I just flashed g930v to g930u. I thought I was just unlocking more bands so I can bring my phone to Europe for an upcoming location, but it seems like I lost mobile connection. I have the LTE symbol and i do get data, but my mobile connection is not working. No one can call me. I'm currently on boom wireless mvno (verizon service). Does g930u not support verizon?
You might need the apn settings for your carrier
Which firmware are you on?
CVertigo1 said:
Which firmware are you on?
Click to expand...
Click to collapse
baseband EU4APL2 , dec 1 2016 patch.
elzeus said:
You might need the apn settings for your carrier
Click to expand...
Click to collapse
I added my carrier's APN settings in "access point names". I am unable to add anything custom in "network operators" it all is selected automatically.
I had the same issue. It seems to be the boom mobile sim card issue. Somehow the sim card is auto configured to let 930U think it is a gsm network, so the phone only has LTE/GSM mode. If you check your network mode, you wouldn't see global or CDMA mode, which verizon uses. There is no issue for verizon on 930U firmware. I had to switch back to 930V firmware.
tesla9999 said:
I had the same issue. It seems to be the boom mobile sim card issue. Somehow the sim card is auto configured to let 930U think it is a gsm network, so the phone only has LTE/GSM mode. If you check your network mode, you wouldn't see global or CDMA mode, which verizon uses. There is no issue for verizon on 930U firmware. I had to switch back to 930V firmware.
Click to expand...
Click to collapse
Same issue, I am needing g930u so I can have some bands unlocked for a trip to china but I can't get Boom Mobile to get any data connection. I am having to go back to g930v
Anyone have any solutions?
Related
I am really new to the world of ROOTING & FLASHING and have already bricked one device. I have followed a lot of information provided by the gurus on here but am at a standstill with my new device as I cannot afford to brick a second one due to my lack of knowledge when it comes to this stuff.
I do not wish to root my device at this time but did read the post talking about "regional" lock. It seems this is only relevant if people unlock their device through the rooting method. Since my device is from WIND Mobile (unactivated) and I purchased an unlock code from cellunlocker.net, I assume I can input my Telus SIM and I would not have to worry about a regional lock? As I understand, the purchased unlock code would supersede the regional lock correct?
As for Telus... When I unlock my WIND device, I assume it will be like my original where Telus voice worked but data was limited with 3G. This was due to the radio band for LTE being crippled in the device. I was told without rooting, I could still use the device with LTE but would have to FLASH the LTE modem through the ODIN software. When I look at the link which provides "flashable" modems, there is nothing there for my specific model.
AllGamer posted a modem (.bin) file for the Puerto Rico modem which supports LTE but confirmed with me this is not a file which can be flashed through ODIN and has to be packaged (or something to this affect). This is all too new to me and so if anyone could provide the steps to FLASH a compatible LTE modem onto my device without rooting so I have LTE support enabled, this would be great!
Thank you!
Issue is resolved. Currently, you cannot just flash the modem and must root and install a custom ROM supporting LTE. Once this device has been out long enough, the possibilities of modification will be greater but for now, my device from WIND works with Telus and has LTE data.
First, Telus, Rogers, Bell, Wind....all these carrier carry the same model of Note3 and running the same ROM
all you have to do is pull out your Wind sim card and do a factory reset. Then put in your Telus Sim card.
Phone will find Telus CSC setting and set it up as Telus phone.
As long your phone is sim unlock with Wind Mobile, any Canadian carrier should be working with your phone
About LTE, maybe there just don't have any LTE signal in the area, or your LTE setting has been turn off.
All you need to do is go into setting check under network and see if the phone is running GSM/CDMA/LTE or GSM/CDMA only, just switch between 2 and you will get your LTE with Telus LTE sim.
You don't have to worry about region code once your purchase unlocked online. region lock only apply when the phone never activate with local sim card and trying to activate with sim card from other countries. Just put in your Telus SIM and setting up the phone. Wind has this phone becuz it support AWS network, it doesn't mean the phone come with different modem!
Since you are not looking to root your phone or anything....there really no need for any flashing!
yuenluv said:
First, Telus, Rogers, Bell, Wind....all these carrier carry the same model of Note3 and running the same ROM
all you have to do is pull out your Wind sim card and do a factory reset. Then put in your Telus Sim card.
Phone will find Telus CSC setting and set it up as Telus phone.
As long your phone is sim unlock with Wind Mobile, any Canadian carrier should be working with your phone
About LTE, maybe there just don't have any LTE signal in the area, or your LTE setting has been turn off.
All you need to do is go into setting check under network and see if the phone is running GSM/CDMA/LTE or GSM/CDMA only, just switch between 2 and you will get your LTE with Telus LTE sim.
Since you are not looking to root your phone or anything....there really no need for any flashing!
Click to expand...
Click to collapse
You are only partially right with your response. Look at my other threads with how to get things functional. First, the phone is the same model for each Canadian carrier but as per the agreements between the carriers and Samsung, specific bands have been crippled. I unlocked my Note 3 so yes, the Telus SIM will be recognized upon a factory reset and will pick up the correct APN settings but since the LTE modem has been crippled, the device is great for voice but has sloooooow 3G data.
In order to get the device working with LTE, you must flash an LTE capable modem onto the device. Since this device is new on the market, no modem (.bin) file has been made flashable. At this point, the only option is to root your phone. Even when rooting and installing the Telus firmware (ROM), this will still not enable LTE as there's a safeguard in the device. Once the phone has been rooted, you must go into the regional settings for the device and select the carrier setting for the ROM you just installed. This will format the device and reboot with your carrier setting thus enabling LTE/WCDMA/GSM (auto connect) within your network settings menu. Only at this point, will you have true LTE capability otherwise, you're using a phone with hindered capabilities. Using Telus on 3G is like driving a Corvette with a Cavalier motor.
cellrama said:
You are only partially right with your response. Look at my other threads with how to get things functional. First, the phone is the same model for each Canadian carrier but as per the agreements between the carriers and Samsung, specific bands have been crippled. I unlocked my Note 3 so yes, the Telus SIM will be recognized upon a factory reset and will pick up the correct APN settings but since the LTE modem has been crippled, the device is great for voice but has sloooooow 3G data.
In order to get the device working with LTE, you must flash an LTE capable modem onto the device. Since this device is new on the market, no modem (.bin) file has been made flashable. At this point, the only option is to root your phone. Even when rooting and installing the Telus firmware (ROM), this will still not enable LTE as there's a safeguard in the device. Once the phone has been rooted, you must go into the regional settings for the device and select the carrier setting for the ROM you just installed. This will format the device and reboot with your carrier setting thus enabling LTE/WCDMA/GSM (auto connect) within your network settings menu. Only at this point, will you have true LTE capability otherwise, you're using a phone with hindered capabilities. Using Telus on 3G is like driving a Corvette with a Cavalier motor.
Click to expand...
Click to collapse
In the case, just download Telus ROM from samsungupdate and flash it with Odin3
yuenluv said:
In the case, just download Telus ROM from samsungupdate and flash it with Odin3
Click to expand...
Click to collapse
LOL :laugh: I have already rooted, flashed the Telus ROM and enabled LTE on my device. It is a little more complicated than what you've suggested but yes, you are partially right. Even with the Telus ROM, you need to ensure you've enabled the radio/modem for LTE capability. Thanks for your suggestions!
I have my GS7 unlocked. Working on AT&T Network, LTE fine. But at some point I will lose signal and then it won't connect to network until I restart the phone.
Then I noticed...I don't even have a network selection menu.
Is there a code to get to the menu manually and manually set it only connect to the gsm network modes.
Are you using the Stock G930P rom or the G930U one? Cause the G930U for what i've seen preforms the best once unlocked
Stock GH1 g930p....I didnt feel the need to flash the U version. But maybe I will.
I found an app that let me set to gsm/lte
matrx10503 said:
Stock GH1 g930p....I didnt feel the need to flash the U version. But maybe I will.
I found an app that let me set to gsm/lte
Click to expand...
Click to collapse
What app?
FYI: Sprint PF1 firmware has network selection enabled, I believe it was disabled thereafter, just like hotspot and apn editing.
Anyway, the app was "Network Mode"
EDIT: SOLVED... In Dual SIM settings, the Network mode was set to GSM only. I switched it to LTE/WCDMA/GSM mode and now I have LTE again. I guess GSM only was set by default?
My phone no longer accesses the T-Mobile LTE network, rather it only stays on EDGE after I flashed DrakenFX's B29 build bootstack and system files from the thread "[ROM/GUIDE] Full Updates / Back to Stock Files via TWRP (A2017U, A2017G, A2017)".
Strangely, the phone shows two T-Mobile default APNs, and I don't know why they are on there! I'm using an MVNO (Ultra Mobile, on the T-Mobile network). These T-mobile APNs can't be deleted as there is no option to delete APNs in the menus. I've tried all four APN settings offered by the Ultra Mobile tech support line, and they all give EDGE data. My LTE data was working fine before I unlocked the bootloader, rooted, and flashed B29. Everything functions perfectly besides the mobile data.
Any ideas? (XDA rules say I can't post in the development threads).
Hi guys,
Was able to get a LS997 in Canada. Carrier used is Fido.
Bootloader was unlocked using Dirty Santa.
When using stock based (sprint) rom, I always get an invalid sim error. This causes the phone/cell data not to work.
When using a lineage based rom, sim works perfectly and I get LTE data.
Is this behaviour normal?
Is there a way to make a non-sprint sim work on a stock rom?
Thanks
Update: Tried the WETA US996 rom on the device. Sim is recognized (since its the unlocked version), but LTE only works if I go in Network Mode, disable Global , enable LTE/GSM/UMTS, then set submode to "GSM/GPRS/EDGE only" or "UMTS/HSPA/HSPA+ Only" , then set it to "LTE/LEgacy 3GPP Multi".
This is a PITA since every time the connection is lost, these steps have to be repeated to get LTE data.
Any suggestion would be greatly appreciated.
I am running stock based rom to get the camera app and use the top screen.
Thanks
You have tried root, install twrp and flash file modem
PjLyTam said:
You have tried root, install twrp and flash file modem
Click to expand...
Click to collapse
TWRP is already installed and the roms used are rooted. I looked but am unable to find radios/modem for the ls997.
If running AOSP based roms I have no problems getting LTE to work.
Aren't the radio/modem separate from the roms themselves, or are they included with could be the reason it glitches like that?
the phone itself is not carrier unlocked thats why you get invalid sim. when you use lineage roms they dont check if phone is carrier unlocked
me2151 said:
the phone itself is not carrier unlocked thats why you get invalid sim. when you use lineage roms they dont check if phone is carrier unlocked
Click to expand...
Click to collapse
Thanks, that's what I thought!
Looking at the LTE specs for both phones:
LS997 : LTE band 2(1900), 3(1800), 4(1700/2100), 5(850), 7(2600), 12(700), 25(1900), 26(850), 41(2500)
US996: LTE band 2(1900), 3(1800), 4(1700/2100), 5(850), 7(2600), 12(700), 13(700), 17(700), 20(800), 25(1900)
Source: http://www.gsmarena.com/lg_v20-8238.php
Fido requires 700 MHz on Band 17, 1700/2100 MHz on Band 4, 2600 MHz on Band 7
Source: http://www.fido.ca/consumer/content/configure-unlocked-device-guide
Bands 4 and 7 are a perfect match, and band 17(700) is a subset of band 12(700), so the LS997 should be 100% compatible.
Source: https://en.wikipedia.org/wiki/LTE_frequency_bands
Would you happen to know which modifications I would have to bring to make it so that I can get LTE working out of the box like Lineage for 997 on a 996 unlocked based rom?
Thanks
Phillis said:
Thanks, that's what I thought!
Would you happen to know which modifications I would have to bring to make it so that I can get LTE working out of the box like Lineage for 997 on a 996 unlocked based rom?
Click to expand...
Click to collapse
You would have to use a us996 unlocked ROM with proper apns for your carrier in the apns list. The file is /system/etc/apns-conf.XML I believe
me2151 said:
You would have to use a us996 unlocked ROM with proper apns for your carrier in the apns list. The file is /system/etc/apns-conf.XML I believe
Click to expand...
Click to collapse
Edited my post above.
APN is properly set automatically on phone. As stated in the first (ERROR: second!) post, I can get LTE working, but need to set GSM/UMTS first then switch to LTE manually, and once the connection is dropped, this procedure has to be done again.
looked at the APN settings, they are the same as described by carrier.....anyone has an idea?
Phillis said:
looked at the APN settings, they are the same as described by carrier.....anyone has an idea?
Click to expand...
Click to collapse
like me2151 said, flash the us996 based rom. Its the unlocked version that will allow sim cards from other carriers to be used.
The ls997 roms are cdma based roms that dont use the sim card for anything but lte and is a locked slot unless device is uicc unlocked by the carrier.
There isnt a method currently to uicc unlock this device without the carrier sending the code to the device.
Team DevDigitel said:
like me2151 said, flash the us996 based rom. Its the unlocked version that will allow sim cards from other carriers to be used.
The ls997 roms are cdma based roms that dont use the sim card for anything but lte and is a locked slot unless device is uicc unlocked by the carrier.
There isnt a method currently to uicc unlock this device without the carrier sending the code to the device.
Click to expand...
Click to collapse
Hello,
I am currently on WETA US996, but as described in the second post, I cannot get LTE to work without disabling it first, switching to GSM/UMTS, then activating LTE.
Once I switch over to Wifi for a period of time, then switch back to cellular data (example: leaving the house), I lose all data and have to disable LTE again, enable GSM/UMTS, then reactivate LTE to get LTE data.
Phillis said:
Hello,
I am currently on WETA US996, but as described in the second post, I cannot get LTE to work without disabling it first, switching to GSM/UMTS, then activating LTE.
Once I switch over to Wifi for a period of time, then switch back to cellular data (example: leaving the house), I lose all data and have to disable LTE again, enable GSM/UMTS, then reactivate LTE to get LTE data.
Click to expand...
Click to collapse
have you tried a dif option such as global? or WGSM Etc? You may need to select a dif option.
@ME2515 also gave the idea to edit your apns master file in system, so its always holding the apns for your carrier, in theory it would force the device to keep the settings as they become the "default" all the time, vs the devices default auto setting for example.
Team DevDigitel said:
have you tried a dif option such as global? or WGSM Etc? You may need to select a dif option.
@ME2515 also gave the idea to edit your apns master file in system, so its always holding the apns for your carrier, in theory it would force the device to keep the settings as they become the "default" all the time, vs the devices default auto setting for example.
Click to expand...
Click to collapse
Hello,
As explained in previous posts, the APNs are properly configured as per Fido settings automatically on the device. I triple checked to make sure all entries were correct.
LTE does work, but only going through the following steps: Go in Network Mode, disable Global , enable LTE/GSM/UMTS, then set submode to "GSM/GPRS/EDGE only" or "UMTS/HSPA/HSPA+ Only" , wait for a data connection, then change it to "LTE/LEgacy 3GPP Multi". Only then will LTE work, and once I switch to wifi, it won't get any LTE data when I disconnect from Wifi unless I go through that procedure again.
Am I really the only one with this problem?
Triple checked APN, it is correct. It's fetched autmatically from Fido when I connect to the network. Still no LTE unless I do the procedure above.
Reply in case someone encounters this issue. The APN setting for LTE was the culprit. I setup the APN as it it weren't an LTE device following the fido directives (using Fido-core-appl1.apn instead of LTEMOBILE.APN) and now get LTE connection when network is set to global.
Phillis said:
Hello,
I am currently on WETA US996, but as described in the second post, I cannot get LTE to work without disabling it first, switching to GSM/UMTS, then activating LTE.
Once I switch over to Wifi for a period of time, then switch back to cellular data (example: leaving the house), I lose all data and have to disable LTE again, enable GSM/UMTS, then reactivate LTE to get LTE data.
Click to expand...
Click to collapse
when installing wetarom to your LS997, what did you select as your device model in the installer? Unlocked US996 or Verizon VS995
einsteino said:
when installing wetarom to your LS997, what did you select as your device model in the installer? Unlocked US996 or Verizon VS995
Click to expand...
Click to collapse
ouch...that was long ago. I do not remember. I bought an unlocked US996 afterwards and sold the 997. Now with an S9+, which again gives problems..lol
Hi All - hoping to get your help and advice.
Original S8 was a USA SM-G950U on T-Mobile that was successfully flashed and unlocked to SM-G950U1 (CSC = XAA). The phone was fully functional, successfully received OTA updates and was on the latest firmware (G950U1UES5CRL2) in use in Hong Kong (3HK 4G LTE) until yesterday when I did a hard-reboot and cache-wipe a few days after a system update and now the cellular radio won't connect to any network. I've tested the SIM card (works fine on other phones), rebooted without the SIM inside (no impact), tried upgrading to Android 9.0 as well as older Bootloader v5 firmware to see if the cellular radio would turn on and re-connect but no luck.
Current State: When looking under "Mobile networks", Network mode shows "Preferred network mode: CDMA/EVDO/GSM/WCDMA" whereas it used to be "LTE/3G/2G". This option is available under the drop down list but I can't selected it. Under "Network Operators", tapping "Search networks" results in an error "Error while searching for networks". Tapping "Select automatically" pops an error "Unable to connect. Try later".
After exhaustive testing, it feels like the phone is behaving like it's SIM-locked since everything else works thru wifi but it's on the SM-G950U1 XAA unlocked firmware so it shouldn't be locked?? Any suggestions would be greatly appreciated.
eyecee said:
Hi All - hoping to get your help and advice.
Original S8 was a USA SM-G950U on T-Mobile that was successfully flashed and unlocked to SM-G950U1 (CSC = XAA). The phone was fully functional, successfully received OTA updates and was on the latest firmware (G950U1UES5CRL2) in use in Hong Kong (3HK 4G LTE) until yesterday when I did a hard-reboot and cache-wipe a few days after a system update and now the cellular radio won't connect to any network. I've tested the SIM card (works fine on other phones), rebooted without the SIM inside (no impact), tried upgrading to Android 9.0 as well as older Bootloader v5 firmware to see if the cellular radio would turn on and re-connect but no luck.
Current State: When looking under "Mobile networks", Network mode shows "Preferred network mode: CDMA/EVDO/GSM/WCDMA" whereas it used to be "LTE/3G/2G". This option is available under the drop down list but I can't selected it. Under "Network Operators", tapping "Search networks" results in an error "Error while searching for networks". Tapping "Select automatically" pops an error "Unable to connect. Try later".
After exhaustive testing, it feels like the phone is behaving like it's SIM-locked since everything else works thru wifi but it's on the SM-G950U1 XAA unlocked firmware so it shouldn't be locked?? Any suggestions would be greatly appreciated.
Click to expand...
Click to collapse
Just because you flash unlocked firmware does not remove the T-Mobile SIM lock
TheMadScientist said:
Just because you flash unlocked firmware does not remove the T-Mobile SIM lock
Click to expand...
Click to collapse
Thanks for your feedback! What's strange was that my S8 with the unlocked firmware (SM-G950U1) was working perfectly for 6 months and I was able to make calls, get LTE data connectivity, etc. Now the phone is still working via wifi but the cellular function is dead. Any suggestions or advice on how to remove the T-Mobile SIM lock?
eyecee said:
Thanks for your feedback! What's strange was that my S8 with the unlocked firmware (SM-G950U1) was working perfectly for 6 months and I was able to make calls, get LTE data connectivity, etc. Now the phone is still working via wifi but the cellular function is dead. Any suggestions or advice on how to remove the T-Mobile SIM lock?
Click to expand...
Click to collapse
We need to verify some how if it truly is Sim locked or not first.
TheMadScientist said:
We need to verify some how if it truly is Sim locked or not first.
Click to expand...
Click to collapse
I've tried 2 different SIM cards (though both from the same carrier) and both were not connecting to the mobile network. The phone can detect when there isn't a SIM card inserted so that is a minor indicator that the SIM card slot is functional.... any other suggestions on how to verify whether my S8 is SIM locked?
EDIT: Both SIM cards work in other phones (iPhone6s, iPhoneX).
eyecee said:
I've tried 2 different SIM cards (though both from the same carrier) and both were not connecting to the mobile network. The phone can detect when there isn't a SIM card inserted so that is a minor indicator that the SIM card slot is functional.... any other suggestions on how to verify whether my S8 is SIM locked?
EDIT: Both SIM cards work in other phones (iPhone6s, iPhoneX).
Click to expand...
Click to collapse
Of coarse not always but most of the time it will display a warning or something about sim not accepted. This sounds like to me. A couple things. Simlocked. Maybe install the T-Mobile firmware again and try the T-Mobile unlock app. It should say this device is already unlocked or successful. If that passes. It could be a disabled band or something. Sounds like the latter. Like it's not picking up your carriers signal. Again the us models I believe are pretty universal so maybe a different firmware may enable it again. Or last the device has somehow become blacklisted which unfortunately I have seen plenty of people here in US sell devices still on contract maybe pay a few months and quit then blacklists
eyecee said:
Hi All - hoping to get your help and advice.
Original S8 was a USA SM-G950U on T-Mobile that was successfully flashed and unlocked to SM-G950U1 (CSC = XAA). The phone was fully functional, successfully received OTA updates and was on the latest firmware (G950U1UES5CRL2) in use in Hong Kong (3HK 4G LTE) until yesterday when I did a hard-reboot and cache-wipe a few days after a system update and now the cellular radio won't connect to any network. I've tested the SIM card (works fine on other phones), rebooted without the SIM inside (no impact), tried upgrading to Android 9.0 as well as older Bootloader v5 firmware to see if the cellular radio would turn on and re-connect but no luck.
Current State: When looking under "Mobile networks", Network mode shows "Preferred network mode: CDMA/EVDO/GSM/WCDMA" whereas it used to be "LTE/3G/2G". This option is available under the drop down list but I can't selected it. Under "Network Operators", tapping "Search networks" results in an error "Error while searching for networks". Tapping "Select automatically" pops an error "Unable to connect. Try later".
After exhaustive testing, it feels like the phone is behaving like it's SIM-locked since everything else works thru wifi but it's on the SM-G950U1 XAA unlocked firmware so it shouldn't be locked?? Any suggestions would be greatly appreciated.
Click to expand...
Click to collapse
Have the same problem, have SM-G950U TMB Bad ESN , get Unlock/Unfreeze codes from support T-Mobile, easy unlock FRP, unlock phone througt codes, can't unlock network througt T-Mobile app, use samtool - unlock network shows TMB/XAA/TMB, after restart phone are can't see network, can't find network, with signal all ok and in other phones all ok with sim. Try to change SCS to XAA -> can't find network, try flash SM-G950U1 latest frim -> Not working, Try Flash SM-G950U TMB Latest - Model/Network status wrong... odin error... , Now can't flash any SM-G950, only SM-G950U1XXXXXX , try 950U1 TMB not work, and trying many SPR,XAS,XAA,VZN ... in all frimwares network don't work. now don't know what to do, possible i will try to flash SM-G950F
Nirexes said:
Have the same problem, have SM-G950U TMB Bad ESN , get Unlock/Unfreeze codes from support T-Mobile, easy unlock FRP, unlock phone througt codes, can't unlock network througt T-Mobile app, use samtool - unlock network shows TMB/XAA/TMB, after restart phone are can't see network, can't find network, with signal all ok and in other phones all ok with sim. Try to change SCS to XAA -> can't find network, try flash SM-G950U1 latest frim -> Not working, Try Flash SM-G950U TMB Latest - Model/Network status wrong... odin error... , Now can't flash any SM-G950, only SM-G950U1XXXXXX , try 950U1 TMB not work, and trying many SPR,XAS,XAA,VZN ... in all frimwares network don't work. now don't know what to do, possible i will try to flash SM-G950F
Click to expand...
Click to collapse
You can't fish 950f different chipsets. What country are you trying to use it in. If it's blacklisted that's more than likely your answer right there.
TheMadScientist said:
You can't fish 950f different chipsets. What country are you trying to use it in. If it's blacklisted that's more than likely your answer right there.
Click to expand...
Click to collapse
Yeah can't flash 950F, Russia - No T-Mobile here. Don't know what to try right now, possible try get stock TMB, then unlock network again if its lock. No blacklists, T-Mobile support says status Clear, but maybee contract on T-Mobile not paid. Trying to flash custom modem, but didn't help too.
Stats here:
ADBSN: 98892A415243565036
MODEL NAME: SM-G950U1
DID: 205E7D06ED39
BOOTLOADER: G950U1UES7DSK4
PDA VERSION: G950U1UES7DSK4
MODEM VERSION: G950U1UES7DSK4
CSC VERSION: G950U1UES7DSK4
MODEM BOARD: MSM8998
ANDROID VERSION: 9
CARRIER: XAA
SALE COUNTRY: USA
CPU: QCOM
SIM STATE: LOADED
SIM CONFIG: SS
USB CONFIG: MTP,ADB
Warranty Bit: 0
USB Modem Connection Detected!
Model Name: SM-G950U1
IMEI: 355987081639857
SN: R28J41FBDBJ
UID: 98892A415243565036
SWVER: G950U1UES7DSK4/G950U1UES7DSK4/G950U1UES7DSK4/G950U1UES7DSK4/G950U1OYM7DSK4