Hi guys
I bought axon 7 a2017 from aliexpress China.
And I installed the nougat for a2017g by mistake and I couldn't find the original system. The problem in the new system that the phone can't recognize my SIM "I'm living in Saudi Arabia". It actually recognize the SIM but with 0 signals and when I tried to make a phone call it says turn off aeroplane mode. I talked to someone here in Saudi Arabia and he has the same version but we don't know how to extract it out of his device.
And also Issued to install twrp and I've had black screen when I tried to start the recovery
And I tried bunch of updates with no use
I was on ZTE_2017V2.1.1B07 (based on 6.0.1)
And now I'm running ZTE_2017GV1.1.0B01 (based on 7.0)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is an example of what I have tried along with fota update
Also I can downgrade the phone to a2017g b10 based on 6.0.1
.......
If you are still on Nougat, flash this modem for china unit.
https://www.androidfilehost.com/?fid=457095661767137840
otaconremo said:
If you are still on Nougat, flash this modem for china unit.
https://www.androidfilehost.com/?fid=457095661767137840
Click to expand...
Click to collapse
What to do :crying:
I'm still on nougat, btw
Unlock and flash whatever you want.
lafester said:
Unlock and flash whatever you want.
Click to expand...
Click to collapse
how ?
Fs_z_m said:
What to do :crying:
Click to expand...
Click to collapse
You must install the modem zip in twrp.. if you haven't unlocked your bootloader, unlock it first.. EDL method is the easiest. Miflash b15 twrp, reboot to bootloader, fastboot oem unlock then reboot to recovery and install the modem in twrp.
otaconremo said:
You must install the modem zip in twrp.. if you haven't unlocked your bootloader, unlock it first.. EDL method is the easiest. Miflash b15 twrp, reboot to bootloader, fastboot oem unlock then reboot to recovery and install the modem in twrp.
Click to expand...
Click to collapse
Can you give me the details I'm a beginner
Details are in the edl thread. Pinned in dev section.
Did you fixed it?
Hello, I bought an axon 7 a2017 and did the same mistakes as you did. Will you please tell me if you fixed the issue, and how exactly? Thank you very much.
Domynicus said:
Hello, I bought an axon 7 a2017 and did the same mistakes as you did. Will you please tell me if you fixed the issue, and how exactly? Thank you very much.
Click to expand...
Click to collapse
https://forum.xda-developers.com/showthread.php?t=3553514
Enviado desde mi ZTE A2017U mediante Tapatalk
Altomugriento said:
https://forum.xda-developers.com/showthread.php?t=3553514
Enviado desde mi ZTE A2017U mediante Tapatalk
Click to expand...
Click to collapse
Thank you very much for the answer. I will look into it.
Related
Leaked Meizu MX6 ROM
coming with Helio X20 and MM
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
:angel:
Nah I've had enough of Meizu's arseholery. Unless it can be fully unlocked and gets enough custom dev support I ain't falling for their crap again. My PRO 5 could be such an amazing phone in the custom scene but we're only just now getting TWRP and there is still a long way to go.
The PRO 5 will be my 1st and probably last Meizu phone.
showofdeth said:
Nah I've had enough of Meizu's arseholery. Unless it can be fully unlocked and gets enough custom dev support I ain't falling for their crap again. My PRO 5 could be such an amazing phone in the custom scene but we're only just now getting TWRP and there is still a long way to go.
The PRO 5 will be my 1st and probably last Meizu phone.
Click to expand...
Click to collapse
Meizu need to chage the strategy
MX6 3D Press and NFC have it?
Sent from my Meizu MX5 using XDA Labs
Answer please, you have this firmware? And what tools to be used for you got it?
I interested in it because I'm tryed to find any way to change ID of device to global, but SP Flash Tool don't allow to flashing without .auth file.
Would you have it? Please, help.
crosstech said:
Answer please, you have this firmware? And what tools to be used for you got it?
I interested in it because I'm tryed to find any way to change ID of device to global, but SP Flash Tool don't allow to flashing without .auth file.
Would you have it? Please, help.
Click to expand...
Click to collapse
+1
Sorry but is useless, if you brick an Meizu device only customer service can reflash it and repair it.
Inviato dal mio Z2plus utilizzando Tapatalk
crosstech said:
Answer please, you have this firmware? And what tools to be used for you got it?
I interested in it because I'm tryed to find any way to change ID of device to global, but SP Flash Tool don't allow to flashing without .auth file.
Would you have it? Please, help.
Click to expand...
Click to collapse
you can flash with flash firen not matter it*s Chinese or global rom
I want to get a custom rom but im pretty new to bootloader unlocking....i know my phone has it locked because Kingo root was removed on reboot BTW my phone is a note 3 from canada AKA sm-w900w8 (sorry if i posted in the wrong place this is my first time here at XDA)
w900w8 ? n900w8 ?
If it's really locked, don't you think that by now there is tons of info on the web ? The phone is not from yesterday.
Why don't you Read the N900w8 ??? Thread in general section or search XDA .
Bootloader locked sorry I know nothing about that on your model are you sure you have the right model .Boot to download mode to check model .
Sent from my SM-N930F using XDA-Developers Legacy app
Dejan Sathanas said:
w900w8 ? n900w8 ?
If it's really locked, don't you think that by now there is tons of info on the web ? The phone is not from yesterday.
Click to expand...
Click to collapse
well regarding that...i found a way but every time i try use this command (fastboot oem unlock) it gives me this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Question one.
Is your phone a model with a locked bootloader.
Sent from my SM-N930F using XDA-Developers Legacy app
Yes
Boot to download mode it will show the actual model of your phone .
Sent from my SM-N930F using XDA-Developers Legacy app
The Canadian Note 3 sm-n900w8 does not have a locked bootloader. For a custom ROM, flash TWRP and flash the ROM from TWRP.
The phone doesn't support fastboot commands.
Thanks! once you told me that it really helped thanks audit13!
Canadian Note 3 SM-N900W8 - Unlocked Bootloader
audit13 said:
The Canadian Note 3 sm-n900w8 does not have a locked bootloader. For a custom ROM, flash TWRP and flash the ROM from TWRP.
The phone doesn't support fastboot commands.
Click to expand...
Click to collapse
Thanks for the heads-up. No wonder when I tried to install ADB & Fastboot, the installation couldn't be completed. Now I can root with CFAR and install TWRP on my Canadian Note 3 SM-N900W8 with confidence. :good:
My Yu Yureka Plus came with AOSP android instead of Caynogen lollipop. It has a AOSP recovery and a different fastboot. Images below. The fastboot does not accept any existing Yu commands like bootloader(results in failure) Can anybody please help?
The recovery states
Information
Do not disconnect the data cable.
And the bottom right states Non-secure phone. Help
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
bump
ishreyasi said:
My Yu Yureka Plus came with AOSP android instead of Caynogen lollipop. It has a AOSP recovery and a different fastboot. Images below. The fastboot does not accept any existing Yu commands like bootloader(results in failure) Can anybody please help?
The recovery states
Information
Do not disconnect the data cable.
And the bottom right states Non-secure phone. Help
Click to expand...
Click to collapse
Flash firmware using ygdp tool. Stock KitKat first version
www.firmwarefile.com
The Flash Fails
nischait said:
Flash firmware using ygdp tool. Stock KitKat first version
www.firmwarefile.com
Click to expand...
Click to collapse
Can you please point me to the flash file I have to to flash? There are so many versions with different names I get confused. My model is YU5510A. Any help would be much appreciated.
Should I flash the YU5510A's first version or YU5510's first version? A direct link would be much better.
ishreyasi said:
Can you please point me to the flash file I have to to flash? There are so many versions with different names I get confused. My model is YU5510A. Any help would be much appreciated.
Should I flash the YU5510A's first version or YU5510's first version? A direct link would be much better.
Click to expand...
Click to collapse
Anyone version (https://docs.google.com/uc?id=0B83HmT8ytmvnb0dpMW9YRkJkWms)
Its 2nd version I have not checked ,check it and update
Then unlock bootloader
Install twrp
Then flash any custom ROM
nischait said:
Anyone version (https://docs.google.com/uc?id=0B83HmT8ytmvnb0dpMW9YRkJkWms)
Its 2nd version I have not checked ,check it and update
Click to expand...
Click to collapse
What do you mean by 2nd version? There is only one file in the drive link. What should i check?
ishreyasi said:
What do you mean by 2nd version? There is only one file in the drive link. What should i check?
Click to expand...
Click to collapse
Download it
Extract folder
Install ygdp tool
Flash CBP file
Done
Hello i have same problem and my phone is not detected in pc
Hello
My model phone was ale-l02
After some update i did
its now hi6210sft - BalongC52B311!!
I have download many ale-l02 rom and every time i use
fastboot flash boot boot.img
I get remote:command not allowed
Anyway to fix that !??
waxxx said:
Hello
My model phone was ale-l02
After some update i did
its now hi6210sft - BalongC52B311!!
I have download many ale-l02 rom and every time i use
fastboot flash boot boot.img
I get remote:command not allowed
Anyway to fix that !??
Click to expand...
Click to collapse
Have you got unlock bootloader?
Adi5 said:
Have you got unlock bootloader?
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Its unlocked
waxxx said:
Hello
My model phone was ale-l02
After some update i did
its now hi6210sft - BalongC52B311!!
I have download many ale-l02 rom and every time i use
fastboot flash boot boot.img
I get remote:command not allowed
Anyway to fix that !??
Click to expand...
Click to collapse
Flash full official ROM of ALE-L02 and it will fix it
RootingPro-18 said:
Flash full official ROM of ALE-L02 and it will fix it
Click to expand...
Click to collapse
I have tested these ROMS
http://download-c1.huawei.com/download/downloadCenter?downloadId=64565&siteCode=ph
http://consumer.huawei.com/tw/support/downloads/detail/index.htm?id=80850
http://download-c1.huawei.com/download/downloadCenter?downloadId=91143&version=355462&siteCode=eten
http://download-c.huawei.com/download/downloadCenter?downloadId=80851&version=321576&siteCode=th
Error i get
remote:command not allowed
+
Install failed with SM CARD
waxxx said:
I have tested these ROMS
http://download-c1.huawei.com/download/downloadCenter?downloadId=64565&siteCode=ph
http://consumer.huawei.com/tw/support/downloads/detail/index.htm?id=80850
http://download-c1.huawei.com/download/downloadCenter?downloadId=91143&version=355462&siteCode=eten
http://download-c.huawei.com/download/downloadCenter?downloadId=80851&version=321576&siteCode=th
Error i get
remote:command not allowed
+
Install failed with SM CARD
Click to expand...
Click to collapse
you use firmawe extractor and fastboot flash system system.img etc. commands?
Adi5 said:
you use firmawe extractor and fastboot flash system system.img etc. commands?
Click to expand...
Click to collapse
Yes, i fixed it
But still hi6210sft BalongC52B311
How i can update it back to ale-l02 ?
Hi
To fix balong On TWRP go to cust/hw and if you see eu, change to eusingle and vice versa, than do a factory reset
Unlock your bootloader again
need help
waxxx said:
Yes, i fixed it
But still hi6210sft BalongC52B311
How i can update it back to ale-l02 ?
Click to expand...
Click to collapse
tell me anyone help please error remote command not allowed when trying to flash recovery etc system img file how to fix it???
My smartphone Oneplus8pro model IN2020 Brick how to unbrick, I want to help me
I MsmDownloadtool flash 7 time india,global,eu but not working and My Smartphone Oneplus8pro Dead
This is My Oneplus8pro model IN2020
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
IN2020 is the Chinese version. Did you originally flash it on Global?
snoop69 said:
IN2020 is the Chinese version. Did you originally flash it on Global?
Click to expand...
Click to collapse
I tried flash MsmDownloadtool Global and eu and india and hydrogen but it successful also bootloop logo oneplus . I tried flash 9 time How to Fix problem and thank you so much
Not sure if MSM works like that. It will relock your bootloader so make sure you choose the right firmware.
Debranding afaik is possible but not sure what the method is for the Chinese device.
Recover your phone to stock then start a thread or search for how to change region
dladz said:
Not sure if MSM works like that. It will relock your bootloader so make sure you choose the right firmware.
Debranding afaik is possible but not sure what the method is for the Chinese device.
Recover your phone to stock then start a thread or search for how to change region
Click to expand...
Click to collapse
It not working but i flash msmGlobal for Oneplus8pro (IN2020) and i flash MSMColourOs11
Saruchher said:
It not working but i flash msmGlobal for Oneplus8pro (IN2020) and i flash MSMColourOs11 agian it's successful but bootloop logo oneplus
Click to expand...
Click to collapse
Have you followed all steps from https://forum.xda-developers.com/t/...l-to-restore-your-device-to-oxygenos.4084953/
According to your topic name it's a chinese variant, i haven't seen oneplus make a specific chinese model for any of their phones so it must be either a indian, EU or global variant