Related
I've been reading something that interested me.
https://www.reddit.com/r/MotoX/comments/2kx2lv/how_do_you_encrypt_a_rooted_moto_x/
Specifically.
I had the same issue today. Booted into safe mode, then I was able to encrypt.
Press power button to get power off popup menu. Press and hold power off. You will get another popup offering to reboot in safe mode.
Safe mode worked. This uncomplicates my process of rooting, unrooting, encrypting, and having issues rerooting after encryption. This is also a crazy easy single step process for an issue that has given me months of headaches.
You shall be the first person ever that I have given gold to.
Thank you so much!
Click to expand...
Click to collapse
I enter my password in the encryption settings menu and hit the Encrypt button
Click to expand...
Click to collapse
How would encryption effect flashing a new rom?
What are your guys thoughts on encryptimg a unlocked and rooted phone?
I do not want to enable it yet till it is comfirmed its ok.
Thanks.
Um I haven't had a problem and I've encrypted the software many times as I have installed many rooms and I always encrypt after setting everything up post root so it should just work without issue. Maybe they just weren't being patient and it can take a bit of time
timde9 said:
Um I haven't had a problem and I've encrypted the software many times as I have installed many rooms and I always encrypt after setting everything up post root so it should just work without issue. Maybe they just weren't being patient and it can take a bit of time
Click to expand...
Click to collapse
What about unencrypting? To say to flash a new kernel or rom?
Well that's an interesting question. I am testing twrp builds from hashbang to try and get encryption fully supported for this device in twrp. Until that time you can actually still flash zips via adb sideload no problem
timde9 said:
Well that's an interesting question. I am testing twrp builds from hashbang to try and get encryption fully supported for this device in twrp. Until that time you can actually still flash zips via adb sideload no problem
Click to expand...
Click to collapse
Ohh. Cool. I'll have to learn adb.
@timde9
I've got twrp installed.
To get to recovrry mode, do I go into recovery mode in twrp and then the recovery button in twrp to install packages m zips from adb?
to install packages via adb is pretty simple really you just open twrp go to advanced menu and open "adb sideload" from there. Then connect your device to your computer install adb and sideload an app with this syntax
"adb sideload ***.zip"
That is radical. Ty for this.
Encryption went like a breeze.
took no more than 20 min. I feel safe now.
timde9 said:
Well that's an interesting question. I am testing twrp builds from hashbang to try and get encryption fully supported for this device in twrp. Until that time you can actually still flash zips via adb sideload no problem
Click to expand...
Click to collapse
Just found out after encrypting twrp fails to mount data to backup. I might restore without encryption. That way I have access to backups on my phone too.
So I am having a problem restoring a backup. Since I cannot decrypt, to get rid of data from being locked down, do I flash with a rom? I am stuck.
Ok I have to do a factory reset. But not sure if this exists and works through twrp. Or if I have to do a factory reset some otherway.
Ok I skipped trying to reinstall rom and did a little searching.
This guy but with a 6P had exact issue.
For me to wipe data I need to
Code:
fastboot format userdata
https://www.reddit.com/r/Nexus6P/comments/3qnzz0/twrp_unable_to_mount_data/
Hitti2 said:
Ok I skipped trying to reinstall rom and did a little searching.
This guy but with a 6P had exact issue.
For me to wipe data I need to
Code:
fastboot format userdata
https://www.reddit.com/r/Nexus6P/comments/3qnzz0/twrp_unable_to_mount_data/
Click to expand...
Click to collapse
Is this ok to do? I don't want mess anything up.
Hitti2 said:
Is this ok to do? I don't want mess anything up.
Click to expand...
Click to collapse
That will erase all your data including files, apps, etc. Anything installed to /system should be untouched.
asuhoops8628 said:
That will erase all your data including files, apps, etc. Anything installed to /system should be untouched.
Click to expand...
Click to collapse
Thanks for confirming this. Exactly what I need when time comes to decrypt "wipe" I will use this.
I wasn't sure if it would delete the partition or wipe, this is why I asked.
Ty.
Hitti2 said:
Thanks for confirming this. Exactly what I need when time comes to decrypt "wipe" I will use this.
I wasn't sure if it would delete the partition or wipe, this is why I asked.
Ty.
Click to expand...
Click to collapse
Upon reading this again, just to be safe, you might want to start with just a fastboot erase. I think format does the same thing, but I have never used it.
Since you would be specifying the partition with both commands, I do not think you are in risk of completely blowing up your user partition if you choose to use fastboot format, but once again, I have always just used fastboot erase.
Hitti2 said:
Ok I skipped trying to reinstall rom and did a little searching.
This guy but with a 6P had exact issue.
For me to wipe data I need to
Code:
fastboot format userdata
https://www.reddit.com/r/Nexus6P/comments/3qnzz0/twrp_unable_to_mount_data/
Click to expand...
Click to collapse
So I went to use this. I got an error.
Code:
Formatting is not supported for filesystem with type 'raw'
So now, that I am guessing, since twrp can now decrypt, I should just be able to go into twrp and do a full wipe and reinstall of the trupurexmm 2.5 And encryption should be gone?
Hitti2 said:
So I went to use this. I got an error.
Code:
Formatting is not supported for filesystem with type 'raw'
So now, that I am guessing, since twrp can now decrypt, I should just be able to go into twrp and do a full wipe and reinstall of the trupurexmm 2.5 And encryption should be gone?
Click to expand...
Click to collapse
Nope. Encryption is still enabled. I flashed trupurexmm 2.5 following
5. How To Install A ROM with TWRP Recovery
Prerequisites: unlocked bootloader, TWRP recovery.
Installing a ROM is a pretty straight forward and easy process. Before you install anything you should make a nandroid backup (instructions above).
Download a ROM and appropriate Gapps package and place on your device.
Boot into your custom recovery.
Perform a full wipe.
Select the wipe option from the TWRP home screen.
Select advanced wipe.
Check the system, data, cache, and dalvik cache options.
Swipe to wipe.
Install the ROM.
Select the install option from the TWRP home screen.
Navigate to where you have the ROM zip stored on your sd card and select it.
Swipe to install.
Most ROMs will run an installer script at this point but some ROMs have what is called an Aroma Installer which allow you to choose some install options before the script runs.
You will also need to install the appropriate gapps package directly after installing the ROM.
Once you've installed all necessary zips you'll have an option to wipe cache/dalvik and an option to reboot system. Wipe the cache/dalvik, hit the back button, and hit the reboot system button.
Click to expand...
Click to collapse
I'm having an issue encrypting. Encryption will not start on my rooted moto x. I factory reset and encrypted, but could not get root working. Flashed everything via adb sideload in twrp but root refueses to work. Any ideas
Sent from my XT1575 using Tapatalk
Hey guys,
I unlocked my bootloader and flashed a recovery succesfully. When I entered into recovery mode, I enter into TWRP, get to install SuperSU, but when I reboot my device, it is stuck on "warning etc..."
What could I have done wrong? How can I fix this? Any help would be very much appreciated.
I have a MXP XT1563
I installed this TWRP http://forum.xda-developers.com/devdb/project/?id=11587#downloads
And this SuperSU https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip
I honestly can't remember what fastboot files I download, but I suppose it was ok since I got to enter my unlocking code and unlock it.
Thanks in advance.
Regards from Mexico
When I enter into TWRP and enter somewhere, for instance Install, I can see my folders: amazon, kindle, whatsapp, etc... I suppose that's good news.
I've tried doing a factory reset from Wipe, no sucess.
Please help! I will be uncommunicated until I solve this
you should have read the forums first. did you take a nandroid before flashing su? of yes then restore that,
you need su 2.62-3
download the su then flash it again. here is the su.forum.xda-developers.com/moto-x-play/general/root-how-to-root-6-0-easly-t3277202
bablu048 said:
you should have read the forums first. did you take a nandroid before flashing su? of yes then restore that,
you need su 2.62-3
download the su then flash it again. here is the su.forum.xda-developers.com/moto-x-play/general/root-how-to-root-6-0-easly-t3277202
Click to expand...
Click to collapse
hi bablu048, I did not "nandroid" before flashing su. I did it after I flashed it and when I try to restore it it says it's read only.
Do I download su 2.62-3, copy it into my storage and flash it again, no matter all I've done by now?
when it asks to keep read only refect it select allow modifications,
yes, download that su , copy it to storage and flash.
bablu048 said:
when it asks to keep read only refect it select allow modifications,
yes, download that su , copy it to storage and flash.
Click to expand...
Click to collapse
ok, this is what I did: I downloaded the su, put in internal storage, went into recovery mode, got into twrp, installed new su.
Now it gets past the warning, but gets stuck now in the water-ish motorola logo...
When I go into Restore, I can see two back ups, when I try to restore any of them, it says "cannot restore system - - mounted read only" and no option to modify it.
thanks a lot for your help! I'm trying to follow your every advice as best as I understand it
DO NOT restore the old backup it has the old su you will be back to where you started.
]boot into twrp clear cache/dalvic cache and leave the phone on the watery logo for a few minutes..it takes some time to boot
bablu048 said:
DO NOT restore the old backup it has the old su you will be back to where you started.
]boot into twrp clear cache/dalvic cache and leave the phone on the watery logo for a few minutes..it takes some time to boot
Click to expand...
Click to collapse
I see... actually I didnt get to restore any of them. I cleared both caches and now I'm waiting in the watery logo.
In case I don't make it, I'll have to let it for a while like this: on the watery logo, the MXP is quite hot now... no problem if I let it like that for half a day? I'm worried about that
In case it doesn't pass from there... is downloading twrp backups still an option? I just finished downloading RSD lite.
fsae3 said:
I see... actually I didnt get to restore any of them. I cleared both caches and now I'm waiting in the watery logo.
In case I don't make it, I'll have to let it for a while like this: on the watery logo, the MXP is quite hot now... no problem if I let it like that for half a day? I'm worried about that
In case it doesn't pass from there... is downloading twrp backups still an option? I just finished downloading RSD lite.
Click to expand...
Click to collapse
just let it on the watery logo for 15-20 minutes if it's still not going any further you can download the backups and wipe the system, cache, dalvic cache then restore the backup
RSD lite is used to flash the original factory firmware then you have to root again.
bablu048 said:
just let it on the watery logo for 15-20 minutes if it's still not going any further you can download the backups and wipe the system, cache, dalvic cache then restore the backup
RSD lite is used to flash the original factory firmware then you have to root again.
Click to expand...
Click to collapse
I went to sleep and it didn't pass from the watery logo.
I manually backed up my files, so I'm not worried about anything I might have on the phone; still, I think flashing a new firmware will factory reset my MXP correct?
Is the original factory firmware the same as a stock image? I found this list of resources: https://github.com/motoxplay/stock. Under XT1563 - México, I can see my carrier, Iusacell. Will this do it?
Please do let me know.
fsae3 said:
I went to sleep and it didn't pass from the watery logo.
I manually backed up my files, so I'm not worried about anything I might have on the phone; still, I think flashing a new firmware will factory reset my MXP correct?
Is the original factory firmware the same as a stock image? I found this list of resources: https://github.com/motoxplay/stock. Under XT1563 - México, I can see my carrier, Iusacell. Will this do it?
Please do let me know.
Click to expand...
Click to collapse
yes it will wipe,
that's the correct firmware. 6.0.1
always take a nandroid before flashing su 2.62-3
after flashing twrp again when you boot into twrp do "swipe to allow modifications to /system"..you didn't do this that's why you were not able to restore backups.
bablu048 said:
yes it will wipe,
that's the correct firmware. 6.0.1
Click to expand...
Click to collapse
hi bablu048,
I found in here a "unSu" guide. I ran it, it deleted Su, then ran Su you recommended and I still got suck in the watery logo.
Then I "unSu" it again, now didn't run any Su, reeboted device and it finally started.
I think su is the problem. Where can I check what su should I use?
great first take a nandroid.
finding the correct su is hit and trial method. generally su 2.62-3 worked. try other su's 2.65,2.66
bablu048 said:
great first take a nandroid.
finding the correct su is hit and trial method. generally su 2.62-3 worked. try other su's 2.65,2.66
Click to expand...
Click to collapse
Ok, I get it now. I backup my device with nandroid to make sure I have it there in case something goes wrong. If I have no info I want to save (my phone is blank, it's factory resetted from the bootloader unlocking) is it still necessary to nandroid? It's necessary in case a su fails right?
nandroid backup takes a backup of your OS with data and everything.
I think you didn't allow/system to be modified when you first booted into twrp. that's why su is failing, as su modifies the /system partition.
bablu048 said:
nandroid backup takes a backup of your OS with data and everything.
I think you didn't allow/system to be modified when you first booted into twrp. that's why su is failing, as su modifies the /system partition.try
Click to expand...
Click to collapse
by now, my MXP is factory resetted, I'm trying to read more before doing anything.
Since is factory resetted, it doesn't have developer mode (oem unlocking, usb debugging). I still see TWRP in recovery mode.
I suppose if I want to try another SU, I have to enable develper of course, oem-usb, obviously. Do I have to flash TWRP again? Or can I just try a SU? Of course, after having done a nandroid.
fsae3 said:
by now, my MXP is factory resetted, I'm trying to read more before doing anything.
Since is factory resetted, it doesn't have developer mode (oem unlocking, usb debugging). I still see TWRP in recovery mode.
I suppose if I want to try another SU, I have to enable develper of course, oem-usb, obviously. Do I have to flash TWRP again? Or can I just try a SU? Of course, after having done a nandroid.
Click to expand...
Click to collapse
you don't need to take nandroid backup always, once is sufficient unless you want to backup the latest data. no need to flash twrp again. just flash su.
take a nandroid backup once (everything system, boot, data) . after successfully flashing su you can keep another backup that contains su.
bablu048 said:
you don't need to take nandroid backup always, once is sufficient unless you want to backup the latest data. no need to flash twrp again. just flash su.
take a nandroid backup once (everything system, boot, data) . after successfully flashing su you can keep another backup that contains su.
Click to expand...
Click to collapse
ok, finally! My device is rooted. Thanks a lot!
I think I forgot to select external storage when taking a nandroid, so it went into internal storage, it filled a little more than 5 GB. I can't see this backup neither in TWRP, PC or an android file explorer. How can I get rid of those 5 GB? I take a nandroid on external storage and already copied it in my PC.
Is there a way via TWRP to get rid of it? Wiping something? I'm very cautios from now on.
it's stored at /data/media/twrp delete those backups. or boot into twrp >restore> it'll show all the backups delete those.
edit: Im stuck in the "watery logo" I need help unistalling SU can some1 point me to that guide?
I've already flashed SuperSU 2.62-3
edit 2: I flashed SU 2.65 and it did the trick! solved, i think
original post:
Hi guys hope you can help me
I have a XT1563, single sim. I unlocked bootloader, flashed recovery, went directly to TWRP to flash SuperSU v2.46, it finished, I restarted using TWRP option but hasnt restarted is stuck in the warning screen "Warning bootloader unlocked...your device's bootloader has been unlock...." I do not know what to do
I press power-off and any key combination and it doesnt do anything is just stuck at that warning screen. Unlike the OP I dont get the watery logo
Hello,
i need help. I messed up my phone while trying to repair my only read mode system partition after boot.
Current state:
Phone CAN-L11 with EU Firmeware and working TWRP Recovery.
I did a full wipe, but have no data partition to restore, because this couldn´t be saved with twrp while i made my first nand backups during no read access to data partition.
My phone always shows 2 times the huawei logo and then boot in erecovery from huawei where i tried to restore, but it shows always "fail to get data" (wifi works).
When i restore all partitions backups that i own via twrp i miss the data partition (is the cause why it wont boot - isn´t it?)
Now i searched for any img that i can use to get my phone working again - anyone has a tip what img i could use (i have a huawei update extractor) - through twrp or fastboot.
Could anyone help me with a twrp backup or a img file of data partition - or has another tip how to get my phone working again?
Thanks for tips!
merlin21 said:
Hello,
i need help. I messed up my phone while trying to repair my only read mode system partition after boot.
Current state:
Phone CAN-L11 with EU Firmeware and working TWRP Recovery.
I did a full wipe, but have no data partition to restore, because this couldn´t be saved with twrp while i made my first nand backups during no read access to data partition.
My phone always shows 2 times the huawei logo and then boot in erecovery from huawei where i tried to restore, but it shows always "fail to get data" (wifi works).
When i restore all partitions backups that i own via twrp i miss the data partition (is the cause why it wont boot - isn´t it?)
Now i searched for any img that i can use to get my phone working again - anyone has a tip what img i could use (i have a huawei update extractor) - through twrp or fastboot.
Could anyone help me with a twrp backup or a img file of data partition - or has another tip how to get my phone working again?
Thanks for tips!
Click to expand...
Click to collapse
I think that you need a system.img, so you can flash. This system imagem would write everything you need, so you can boot normally.
Have you tried to dowload @bluesmoothie backup from dropbox from the Root and Recovery post?
Here is the link, in case you don't find it https://www.dropbox.com/sh/qrk0fbpn5rnukxn/AAAmhFwBTNoqq0sWfCH-VMHLa?dl=0
Sent from my victara using XDA Labs
Here the full Backup for the CAN-L11:
https://drive.google.com/open?id=0B134drJ4-Ed0R3VSY3A5NGpjVWc
Format /data, reboot recovery and than restore from backup. After the restore is complete make a wipe.
I restored my system from twrp (original first save). But that did not help.
After that i loaded the can-L11c432 update.zip from huawei and extracted with others the system.img - that also did not help to boot.
Tomorrow i flashed the orignal recovery.img from c432 but i did not find an update.zip wich works to manually flash in stock recovery.
@Vinnom the link you shared leads to twrp.img (no system.img).
@-=MoRpH=- thanks, i will try and report back. Is this anyway a chinese version in there? I think i have the same struggle you had days back. Is your phone completely working again?
So sick that my phone did not work. Now working with my "old" LG G2...
I report back later - first family dinner
merlin21 said:
I restored my system from twrp (original first save). But that did not help.
After that i loaded the can-L11c432 update.zip from huawei and extracted with others the system.img - that also did not help to boot.
Tomorrow i flashed the orignal recovery.img from c432 but i did not find an update.zip wich works to manually flash in stock recovery.
@Vinnom the link you shared leads to twrp.img (no system.img).
@-=MoRpH=- thanks, i will try and report back. Is this anyway a chinese version in there? I think i have the same struggle you had days back. Is your phone completely working again?
So sick that my phone did not work. Now working with my "old" LG G2...
I report back later - first family dinner
Click to expand...
Click to collapse
Inside the folder twrp and its subfolders there it is system.img. I'm downloading it myself.
Sent from my victara using XDA Labs
Share if you have another workarounds for me
Gesendet von meinem LG-D802 mit Tapatalk
@merlin21 yes it sounds like my problem after I tried to flash the emui5 beta.
My phone is fully working again with the backup I posted.
This is not the Chinese version, if nothing works, you can try the caz ROM. But there are massive problems with the gapps, they are not included in the rom.
Gesendet von meinem HUAWEI CAN-L11 mit Tapatalk
@ -=MoRpH=-
i just flashed the twrp.img with fastboot from xelfmade v22.12. and then rebooted twrp.
Then formated data and confirmed with yes - rebooted recovery and tried to restore your twrp. It did not restore and aborted instantly with the error message
during restoreing cust...
extractTarFork() proecess ended with ERROR: 255
what could that be?
IT WORKS! Thanks @murph... I had to use the cust from my backup, but with your data partition it successfully booted again. Locking forward if i now have still the problem with read only system partition. I am away setting up phone again (and of course rooting, modifying etc.. but FIRST do a full backup after basic setup and safe in PC !!!)
Thanks!
P.S. how did you manage to back up data partition in recovery? I thought this wouldn't be possible?! What is the cost for having this full working twrp?
PPS. Somehow knock on screen for screenshot does not work - could be, that i have to log in with huawei id... does it work for you morp?
Somehow knock on screen for screenshot does not work - could be, that i have to log in with huawei id... does it work for you morp?
Click to expand...
Click to collapse
That only work if the is not rooted... Idk whats up with that, but for now i use the quicksetting screenshot function.
Somehow it worked with my rooted device before. Must be the decrypted data partition?
With the recovery of your backup I could not access data or change memory from data to sd. What version do you use?
I flashed xelfmades v22 and now have rw access and could backup all partitions and restore. Root and xposed modules everything works, just the knock on screen to capture don't...
merlin21 said:
IT WORKS! Thanks @murph... I had to use the cust from my backup, but with your data partition it successfully booted again. Locking forward if i now have still the problem with read only system partition. I am away setting up phone again (and of course rooting, modifying etc.. but FIRST do a full backup after basic setup and safe in PC !!!)
Thanks!
P.S. how did you manage to back up data partition in recovery? I thought this wouldn't be possible?! What is the cost for having this full working twrp?
PPS. Somehow knock on screen for screenshot does not work - could be, that i have to log in with huawei id... does it work for you morp?
Click to expand...
Click to collapse
I have the same problem! What do you mean by "I had to use the cust from my backup" ? Sadly i dont have any data from my own backup..
can you tell me what to do to get the backup from @murph to work without error?
--solved.
P1xl said:
--solved.
Click to expand...
Click to collapse
May I ask how?
I'm kinda stuck personnaly. I have tried both Nand backups but no cigar. Still can't boot. I had the Data issue which I managed to get rid of.
I still end up with a ExtTarFork 255 kind of error. I tried to change the files attributes via adb shell, but it failed so I've got an OS-Less phone...
Any help would be greatly appreciated.
rak500 said:
May I ask how?
I'm kinda stuck personnaly. I have tried both Nand backups but no cigar. Still can't boot. I had the Data issue which I managed to get rid of.
I still end up with a ExtTarFork 255 kind of error. I tried to change the files attributes via adb shell, but it failed so I've got an OS-Less phone...
Any help would be greatly appreciated.
Click to expand...
Click to collapse
I copied the backup, which is linked somewhere in this thread, to my sdcard and restored it on my Nova using twrp. The extractfork issue showed up while restoring '/cust' so i disselected cust in the restoring menu. After that the restoring worked and my nova was able to boot.
Hope this is any help to you.
P1xl said:
I copied the backup, which is linked somewhere in this thread, to my sdcard and restored it on my Nova using twrp. The extractfork issue showed up while restoring '/cust' so i disselected cust in the restoring menu. After that the restoring worked and my nova was able to boot.
Hope this is any help to you.
Click to expand...
Click to collapse
That didn't do the trick for a while, or I might have forgotten a step, but deselecting CUST did the trick.
Thanks for the tip!
Although, maybe flashing the Cust partition I found in one of the two upgrade zips via fastboot might have helped? I dunno...
But in short, for those who haven't followed through, here's what I did, but I'm not sure this is why it worked:
1. Bricked my device : be sad;
2. DLed all the posted Nandroid backup on this thread and others;
3. With fastboot, reflashed TWRP from Xelfmade using "fastboot flash recovery twrp.img";
4. Flashed the CUST.img I found in the UPDATE.APP of the update_data_full_CAN-L11_hw_eu.zip; or maybe the other, only one of the two seem to have it; I extracted it using Huawei Firmware Extractor; using "fastboot flash cust cust.img";
5. Created a "fake" backup to create the right folder structure on my SD (TWRP Couldn't see the backups) and put the Nandroid Backups I DLed earlier in it;
6. Reboot in TWRP and Restore all partitions except CUST;
7. Reboot, sweat, wait, cry, roll on the floor in fear, heard the huawei startup sound, cried as if it was my first born child;
8. Setup the fone and profit; then enjoy Nova goodness;
92.324. and probably most important, TWRP BAAAACKUUUUP!!!!!
All done!
Thanks for your help my phone is saved with your method!!!
i downgraded my MLA-L03 variant with this, but now im stuck in french language with no other languages to choose from
Vinnom said:
I think that you need a system.img, so you can flash. This system imagem would write everything you need, so you can boot normally.
Have you tried to dowload @bluesmoothie backup from dropbox from the Root and Recovery post?
Here is the link, in case you don't find it https://www.dropbox.com/sh/qrk0fbpn5rnukxn/AAAmhFwBTNoqq0sWfCH-VMHLa?dl=0
Sent from my victara using XDA Labs
Click to expand...
Click to collapse
someone please make this thread sticky!!!!!!!
there are some guides in internet how to get nougat for nova and that is were I broke my phone. I was searching solutions for a week, DLed Flahsed tons of things nothing worked. this one fully worked!!!!!!!!!!!!!!!!!!!!
rak500 said:
That didn't do the trick for a while, or I might have forgotten a step, but deselecting CUST did the trick.
Thanks for the tip!
Although, maybe flashing the Cust partition I found in one of the two upgrade zips via fastboot might have helped? I dunno...
But in short, for those who haven't followed through, here's what I did, but I'm not sure this is why it worked:
1. Bricked my device : be sad;
2. DLed all the posted Nandroid backup on this thread and others;
3. With fastboot, reflashed TWRP from Xelfmade using "fastboot flash recovery twrp.img";
4. Flashed the CUST.img I found in the UPDATE.APP of the update_data_full_CAN-L11_hw_eu.zip; or maybe the other, only one of the two seem to have it; I extracted it using Huawei Firmware Extractor; using "fastboot flash cust cust.img";
5. Created a "fake" backup to create the right folder structure on my SD (TWRP Couldn't see the backups) and put the Nandroid Backups I DLed earlier in it;
6. Reboot in TWRP and Restore all partitions except CUST;
7. Reboot, sweat, wait, cry, roll on the floor in fear, heard the huawei startup sound, cried as if it was my first born child;
8. Setup the fone and profit; then enjoy Nova goodness;
92.324. and probably most important, TWRP BAAAACKUUUUP!!!!!
All done!
Click to expand...
Click to collapse
Hi. First of all, thanks for the tutorial. I've tried it but I have one problem. My /data particion is ext4. Should be f2fs. The thing is I can't convert coz my /data particion is unvisible
Can any help, please?
Bunkier said:
Hi. First of all, thanks for the tutorial. I've tried it but I have one problem. My /data particion is ext4. Should be f2fs. The thing is I can't convert coz my /data particion is unvisible
Can any help, please?
Click to expand...
Click to collapse
Frankly, I don't know. I had not modified the partitions prior to bricking my phone, so I think the partitioning was OK. However, I think one of the TWRP availble in this forum can format Data partition properly, which would utlimately allow you to select which File Format you want. I haven't tried it myself, and I haven't been able to do much with TWRP since I flashed Lineage unfortunately. Most of my Mods were just upgrading and I had to ADB Sideload pretty much everything since I flashed Lineage...
Sorry I couldn't be more helpful than that!
I have installed FreedomOS on my OnePlus 5. I'm not sure if this is related to FreedomOS, but when I try to make a backup in TWRP with data, system, and boot, it has an error with createTarFork() shortly after it gets to backing up data. It also says 'read only filesystem' when I try to open Terminal from Advanced and run 'cd /data/media/0/TWRP/BACKUPS/bad7d639 && rm -rf backup-name'. What can I do to fix this and why is this happening?
EDIT: I have 32GB storage left
I had error 255 when restoring the data partition on my elephone p9000, for me it was because it was a bad data write and it was corrupt.
Pro4TLZZ said:
I had error 255 when restoring the data partition on my elephone p9000, for me it was because it was a bad data write and it was corrupt.
Click to expand...
Click to collapse
What was corrupt? How did you fix it?
keeganjk said:
What was corrupt? How did you fix it?
Click to expand...
Click to collapse
Something in the partition, so I didn't restore that
Pro4TLZZ said:
Something in the partition, so I didn't restore that
Click to expand...
Click to collapse
Which partition? I just wiped my device and reinstalled FreedomOS.
keeganjk said:
Which partition? I just wiped my device and reinstalled FreedomOS.
Click to expand...
Click to collapse
Userdata partition
Pro4TLZZ said:
Userdata partition
Click to expand...
Click to collapse
OK.
Pro4TLZZ said:
Userdata partition
Click to expand...
Click to collapse
I wiped my device and reinstalled FreedomOS, it still shows up with the same error.
keeganjk said:
I wiped my device and reinstalled FreedomOS, it still shows up with the same error.
Click to expand...
Click to collapse
I'm sorry I can't help you more
Hi guy, i had the problem, try to flash blue spark recovery and retry restore, if rom bootloops, try to dirty flash your rom
I just wiped and reinstalled OxygenOS http://downloads.oneplus.net/oneplus-5/oneplus_5_oxygenos_4.5.10/. Once I reconfigure all my settings, files, etc, I'm going to see if it works.
dago said:
Hi guy, i had the problem, try to flash blue spark recovery and retry restore, if rom bootloops, try to dirty flash your rom
Click to expand...
Click to collapse
What's the difference between TWRP and bluspark TWRP?
dago said:
Hi guy, i had the problem, try to flash blue spark recovery and retry restore, if rom bootloops, try to dirty flash your rom
Click to expand...
Click to collapse
I can't restore; I deleted all my backups in an attempt to free up space.
I think I found the solution!
1. Go to Wipe in TWRP, swipe to factory reset
2. Download:
OnePlus Recovery: http://oxygenos.oneplus.net.s3.amazonaws.com/OP5_recovery.img
OxygenOS: http://oxygenos.oneplus.net.s3.amaz...3_OTA_015_all_1708252353_e6d7756780064352.zip
3. Rename recovery image as recovery.img, boot phone into fastboot, plug into computer, run these commands on the computer:
fastboot devices
fastboot flash recovery recovery.img
fastboot boot recovery.img
4. Open recovery on phone
5. Select Forgot Password, will wipe all leftover files in SD Card.
6. Boot back into recovery, select reload, select Install over ADB or Install Over USB or something similar and plug phone into computer.
7. Run 'adb sideload oxygen-os-filename' without quotes on computer.
8. Let it install OxygenOS, it may appear to be frozen at some points; it probobaly isn't, so don't shut it off or unplus USB.
9. Download Bluspark TWRP: https://forum.xda-developers.com/devdb/project/dl/?id=26601&task=get
9. Reboot into fastboot, plug into computer and run these commands on the computer:
fastboot devices
fastboot flash recovery bluspark-twrp-filename-location.img
fastboot boot bluspark-twrp-filename-location.img
10. Success (hopefully)
Oh. Wait. Now it has the same error when I try to make a backup. (I feel like it might be from installing https://forum.xda-developers.com/android/software-hacking/kali-nethunter-magisk-t3676681, but they say it's unrelated). Doors anyone know why this is happening again?
the solution to this was to boot to your previous rom that u have made nandroid backup with and then setting up the same password/pin in settings > security. When you then boot into twrp it will ask you for the pin/password to decrypt your data partition and then you can flash the nandroid backup(you have to have the same password there). here it is obvious that you are trying to flash data partition that uses different encryption password (in case of stock rom there is non) and this obviously wont happen.
maybe another solution would be to connect externally usb and unmounting data partition and then restoring from usb...
I'm having the exact same issue, but trying to create a Nandroid, not restoring one. Happened on Codeworkx TWRP 20180414. I always remove my passwords, fingerprint, pattern, and face data before I backup, update, etc. since I'm encrypted to avoid issues, and it still happened. I flashed the latest blu_spark TWRP and got the exact same error in the same spot in the data partition backup.
Never had an issue like this before. I even tried saving the data partition separately and still got the same error. Very strange indeed.
All other partitions backup without issue.
I'm on xXx v10.5 w/ ElementalX v3.04, Encrypted
If anyone has any insight, it would be greatly appreciated.
Thanks much!
?
Need4Sneed said:
I'm having the exact same issue, but trying to create a Nandroid, not restoring one. Happened on Codeworkx TWRP 20180414. I always remove my passwords, fingerprint, pattern, and face data before I backup, update, etc. since I'm encrypted to avoid issues, and it still happened. I flashed the latest blu_spark TWRP and got the exact same error in the same spot in the data partition backup.
Never had an issue like this before. I even tried saving the data partition separately and still got the same error. Very strange indeed.
All other partitions backup without issue.
I'm on xXx v10.5 w/ ElementalX v3.04, Encrypted
If anyone has any insight, it would be greatly appreciated.
Thanks much!
?
Click to expand...
Click to collapse
For me flashing normal oxygenos with magisk 16 and formatting data and trying to make it boot with the new flash and then rebooting into recovery and restoring made it work. I guess it has to do with the right filesystem having to be made first.
hi guys,
i've read all the thread in XDA related to ERROR 255, can't find anything to solve my problem trying to backup on TWRP ending with this error 255.?
I'm not using any parallel apps, not using Apps Locker, don't have any folder 999 (searched using Root Browser).
I've tried deleting all fingerprint, face unlock and screenlock as well.
No joy.
I'm using latest TWRP 3.2.2-1, OOS 5.1.7, Rooted.
Appreciate any help or sharing experience.
I tried creating a system backup through TWRP just now for the first time ever. Throughout the process, it gave me multiple messages saying "unable to mount data" and the same for some other folders, and when the backup supposedly finished, it just said failed.
Is there anything I can try without actually wiping either of the partitions? This obviously because I'm trying to create a backup so I can wipe afterwards.
cyborgium said:
I tried creating a system backup through TWRP just now for the first time ever. Throughout the process, it gave me multiple messages saying "unable to mount data" and the same for some other folders, and when the backup supposedly finished, it just said failed.
Is there anything I can try without actually wiping either of the partitions? This obviously because I'm trying to create a backup so I can wipe afterwards.
Click to expand...
Click to collapse
In twrp main menu screen select ' Mount ' menu and make sure mount data is ticked then go back and try backing up again.
spawnlives said:
In twrp main menu screen select ' Mount ' menu and make sure mount data is ticked then go back and try backing up again.
Click to expand...
Click to collapse
Thanks for your reply, it doesn't actually let me tick that box. Nothing happens when I tick it. It also says that the data partition is 0mb. Any idea what that might mean?
cyborgium said:
Thanks for your reply, it doesn't actually let me tick that box. Nothing happens when I tick it. It also says that the data partition is 0mb. Any idea what that might mean?
Click to expand...
Click to collapse
Which version of twrp are you using
Latest is 3.2.3.0 which should fix the data issue ( it"s a known issue).
spawnlives said:
Which version of twrp are you using
Latest is 3.2.3.0 which should fix the data issue ( it"s a known issue).
Click to expand...
Click to collapse
That's the TWRP version that I've got installed.
I just reinstalled both stock firmware and reflashed TWRP but the exact same issue persists. At first I was able to mount data though, I could flash zips such as Magisk etc. But after having set everything up again on my phone, I couldn't mount data anymore.
cyborgium said:
That's the TWRP version that I've got installed.
I just reinstalled both stock firmware and reflashed TWRP but the exact same issue persists. At first I was able to mount data though, I could flash zips such as Magisk etc. But after having set everything up again on my phone, I couldn't mount data anymore.
Click to expand...
Click to collapse
Not sure on your steps to install twrp
Have you tried going into twrp in wipe menu and format data
spawnlives said:
Not sure on your steps to install twrp
Have you tried going into twrp in wipe menu and format data
Click to expand...
Click to collapse
Maybe I wasn't very clear.
I flash the stock firmware, set that up to enable OEM unlock. Then flash TWRP, wipe /data, flash magisk and other required zips (at this point, data is mounted). I then set that all up however I want, install apps etc.
If I want to create a backup after all that, it doesn't work cause of the unable to mount /data and /storage.
cyborgium said:
Maybe I wasn't very clear.
I flash the stock firmware, set that up to enable OEM unlock. Then flash TWRP, wipe /data, flash magisk and other required zips (at this point, data is mounted). I then set that all up however I want, install apps etc.
If I want to create a backup after all that, it doesn't work cause of the unable to mount /data and /storage.
Click to expand...
Click to collapse
Sounds like your device is still encrypted
Did you flash the no Verity encrypt zip file
Also I said to format data not wipe.
In the mount menu these are the options I have enabled.
spawnlives said:
Sounds like your device is still encrypted
Did you flash the no Verity encrypt zip file
Also I said to format data not wipe.
In the mount menu these are the options I have enabled.
Click to expand...
Click to collapse
You're right, I formatted data, not wipe.
I did flash the no verity zip, does the order in which I flash Magisk, no-verity and RMM state unlock matter?
cyborgium said:
You're right, I formatted data, not wipe.
I did flash the no verity zip, does the order in which I flash Magisk, no-verity and RMM state unlock matter?
Click to expand...
Click to collapse
The instructions I followed to install twrp
Flash twrp (which you have done)
Format data
When finished reboot back into twrp(use twrp reboot menu option)
Flash no-verity zip via twrp ( have to make sure you have it on internal storage or SD card)
Then flash everything else
Not sure if you need RMM state unlock if your bootloader(OEM) is already unlocked in developer options though.
spawnlives said:
The instructions I followed to install twrp
Flash twrp (which you have done)
Format data
When finished reboot back into twrp(use twrp reboot menu option)
Flash no-verity zip via twrp ( have to make sure you have it on internal storage or SD card)
Then flash everything else
Not sure if you need RMM state unlock if your bootloader(OEM) is already unlocked in developer options though.
Click to expand...
Click to collapse
I've just done everything you stated above, still the same issue, can't mount /data.
Really don't understand what it is that im doing wrong or if I'm even doing anything wrong..
Thanks for your help anyway though, appreciate it.
cyborgium said:
I've just done everything you stated above, still the same issue, can't mount /data.
Really don't understand what it is that im doing wrong or if I'm even doing anything wrong..
Thanks for your help anyway though, appreciate it.
Click to expand...
Click to collapse
Just as matter of curiosity I use FX file explorer (root) in the menu filesystem it should tell you what format your data partition is mine or ext4. I have read that some people through twrp have changed it to something like ext3 and then back to ext4
Also this is the thread I used to install my twrp
https://forum.xda-developers.com/ga...pment/recovery-twrp-galaxy-s8-exynos-t3595102
This thread may also help you out
https://forum.xda-developers.com/ga...ment/fix-data-mount-fix-s8-twrp-oreo-t3769254
spawnlives said:
Just as matter of curiosity I use FX file explorer (root) in the menu filesystem it should tell you what format your data partition is mine or ext4. I have read that some people through twrp have changed it to something like ext3 and then back to ext4
Also this is the thread I used to install my twrp
https://forum.xda-developers.com/ga...pment/recovery-twrp-galaxy-s8-exynos-t3595102
This thread may also help you out
https://forum.xda-developers.com/ga...ment/fix-data-mount-fix-s8-twrp-oreo-t3769254
Click to expand...
Click to collapse
I think that second thread you linked may have done the trick.
At first it didn't seem to help, but when I tried it again after reflashing everything, I am now able to mount /data.
I'm still in the dark as to why this happened and hasn't happened to anyone else other than the person who created that file, but either way, thank you very much for your help.
cyborgium said:
Maybe I wasn't very clear.
I flash the stock firmware, set that up to enable OEM unlock. Then flash TWRP, wipe /data, flash magisk and other required zips (at this point, data is mounted). I then set that all up however I want, install apps etc.
If I want to create a backup after all that, it doesn't work cause of the unable to mount /data and /storage.
Click to expand...
Click to collapse
Try the modded twrp from nx thread