I rebooted my phone recently and my gyro sensor has stopped working. I'm currently running the official lineage 14.1 nightly and was running the same rom when this problem occurred. Ive tried doing a clean flash of lineage bt the gyro is still not working. Do i need to take it to the service centre or can it be fixed. Please help.
Apparently its a hardware issue...get it checked in service center
Related
Hi I am using Lineage os 7.1.2 in my zuk z1 but in that auto rotate screen is not working
Accelerometer sensor
Orientation sensor
These sensors are not working when I keep for Airtel 4g in my network settings options as LTE calls doesn't come
Jaganzukz1 said:
Hi I am using Lineage os 7.1.2 in my zuk z1 but in that auto rotate screen is not working
Accelerometer sensor
Orientation sensor
These sensors are not working when I keep for Airtel 4g in my network settings options as LTE calls doesn't come
Click to expand...
Click to collapse
clean flash stock zui 2.5 rom till complete start up, then clean flash lineage again. i don't knowthe reason but this happened to me before and zui 2.5 fixed it.
hello friends,
I am using custom rom in which my fingerprint working fine for some days but suddenly some day it disappeared .Unable to found fingerprint option anywhere in my zuk z1 device.I tried clearing credentials and unmarking android device manager etc and tried flashing with another customer roms still no solution at all. I am using lineage os 7.1.2 custom rom currently .if anyone have solution please help me in this.
thank you .
srk2521 said:
hello friends,
I am using custom rom in which my fingerprint working fine for some days but suddenly some day it disappeared .Unable to found fingerprint option anywhere in my zuk z1 device.I tried clearing credentials and unmarking android device manager etc and tried flashing with another customer roms still no solution at all. I am using lineage os 7.1.2 custom rom currently .if anyone have solution please help me in this.
thank you .
Click to expand...
Click to collapse
One possible solution is to flash zui 2.5. If that won't work a hardware fault can be the nearest problem as your problem is known and leads to that.
thanks strongst sir,I tried flashing zui and i am getting add fingerprint option but while doing fingerprint clicks for setting fingerprint lock my sensor not detecting my finger clicks.So i think it might be hardware problem .
srk2521 said:
thanks strongst sir,I tried flashing zui and i am getting add fingerprint option but while doing fingerprint clicks for setting fingerprint lock my sensor not detecting my finger clicks.So i think it might be hardware problem .
Click to expand...
Click to collapse
As I mentioned, the faulty fp hardware a widely known problem of the zuk z1
Hi all!
I have a bit problem with my x720. I just realised some of sensors don't work.
I don't know that it has worked well before or not, but I had to unbrick it from the dead by the qfil ROM.
So after that I realised they are not working.
I have tried lots of ROM and Fw, but the proximity & light sensor don't work and neither the HAL sensor!
I don't know how could I fix it, but please someone help me! Every idea will be fine for me!
They are working well in your phone??
Thanks!
Same here. My x720 hanged and shut down suddenly. I was using stock 028S.
It was bricked and I had to resurrect it with Qfil. After that neither the proximity sensor, nor the compass, nor the fingerprint, nor the accelerometer work. I think that it's a hardware issue and I'm going to contact the seller, because it still has warranty.
Do you have any further information? What ROM were you using?
Thanks and good luck
I finally managed to solve my problem with the sensors flashing another Qfil image. I think the first one had some problem.
Which qfil you used, because all my sensors proximity, rotation, fingerprint etc dont work.
They are working on original EUI 1D and 20s as long as one PixelExperience but not for the rest, has anyone any idea?
Ohh thats in a X722
Hello, excuse me for bad English. My problem is that after installing "Ressurection Remix 5.8.3.zip" and "open_gapps-arm-7.1-mini-20180827.zip" the magnetic sensor stopped working. If possible, help me. Thanks.
Flash Los 14.1 or DotOS v1.2 and all sensors should be working
Mugi
Hello everyone!
So I'm having this weird issue where the camera/flashlight all of a sudden stopped working one day (didn't make any device changes) but it had happened occasionally and all I needed to do was clear dalvik/cache and it would be fine regardless of Lineage version. Now that solution no longer works. I just flashed both stock Nougat and Oreo firmwares to see if it was a hardware issue and the camera works perfectly fine. It's just on Lineage that it all of a sudden won't work (tried clean installs of 14, 15.1, 16 and now 17) and none of them have a working camera so I wanted to get you guys' input on what it could be.
Basically tl;dr
Lineage = camera/flashlight not working
Stock nougat/oreo = camera works perfectly
iTzFeRReTTi said:
Hello everyone!
So I'm having this weird issue where the camera/flashlight all of a sudden stopped working one day (didn't make any device changes) but it had happened occasionally and all I needed to do was clear dalvik/cache and it would be fine regardless of Lineage version. Now that solution no longer works. I just flashed both stock Nougat and Oreo firmwares to see if it was a hardware issue and the camera works perfectly fine. It's just on Lineage that it all of a sudden won't work (tried clean installs of 14, 15.1, 16 and now 17) and none of them have a working camera so I wanted to get you guys' input on what it could be.
Basically tl;dr
Lineage = camera/flashlight not working
Stock nougat/oreo = camera works perfectly
Click to expand...
Click to collapse
Ask in the specific Los thread, theirs numerous camera issue discussions
Sent from my LG-H910 using XDA Labs