLo 5.1 MDSTeam MoD++
PATCH
Source
++[LiMoNcHeLo NovAMoD MDSTeam VibeAosP]++
Source
Install this SMS app to fix the duplication of conversations due to incoming messages number having country prefix.
VibeUI_5.1_LTT_MDSTEAM
Source
VIBEUI_S137_ROW_LEMONADE
Source
Xperia_Mod_VibeUI_15_21
Source
Agujetas_vs_Reflex
Source
AOSP 5.1 by MDSTEAM (iOcean Rock Port)
Patch
Source
Carbon K3 Lite 2.5
Video Fix
Source
Lewa 6 (TCL M2M port)
Source
GACAMA AOSP v2.1_5.1
Source
Bestial Rom MDSTEAM
Ringtones patch
Source
Nexus ROM 5.1
Source
Haier 5.0
Source
360 Firmware OS from QIKU
Source
CoolUi 6.0 beta1 (Coolpad Dazen)
Source
Pekk3nDroid K3 1.0 AOSP (Androium 2.1.3 Based)
Source
Amigo OS 3.1.3
Source
VETA OS
Source
IUNI OS 5.18 pass: 092c
Source
SunRom V3.9
Patch
Delete Call Light Patch
Source
MIUI 7 6.1.30
Source
MIUI 7 7.1.1.0 Stable
Source
Flyme 5.6.2.1
Source
CM 12.1 Beta 3
Source
CM 12.1 PAC pass: 3361
Source
CM 12.1 SudaMod pass: 6f9f
Source
BlissPop v4.0.3
Source
Phoenix Rom 3 (Jiayu S3 Port)
Source
Vivo Funtouch 2.5
Source
EUI 5.5.037E
Source
VIBEUI_V3.5_1605_LTT_LEMONADE ANDROID 6.0 MM
Source
AOSP 5.1.1 LEMONADE V4
Contacts/Calendar Patch
Source
S205_VISNU_LEMONADE
Source
Androium 6
Source
LENOVO_K3_LOLLIPOP_5.0_S205_ROW_v1.17_CUOCO92
Source
04_K3_NOTE_5.1_1604_STABLE_ROW_004_CUOCO92
Source
Maremoto v2 (Jiayu Port)
Source
GReeNoiD v1.0
Source
K3_NOTE_MM_6.0_1610_3.40.1_v16_ROW_D_CUOCO92
Source
AOSP PURE BETA (Zopo Speed7 port) by pvkiniyan95
Source
OPEN SOURCE CODE
Android 5.0 Lollipop
Android 6.0 Marshmallow
Source
USEFUL LINKS
Lenovo Forum
Club Lenovo Forum
Mobile Uncle Forum
Loorin Forum
4PDA Forum
Movilesdualsim Forum
TUTORIALS
How to flash official VibeUI ST/DEV roms through custom recovery:
- You will need to edit the updater-script file inside the .zip
- Use 7zip to open the zip and go to \META-INF\com\google\android\updater-script
and drag the file out (same as copy/paste)
- Use Notepad++ to open it and edit the updater-script.
- Delete all the lines until:
show_progress(0.750000, 0);
ui_print("Patching system image unconditionally...");
- Save and replace the file dragging it into the 7zip window you left open.
- Flash the rom, ignore errors after the "Patching system image unconditionally..." message.
How to flash roms through SP Flashtool
How to flash recoveries through SP Flashtool
USB Drivers
USB Driver
Tools
ADB/Fastboot Automatic Recovery Install Tool
Extract folder, connect your phone to PC, run Recovery Install Tool.bat
You can flash any recovery, just replace the recovery.img file within the dir.
BaiduYunGuanjia VIP (English)
PC program to download large files from the chinese Baidu/Yunpan clouds. Run the self extracting file and afterwards run BaiduYunGuanjia.exe from within the extracted folder.
Root
Super SU
Flashable through recovery
SP Flash Tool
SP Flash Tool
Source
Recoveries
Recoveries Folder
Flashable through custom recovery, through SP Flashtool or directly through TWRP recovery using only the .img file.
Custom recovery - Just download any .zip, replace the recovery.img file within the .zip if you want another recovery using 7zip and flash it.
SP Flashtool - Just download the scatter.txt file and the recovery.img you want and flash it.
TWRP - Just download the recovery.img you want, select install in TWRP, install image, select the .img, mark the partition recovery and flash.
GAPPS arm64
Dirty Unicorns Gapps 5.1
OpenGapps
Source
Slim Gapps 5.0
Slim Gapps 5.1
Slim Gapps 6.0
Source
Flashable through TWRP/CWM recovery
XPOSED
5.0/5.1/6.0
Flashable through TWRP/CWM recovery
PATCHES/FIXES
Patched Boot Images
Flashable through TWRP recovery. Flash these to be able to boot in stock android 6.0 roms.
Patch for correcting offline charging screen in some roms
Flashable through TWRP/CWM recovery
Source
WiFi NVRam Error Fix
Copy the files in the zip to the same path, replace the ones there and set same permissions.
Invalid/Lost IMEI
Simply download this app, input your IMEIs, apply, reboot!
GPS Glonass Fix
Flashable through TWRP/CWM recovery (No wipes needed)
Source
MAXX Audio
Flashable through TWRP/CWM recovery (No wipes needed)
Source
Flashing removes Dolby Atmos and the toggle in the quick settings won't do nothing.
5GHZ Wifi Enabler
Enables the phone to pick up 5GHZ wifi frequencies.
MODEMS/RADIOS/BASEBANDS
Modems/Radios/Basebands All Versions
Flashable through TWRP/CWM recovery (No wipes needed)
Source
TWRP Backups
TWRP Backups Folder
Run the self extracting file and then copy the extracted folder to the dir of the backups of your TWRP recovery.
Enter recovery and restore. Reboot to system, enjoy...
All backups are rooted.
DUAL+ BOOT
Dual Boot Setup Procedure
Just in case...
2 other K3 Note resources:
http://forums.whirlpool.net.au/archive/2393953
http://www.needrom.com/category/lenovo/serial-k/k-50/
Guys get ready for AMIGO 3.5 from Gioneee Elife s7.. Really awesome rom.. uploading soon..
Can i flash the ROM directly on ROW version or i have to be on chinese Frirmware....?
hackerpower said:
Just in case...
Click to expand...
Click to collapse
which rom do you think is the best?(based on performance and minimal bugs)
How to port auto call record feature in limonchelo novamod ??
ifu said:
Can i flash the ROM directly on ROW version or i have to be on chinese Frirmware....?
Click to expand...
Click to collapse
The indian ROW rom has to be flashed via SP Flash Tool, so you can even format the whole phone before flashing it, no need to be on any rom prior to that.
daniel1112333 said:
which rom do you think is the best?(based on performance and minimal bugs)
Click to expand...
Click to collapse
The one i use, it's in my sig.
gurdeepsim said:
How to port auto call record feature in limonchelo novamod ??
Click to expand...
Click to collapse
Don't know, but i already saw that option in many other roms.
hello, can i flash the rom using FLASHIFY?? i think this is the easiest way to root and be in RECOVERY mode.
bitmappp said:
hello, can i flash the rom using FLASHIFY?? i think this is the easiest way to root and be in RECOVERY mode.
Click to expand...
Click to collapse
Which rom?
I don't know, ask the dev.
any rom under you Original post
bitmappp said:
any rom under you Original post
Click to expand...
Click to collapse
If it's possible it will only work with roms flashable through TWRP/CWM recovery, but i don't think it will work.
is there any way using wich we can chage wifi icon or hide wifi signal icon
gurdeepsim said:
is there any way using wich we can chage wifi icon or hide wifi signal icon
Click to expand...
Click to collapse
Gravity box module in Xposed.
Hi all, got my boy this today from gearbest uk, and I'm impressed with it so far. It came already rooted and with a couple of porn apps preinstalled lol, which i removed.
Anyway since it's already rooted i thought my plan of action would be to, install/run busybox, then install and use flashify to install custom recovery from the head post. Once done i would boot to custom recovery and install the recommended limochelli novamod rom, wiping off course.
Can anyone see any problems or am i good to go?
btw, great post, nice to see all needed info and files in one place
Which one is the best Rom for daily use....?
Added GPS Glonass Fix patch!! Now i catch russian sats Thanks AtlonX2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
:good:
Checkout the before and after SS attached.
meangreenie said:
Hi all, got my boy this today from gearbest uk, and I'm impressed with it so far. It came already rooted and with a couple of porn apps preinstalled lol, which i removed.
Anyway since it's already rooted i thought my plan of action would be to, install/run busybox, then install and use flashify to install custom recovery from the head post. Once done i would boot to custom recovery and install the recommended limochelli novamod rom, wiping off course.
Can anyone see any problems or am i good to go?
btw, great post, nice to see all needed info and files in one place
Click to expand...
Click to collapse
You're good! TY. Any doubts holla!
ifu said:
Which one is the best Rom for daily use....?
Click to expand...
Click to collapse
It depends on what you want/like, but IMO Limonchelo Novamod.
I hope that this is the right thread to post that there is a new Dev-ROM made by Lenovo:
VIBEUI_V2.8_1530_7.131.1_DEV_K50-T5 大小：M 更新日期：2015/07/23
Click to expand...
Click to collapse
Source: http://www.vibeui.com/vibeui/rom?key=k3 note
Changelog: (Google translation)
Recommend
★ Security Center: privacy mode function optimization, more in line with privacy requirements
★ System: Solving the one-handed fast, the display application searches when there is no problem
★ Gallery: solved in some cases, appears to stop running when you click on the album set of problems
Security center
Optimization - adjust privacy mode logic, more in line with user habits
(Reminder: Due to compatibility reasons, this upgrade is complete guest password and a master password would be transferred, but please understand)
Optimization - perfect UI interface, adding more options
Optimization - In private mode, visitors can not open the Security Center
System Settings
Repair - resolved quickly with one hand, the problem does not exist display applications search
Repair - solved on the phone IMEI number SIM card status missing issue
Repair - to solve the problem if you're mode after opening not work properly
Repair - solved under fast boot state, charging not boot problems
Broadcasting station
Repair - to solve some cases, the program cache all operation failure problem
Notification Center
Repair - to solve some cases, flashlight can not open question
Repair - solved in some cases, stop long running problem appear in a multitasking application
Topic Center
Repair - to solve the English state, the theme central search interface layout irregular issue
Repair - solved in some cases, cause the phone Caton abnormal problems occur Topic Center
Repair - to solve the theme center, stop running problems downloading other users sharing wallpaper after
Repair - to solve the click history wallpaper unusual problems
Repair - solve appears to stop running after changing font problems
Repair - to solve the anomalies clicking topic I share a problem
Gallery
Repair - resolved after using the software to save the image, the picture can not find a problem in the album
Repair - solved in some cases, stop running problems click on the album is set
Lenovo Contacts
Repair - resolved in the English state, set the contact picture is not the first letter capitalized issues
Repair - to solve the problem of information recipients background color and text color conflict
Repair - solved in some cases, for a long time can not open the contact problem
Repair - can not solve the bright screen problem after call
Party applications
Repair - to solve the Postal Savings Bank, Agricultural Bank of mobile client can not properly use the
Repair - to solve the problem of incompatibility baby online
Click to expand...
Click to collapse
In the following Source of this changelog you will also find a little video about it in Chinese and I guess here you learn [HowTo] download the ROM.
I don't own a K3 Note, I am just reading because I am interested. But I hope this could help anybody.
MerenQue said:
I hope that this is the right thread to post that there is a new Dev-ROM made by Lenovo:
Source: http://www.vibeui.com/vibeui/rom?key=k3 note
Changelog: (Google translation)
In the Source you will find a little video about it in Chinese and I guess here you learn [HowTo] download the ROM.
I don't own a K3 Note, I am just reading because I am interested. But I hope this could help anybody.
Click to expand...
Click to collapse
Please don't make posts like this, i already know a new 1530 dev rom is out.
Thank you for your understanding.
If you would like to help me, tell me something i don't know via PM. The link you posted to learn how to download is the link to the tutorial how to use the OTA apk and switch from ST to Dev versions.
This thread has a Q&A thread, use it.
BTW here's the modem/baseband of the new 1530 dev: https://drive.google.com/open?id=0B5oTMOqjH0_TckpURFZPZ0xPVnM
I will post all the modems from all the versions in the OP asap.
Here's the link with all the ST/Dev versions to date and to the OTA apk: http://bbs.lenovo.com/forum.php?mod=viewthread&fid=921&tid=557109
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 6 (marshmallow), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
What's working :
Boots
Touch
RIL [Calls, Mobile Data]
Wi-Fi
Wi-Fi Hotspot
Bluetooth
Camera
Audio
Sensors
Fingerprint
Flash
GPS
NFC
Known issues:
VoLTE doesn't work.
LED.Note: You can use LED with this awesome method: https://forum.xda-developers.com/lenovo-p2/themes/lenovo-p2-rooted-custom-led-t3589859
This is the one of the first builds for p2a42, so minor bugs are expected.Please report them if any.
Instructions :
Flash Twrp :- LINK
Download the latest build and GApps
Reboot to recovery
Flash the latest build and GApps
Reboot
Downloads :
Latest build [19/06/2017]: https://mega.nz/#!KgcS1boY!f1veK_D-kw_8WYDMD9Id0qytacZuHVN3xvQzB7t0SP0
Google Apps: http://opengapps.org/
Credits :
One Team Forum
XDA:Rom Information
LineageOS 14.1,p2a42, ROM for the Lenovo P2
Contributors
wzedlare
ROM OS Version: 7.1.x Nougat
Version Information
Status: Stable
Created 2017-03-18
Last Updated 2017-06-19
#rezerved for me
How to install Root for Apps on Android Nougat Custom Rom
Download and transfer the Lineage SU addon zip file from the download link above to your device’s storage.
Boot your device into TWRP recovery.
Tap on Install and select the Lineage SU addon zip file that you transferred to your device in Step 1.
After selecting the .zip file, do Swipe to Confirm Flash on the bottom of screen to begin the flashing process.
Once Lineage SU addon is flashed, you’ll get Reboot System option, select it.
How to Enable Root for Apps on Lineage OS
Once you’ve installed the Lineage SU addon zip, do the following to enable root for Apps on Lineage OS:
Enable Developer options: Go to Settings » About phone » Tap seven times on Build number.
Go back to Settings main menu and open Developer options from there.
Look for Root access setting, and set it to Apps and ADB or Apps only, as per your need.
That’s all. Your Android device running on Lineage OS should have full root access for apps now.
If you ever need to disable root access, just go to Settings » Developer options » Root access and select the Disabled option from there.
Download;
addonsu-arm64-signed.zip
Great job, no idea how you build new kernel 3.18.31 for lineage14.1
Thank You!
i want to Root LOS 14.1
is it the same way?? or should i do anything more??? !!
i am thinking of SystemRoot..
please give your suggestions ..
nandakis4 said:
i want to Root LOS 14.1
is it the same way?? or should i do anything more??? !!
i am thinking of SystemRoot..
please give your suggestions ..
Click to expand...
Click to collapse
LineageOs AdeenSu
Download And Flashing
Developer Setting>Root
@wzedlare kindly you fix framework folder, it look so ugly with boot oats and boot arts, i have file folder framework to manage throw thems, but make home button not wake up the screen light when it pressed, i hope it will be fix for next release
Thanks! Very good job. It may be crazy but I think I stay with Android 6, because I love the led notifications.
But maybe I will flash it, because who give a F?
Do you need to format as ext4 or other filesystem?...
Will my SD work, it's exfat??
---------- Post added at 13:27 ---------- Previous post was at 13:16 ----------
hendibudi said:
@wzedlare kindly you fix framework folder, it look so ugly with boot oats and boot arts, i have file folder framework to manage throw thems, but make home button not wake up the screen light when it pressed, i hope it will be fix for next release
Click to expand...
Click to collapse
Why not fix it yourself?
hendibudi said:
@wzedlare kindly you fix framework folder, it look so ugly with boot oats and boot arts, i have file folder framework to manage throw thems, but make home button not wake up the screen light when it pressed, i hope it will be fix for next release
Click to expand...
Click to collapse
They(boot.oat) are being generated automatically if you compile any custom rom.Home button wakes up the device, I won't disable that feature.It is useful for everyone.
ilmervanhattem said:
Thanks! Very good job. It may be crazy but I think I stay with Android 6, because I love the led notifications.
But maybe I will flash it, because who give a F?
Do you need to format as ext4 or other filesystem?...
Will my SD work, it's exfat??
---------- Post added at 13:27 ---------- Previous post was at 13:16 ----------
Why not fix it yourself?
Click to expand...
Click to collapse
You don't have to format anything.Just make your wipes and flash it.
ilmervanhattem said:
Thanks! Very good job. It may be crazy but I think I stay with Android 6, because I love the led notifications.
But maybe I will flash it, because who give a F?
Do you need to format as ext4 or other filesystem?...
Will my SD work, it's exfat??
---------- Post added at 13:27 ---------- Previous post was at 13:16 ----------
Why not fix it yourself?
Click to expand...
Click to collapse
I am sorry, i just junior member on xda, i didn't mean that, i just want to give little contribution to revive our community user p2 experience
WiFi is not working here...
When I turn on WiFi it turns off instantly...
Fawk
I've used the 'super' version of gapps for 7.1 (64bits) btw. Also tried it with TWRP 3.0.2.0 and the aroma installer of gapps, same WiFi error.
Hi there, i am thinking of buying this device for my gf because she needs something with a ****load of battery power. So this device seems the obvious choice. But i have a question:
i noticd that on every rom there is no led and no fingerprint. Is this something that will be added in the future or is it not possible due to unavailabe firmwares?
Kind regards
DDQW said:
Hi there, i am thinking of buying this device for my gf because she needs something with a ****load of battery power. So this device seems the obvious choice. But i have a question:
i noticd that on every rom there is no led and no fingerprint. Is this something that will be added in the future or is it not possible due to unavailabe firmwares?
Kind regards
Click to expand...
Click to collapse
I couldn't fix them, that's my fault.It is not caused by firmware or something.I don't know what will happen in the future.
ilmervanhattem said:
WiFi is not working here...
When I turn on WiFi it turns off instantly...
Fawk
I've used the 'super' version of gapps for 7.1 (64bits) btw.
Click to expand...
Click to collapse
Flash stock rom and use it for ten minutes, wipe data,system,cache,dalvik cache (don't wipe your internal storage, wiping it causes bugs.), then flash the rom.
wzedlare said:
Flash stock rom and use it for ten minutes, wipe data,system,cache,dalvik cache (don't wipe your internal storage, wiping it causes bugs.), then flash the rom.
Click to expand...
Click to collapse
OK my friend.
Got some error and passcode error when restoring. Will try some things and talk to you later.
UPDATE: wifi is working but have to root.
UPDATE: Rooted with version 2.79
UPDATE: Now restoring 484 apps with Titanium Backup
UPDATE: ROM is working smooth af, for how much I experienced by now
i was wondering why i couldnt get gapps to install , then realised i was trying to install the wrong version lol
The Mero said:
i was wondering why i couldnt get gapps to install , then realised i was trying to install the wrong version lol
Click to expand...
Click to collapse
7.1 > arm64 > choose whatever you want, pico is the smaller zip.
cpu-z is saying governor is stuck on performance .. constantly running at 2016mhz on all cores .
Is it possible to change it to dynamic ?
The Mero said:
cpu-z is saying governor is stuck on performance .. constantly running at 2016mhz on all cores .
Is it possible to change it to dynamic ?
Click to expand...
Click to collapse
Use a kernel editor?
which one would be safe / recommend to use ilmervanhattem ?
I wouldnt have a clue where to start ,
Announcement:
Code:
[LIST]
[B]V1.6 is now available[/B]
[/LIST]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Resurrection Remix 5.8.5 FINAL Zormax [OPTIMIZED]Lenovo A7010(A7010a48)
Code:
#include
/*
* Your warranty is now void.
* And other random stuff no-one reads.
*/
Heres the official thread of the ROM
http://lenovo-forums.ru/topic/23481...mix-583-android-71-custom-rom/#comment-549294
----------------------------
?Version 1.6 Final Download Link
?Alternative Link
By Helton Vezzoni (G+)
?GDrive
?https://drive.google.com/file/d/0B5KCs6JXlcE7b05ZZVVFRFQtNk0/view?usp=sharing
-----------------------------
If you want to flash this, just go to link given in top to read instruction, flashing procedures is not be like in mohan's roms and anything you try. Better to visit official lenovo ru link for more information.
[*]Flashing RROS v1.1UP rom (recommended boot2sd.img and System.img)
[*]Tick flash zip, flash system to system image, bootsd to boot
[*]After that, flaash recoveryN1
[*]target partition to recovery then reboot to recovery
[*]Flash addons gapps or download mini gapps, if you want root flash su
[*]reboot to system
---------------------------------------------------------------------------------------------------------------------------------------------------------------------
Upgrade from new build? Here
* Flash system to system img
* Flash gapps (newer version) and root (magisk or su)
* If you have mods on last build, flash it (Dolby, Magisk, Song Framewrk etc.)
* Wipe cache and dalvik
* Reboot
* Done
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------
Note!
[*]Dont go back from any old twrp, this might be removed your existing twrp recovery, stay on 3.1.1 by sevenmaxs
[*]If you want to go back to old twrp, just flash any nougat/marsh roms that not came from zormax (los13 is not like this), after you go back to other rom, you can now change your curent rom to gold or any you want twrp recovery build.
[/B]
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
New Fixes
Discover: 05-23-17
Problems:
* If you flash twrp gold in latest sevemaxs 3.1.1 twrp and youre running in RROS Zormax, your current twrp will gone after you reboot.
Fixed
* If you got this problem, just flash recoveryN1 (Replace name to recovery.img) via ADB, if you know how to flash the twrp just go, if you dont know search on tutorial on youtube.
Issues:
* TWRP 3.1.1 is the only custom recovery can support in this ROM, so if you replace or flash any recovery that not came by zormax, your TWRP will gone.
*
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------
DualBootPatcher Support (Not officially supported by developer)
* If you have problem to adding this rom in Dualbootpatcher, you may add this in the end of build prop
Add "ro.patcher.device=A7010a48" to end of your build.prop,
save and reboot
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------
MOD's
Dolby Atmos from Ahrion>https://forum.xda-developers.com/android/apps-games/soundmod-axon-7-dolby-atmos-t3412342
Dolby r6.5
Magisk 13.0>https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Changelog:
Code:
[LIST]
[B]
New Update 1.6
1. Added Ambient Display Patched
- Security patches as of September 5 blueborne
2. PA ColorEngine (Theme)
3. 5.8.5 Tag
V1.5
1. Updating the RR to version 5.8.4
2. Security patch from August 5
3. RR code of August 27
4. Ambient Display (Lite version)
5. New settings in "Advanced settings"
6. New libraries of cameras
7. New application "Camera" with improved mode of video recording in low light, pause during video shooting and other parameters
8. Stereo audio recording during video recording (not tested)
V1.4
* Fix sim2 signal
* Synchronize latest RROS changes
V1.3
* New camera libs
* USB Tethering fixed
* RR Sync (06=23)
V1.2
* Merged Android_7.1.2-r17
* June Security patch
* New camera libs
* Add VR mode
* Fixed Night Mode (Nightlight)
* Added powerprofile patch
* Wifi Display
* Synchronize latest rros and los changes (06-15-17)
V1.1
- Offline charging / charging fixed
- Priority of LED notifications
- Support for MTP in recovery
- New GPS Driver
- Support for ANT +
- Updating the RR code from 05/26/2017
- On the lock screen, in real time shows the current and charge voltage:
[/B]
[/LIST]
Creditos:
Zormax -Official OP
Version Information
Resurrection Remix ROM by Zormax, for A7010 & K4 Note
ROM Updated: 08-28-17
Thread Updated: 06-28-17
Author/Developer : @Zormax
Based On : Nougat LineageOS
Thread Created : 05-21-17
Is the fingerprint not working???
Guys,
Im on now in this rom, i will give feedback after several testing.
Thankyou,..
So far all is ok
* Camera with all 13MP/8MP with 16:9/4:3 ratio
* Network is working
* Wifi is working
* Video recording is fully working
* Fingerprint is working
* GPS is working
* Compass is working
* Overall sensors is working
other stuff is working like on stock
idk if Calling/in-call/received messages/incoming messages is working, but i think is working
I send my SC after i restore my titanium backup!!
SYSTEM UI CRASH- after i restore backup from titanum and reboot... idk why.. i send a report to zormax..
edarick said:
So far all is ok
* Camera with all 13MP/8MP with 16:9/4:3 ratio
* Network is working
* Wifi is working
* Video recording is fully working
* Fingerprint is working
* GPS is working
* Compass is working
* Overall sensors is working
other stuff is working like on stock
idk if Calling/in-call/received messages/incoming messages is working, but i think is working
I send my SC after i restore my titanium backup!!
SYSTEM UI CRASH- after i restore backup from titanum and reboot... idk why.. i send a report to zormax..
Click to expand...
Click to collapse
Hai ..can you pls tell me the installation procedure for this rom
Ganesh.V said:
Hai ..can you pls tell me the installation procedure for this rom
Click to expand...
Click to collapse
1. Make the backup: system, data, not boot, recovery
2. For those who want a USB flash drive in the system, only the external (internal space will be involved under all application), then you have to move everything from the internal to the external USB drive.
3. Download the firmware, download the addon.
5. Extract both archives and put them on the external card contents.
6. Reboot into recovery.
7. Making wipes are: dalvick, data, cache, system (and if nvdata recovery 3.0.2-3 and above)
8. Set "as the img" after recovery: boot_2sd.img as the "Boot" and system.img as the "System image", for those who want one card in the system, set boot_1sd.img - for a place boot_2sd.img
9. Also, be sure to put a new recovery: recoveryN1.img
10. In recovery main menu, do a reboot back into recovery.
11. Install open_gapps ******. Zip and ROOT_SuperSU *****. Zip
12. loaded in the system set up.
abidifethi said:
1. Make the backup: system, data, not boot, recovery
2. For those who want a USB flash drive in the system, only the external (internal space will be involved under all application), then you have to move everything from the internal to the external USB drive.
3. Download the firmware, download the addon.
5. Extract both archives and put them on the external card contents.
6. Reboot into recovery.
7. Making wipes are: dalvick, data, cache, system (and if nvdata recovery 3.0.2-3 and above)
8. Set "as the img" after recovery: boot_2sd.img as the "Boot" and system.img as the "System image", for those who want one card in the system, set boot_1sd.img - for a place boot_2sd.img
9. Also, be sure to put a new recovery: recoveryN1.img
10. In recovery main menu, do a reboot back into recovery.
11. Install open_gapps ******. Zip and ROOT_SuperSU *****. Zip
12. loaded in the system set up.
Click to expand...
Click to collapse
Thank you...
In this rom, can we switch the network to lte only, or 3g only? Because in the other cusroms i can't do that.
Ask
abidifethi said:
1. Make the backup: system, data, not boot, recovery
2. For those who want a USB flash drive in the system, only the external (internal space will be involved under all application), then you have to move everything from the internal to the external USB drive.
3. Download the firmware, download the addon.
5. Extract both archives and put them on the external card contents.
6. Reboot into recovery.
7. Making wipes are: dalvick, data, cache, system (and if nvdata recovery 3.0.2-3 and above)
8. Set "as the img" after recovery: boot_2sd.img as the "Boot" and system.img as the "System image", for those who want one card in the system, set boot_1sd.img - for a place boot_2sd.img
9. Also, be sure to put a new recovery: recoveryN1.img
10. In recovery main menu, do a reboot back into recovery.
11. Install open_gapps ******. Zip and ROOT_SuperSU *****. Zip
12. loaded in the system set up.
Click to expand...
Click to collapse
Bro, what the mean exactly, i dont understand step no 2 and 8 ??
support a7010a48 ?
lek669 said:
support a7010a48 ?
Click to expand...
Click to collapse
Yes..try it
Sc
Awesome ROM N
Some Feedback for Awesome ROM i've tasted
1. I've faced rotation not work, tried turn on and turn off still not work, wipe and restarts 3 time still not work, please fix bro,
2. There's no ambient display, hoping present in next update
I love this ROM, sound speaker is amazing like stock ROM when I flash Dolby atmost,
hoping you release new version withaut anything change in SoundMod, 'cause its great
Thanks for amazing rom
Imam mustofa said:
Some Feedback for Awesome ROM i've tasted
1. I've faced rotation not work, tried turn on and turn off still not work, wipe and restarts 3 time still not work, please fix bro,
2. There's no ambient display, hoping present in next update
I love this ROM, sound speaker is amazing like stock ROM when I flash Dolby atmost,
hoping you release new version withaut anything change in SoundMod, 'cause its great
Thanks for amazing rom
Click to expand...
Click to collapse
Post your report in official dev page.. go to page 1
edarick said:
Post your report in official dev page.. go to page 1
Click to expand...
Click to collapse
In lenovo.forum??
Imam mustofa said:
In lenovo.forum??
Click to expand...
Click to collapse
Yeah
Android O Sub theme
edarick said:
Android O Sub theme
Click to expand...
Click to collapse
Bro can you rotate phone? Tried Play Movie from MXplayer is not work
Rotation is not working (2/32GB variant) any idea?
Here is the sc of rotation
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Introduction
MultiROM is one-of-a-kind multi-boot mod for K6 power. It can boot any Android ROM as well as other systems like Ubuntu Touch, Plasma Active, Bohdi Linux or WebOS port, once they are ported to our device. Besides booting from device's internal memory, MultiROM can boot from USB drive connected to the device via OTG cable. The main part of MultiROM is a boot manager, which appears every time your device starts and lets you choose ROM to boot. You can see how it looks on the left image below and in gallery. ROMs are installed and managed via modified TWRP recovery. You can use standard ZIP files to install secondary Android ROMs, daily prebuilt image files to install Ubuntu Touch and MultiROM even has its own installer system, which can be used to ship other Linux-based systems.
Features:
* Multiboot any number of Android ROMs
* Restore nandroid backup as secondary ROM
* Use for example Ubuntu Touch or Desktop alongside with Android, without the need of device formatting, once they are ported to the Moto X Play
* Boot from USB drive attached via OTG cable
Warning!
It _is_ dangerous. This whole thing is basically one giant hack - none of these systems are made with multibooting in mind. It is messing with boot sector and data partition. It is no longer messing with data partition or boot sector, but it is possible that something goes wrong and you will have to flash factory images again. Make backups. Always.
Installation
1. Via MultiROM Manager app (We do not have Official Support, so this is not an option for us yet)
This is the easiest way to install everything MultiROM needs. Install the app and select MultiROM and recovery on the Install/Update card. If the Status card says Kernel: doesn't have kexec-hardboot patch! in red letters, you have to install also patched kernel (If you want to use Kexec) - either select one on the Install/Update card or get some 3rd-party kernel here on XDA. You are chosing kernel for your primary ROM, not any of your (future) secondary ROMs, so select the version accordingly.
Press "Install" on the Install/Update card to start the installation.
2. Manual installation
Firstly, there are videos on youtube. If you want, just search for "MultiROM installation" on youtube and watch those, big thanks to all who made them. There is also an awesome article on Linux Journal.
MultiROM has 3 parts you need to install:
Modified recovery (TWRP.img) - download the IMG file from second post and use fastboot, TWRP or Flashify app to flash it.
Patched kernel - you can find it in the second post. Download the ZIP file and flash it in recovery. You can use any 3rd-party kernel which include the patch.
MultiROM (multirom.zip) - download the ZIP file from second post and flash it in recovery.
You current rom will not be erased by the installation.
Adding Roms
1. Android
Go to recovery, select Advanced -> MultiROM -> Add ROM. Select the ROM's zip file and confirm.
Using USB drive (not tested yet)
During installation, recovery lets you select install location. Plug in the USB drive, wait a while and press "refresh" so that it shows partitions on the USB drive. You just select the location (extX, NTFS and FAT32 partitions are supported) and proceed with the installation.
If you wanna use other than default FAT32 partition, just format it in PC. If you don't know how/don't know where to find out how, you probably should not try installing MultiROM.
If you are installing to NTFS or FAT32 partition, recovery asks you to set image size for all the partitions - this cannot be easilly changed afterward, so choose carefully. FAT32 is limited to maximum of 4095MB per image - it is limitation of the filesystem, I can do nothing about that.
Installation to USB drives takes a bit longer, because the flash drive is (usually) slower and it needs to create the images, so installation of Ubuntu to 4Gb image on my pretty fast USB drive takes about 20 minutes.
Enumerating USB drive can take a while in MultiROM menu, so when you press the "USB" button in MultiROM, wait a while (max. 30-45s) until it searches the USB drive. It does it by itself, no need to press something, just wait.
Updating/changing ROMs
1. Primary ROM (Internal)
Flash ROM's ZIP file as usual, do factory reset if needed (it won't erase secondary ROMs)
Go to Advanced -> MultiROM in recovery and do Inject curr. boot sector.
2. Secondary Android ROMs
If you want to change the ROM, delete it and add new one. To update ROM, follow these steps:
Go to Advanced -> MultiROM -> List ROMs and select the ROM you want to update.
Select "Flash ZIP" and flash ROM's ZIP file.
In some cases, you might need to flash patched kernel - get coresponding patched kernel version from second post and flash it to the secondary ROM sama way you flashed ROM's ZIP file.
Explanation of recovery menus
Main menu
- Add ROM - add ROM to boot
- List ROMs - list installed ROMs and manage them
- Inject boot.img file - When you download for example kernel, which is distrubuted as whole boot.img (eg. franco kernel), you have to use this option on it, otherwise you would lose MultiROM.
- Inject curr. boot sector - Use this option if MultiROM does not show up on boot, for example after kernel installation.
- Settings - well, settings.
Manage ROM
- Rename, delete - I believe these are obvious
- Flash ZIP (only Android ROMs) - flash ZIP to the ROM, for example gapps
- Add/replace boot.img - replaces boot.img used by this ROM, this is more like developer option.
- Re-patch init - this is available only for ubuntu. Use it when ubuntu cannot find root partition, ie. after apt-get upgrade which changed the init script.
Source code:
MultiROM - https://github.com/multirom-dev
Downloads :
[*] 2017-11-20: Flashable ZIP
MultiROM TWRP Image
FAQ and other notes
Device encryption:
Encryption isn't supported right now. So decrypt your device before using this.
About security
In order to make multi-booting possible, MultiROM has to sacrifice some security measures. Firstly, on secondary Android ROMs, /system is not mounted read-only. While there are other things preventing malicious software from messing with /system, this might potentialy make it easier for such software to attack that system.
What do the ROMs share?
All ROMs are separate, except /sdcard, which is shared between all Android ROMs.
How many ROMs can I have?/Where are the ROMs stored?
You can have as many ROMs as you can fit in your /sdcard. All the ROMs are stored in /sdcard/multirom/roms or on an USB drive. This folder is unaccessible in Android, to prevent mediascanner from scanning it. You can either in recovery, or obtain root and go to /data/media/0/multirom/roms.
The menu with all the ROMs won't show up during boot, how to fix it?
Either re-flash the MultiROM zip or go to recovery, Advanced -> MultiROM -> Inject curr. boot sector.
The reason for this is that something rewrote your boot.img, which happens for example when you flash a kernel. MultiROM's boot menu is part of the boot image, so it has to be added into it again.
Can I flash secondary roms on Micro SD?
Yes but it's is very slow, internal storage is much better to flash secondary roms.
How do I flash Gapps in Secondary ROMs?
After AddRom and is done, go back and Click on the installed Secondary ROM, you will see one of the option to 'Flash Zip', click and install Gapps. Then you can reboot into secondary ROMs, do gapps installation before rebooting otherwise as usual need to deal with SetupWizard FC, at least thats what I observe in my device.
Reserved.
At last my multi-rom is available for redmi 4x now can test many roms .
What is the difference between dual boot patcher and this . Dual boot patcher is much easier to use .This is so complicated
Wasef x said:
What is the difference between dual boot patcher and this . Dual boot patcher is much easier to use .This is so complicated
Click to expand...
Click to collapse
Sorry but this isn't true...
I tried DBP and it is definitely more complicated than MultiROM.
Driv said:
Sorry but this isn't true...
I tried DBP and it is definitely more complicated than MultiROM.
Click to expand...
Click to collapse
What ... It work or no ... ?
Sent from my Redmi 4X using Tapatalk
Tested it . Booted Dot os as secondary . Working Flawlessly . And yes.. If I think of an amateur user , It is easier than Dual boot patcher as @TingyiChenchen provided the twrp and the flashable zip . One just have to flash them . And boom ...Add roms as you wish .
N.B. Never ever update magisk or any flashable zip from the added roms . Always boot into recovery ..go to the rom and chhose the option add zips .
And make sure you have backed up system and system image before messing up with This .
Hit Thanks if I helped or If you need a video tutorial .
How to encrypt? I had to format my whole phone + internal memory.
How to make rom in external storage is visible?
When I set fingerprint in primary rom, secondary rom delete this. Please, fix this issues!
Thank You for making this happen on santoni.. But i think it still need a little fix.. I'm facing two problems..
1. If i make password or FP for lockscreen on second rom.. On first rom we couldn't use password or pattern that we've entered.. It change by it self..
2. After sometimes.. We couldn't boot to second rom anymore.. It's stuck on boot logo
I hope it could be fixed on next update.. Take your time.. Thanks for the effort.. Thanks for this MultiRom
How to delete 2 roms ? And all multitom?
Wasef x said:
Tested it . Booted Dot os as secondary . Working Flawlessly . And yes.. If I think of an amateur user , It is easier than Dual boot patcher as @TingyiChenchen provided the twrp and the flashable zip . One just have to flash them . And boom ...Add roms as you wish .
N.B. Never ever update magisk or any flashable zip from the added roms . Always boot into recovery ..go to the rom and chhose the option add zips .
And make sure you have backed up system and system image before messing up with This .
Hit Thanks if I helped or If you need a video tutorial .
Click to expand...
Click to collapse
Thank you for sharing information. I have 2 questions:
1. Any conflict with primary rom like rr which integrated magisk? What would happen if I add/remove modules in magisk manager?
2. If I enabled the File Based Encryption (FBE) feature in the primary rom, which means the whole /sdcard/ is encrypted until I input password or draw gesture before boot up. Can I use MultiROM still (show OS menu and load secondary rom after I input password or draw gesture )
Thanks!
@TingyiChen can you share multirom device tree?
Edit: no need I have done it with help from Madd_Maxx
My secondary Rom won't boot!!
Give me link Patch kernel hardboot kexec for Redmi 4x ,thanks
Impossible to get a working MultiRom Manager by TWRP flashing V33 santoni zip
Though many posts for Xiaomi Redmi 4x (Santoni) do declare that MultiRom Manager works, I experience a serious problem with installation.
MultiRom.apk always says incompatible device (Santoni).
So I tried the 2 provided files. TWRP Multirom Recovery successfully flashed but no luck with "multirom-20171120-v33-UNOFFICIAL-santoni.zip".
Flashing the MultiRom Mgr application (customised for Santoni?) never get installed. This is my main problem.
Please advice!
NB1: Concerning the Encryption issues with MIUI devices I did manage to solve it and get a full TWRP device backup (including my data!) by flashing image "twrp_santoni_oreo.img" available around.
Its TWRP version is 3.1.1-8.0.
nice project
Kernel
Wasef x said:
Tested it . Booted Dot os as secondary . Working Flawlessly . And yes.. If I think of an amateur user , It is easier than Dual boot patcher as @TingyiChenchen provided the twrp and the flashable zip . One just have to flash them . And boom ...Add roms as you wish .
N.B. Never ever update magisk or any flashable zip from the added roms . Always boot into recovery ..go to the rom and chhose the option add zips .
And make sure you have backed up system and system image before messing up with This .
Hit Thanks if I helped or If you need a video tutorial .
Click to expand...
Click to collapse
Please give me the link of your kernel
Asylum Note_FE Exclusive
Ported from [J5Prime][NoteFE Port Exclusive]G570F/Y[Stable] @AlexVolzsk
J3 20017
SM-J330F--F/DS--OK!
SM-J330G--No!!!
SM-J330FN--OK!
Rom You can use without Root with StockKernel included from version J330FXXU3ARC5
To use with Mutant Kernel Permissive-included--Root required
With Mutant Kernel must work on models SM-J330F, SM-J330F/DS,SM-J330FN
Important for users which install the firmware not over version J330FXXU3ARC5--If you want to use Stock Kernel without Root:
in Aroma choise Stock ,if after install Rom not start --need Restore from your Backup Stok Rom in TWRP only Boot partition and Rom must start.
Changelog:
-Deknox
-Deodex
-Debloat
-Zipalign
-Aroma
You can choise in Aroma
-Mutant Kernel Permissive-included--Root required
- Stock-3ARC5-Kernel--You can use without Root
- Root-SuperSuPro or No Root
--Applications
-------------
-Changelog-
--Camera last with more function
--Samsung Cloud
--Floating Messages
--Live messages
--Long screenshot
--The function of capturing the area of the screenshot (EDGE panel)
--Application signature verification disabled
--Fashion weather
--Clock center / left / right
--About 1000 battery icons
--E-clock / horiz.
--Wifi and network icons - left / right
--Unlocking the OEM is activated and removed from the settings
--SystemUI Tuner (activated by pressing and holding the gear in the curtain)
--Games
--Lock apps
--Using data in the blind
--Removed unnecessary items from settings
--Multi-user mode activated
--Updated to the latest version of the camera
--Extended reboot menu
--Vibration soft keys (settings, sounds and vibration, feedback)
--Flashlight with the volume key when the screen is locked (Settings, eb and security, show information.)
--All fixes are sewn (floating messages and access to the map)
--Keyboard halo (languages can not be downloaded)
--New icon 4g / lte
--Added a shadow to the clock in the left / center position (now on a light background they are at least as visible)
--Applications from S9 - messages, optimization, weather, playmarket and more what I do not remember ...
--Sounds, ringtones added \ replaced by sounds from S9
--Smaller edits of the weather widget
--Locking the screen "Double Tap" + many more actions to choose from (search in the display settings)
--Dialer with enlarged square photo
--Network speed in the status bar with a choice in the settings (ibid.)
--Added applications to choose from in the aroma installer
--Curtain: color, style and font
--Blur in the blind
--Blurs in the menu of recent (many settings)
--Extended curtain grid curtains
--Active message "clear all" in the "do not disturb"
--Notification form for choice
--Switching tracks with volume buttons
--Extended choice of animation scale
--SFinder in curtains
...etc
Install:
Install from TWRP.
Put .zip in sd card
Before install i recomend make backup to externall sd card and then 5 wipes ,without SD card
Follow Aroma instruction,you can choose options
!!!Important notice !!!
After installation go to the settings, display and change the screen resolution first to 1080, and after we return to our 720
Download:
Asylum Note_FE Exclusive
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
!!!Important notice !!!
After installation go to the settings, display and change the screen resolution first to 1080, and after we return to our 720---------------------
ROM OS Version: 7.0.x Nougat
ROM Kernel: Linux 3.18.14
ROM Firmware Required: Stock Nougat Android 7.0
Statusrom: Stable
---------------------
Credits:
@AlexVolzsk
@tutibreaker
@JulienBfc-Aroma installer
2018.05.28
Reuploaded Final version .Now you coa use this Rom without Root with Stock 3ARC5 kernel
Additional applications
------
Bixby Home
View attachment Bixby.zip --Install from TWRP
.......
My Aroma Installer ?
But else great ROM ?
The smj330g and smj330f are almost exactly the same so would this room work on both.
differences: https://m.gsmarena.com/compare.php3?idPhone1=8438&idPhone2=8438#j330f-ds,j330g-ds
LeeTG3 said:
The smj330g and smj330f are almost exactly the same so would this room work on both.
Click to expand...
Click to collapse
It is necessary to test
With Mutant Kernel must work on models SM-J330F, SM-J330F/DS,SM-J330G,SM-J330FN
If you want to use Stock Kernel without Root ,then in Aroma choise Stock ,if after install Rom not start --need Restore from your Backup Stok Rom in TWRP only Boot partition and Rom must start -- This is just a theory-Practically you need to try
lemlis said:
It is necessary to test
With Mutant Kernel must work on models SM-J330F, SM-J330F/DS,SM-J330G,SM-J330FN
If you want to use Stock Kernel without Root ,then in Aroma choise Stock ,if after install Rom not start --need Restore from your Backup Stok Rom in TWRP only Boot partition and Rom must start -- This is just a theory-Practically you need to try
Click to expand...
Click to collapse
I probably won't test it for a month because that's when my warranty expires, I have just been keeping an eye on here for when it does.
---------- Post added at 08:59 PM ---------- Previous post was at 08:55 PM ----------
I don't want to root my phone because of this.
https://forum.xda-developers.com/galaxy-j3-2017/how-to/oreo-update-t3762265
if my phone gets Oreo I want to be able to update.
Thanks for this ROM!!!
I still waiting for a custom rom or some else for Samsung J3 SM-327U
Help
I've tried to flash my j330G with this Rom, and for one hour my phone can't start normally and just stuck on code binaries with restart not only several time but also many times. Please help me to fix this
adipatihalim said:
I've tried to flash my j330G with this Rom, and for one hour my phone can't start normally and just stuck on code binaries with restart not only several time but also many times. Please help me to fix this
Click to expand...
Click to collapse
Can you still boot it to twrp?
Yeah ... i can, is there ane effect?
The rom is promising but it just doesn't work at all, i'm on a J330F and i get stuck on the custom boot logo.
sskss said:
i'm on a J330F and i get stuck on the custom boot logo.
Click to expand...
Click to collapse
I'm on a J330F and use this rom 20 days. there is no problem at all.everything works perfectly.
In my opinion, this is the best Rom j330 for that moment.
It even works on J330FN, still using it.
lemlis said:
I'm on a J330F and use this rom 20 days. there is no problem at all.everything works perfectly.
In my opinion, this is the best Rom j330 for that moment.
Click to expand...
Click to collapse
I have tried every single possible way to install this ROM, i even tried your other Port from A3 and it just goes back to the boot logo whenever it finishes with updating the applications (the green android screen that comes after the boot logo). You should probably post a detailed info about what Stock ROM we should be in before using this Custom ROM and the steps.
Thank you
sskss said:
You should probably post a detailed info about what Stock ROM we should be in before using this Custom ROM and the steps.
Click to expand...
Click to collapse
All info posted #1 post
1.i flash over Stock ROM J330FXXU3ARC5
2.If you use Mutant Kernel--you must use with Root-without root Mutant Kernel not work.
To use with Mutant Kernel --Root required
3.Before install make backup to externall sd card and then 5 wipes ,without SD card
lemlis said:
All info posted #1 post
1.i flash over Stock ROM J330FXXU3ARC5
2.If you use Mutant Kernel--you must use with Root-without root Mutant Kernel not work.
To use with Mutant Kernel --Root required
3.Before install make backup to externall sd card and then 5 wipes ,without SD card
Click to expand...
Click to collapse
No you didn't specify that you need to be already on ROM J330FXXU3ARC5 to flash this, it's not even stated on your install guide either. So i guess i'll have to downgrade my phone then see if this will work by then.
Thanks again
adipatihalim said:
I've tried to flash my j330G with this Rom, and for one hour my phone can't start normally and just stuck on code binaries with restart not only several time but also many times. Please help me to fix this
Click to expand...
Click to collapse
Same problem here "checking code binaries" tested on j330g ds
adipatihalim said:
Yeah ... i can, is there ane effect?
Click to expand...
Click to collapse
Flash the stock Rom and back it up then after reflashing this Rom restore just the boot partition with twrp as the op said
Cant encrypt device on stock rom without root the system ui crashes
I know with root it will 100% not work
When i choose laungage dutch the menu is still english
Who can help me?
Tnx in advance
Tried restore only boot partition still didnt work. Now the "Checking codefire binaries" is gone and its always reboot to twrp even i choose reboot system