I'm on a Verizon s7 g930V running Samsung's stock firmware g930U and I've read that the phones bought through Samsung (so no carrier to go through) are getting Nougat OTA already.
I'm rooted, so it obviously gets mad if I try to check for an OTA, but should I unroot and check for a nougat OTA?
Do we know of anyone trying this successfully?
Does a Nougat Odin install package exist somewhere with "g930u" in the beginning of the filename?
Let me know if I should bother guinnea pigging on this one.
No need, I just checked and there's no update. Nothing online about it either. Seems only the international models are getting 7.0 at this time.
930/935 U is on quarterly updates. There will likely be no Nougat till April at the earliest.
so is there any possible way of running nougat on sm-g30u?
am i able to flash sm-g30f firmware on this to get nougat or is this not possible as they are different models?
[email protected] said:
so is there any possible way of running nougat on sm-g30u?
am i able to flash sm-g30f firmware on this to get nougat or is this not possible as they are different models?
Click to expand...
Click to collapse
The F model is the international version and it is not compatible with the US unlocked S7. You can however flash any US carrier version firmware on the the SM-G930U.
thanks, are they any known issues in smg930u like the ones i raised earlier?
seems very buggy in australia. Microphone is also recording muffled and louspeaker calls echo on my listeners end and no noise cancellation
getting frustrated with the device, network is bad, any possible way of flashing the baseband from a sm-g30F to a SM-G930U?
I need the network more reliable. Now i regret not checking the model number before buying the phone
nrage23 said:
The F model is the international version and it is not compatible with the US unlocked S7. You can however flash any US carrier version firmware on the the SM-G930U.
Click to expand...
Click to collapse
EDIT: Neverfmind, figured it out.
Where can I find the latest Nougat firmware for unlocked AT&T without the bloatware?
I ordered a manufacturer refurbished S7 Edge the other day...it's an AT&T unlocked phone so no doubt has the factory Marshmallow o/s plus bloatware. It hasn't arrived yet but I wanted to be ready to reflash it with Nougat. I looked about but did not find a definitive Nougat package for this handset that removes all the AT&T bloatware. Can you please point me in the right direction? Thanks!
I'm using the 'U' version for my S7 Edge AT&T phone. No bloat and wi-fi calling, VOLTE, etc.
Hello everyone,
I have an unbranded, factory unlocked U1 Samsung Galaxy S8 that I am wanting to switch to Verizon Prepaid. Currently, it's running on Tracfone with the T-Mobile network. Wi-Fi Calling is a must-have for me, but I've heard that it will not work on Verizon with the factory unlocked Galaxy S8 model. It currently works on Tracfone/T-Mobile, though.
Rather than going the extreme route of getting another phone, I was hoping that it would be possible to just flash the Verizon firmware on it in order to gain Wi-Fi Calling and other carrier features from Verizon.
Below are some questions I have about this.
1. Is this likely to work, or would I just be better off to get a branded phone?
2. Is the process as simple as it sounds on the SamMobile site? Or does the process involve something more like this?
3. Will I be able to receive OTA updates after flashing carrier firmware?
4. Are there any particular issues or pitfalls that I should be aware of before attempting this? (besides possible data loss, of course)
5. Will I be able to flash it back 100% to the stock firmware later on if I want to sell it?
6. Is there any other way to get Verizon Wi-Fi Calling while staying on the unlocked firmware?
Any input would be appreciated.
Thanks!
Hello! I've been out of the Android scene for a few years so I have a question that I can't seem to find the answer to by searches.
Can I flash the unlocked U1 firmware to a Verizon S10+ and use it on AT&T? I know I'll lose VoLTE and WiFi calling, but I don't really care about those. Mainly, I'm just trying to see if I can use a Verizon S10+ on AT&T. Ideally, I'd like to flash the AT&T firmware on the device but from what I've gathered, that firmware isn't available yet.
I had a Galaxy S8+ when it came out and I used Odin to flash between U1 and AT&T firmware so the process isn't entirely new to me.
A bit of background:
I'm looking to jump off of the dead iPhone train and hop back into Android with the S10+. I'm currently trying to sell/trade my iPhone XS Max in order to make the switch.
I have someone who is willing to trade me their Black S10+ for my iPhone as an even trade but their S10+ is from Verizon. It's unlocked but it's still running the stock Verizon firmware.
I just want to know what I have to do with this trade in order for it to work for me. I want to make sure I get a phone I can use. Any advice or input would be greatly appreciated!
Thanks for any help!
I'm not entirely sure if this will work on the S10+, I haven't tried it yet, but when I had the S8+(it was from Verizon as well), I'd take it internationally with a different sim card, it would just prompt me to reboot the phone and it would automatically apply the appropriate CSC settings. I was on stock VZW firmware as well and VoLTE worked (wifi calling didnt).
You should be fine either way though, people have successfully flashed the U1 firmware on their VZW devices for the S10+, so you shouldn't have any issues getting your AT&T sim card to work on it.
Edit: link to get the U1 firmware
https://forum.xda-developers.com/s10-plus/how-to/sm-g975u-firmware-downloads-tmo-spr-att-t3908657
aroy97 said:
I'm not entirely sure if this will work on the S10+, I haven't tried it yet, but when I had the S8+(it was from Verizon as well), I'd take it internationally with a different sim card, it would just prompt me to reboot the phone and it would automatically apply the appropriate CSC settings. I was on stock VZW firmware as well and VoLTE worked (wifi calling didnt).
You should be fine either way though, people have successfully flashed the U1 firmware on their VZW devices for the S10+, so you shouldn't have any issues getting your AT&T sim card to work on it.
Edit: link to get the U1 firmware
https://forum.xda-developers.com/s10-plus/how-to/sm-g975u-firmware-downloads-tmo-spr-att-t3908657
Click to expand...
Click to collapse
I wish Samsung included the BYOD update in the S10+, that would make it so much easier. I think I'm just gonna make the trade.
I've read through that thread and that's what I think I'm going to do. I'd much rather flash the AT&T version, but seeing as how it's not available, the U1 will do fine until it's released. I'll just need to switch to a different voicemail service in the meantime. lol
I got a Verizon S10+ and it is running build PPR1.180610.011.G975USQS2ASGB, I have confirmed that putting an AT&T SIM gives me network ability to call and what not. I want to flash the stock U1 branded firmware, is it okay if I flash G975U1UEU1ASD8 with Odin?
SimplyNando said:
Hello! I've been out of the Android scene for a few years so I have a question that I can't seem to find the answer to by searches.
Can I flash the unlocked U1 firmware to a Verizon S10+ and use it on AT&T? I know I'll lose VoLTE and WiFi calling, but I don't really care about those. Mainly, I'm just trying to see if I can use a Verizon S10+ on AT&T. Ideally, I'd like to flash the AT&T firmware on the device but from what I've gathered, that firmware isn't available yet.
I had a Galaxy S8+ when it came out and I used Odin to flash between U1 and AT&T firmware so the process isn't entirely new to me.
A bit of background:
I'm looking to jump off of the dead iPhone train and hop back into Android with the S10+. I'm currently trying to sell/trade my iPhone XS Max in order to make the switch.
I have someone who is willing to trade me their Black S10+ for my iPhone as an even trade but their S10+ is from Verizon. It's unlocked but it's still running the stock Verizon firmware.
I just want to know what I have to do with this trade in order for it to work for me. I want to make sure I get a phone I can use. Any advice or input would be greatly appreciated!
Thanks for any help!
Click to expand...
Click to collapse
HEY I know have the same problem... Does it work.., I have installed the firmware and all so should I go for it.., waiting for your reply
I have Verizon unlocked phone and I'm able to use internationally where there is no Verizon, but I'm not getting updates so I have downloaded latest firmware should I flash it, also now I don't need any Verizon sim after flashing right ?
Yes you can flash U1 firmware to a U device and vica versa. The U means Universal, so you can flash AT&T, Verizon, T-mobile, or unlocked firmware to it. You gotta use the patched version of Odin though.
SimplyNando said:
Hello! I've been out of the Android scene for a few years so I have a question that I can't seem to find the answer to by searches.
Can I flash the unlocked U1 firmware to a Verizon S10+ and use it on AT&T? I know I'll lose VoLTE and WiFi calling, but I don't really care about those. Mainly, I'm just trying to see if I can use a Verizon S10+ on AT&T. Ideally, I'd like to flash the AT&T firmware on the device but from what I've gathered, that firmware isn't available yet.
I had a Galaxy S8+ when it came out and I used Odin to flash between U1 and AT&T firmware so the process isn't entirely new to me.
A bit of background:
I'm looking to jump off of the dead iPhone train and hop back into Android with the S10+. I'm currently trying to sell/trade my iPhone XS Max in order to make the switch.
I have someone who is willing to trade me their Black S10+ for my iPhone as an even trade but their S10+ is from Verizon. It's unlocked but it's still running the stock Verizon firmware.
I just want to know what I have to do with this trade in order for it to work for me. I want to make sure I get a phone I can use. Any advice or input would be greatly appreciated!
Thanks for any help!
Click to expand...
Click to collapse
As Just changing csc without installing the system is more than enough. Even the company logo changes. Just look for the samkey program and you will see
I have an S8 from Rogers (Canada) [G950WVLS7CTC1], purchased from a Flea Market
I live in the US and I am on Verizon, and I saw some guides to flash a firmware from another carrier, like Verizon.
I don't want to dive into flashing a firmware if it's going to brick my phone.
Can anyone point me in the right direction? Can this be done?
Thanks!