Database Users

i can't go to fastboot, recovery. download mode is wrong too

hi,
listen, i had this problem that the device stuck on fastboot mode and boot loop.
than i did "fix 5" from here:
http://forum.xda-developers.com/showthread.php?p=51374260#post51374260
and now i don't have fastboot mode to do this (that i should do before the fix 5 that **** my ass):
http://forum.xda-developers.com/showthread.php?t=2681089
now. i have download mode. but it's not working!!! i tried to flash stock rom and it didn't work!
my download mode is wrong too!
this is how it looks like:
http://www.lg-phones.org/wp-content/uploads/2014/03/image2.png
instead of this:
http://i.imgur.com/HR3cXz4.png
deit: i can enter factory reset
help please!!!!

No fastboot, no download mode only recovery

Hi need help, looked through various guides without success, in my situtation i cannot enter fastboot mode or download mode, i can however enter the phone normally
ultimately I want to factory reset this phone by flashing however i'm not sure how to get into download mode, i have been told that you can reflash the partitions with fastboot however can't get into fastboot mode,
the phone is rooted, is there a solotion to this???

Lg boot loop no recovery

Hi I have a sprint lg v20. Shows lg boot screen and loops. I try to get into recovery mode to factory reset but says recovery mode please wait then continues looping the lg logo. I have not found anything saying they had a similar problem. As far as I know there is no fastboot mode I can use. Any ideas on how I could fix it? Thanks

Did it just start out of the blue, or did you do something?
-- Brian

Can you get in to download mode? (vol+ then plug in to PC) If so, you may be able to use LGUP to flash a kdz.
Good luck! :fingers-crossed:

Help , Lenovo splash screen and the fastboot mode is written on top.

Hello everyone, there is Lenovo K6 Power, which when turned on hangs on the Lenovo splash screen and the fastboot mode is written on top.
1. you can turn it off and hold both volumes to connect to the PC and it will be visible as Qualcomm / Lenovo HS-USB QDLoader 9008,
1.2 but with firmware via qfil - Download Fail: Switch To EDL FailFailed to Switch to Emergency Download mode. (although the body is essentially already in mode)
2. The fastboot devices command is defined in the fastboot. through the fastboot oem command, reboot-edl- switches to the mode, but when trying to flash it repeats p1.2
3. enters the native recovery, tried to make wipes - it does everything, and after rebooting the mode enters the fastboot again.
*
On a third-party resource, they prompted that we should try to update update.zip with 231 firmware from the native recovery. Does anyone have this file?
sorry for my english, I translated google translator)

imprestness said:
Hello everyone, there is Lenovo K6 Power, which when turned on hangs on the Lenovo splash screen and the fastboot mode is written on top.
1. you can turn it off and hold both volumes to connect to the PC and it will be visible as Qualcomm / Lenovo HS-USB QDLoader 9008,
1.2 but with firmware via qfil - Download Fail: Switch To EDL FailFailed to Switch to Emergency Download mode. (although the body is essentially already in mode)
2. The fastboot devices command is defined in the fastboot. through the fastboot oem command, reboot-edl- switches to the mode, but when trying to flash it repeats p1.2
3. enters the native recovery, tried to make wipes - it does everything, and after rebooting the mode enters the fastboot again.
*
On a third-party resource, they prompted that we should try to update update.zip with 231 firmware from the native recovery. Does anyone have this file?
sorry for my english, I translated google translator)
Click to expand...
Click to collapse
What is the exact firmware version that you are trying to download into the eMMC?
I'd suggest you to find a full package for K6 Power (I have the package for K6 Note) and try to download it with QFIL. You can find these on a lot of YouTube videos.
And for entering into the EDL mode, better install a custom recovery (you can find the procedure on XDA) and enter EDL mode from TWRP recovery. This is a better option as you will barely know if you device is in EDL mode as the screen is always off.
Don't worry you will get the stock recovery back when you download the stock firmware into the eMMC.
Thanks,
tfr.

CrashDump Mode OP8 Pro

I need some help here. My device is the IN2020 OP8 Pro. My device is currently on Crashdump Mode after attempting to flash TWRP
fastboot flash recovery_a .\twrp-3.4.0-2-instantnoodle-unified-mauronofrio.img
fastboot flash recovery_b .\twrp-3.4.0-2-instantnoodle-unified-mauronofrio.img
Device boot properly and worked but on restarting ended up on Crushdump mode. I can't seem to be able to get into EDL mode by Vol + Vol - combo so not sure how get of this. When i power off from Fastboot mode the device just restarts to Crashdump also power off combo from crashdump ends up in another restart. Appreciate any pointers or assistance.