Related
Hey all
I just downloaded the latest stock firmware I9301IXCUANJ4 and after installation my stock camera app wasn't starting and gave me message "Camera server Error" So in reflashed firmware again and after that same problem occured so i contacted samsung and the already had reports of the bug and they are pulling it back for my region (the Netherlands )
So if any1 want the latest firmware go for the italion version that one is solid and has some battery drain improvement
How can i instal him? With kies or odin?
Sent from my GT-I9301I using XDA Free mobile app
Scarfangs said:
How can i instal him? With kies or odin?
Sent from my GT-I9301I using XDA Free mobile app
Click to expand...
Click to collapse
i installed it with odin
Im from italy dont know but i get some update on the phone 15mb size. I just accept and my phone go of and start to load some instalation after instalation someting about 110 application and then done my phone was one. This is the update or i need to instali with odin?
Sorry for my english
Sent from my GT-I9301I using XDA Free mobile app
Caimarcladev said:
i installed it with odin
Click to expand...
Click to collapse
have some problem with this new firmware camera dont work when you install i have also Luxembourg firmware run on my device i have juste downgrade to I9301IXXUANH1_I9301IPHNANG1_I9301IXXUANF2_HOME and now camera are work normaly
Caimarcladev said:
Hey all
I just downloaded the latest stock firmware I9301IXCUANJ4 and after installation my stock camera app wasn't starting and gave me message "Camera server Error" So in reflashed firmware again and after that same problem occured so i contacted samsung and the already had reports of the bug and they are pulling it back for my region (the Netherlands )
So if any1 want the latest firmware go for the italion version that one is solid and has some battery drain improvement
Click to expand...
Click to collapse
Hello, please do not say the latest version, because the last version has the camera bug as well.
The last confirmed working version is I9301IXXUANI1_I9301IITVANJ1_I9301IXXUANI2_HOME
I had just downgraded back from installing I9301IXCUANJ6, from the italian region. Hopefully it will avoid useless data wipes for other people :good:
Caimarcladev said:
Hey all
I just downloaded the latest stock firmware I9301IXCUANJ4 and after installation my stock camera app wasn't starting and gave me message "Camera server Error" So in reflashed firmware again and after that same problem occured so i contacted samsung and the already had reports of the bug and they are pulling it back for my region (the Netherlands )
So if any1 want the latest firmware go for the italion version that one is solid and has some battery drain improvement
Click to expand...
Click to collapse
Wich is the latest version? I9301IXCUANJ6 ?
xCoNDex said:
Wich is the latest version? I9301IXCUANJ6 ?
Click to expand...
Click to collapse
depending region from wher you are
spawk said:
depending region from wher you are
Click to expand...
Click to collapse
I have been testing all roms stock mentioned on xda forums and no one works, my camera is tottaly dead.....
xCoNDex said:
I have been testing all roms stock mentioned on xda forums and no one works, my camera is tottaly dead.....
Click to expand...
Click to collapse
yesterday i have flashed new firmware and got camera not work i have lanched odine and chek nand errase if uncheked and flashed downgrade old firmware and now camera are work but i have loste all my old setting and apps because errase del all your previous phone and install system from 0 test and you see
spawk said:
yesterday i have flashed new firmware and got camera not work i have lanched odine and chek nand errase if uncheked and flashed downgrade old firmware and now camera are work but i have loste all my old setting and apps because errase del all your previous phone and install system from 0 test and you see
Click to expand...
Click to collapse
Flashed with Nand erased disables, is that ok right?
I purchased my phone on spain, but its from ITA, im gonna test the last rom stock for this region, is the last thing left to prove
xCoNDex said:
Flashed with Nand erased disables, is that ok right?
I purchased my phone on spain, but its from ITA, im gonna test the last rom stock for this region, is the last thing left to prove
Click to expand...
Click to collapse
no flash with nand erased enabled
Again Camera Bug ( Server error)
spawk said:
yesterday i have flashed new firmware and got camera not work i have lanched odine and chek nand errase if uncheked and flashed downgrade old firmware and now camera are work but i have loste all my old setting and apps because errase del all your previous phone and install system from 0 test and you see
Click to expand...
Click to collapse
Hi Spark,
as some other users I have my problems with the Camera Bug. I flashed four in this forum recommended ROMs with wiping each time Cache, System and Internal Storage , and activated Nand Erase before flashing with Odin. But each time the error message appears again.
That somehow drives me crazy. Idon't know wht to do else. Any Idea?
Galaxy S3 Neo
Hello people
Great news, to fix S3 Neo camera server error you need to install stock rom I9301IXXUANH1 from Sammobile.
It really works
does any1 knows if the lates version (I9301IXXUANG1 from open Austria ) also has the camera bug?
cause they say this is the best firmware version with the lowest battery usage
New Phone (for mum ) and I thought lets flash new FW for Germany DBT for it... What the f**k! Camera stop working with this well known Server issue!
Its an GT-I9301I for European Region. Bought in Germany.
This one made the camera working again for me!
I9301IXCUANL1 - CYV - 08.12.2014
http://samsung-updates.com/details/40228/Galaxy_S3_Neoplus/GT-I9301I/CYV/I9301IXCUANL1.html
And this one works also
I9301IXCUAOA1 - PHE - 09 Jan 2015
http://www.sammobile.com/firmwares/download/42204/I9301IXCUAOA1_I9301IPHEAOA1_PHE.zip/
Thanks goodness. Thought I bricked the phone right out of the box
Thanks to this thread for kicking me in the right direction!
when you bought the phone had the version XXUAN ... but if flashi firmware XCUAN .... the camera will not work and will fail. If you would like to solve the problem you have to flash the firmware again that had your phone when it was bought
fraross said:
when you bought the phone had the version XXUAN ... but if flashi firmware XCUAN .... the camera will not work and will fail. If you would like to solve the problem you have to flash the firmware again that had your phone when it was bought
Click to expand...
Click to collapse
that's right. we've got 2 versions with 2 cameras. xc camera and xx camera. this is not a bug. people just flash the appropriate rom for each. don't mix.
If it's not a bug, than why does the official ota flash the wrong update?
putti71 said:
If it's not a bug, than why does the official ota flash the wrong update?
Click to expand...
Click to collapse
Maybe because OTA will flash updates for the current installed firmware. For example if you have got a XCUAN firmware OTA will fash the updated version for XCUAN. if you have got a XXUAN firmware OTA will fash the updated version for XXUAN. if the camera won't work after the update you have to install the correct update manually. You can find firmwares on SAMMOBILE
mine also WIFI CANT BE TURNED ON after update i do have root access but before the update i unroot-ed and removed SD card.
1. phone - samsung grand prime SM-530H /DD
2. issue - wifi cant be turned/switched on
3. issue started - after update, ie updated via Kies3
4. things done to fix - hard reset, pulled out battery, changed named of wifi settings confg (which dint help so i reversed it again) and so on
5. current firmware -
Model SM-G530H
Model name GALAXY Grand Prime
Country India
Version Android 4.4.4
Build date Wed, 18 Mar 2015 08:56:02 +0000
Product code INS
PDA G530HXXU2AOC2
CSC G530HODD2AOA1
(this description of firmware is from Sammobile.com but its the same description on my phone and as i said before i updated via Kies3)
urmyaddict said:
mine also WIFI CANT BE TURNED ON after update i do have root access but before the update i unroot-ed and removed SD card.
1. phone - samsung grand prime SM-530H /DD
2. issue - wifi cant be turned/switched on
3. issue started - after update, ie updated via Kies3
4. things done to fix - hard reset, pulled out battery, changed named of wifi settings confg (which dint help so i reversed it again) and so on
5. current firmware -
Model SM-G530H
Model name GALAXY Grand Prime
Country India
Version Android 4.4.4
Build date Wed, 18 Mar 2015 08:56:02 +0000
Product code INS
PDA G530HXXU2AOC2
CSC G530HODD2AOA1
(this description of firmware is from Sammobile.com but its the same description on my phone and as i said before i updated via Kies3)
Click to expand...
Click to collapse
Reflash it. I had the same problem. I reflashed it and it was gone. Though I did it via Odin. btw, I have the same firmware installed. So, its not a problem with firmware.
Kade Sonix said:
Reflash it. I had the same problem. I reflashed it and it was gone. Though I did it via Odin. btw, I have the same firmware installed. So, its not a problem with firmware.
Click to expand...
Click to collapse
oh yeah It worked. thnks for advice man.
RE-FLASHING helped.
plz help me i have the same problem after updat
Kade Sonix said:
Reflash it. I had the same problem. I reflashed it and it was gone. Though I did it via Odin. btw, I have the same firmware installed. So, its not a problem with firmware.
Click to expand...
Click to collapse
how to reflash my mobile
beso30 said:
how to reflash my mobile
Click to expand...
Click to collapse
Flash the firmware through Odin.
i did but still the same problem
Kade Sonix said:
Flash the firmware through Odin.
Click to expand...
Click to collapse
thanks guys ......really i am very happy ...its work finally
beso30;61834783:good::good::good::good::good::good::good::good::good::good::good::D:D:D:D:D:D:D:D[/QUOTE said:
to help other ....what i did wrong is .
before every time i re-flash my mobile ... i reset factory
the way how its work for me
1 unroot my mobile by supersu
2 iam use the same firmware ..which i updat before by kies3
now its work .....thanks all ......
Click to expand...
Click to collapse
Samsung SM-G530H After Flash Camera, Wi-Fi, Bluetooth Not Work Solution
HI ALL
G530H_XXS2BPK4
AFTER FLASH G530HXXU2BOJ3_G530HOJV2BOJ2_5.0.2
Samsung SM-G530H After Flash Camera, Wi-Fi, Bluetooth Not Work Solution
hello, i am from India. I recently bought a new Samsung Galaxy S7 Edge Duos. FEW DAYS AGO (ABOUT 2-3 DAYS) i updated it to latest version over OTA. I tried to root it by CF Auto root but something broke and it transferred my device in bootloop so i downloaded and flashed a stock rom G935FXXU1APB6_G935FOLB1APB6_XSP_FULL using Odin. My device started but i figured out that the rom is Singaporian version and its a March upgrade and i could not update it also. I am also having wifi connectivity issues. My old rom was perfect. It was preinstalled by Company. Please help me or please give me a link of my model's official stock rom rather than Sammobile ( i tried sammobile but my connection refuses and also speed too low )
UPDATE: Also my carrier works.......
PLzzzzzz Help......
Device specifications
Model Number SM-G935FD
BASEBAND VERSION G935FXXU1APEQ
BUILD NUMBER MMB29K.G935FXXU1APB6
gurpreet4u15 said:
hello, i am from India. I recently bought a new Samsung Galaxy S7 Edge Duos. FEW DAYS AGO (ABOUT 2-3 DAYS) i updated it to latest version over OTA. I tried to root it by CF Auto root but something broke and it transferred my device in bootloop so i downloaded and flashed a stock rom G935FXXU1APB6_G935FOLB1APB6_XSP_FULL using Odin. My device started but i figured out that the rom is Singaporian version and its a March upgrade and i could not update it also. I am also having wifi connectivity issues. My old rom was perfect. It was preinstalled by Company. Please help me or please give me a link of my model's official stock rom rather than Sammobile ( i tried sammobile but my connection refuses and also speed too low )
UPDATE: Also my carrier works.......
PLzzzzzz Help......
Device specifications
Model Number SM-G935FD
BASEBAND VERSION G935FXXU1APEQ
BUILD NUMBER MMB29K.G935FXXU1APB6
Click to expand...
Click to collapse
Download this and Flash I was on latest version rooted flashed this and got all the latest updates..
PS : I am using s7 Edge SM-G935FD
[email protected] said:
Download this and Flash I was on latest version rooted flashed this and got all the latest updates..
PS : I am using s7 Edge SM-G935FD
Click to expand...
Click to collapse
Tx vry much for help but can you give a link rather than sammobile
gurpreet4u15 said:
hello, i am from India. I recently bought a new Samsung Galaxy S7 Edge Duos. FEW DAYS AGO (ABOUT 2-3 DAYS) i updated it to latest version over OTA. I tried to root it by CF Auto root but something broke and it transferred my device in bootloop so i downloaded and flashed a stock rom G935FXXU1APB6_G935FOLB1APB6_XSP_FULL using Odin. My device started but i figured out that the rom is Singaporian version and its a March upgrade and i could not update it also. I am also having wifi connectivity issues. My old rom was perfect. It was preinstalled by Company. Please help me or please give me a link of my model's official stock rom rather than Sammobile ( i tried sammobile but my connection refuses and also speed too low )
UPDATE: Also my carrier works.......
PLzzzzzz Help......
Device specifications
Model Number SM-G935FD
BASEBAND VERSION G935FXXU1APEQ
BUILD NUMBER MMB29K.G935FXXU1APB6
Click to expand...
Click to collapse
Did the 935F rom worked perfectly? Please upload your about phone screenshot
Dewang rocky said:
Did the 935F rom worked perfectly? Please upload your about phone screenshot
Click to expand...
Click to collapse
Here's the screenshots.....
Plzz help
gurpreet4u15 said:
Tx vry much for help but can you give a link rather than sammobile
Click to expand...
Click to collapse
Sorry I don't have any other link
[email protected] said:
Sorry I don't have any other link
Click to expand...
Click to collapse
It's ok dude atleast you helped
gurpreet4u15 said:
i downloaded and flashed a stock rom G935FXXU1APB6_G935FOLB1APB6_XSP_FULL using Odin.
Click to expand...
Click to collapse
A bit silly question but have you tried installing from Smart Switch? You mentioned Odin so that didn't look promising...
Try recovery from Smart Switch.
gurpreet4u15 said:
Here's the screenshots.....
Plzz help
Click to expand...
Click to collapse
I have 935FD i havr still not tried 935F rom on it,but seems like you have flashed FD in your S7 edge
Dewang rocky said:
I have 935FD i havr still not tried 935F rom on it,but seems like you have flashed FD in your S7 edge
Click to expand...
Click to collapse
Official ROMs for F & FD models are same...
p2kin said:
Official ROMs for F & FD models are same...
Click to expand...
Click to collapse
Oh thanks,am planning to flash afgan F on my indian FD
I did it on G935FD UAE version. I flashed with G935F UK version, alll is perfect!
troxter said:
I did it on G935FD UAE version. I flashed with G935F UK version, alll is perfect!
Click to expand...
Click to collapse
can you guide me on step to flash? did you do a factory reset before/after flashing? thanks
madkhaz said:
can you guide me on step to flash? did you do a factory reset before/after flashing? thanks
Click to expand...
Click to collapse
Download and install USB drivers for Samsung Galaxy S7 edge in your computer.
Make sure to take backup of any important files on your smartphone.
Enable USB debugging option by pressing Menu > Settings > Applications. Navigate and tap on Developer Options to ensure that USB Debugging is enabled.
Ensure that your Galaxy S7 edge carries more than 70% of charge.
Highly Credible Leak Points At Early Samsung Galaxy S7 Launch Date
Unzip Odin on your computer and install it.
Unzip firmware zip file in the same folder as Odin.
Switch your Samsung Galaxy S7 edge off and boot it in Download mode: press and hold Volume Down and Power together and then press the Home key. OR, check how to enter Download Mode.
Open Odin and connect your smartphone with your computer. When connected successfully, one of the ID:COM boxes will turn yellow with the COM port number after a while. (In case you don’t get it, try another USB port. If that doesn’t help either, then re-install USB drivers).
On your Odin, select files:
Click on AP and select file with AP in its name.
Click on CP and select file with MODEM in its name – ignore if you didn’t get any such file.
Click on CSC and select file with CSC in its name – ignore if you didn’t get any such file.
Click on PIT and select the. pit file – ignore if you didn’t get any such file.
Click on BL and select file with BL in its name – ignore if there is no such file.
Make sure to check Auto Reboot and F.Rest Time. Check Re-Partition only if you selected the. pit file.
Click on Start to initiate the update process.
When Android 6.0.1 Marshmallow update installation is successfully completed, you will get a PASS message.
I don't know if factory reset is necessary after flash, but I did it, just in case. I attached Odin which I used.
p2kin said:
A bit silly question but have you tried installing from Smart Switch? You mentioned Odin so that didn't look promising...
Try recovery from Smart Switch.
Click to expand...
Click to collapse
What's the difference ??
gurpreet4u15 said:
What's the difference ??
Click to expand...
Click to collapse
Unless you know what you are doing and about files source/files you are flashing, then not much.. but if you are not sure, then Smart Switch can download official f/w for your specific model & flash it for you.. simplest, no brainer to recover to official f/w.
p2kin said:
Unless you know what you are doing and about files source/files you are flashing, then not much.. but if you are not sure, then Smart Switch can download official f/w for your specific model & flash it for you.. simplest, no brainer to recover to official f/w.
Click to expand...
Click to collapse
Okk Tx dude......
Official Android 7.0
Hi
I have G935FD device, which I recently bought (the second hand one).
I notice that I have issue with GPRS data transfer... it looks like, from time to time when GPRS is active SMS sending is not possible any more (up to next power OFF of device) .
At that time I'm able to see only one GPRS range indicator.
I'm able to receive calls from both SIM cards.
I did not check am I able to call from both of them.
According to my google investigations issue is pressent in Android 6.0, which I have right now.
Case shall be easy, I need to update to Nugat verision and it is all , but...
1) If I'll check firmware update on my mobile I have inforamtion that it is the latest version of firmware G935FXXU1APD1// G935FXXU1APB6. what is not true
2) I started to looking for official Android 7.0 version. to get it, I have to have CSC code. Phone info application have cleared out all CSC code. *#1234# don't work - "error message connection error or wrong MMI code".
Device type is hero2lte
Product name is hero2ltexx
Product code is SM-G935FZSU - this looks like oryginal information .
Bootloader : G935FXXU1APB6
PDA Version: G935FXXU1APD1
Baseband Version" G935FXXU1APB6
CSC Version :
Kernel Version
3.18.14-7538748
[email protected]#1
64-bit
knox warrantz void: 0x0
Does any one know what can be the oryginal CSC code for such device?
Can you tell me where can I find oryginal Android 7.0 which will works fine in Poland ?
Thanks in advance.
Hi
Below information for anyone who have the same issue as I.
I download the newest official ROM for Android 7.0 for Poland (G935FXXS1DQHI).
I used ROM for single sim, not dual sim.
Since that I don't have any issue with SMS or GPRS any more.
MMI codes started to work back.
I still have dual sim .
Simple , now it works better !!
I got a used GT-935T phone very recently in India, which was still running android 6.0. On browsing these forums, I found out that we could flash stock rom on it without rooting, so I did so using Odin. I flashed the stock rom of Android 7.0 for t-mobile 935T, which was what my phone was supposed to be.
On further browsing, I also discovered, that we could flash any stock rom on the phone, irrespective of the region. So I decided to download the latest stock rom for India 935fd. I did so, but whenever I'm trying to flash it using Odin, I'm getting an error - repartition failed.
I've not checkd the repartition option.
can someone help me?
Hi.
I am using 935F single sim THL csc mobile
I want to change it to IND csc.
Is their any possible solution.
I need voWifi its only available in indian csc.
Also i am staying in india.
My present mobile details are as below.
Product Code: SM-G935FZKAINS
PDA: G935FXXS8ETC7
CSC: G930FODD5ESE1
Baseband: G935FXXS8ETC7
Bootloader: G935FXXS8ETC7
Single sim 935F. Android version 8.0.0
After updating to Android 6.0.1, the phone is randomly losing mobile and gps signal. It happens about 30-40 times a day, especially when moving around, like driving . Almost every time I look at my phone, I see "No service, network not found" or "gps lost" messages. After about 10 seconds, the signal comes back and everything is ok again. Very annoying and impossible to use navigation apps, like Waze and Google Maps. I have made a soft reset, a hard reset, wiped all data and cleared the phone cache, checked and cleaned the Sim card. Nothing helps. Before update the phone worked brilliantly. Also noticed, that the signal won't drop when using wifi, the problem occurs only when data connection is on. And I'm not the only one, I have 2 friends with the same phone and the same problem. Looks like a software issue. Can somebody help?
PS. I'm from Estonia, and the software version is G901FXXU1CPE1/G901FBAL1CPE1
Thank you in advance...
Hi mate,
I Have the same device although mine uses a custom ROM but the problem I experienced was exactly like yours
Samsung released a new issue of the 6.0.1 for our phone, PDA G901FXXU1CPF6 CSC G901FPHN1CPF2 you can login to the sammobile site and download it
As I said above I have a custom ROM so I only flashed the modem firmware from that release and worked fine after that!
Hope that will help you!
Thanks for your response! But I'm using a totally stock phone and I see, that this firmware is for Netherlands. Does it work on my phone or I have to wait until the Baltic version is released?
MirandoKersman said:
Thanks for your response! But I'm using a totally stock phone and I see, that this firmware is for Netherlands. Does it work on my phone or I have to wait until the Baltic version is released?
Click to expand...
Click to collapse
Hello,
I don't see any reason why it wouldn't work but just in case make a note of your Access point name settings in the mobile networks tab just to make sure that everything is the same after you flash the new release .
If you follow the steps as described in the sammobile site you won't have any problems.
What I have noticed however is that after I flashed the new modem firmware the mobile hotspot does not work anymore but this has to do with my custom ROM.
It worth trying though the performance of the phone after that is exceptional and the signal strength is higher than before and most importantly, doesn't crash anymore..
Let me know if you need help and keep me posted about your results!
i had that ROM for a while, didnt help in my case, still same issue. I'm currently on XXU1CPG3 with which the issue still persists, gonna try flashing the new TPD CSC ROM (currently the newest) ROM Version CPH9. My baseband is still CPE1, which do you guys have?
Randi said:
i had that ROM for a while, didnt help in my case, still same issue. I'm currently on XXU1CPG3 with which the issue still persists, gonna try flashing the new TPD CSC ROM (currently the newest) ROM Version CPH9. My baseband is still CPE1, which do you guys have?
Click to expand...
Click to collapse
Baseband:
G901FXXU1CPE1, I have a totally stock phone with the latest official firmware.
Latest official firmware from where? ("latest" is region dependent)
Ok, the cph firmware updated the baseband to cph, on my side it's only been a while 14 hrs since flashing but it seems the signal problem is finally fixed
Randi said:
i had that ROM for a while, didnt help in my case, still same issue. I'm currently on XXU1CPG3 with which the issue still persists, gonna try flashing the new TPD CSC ROM (currently the newest) ROM Version CPH9. My baseband is still CPE1, which do you guys have?
Click to expand...
Click to collapse
From what I understand it doesn't matter which ROM you are using the baseband is the one that causing this problem..
As I said I have a custom ROM and when I had the CPE1 baseband then I had all these problems.
If you flashed the ROM and your baseband is still CPE1 then something did not go per plan I think..
After flashing ONLY the modem firmware from the CPF6 release to my SMG901F is reported that the baseband version is CPG2 however..
This version works for sure..
I might try the CPH9 release now to see if the issues i have with the mobile hotspot will be solved
George A. said:
From what I understand it doesn't matter which ROM you are using the baseband is the one that causing this problem..
As I said I have a custom ROM and when I had the CPE1 baseband then I had all these problems.
If you flashed the ROM and your baseband is still CPE1 then something did not go per plan I think..
After flashing ONLY the modem firmware from the CPF6 release to my SMG901F is reported that the baseband version is CPG2 however..
This version works for sure..
I might try the CPH9 release now to see if the issues i have with the mobile hotspot will be solved
Click to expand...
Click to collapse
I'll try to install that CPH9 release too. Let's see what happens, because I have tried everything else.
To me it seems, that this CPE1 version is having problems with switching between network modes. I checked, that in Settings- Mobile networks- Network mode is set to LTE/3G/2G (automatic connect), but I haven't seen H+, H or Edge symbols on top of the screen. Only 4G/4G+ or no reception at all. Like it's locked in 4G network or something. And sometimes when there is no 4G network coverage, there is also no signal. But that is just my logic...
Ok, I flashed the latest CPH9 firmware and my baseband changed to CPH3. CSC Country turned to Netherlands instead of Baltic. And it seems that the issue is fixed!
I made a little test, I went to the cellar to get bad 4G reception and instead of showing No Service, 4G turned to H without losing the cell signal. Let's wait and see...
Thank you guys a lot for your help! :good:
Hi
1) I have the latest PHN version for SM-G901f stock& rooted. I see the TPD version, will it have dutch language if i flash it ( without wipe anything) in ODIN?
2) What does TPD stand for anyway?
I want to do this because i see TPD has latest security_patch sept 1
With rooted Phone there is no way (as far as i know (3) ) to get security updates without getting the message it as screenshot given under here....
I can confirm that the issue has been fixed for me as well! ****ing finally! :cyclops:
Btw it will not switch to Dutch
MirandoKersman said:
After updating to Android 6.0.1, the phone is randomly losing mobile and gps signal. It happens about 30-40 times a day, especially when moving around, like driving . Almost every time I look at my phone, I see "No service, network not found" or "gps lost" messages. After about 10 seconds, the signal comes back and everything is ok again. I have made a soft reset, a hard reset, wiped all data and cleared the phone cache, checked and cleaned the Sim card....
PS. I'm from Estonia, and the software version is G901FXXU1CPE1/G901FBAL1CPE1
Thank you in advance...
Click to expand...
Click to collapse
I'm from Indonesia and buy used g901f from singapure,
I have same problem with marsmallow latest update too
My software version is G901FXXU1CPH3/G901FOLB1CPH1/G901FXXU1CPH1
How to fix it? Step by step..
Thank you before..
*) sorry for my bad english
---------- Post added at 01:43 AM ---------- Previous post was at 01:36 AM ----------
Randi said:
I can confirm that the issue has been fixed for me as well! ****ing finally! :cyclops:
Btw it will not switch to Dutch
Click to expand...
Click to collapse
Pliss help me with step to fix it
Hello! It seems all the firmwares ending with CPE1/CPH1 are problematic. You can try some other firmware from http://www.sammobile.com/firmwares/database/SM-G901F/
Select the firmware what seems best for you, don't select the operator-based ones, like vodafone etc. If you click on the firmware and scroll the page down, you will see step-by-step instructions how to install it. Good luck!
Ok but i can't found latest country band FW have same with indonesia network (except FW country singapure now i using it)
So i'll try to download FW update 2016-09-03
Country Unknown
Build date Tue, 13 Sep 2016
Security Patch Level 2016-09-01
Product code ORL
PDA G901FXXS1CPI4
CSC G901FORL1CPF1
I downgraded to marshmallow from nougat and vibrate broke. Motor beeps (yes, motor, not speaker) when it tries to vibrate. Can this be really software issue? I Flashed stock firmware again with Odin and smart switch.
It seems hardware problem, but strange that it appeared just when I downgraded...
Can't be a hardware problem as I have the exact same problem. I too was running the beta program Nougat and decided to leave. Flashed a BTU rom and now I too have lost vibrate. Just a faint beep coming from the earpiece when I go into vibrate mode. Anyone any ideas on what to do ?
Have you tried nougat again?
SUPERHAMSTERI said:
Have you tried nougat again?
Click to expand...
Click to collapse
I installed the Nougat rom today via Odin and vibrating is working fine... I really need to downgrade again with vibrating working as I'm looking to sell the phone.. lol
SUPERHAMSTERI said:
Have you tried nougat again?
Click to expand...
Click to collapse
Like I said in previous post I had installed the Nougat rom via Odin.. I then plugged the phone into my PC and started the Smart Switch app.. It told me there was a newer version of the OS available (which is actually the current Marshmallow version), and I let it install it, and vibrating still works.. So maybe you could try that.. Seemed to work for me anyway.
timinireland said:
Like I said in previous post I had installed the Nougat rom via Odin.. I then plugged the phone into my PC and started the Smart Switch app.. It told me there was a newer version of the OS available (which is actually the current Marshmallow version), and I let it install it, and vibrating still works.. So maybe you could try that.. Seemed to work for me anyway.
Click to expand...
Click to collapse
Thanks! Worked!
If you downgrade from 7.0 to 6.0 you need to downgrade your BL and CP too not just the rom. Hope it helps.?
Fixed
SUPERHAMSTERI said:
I downgraded to marshmallow from nougat and vibrate broke. Motor beeps (yes, motor, not speaker) when it tries to vibrate. Can this be really software issue? I Flashed stock firmware again with Odin and smart switch.
It seems hardware problem, but strange that it appeared just when I downgraded...
Click to expand...
Click to collapse
This fixed it for me...
Temporarily upgrade to Android 7 to fix the vibration issue then use odin to flash final version of android 6.0.1. You must flash all 4 files contained in the extracted (unzipped) firmware package but ignore the home_CSC file. IMPORTANT...tick the option in odin "phone bootloader update". This process will wipe all data on the phone but will give you a fully functioning galaxy s7 with Android 6.0.1 marshmallow!
Djwhitegold said:
This fixed it for me...
Temporarily upgrade to Android 7 to fix the vibration issue then use odin to flash final version of android 6.0.1. You must flash all 4 files contained in the extracted (unzipped) firmware package but ignore the home_CSC file. IMPORTANT...tick the option in odin "phone bootloader update". This process will wipe all data on the phone but will give you a fully functioning galaxy s7 with Android 6.0.1 marshmallow!
Click to expand...
Click to collapse
Thanks for sharing.
It`s working. But a single issue. *#06# code is not working .
any idea ?
Djwhitegold said:
This fixed it for me...
Temporarily upgrade to Android 7 to fix the vibration issue then use odin to flash final version of android 6.0.1. You must flash all 4 files contained in the extracted (unzipped) firmware package but ignore the home_CSC file. IMPORTANT...tick the option in odin "phone bootloader update". This process will wipe all data on the phone but will give you a fully functioning galaxy s7 with Android 6.0.1 marshmallow!
Click to expand...
Click to collapse
For me, upgrading back to Nougat didn't fix it. Did you upgrade to Nougat using Odin and the "phone bootloader update" or did you just use the official install method?
dowgrade to Marshmallow today , everythig is working fine except the camera "camera failed" error .. tried all solutions given on internet .. any fix ?
Same Camera not working. PLease help
extracted firmware not what we expected
chinhe said:
If you downgrade from 7.0 to 6.0 you need to downgrade your BL and CP too not just the rom. Hope it helps.
Click to expand...
Click to collapse
Hi, I tried to downgrade from android 7 to 6, but after i extract the firmware, it has 8 files, which most of them look like a cd pictures. Not the file that we expected like BL, CP, etc. None of them like those 4 files that they should be. So I can not continue to use odin, because the extractted files is totally different. Any idea what happen?.
Thanks
No vibration s7 edge after downgrade
Hello i downgraded s7 edge from nougat helios custom rom to marashmallow decent ultralite 5.0 custom . Now my vibrator is not working. I tried flash bootloader via odin it says fail . Please help
i found solution for no vibrator after downgrade nougat to marshmallow
i found solution for no vibrator after downgrade nougat to marshmallow
i found solution for no vibrator after downgrade nougat to marshmallow
S7 edge is not vibrating after downgrade nougat to marshmallow, it is because you are using nougat bootloader in Marshmallow, you just have to flash with odin the correct MARSHMALLOW bootloader and CP and the vibrator will work just fine.
https://androidfilehost.com/?w=files&flid=54002
6 december 2018, i extremely recomend use Decent ultralite 5.0 MARSHMALLOW ROM in samsung S7, it is very fast and stable, S7 is designed for marshmallow.
https://forum.xda-developers.com/s7-edge/development/08-08-decent-debloated-dd1-addons-mods-t3435516
My vibrate problem is because I updated to oreo. Any solutions for this?