Related
The keyboard doesn't work for enter sim pin after I get to CWM, even if I don't do anything in there.
For example, I get in CWM-do nothing there-reboot system and after that I can't enter sim pin.After 5-6 reboots with the power button pressed for 5sec it's ok
Here is my logcat:
Amathagma said:
The keyboard doesn't work for enter sim pin after I get to CWM, even if I don't do anything in there.
For example, I get in CWM-do nothing there-reboot system and after that I can't enter sim pin.After 5-6 reboots with the power button pressed for 5sec it's ok
Here is my logcat:
Click to expand...
Click to collapse
how you installed CWM and on what rom are you know?
Sabyn said:
how you installed CWM and on what rom are you know?
Click to expand...
Click to collapse
CWM was already in the ALL IN ONE guide i found here: http://forum.xda-developers.com/showthread.php?t=2405357
and the rom is CM 10.1
Amathagma said:
CWM was already in the ALL IN ONE guide i found here: http://forum.xda-developers.com/showthread.php?t=2405357
and the rom is CM 10.1
Click to expand...
Click to collapse
try to reflash the CM, maybe it is only a bug, i know some persons who had this problem, and with a re-flash the problem was solved
Sabyn said:
try to reflash the CM, maybe it is only a bug, i know some persons who had this problem, and with a re-flash the problem was solved
Click to expand...
Click to collapse
Clear data, cache and dalvik and flash again from CWM?Or i need something else?
(if i'm not mistake, i have done it) but ok, i can give a try.
Amathagma said:
Clear data, cache and dalvik and flash again from CWM?Or i need something else?
(if i'm not mistake, i have done it) but ok, i can give a try.
Click to expand...
Click to collapse
wipe data, cache and dalvik, after flash the cm10.1 or what you have
Sabyn said:
wipe data, cache and dalvik, after flash the cm10.1 or what you have
Click to expand...
Click to collapse
Ooh i forgot to mention that phone is e610v, not just e610.I don't know if that is problem...
Edit: no luck with re-flash CM.
Amathagma said:
Ooh i forgot to mention that phone is e610v, not just e610.I don't know if that is problem...
Edit: no luck with re-flash CM.
Click to expand...
Click to collapse
aaa, just a question, your phone is rooted right?
Sabyn said:
aaa, just a question, your phone is rooted right?
Click to expand...
Click to collapse
Yes, through the ALL IN ONE guide i posted before.
Amathagma said:
Yes, through the ALL IN ONE guide i posted before.
Click to expand...
Click to collapse
ok, because i know i had problems with E610V, i couldn`t root or flash on it, so i installed firmware for E610 , and after root, cwm and installed CM without any problems
Sabyn said:
ok, because i know i had problems with E610V, i couldn`t root or flash on it, so i installed firmware for E610 , and after root, cwm and installed CM without any problems
Click to expand...
Click to collapse
The guide that i used, had already 20d Baltic version.That means that the phone upgraded to e610, not e610v version.
I attached and a screenshot with the firmware version.It's in Greek but you can see which version is.
Can I reflash only CWM?And how?
Amathagma said:
Can I reflash only CWM?And how?
Click to expand...
Click to collapse
this is the software you have or the cm? i mean, how are you on settings if you couldn`t type the sim code
Sabyn said:
this is the software you have or the cm? i mean, how are you on settings if you couldn`t type the sim code
Click to expand...
Click to collapse
This screenshot is from my rom, CM 10.1 and I wrote in the beginning that I can enter pin after 5-6 reboots with the power key pressed for 5sec.
Edit:Updated to CM 10.2 with clean install and fixed.Thanks...
Been using rooted stock roms for forever, but found myself lacking the need for wifi calling as of late, so I've been open to flashing something with more pizaz. I tried flashing both Dark Unicorn and Blisspop today, but neither would allow me to enabled cellular networks (it would toggle on, then back off by itself a few seconds later). I'm on T-mobile, I tried all three APN's that were pre-loaded. The notification drop-down would show it was connected to T-mobile, but it wouldn't show a data signal, and had an exclamation point over the cell signal. Anyone have suggestions on how to rectify this, or is this expected?
eclipsed450 said:
Been using rooted stock roms for forever, but found myself lacking the need for wifi calling as of late, so I've been open to flashing something with more pizaz. I tried flashing both Dark Unicorn and Blisspop today, but neither would allow me to enabled cellular networks (it would toggle on, then back off by itself a few seconds later). I'm on T-mobile, I tried all three APN's that were pre-loaded. The notification drop-down would show it was connected to T-mobile, but it wouldn't show a data signal, and had an exclamation point over the cell signal. Anyone have suggestions on how to rectify this, or is this expected?
Click to expand...
Click to collapse
did you use hybrid bootstacks ? can you find baseband or modem for your variant .? flash it .
raptorddd said:
did you use hybrid bootstacks ? can you find baseband or modem for your variant .? flash it .
Click to expand...
Click to collapse
I didn't do anything different from using the bootstack I have for the D80130b rom I have loaded currently. Where might I find said bootstacks, basebands, and/or modem zips?
eclipsed450 said:
I didn't do anything different from using the bootstack I have for the D80130b rom I have loaded currently. Where might I find said bootstacks, basebands, and/or modem zips?
Click to expand...
Click to collapse
ok i reread your post, so it turns off by itself, only think i would do is to reflash rom. wiping all.
raptorddd said:
ok i reread your post, so it turns off by itself, only think i would do is to reflash rom. wiping all.
Click to expand...
Click to collapse
Tried each only once, will try again. When the first didn't work, I tried the other rom. WHen the second didn't work, I restored back to current. With each flash, I did advanced wipe, doing system, data, cache, and dalvik
Will try them again, wish me luck
eclipsed450 said:
Will try them again, wish me luck
Click to expand...
Click to collapse
5.1.1 roms all have the ! signal next to it. so you saying that you cant connect to internet using data.?
they to download hybrid bootstacks, you know the procedure,
wipe all, install hybrid bootstacks, then go into main menu then reboot into recovery from recovery then, copy rom into phone flash rom and gapps.
raptorddd said:
5.1.1 roms all have the ! signal next to it. so you saying that you cant connect to internet using data.?
they to download hybrid bootstacks, you know the procedure,
wipe all, install hybrid bootstacks, then go into main menu then reboot into recovery from recovery then, copy rom into phone flash rom and gapps.
Click to expand...
Click to collapse
When you say "copy rom into phone", it seems there's a chance I'd loose data on internal storage? :-/
And what about if I want to restore back my current rom - is there anything that needs to be undone? (thanks for the replies, btw)
I'm at twrp 2.8.6.1, fyi
eclipsed450 said:
When you say "copy rom into phone", it seems there's a chance I'd loose data on internal storage? :-/
Click to expand...
Click to collapse
i recommend balstagator twrp to prevent display damage cause of heat.http://forum.xda-developers.com/lg-g2/development/twrp-twrp-2-8-0-0-kernel-f2fs-tools-t2898705
when in recovery yes delete all if you have stuff in your phone if they are pics just move them to pc, if those are apps use titanium paid app that will back up, app and data like whats app all conversations. if its only like pics videos moved them to pc, if apps using the free version of titanium back up ypu cant restore batches, musst must do one installation at a time..
its always better to install a fresh installation that means wipe all.
to be honest i dont do nandroid that is what is called in twrp back up,i think i did once and it didnt worked, it does work if i want to mess with rom and if it fails or i get problem doinga restore brings back the way it was just like a restore point. but am not really sure if you wipe all and do a nandroid restore it would bring back the rom, as am typing i did one am trying a ifferent rom.. ill see if it works..
ok i tried 2 roms 1 stock custom, and cm13 so i just restore my nandroid and it worked. ive selected all in back up. wipe all then copy back the twrp back up and restore it. it works ...
ok i got some folders missing like dcim.well most just copy important folders like music videos and pics to pc then once you restore it copy them back.
Had the same no data issue on blisspop I changed the apn setting to IPv6 and data came back on.
Shamec said:
Had the same no data issue on blisspop I changed the apn setting to IPv6 and data came back on.
Click to expand...
Click to collapse
I just reflashed blisspop and changed to ipv6,and it worked. I did ipv6 on DU rom, but didn't try it on blisspop. I also upgraded to twrp 2.8.7.3. Thanks for the help everyone, loving blisspop so far
eclipsed450 said:
I just reflashed blisspop and changed to ipv6,and it worked. I did ipv6 on DU rom, but didn't try it on blisspop. I also upgraded to twrp 2.8.7.3. Thanks for the help everyone, loving blisspop so far
Click to expand...
Click to collapse
good, i have used blisspop i like it very much, i also had use in the past tipsy and tesla, but i havent had the chance to try them on g2.
I used TWRP Backup, to get a backup of my phone. I was on B574 official build. After that, I installed B574 Deodex (a custom rom slightly changed from the official). One big extra that the Deodex gave me, is that with the xposed installed, I could have my call app, operational. This Rom, has some drawbacks, so I decided to return to the official one, using my backup through TWRP. The problem is, that although I had everything wiped (including system and internal storage), my restored rom, has issues similar to the deodex one (including the issues I had originally with the official build). Am I doomed to go for a new fresh install and without the Xposed? Does anyone know why I get a hybrid of both Roms?
Thanks in advance!
spirto82 said:
I used TWRP Backup, to get a backup of my phone. I was on B574 official build. After that, I installed B574 Deodex (a custom rom slightly changed from the official). One big extra that the Deodex gave me, is that with the xposed installed, I could have my call app, operational. This Rom, has some drawbacks, so I decided to return to the official one, using my backup through TWRP. The problem is, that although I had everything wiped (including system and internal storage), my restored rom, has issues similar to the deodex one (including the issues I had originally with the official build). Am I doomed to go for a new fresh install and without the Xposed? Does anyone know why I get a hybrid of both Roms?
Thanks in advance!
Click to expand...
Click to collapse
What issues? I have this rom.
Harassment filter does not work (whether you try through phone manager or call app) and since I install it, my external storage is not recognized by my pc. I can only see the picture folder.
Sent from my Huawei P8 Lite Ale - L21C432B574 using Tapatalk.
spirto82 said:
Harassment filter does not work (whether you try through phone manager or call app) and since I install it, my external storage is not recognized by my pc. I can only see the picture folder.
Click to expand...
Click to collapse
Hmmm.... I don't have this problem. My harassment filter is working also the pc detects external and internal storage (using MTP).
Unfortunately for me the harassment auto closes and I cannot detect my SD.
Sent from my Huawei P8 Lite Ale - L21C432B574 using Tapatalk.
spirto82 said:
Unfortunately for me the harassment auto closes and I cannot detect my SD.
Click to expand...
Click to collapse
If you are talking about online number identification then that feature doesn't work (you need to manually add number either via dialer or in text messages). Can you detect sdcard using hi suite?
Suleiman01 said:
If you are talking about online number identification then that feature doesn't work (you need to manually add number either via dialer or in text messages). Can you detect sdcard using hi suite?
Click to expand...
Click to collapse
No. To give you a hint , I had 2 calls and 2 messages in the harassment and I couldn't see who was it. It doesn't open at all. Can you give me instructions on what did you do, in order to install the rom? Although I am pretty sure, I followed every single instruction .....
spirto82 said:
No. To give you a hint , I had 2 calls and 2 messages in the harassment and I couldn't see who was it. It doesn't open at all. Can you give me instructions on what did you do, in order to install the rom? Although I am pretty sure, I followed every single instruction .....
Click to expand...
Click to collapse
Did you flash this file too?
Suleiman01 said:
Did you flash this file too?
Click to expand...
Click to collapse
I did it, but not at the first installation, cause I didn't have any problem.
spirto82 said:
I did it, but not at the first installation, cause I didn't have any problem.
Click to expand...
Click to collapse
Type this in dialer *#*#2846579#*#*
Now go in Network information query and then vendor country info
My vendor is hw and country is eu.
Suleiman01 said:
Type this in dialer *#*#2846579#*#*
Now go in Network information query and then vendor country info
My vendor is hw and country is eu.
Click to expand...
Click to collapse
both of them are missing, It says that "it does not exist". What exactly is this?
spirto82 said:
both of them are missing, It says that "it does not exist". What exactly is this?
Click to expand...
Click to collapse
Your location is lost. You need to flash that file to fix that problem.
Suleiman01 said:
Your location is lost. You need to flash that file to fix that problem.
Click to expand...
Click to collapse
ok.fixed that. now what?
spirto82 said:
ok.fixed that. now what?
Click to expand...
Click to collapse
Try clearing cache and dalvik cache(via TWRP) and check if it is working or not.
althought, I had tried cleaning them, somehow I got factory reset. At this moment i am getting the backup through huawei backup. We'll see. Thanks in advance! From the moment I got factory reset, the harassment filter works. Let's see after the backup is restored ......
Suleiman01 said:
Try clearing cache and dalvik cache(via TWRP) and check if it is working or not.
Click to expand...
Click to collapse
Ok, done it. The problem remains. After having factory reset, it seemed to work (didn't have any problem), but after a while, I got the same issue. The harassment filter gets a forced close. Also while attempting to enter something like "management rights", I have the same response from the system, having a forced close.
spirto82 said:
Ok, done it. The problem remains. After having factory reset, it seemed to work (didn't have any problem), but after a while, I got the same issue. The harassment filter gets a forced close. Also while attempting to enter something like "management rights", I have the same response from the system, having a forced close.
Click to expand...
Click to collapse
Can you flash official firmware again(use different version now).
Suleiman01 said:
Can you flash official firmware again(use different version now).
Click to expand...
Click to collapse
I think I'll get to the official 574 .... thanks!
Hi folks, first off English is not my main modus operandi so bear with me thx.
I tried out every room there is for the VNS-L31, CM13 from here, Revolution RC3 from a Spanish forum, Beanstalk and a few others what where more glorified reskins ... anyway before installing CM13 I made a full dump on TWRP but wile forgetting I wasn't on stock but on Revolution RC3, so I ended up with the wrong encryption key for the DATA folder, pardon me internal memory SD ... RRC3 is based on the European Stock B150 with a lot of tweaks, also a not perfect encryption of the internal SD similarly to CM13 problem with the SD.
Here is the main beef I am having, after getting of CM I tried to restore my dump and ended up ****ing up the encryption of the internal memory card. Now I can't got back to say the 161 internalional version and I am kinda bound to the European L31900B versions of the stock rom if I install anything else the accounts like Google or Facebook are not working and anything not installed already on the phone is FC.
I can't format data because of the encryption. Not under fastboot or any of the trwps, tried 3 different ones, I checkted the phone is not frp. I did lock frp and bootloader again and unlocked them so to double make sure I was right on that one. I tried going back to stock with the dload method but no dice data still locked. Delete accounts with root explorer and went back to vnsl31900b130 what seams to be the firmware that I am stuck on now with the ****ed up encryption ....
I am used to flashing stuff left and right but this is new land for me any help would be greatly appreciate ... And my warning DONT SCREW WITH TGE ENCRYPTION ON YOUR PHONE ... ITS A *****!!!!
Cant you just delete the system in TWRP?
Thijs van Hal said:
Cant you just delete the system in TWRP?
Click to expand...
Click to collapse
Nope I deleted everything in TWRP, System, Cust, that is not a problem, the data partition on the other hand I can't format not I twrp, or by fastboot erase/format/-w commands ... Really annoying, never had an issue like this ... Funny that I can delete things with an root explorer under Android and that saving data works fine but the moment I leave the os it just closes up. Even the dump I made can't replace the data partition outside of the os
markus2811 said:
Nope I deleted everything in TWRP, System, Cust, that is not a problem, the data partition on the other hand I can't format not I twrp, or by fastboot erase/format/-w commands ... Really annoying, never had an issue like this ... Funny that I can delete things with an root explorer under Android and that saving data works fine but the moment I leave the os it just closes up. Even the dump I made can't replace the data partition outside of the os
Click to expand...
Click to collapse
Ive never seen that before to, weird man...
I have the same issue. Any fix?
Nemeroz said:
I have the same issue. Any fix?
Click to expand...
Click to collapse
No, but I am starting from scratch, also I am trying to manually corrupt the data partition so to be able to format it ... Just a pain, at the moment I am stuck, maybe if I can get someone else's firmware dump for my phone might do the trick its big so I am not sure anyone would upload something that big ... We see
markus2811 said:
No, but I am starting from scratch, also I am trying to manually corrupt the data partition so to be able to format it ... Just a pain, at the moment I am stuck, maybe if I can get someone else's firmware dump for my phone might do the trick its big so I am not sure anyone would upload something that big ... We see
Click to expand...
Click to collapse
Did you try to Flash stock recovery and do a factory reset?
Or via fastboot do this command :
fastboot format userdata
Sent from my HUAWEI VNS-L31 using XDA Labs
simo255 said:
Did you try to Flash stock recovery and do a factory reset?
Or via fastboot do this command :
fastboot format userdata
Sent from my HUAWEI VNS-L31 using XDA Labs
Click to expand...
Click to collapse
I tried all of them. Nothing worked :crying:
Nemeroz said:
I tried all of them. Nothing worked :crying:
Click to expand...
Click to collapse
So I fixed my problems with BadWolfs help he got me back to stock by flashing a special zip that allowed me to install the firmware from dload on the external sdcard
Thx again for your help
markus2811 said:
So I fixed my problems with BadWolfs help he got me back to stock by flashing a special zip that allowed me to install the firmware from dload on the external sdcard
Thx again for your help
Click to expand...
Click to collapse
Forgot here us the link http://www.htcmania.com/showthread.php?t=1261335
Everything you need to go back to stock from cm13 (if you screw up like me) or nougat beta is in here. Is in spanish but google translate is doing a pretty good job all bloody credit is going to badwolf and his friends
Thx and good night
markus2811 said:
Forgot here us the link http://www.htcmania.com/showthread.php?t=1261335
Everything you need to go back to stock from cm13 (if you screw up like me) or nougat beta is in here. Is in spanish but google translate is doing a pretty good job all bloody credit is going to badwolf and his friends
Thx and good night
Click to expand...
Click to collapse
when you flash the oem info didnt it say unable to mount data? like before?
Hi all,
Fairly new to this phone (9t) and am currently on Titanium is. Was wondering if there's a way to disable encryption as I tend to find if things go wrong you potentially lose all data and I tend to mess about with mods etc so don't want to run that risk!
Cheers!
Anyone?
twist3d0n3 said:
Anyone?
Click to expand...
Click to collapse
Idk if its the right answer but u need to backup ur files on ur pc first (i suggest u mixplorer to copy them by wifi, usb is kinda slow for me) than u need to format data and flash DFE everytime when u flash a rom to boot
twist3d0n3 said:
Hi all,
Fairly new to this phone (9t) and am currently on Titanium is. Was wondering if there's a way to disable encryption as I tend to find if things go wrong you potentially lose all data and I tend to mess about with mods etc so don't want to run that risk!
Cheers!
Click to expand...
Click to collapse
You need to format Data to remove encryption ONlLY if you want to install custom ROMs
For Magisk and any modding you plan to do with Magisk/root, you don't need.
Also, for the official TWRP or OrangeFox you don't need to decrypt (unless you go for custom ROMs)
I'm currently on a custom ROM but when I first went through the setup process everything was decrypted, then when I booted up and went in settings, it said encrypted and going by to twrp asked for my pattern to decrypt. I'm not sure what I've missed through doing all that but as a consequence, whenever I flash an update to the ROM, I have to reflash vendor + fw just to be able to boot again... I'm worried that at some point this will **** up and screw my data up.
So say for example if I set everything up from scratch again, what process should I follow? I'm using the Italian guys' twrp atm (sorry forget his username!) So is there a different twrp I should use instead or is there anything else I need to flash/do to avoid encryption happening on first boot?
Badis st said:
Idk if its the right answer but u need to backup ur files on ur pc first (i suggest u mixplorer to copy them by wifi, usb is kinda slow for me) than u need to format data and flash DFE everytime when u flash a rom to boot
Click to expand...
Click to collapse
Sorry what's dfe?
twist3d0n3 said:
Sorry what's dfe?
Click to expand...
Click to collapse
DFE = Disable Forced Encryption
So it will remove ROM encryption...
Micdu70 said:
DFE = Disable Forced Encryption
So it will remove ROM encryption...
Click to expand...
Click to collapse
Is there a zip to flash to do this? If so have you got a link?
twist3d0n3 said:
Is there a zip to flash to do this? If so have you got a link?
Click to expand...
Click to collapse
Yes it's a zip to flash but I don't know where to get it... (if not already in TWRP options/advanced maybe?... I never flashed this).
Micdu70 said:
Yes it's a zip to flash but I don't know where to get it... (if not already in TWRP options/advanced maybe?... I never flashed this).
Click to expand...
Click to collapse
Nah I've looked in twrp as I've seen an option mentioned previously. Thanks for the help tho man