Code:
/*
* Your warranty is now void.
*
* I will not accept responsibility for any adverse effects to your device,
* including, but not limited to: bricking, dead SD card, bootloops etc.
*
* You mod your device at your own risk.
*/
INTRODUCTION
I picked up the work that @Schischu and @malosasha have done and plan on improving it with the work i have done on the lineage base.
For now i will only be building for chagallltetmo but this build can be flashed on chagalllte (T805) you will just not have working data/calling/texting due to changes i did to support the T-Mobile variant.
Maybe in the future i will build it for more. If anyone would like to build the other variants i am open to it and it can share this op if desired.
DOWNLOAD
aosp-chagallltetmo.deadman.20170308.235721.zip
OLDER DOWNLOADs
aosp-chagallltetmo.deadman.20170304.153956.zip
GAPPS
Use OpenGapps
OTA - UPGRADES
They are not supported you will need to manually flash updates
PREREQUISITES
TWRP 3.0.0 or higher. I always use @ashyx newest builds (TWRP builds by @ashyx)
You must be on a lollipop bootloader this can be done by either flashing 5.0.2 stock rom or by flashing this zip in odin https://www.androidfilehost.com/?fid=4996500813288308788 (This zip is for SM-T807T Only!!)
Don't skip this step! If the incorrect bootloader is used your device WILL NOT BOOT!
INSTALLATION INSTRUCTIONS
First time flashing the rom on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash AOSP
Install the Google Apps addon package (Optional)
Reboot
CURRENT CHANGELOG
3/08/2017
Removed a ton of under the hood hacks and fixed them properly (Shim blobs instead of editing the source to support them, Add mmap support, Fix the wifi state machine instead of disabling ip reachability, etc)
Removed a bunch of proprietary blobs that were not needed (Builds are now 11mb's smaller)
Updated the drm blobs to a newer version from bullhead
Updated the GPS and Bluetooth blobs from stock chagallltetmo
Fix Bluetooth name
GPS locks faster
OLDER CHANGELOGS
3/4/2017 Build
Initial ril support chagallltetmo (Defaults to 3g on first boot)
Added memtrack support from the newer 5422 based bsp that we use on lineage
Fixed mtp host fc on first boot
Fixed video recording
Updated prebuilt omx blobs
Made the QS menu bigger to be inline with lineage
ISSUES
Ril is still very unstable and is not working for everyone
HD Video stutters
More that i may have missed
SOURCE CODE
Manifest
Kernel
SCREENSHOTS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
XDA:DevDB Information
[ROM][AOSP 7.0] [SM-T807T] (Chagallltetmo), ROM for the Samsung Galaxy Tab S
Contributors
deadman96385
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
Version Information
Status: Beta
Created 2017-03-05
Last Updated 2017-03-04
Reserved
Reserved
I like your passion, digging up this rom.
deadman96385 said:
PREREQUISITES
Applied bootloader update, e.g. by flashing this zip in odin https://www.androidfilehost.com/?fid=4996500813288308788
Don't skip this step! If the incorrect bootloader is used your device WILL NOT BOOT!
Click to expand...
Click to collapse
Questions:
-if the T807T bootloader is a requirement, how would it work on T805? I imagine possibility for catastrophe if the wrong bootloader is flashed amiright?
-Could you comment on t805w bootoader w.r.t this requiement?
weeekwo said:
I like your passion, digging up this rom.
Questions:
-if the T807T bootloader is a requirement, how would it work on T805? I imagine possibility for catastrophe if the wrong bootloader is flashed amiright?
-Could you comment on t805w bootoader w.r.t this requiement?
Click to expand...
Click to collapse
Kitkat bootloaders do not work anymore so you must upgrade to a lollipop based one. If your on a lollipop one no matter what model you are fine. T805W specifically you can flash this fine you just will not get any form of data/calling/texting same as T805. I put it in the OP because not everyone updates the bootloader.
I think I love you
EDIT: Ok just flashed this. Installed smoothly.
Your OP was correct that it defaulted to 3G, but when I change it to LTE it shows that I have bars but no LTE and connecting to the web says I am not online. Is LTE not working at all?
RelayTech said:
I think I love you
EDIT: Ok just flashed this. Installed smoothly.
Your OP was correct that it defaulted to 3G, but when I change it to LTE it shows that I have bars but no LTE and connecting to the web says I am not online. Is LTE not working at all?
Click to expand...
Click to collapse
huh mine take a bit after switch to LTE to actually display but it does after a little bit. But i am still working to make ril more stable currently the telephony code is not reading the modem properly so its all over the place signal wise.
i'm following this.. how are you guys doing to so far on this rom? ill flash once all is sorted out.. are you guys getting 4g? all else working? what about a phone dial pad? how is it on t-mobile?
New build in OP
Changelog:
Removed a ton of under the hood hacks and fixed them properly (Shim blobs instead of editing the source to support them, Add mmap support, Fix the wifi state machine instead of disabling ip reachability, etc)
Removed a bunch of proprietary blobs that were not needed (Builds are now 11mb's smaller)
Updated the drm blobs to a newer version from bullhead
Updated the GPS and Bluetooth blobs from stock chagallltetmo
Fix Bluetooth name
GPS locks faster
Current known bugs:
Ril is still very unstable and is not working for everyone
HD video stutters
Thanks for the update. You were right, it took a while for it to switch over to LTE but it did, it doesnt show bars but it shows LTE. A speed test shows it works but not at full speeds. Will stick with HSPA for now as its faster than the LTE im getting.
RelayTech said:
Thanks for the update. You were right, it took a while for it to switch over to LTE but it did, it doesnt show bars but it shows LTE. A speed test shows it works but not at full speeds. Will stick with HSPA for now as its faster than the LTE im getting.
Click to expand...
Click to collapse
Thanks for getting back to me yeah its a bit derpy still just glad it works for now.
An issue I found that wasn't listed has to do with the fingerprint scanner. When setting up a fingerprint for unlock, it is detected and works, but once stored and trying to use the scanner on the unlock screen, nothing. Also trying to remove stored fingerprints crashes the settings app.
Wireless Disconnect
Wireless seems to drop after being connected for a bit and will not let you search for an ssid until you turn it off and then back on again. Battery life is insane and everything else is buttery smooth! You brought life back to this tablet, it sucks we can't use any of the well known roms..or can we?
Thank you so much Deadman for the work on this. Are you planning on mantaining this or do you want us to move to another ROM as well? I don't particularly care for the Cell features as I do a functional stable rom .
Just installed, rom works great... some intermittent in and out on T-mobile network. I have tried everything from Nougat on Lineage to AOKP and neither of them boot.
Iron Man boots but I cant get LTE.
Looking forward to future updates and development on this ROM.
Thanks for Hard Work.
deadman96385 said:
Kitkat bootloaders do not work anymore so you must upgrade to a lollipop based one. If your on a lollipop one no matter what model you are fine. T805W specifically you can flash this fine you just will not get any form of data/calling/texting same as T805. I put it in the OP because not everyone updates the bootloader.
Click to expand...
Click to collapse
does this mean I can use this for the sprint t807p variant? Im somewhat confused by what you meant any model, you are fine.. lol.. thanks ..
@deadman96385 I had this rom running for a few days and it was spectacular. Only major issue was the data services all over the place., which fro me is a deal breaker. If theres anything I can do to help PLEASE let me know. whether its testing / building / donating.
cheers
NJ_RAMS_FAN said:
does this mean I can use this for the sprint t807p variant? Im somewhat confused by what you meant any model, you are fine.. lol.. thanks ..
Click to expand...
Click to collapse
Not the Sprint variant that's a snapdragon device
mxvris said:
@deadman96385 I had this rom running for a few days and it was spectacular. Only major issue was the data services all over the place., which fro me is a deal breaker. If theres anything I can do to help PLEASE let me know. whether its testing / building / donating.
cheers
Click to expand...
Click to collapse
I halted work on this variant for now because my SIM card slot broke and I don't have the funds right now to buy the part/tools to fix it. But in a month or two I should be able to.
[/PHP]
deadman96385 said:
Not the Sprint variant that's a snapdragon device
I halted work on this variant for now because my SIM card slot broke and I don't have the funds right now to buy the part/tools to fix it. But in a month or two I should be able to.
Click to expand...
Click to collapse
Figured. Lol. Somebody gave it to me. I was thinking of looking for a sm-t800 broken just for the board.
I installed the rom, Data works fine but i cannot make calls or send sms, it says service disabled. Anyone knows how to fix it?
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://download.cyanogenmod.org/
KLTE GSM CM Forum
KLTVD/S CDMA (Sprint/Verizon/USC) CM Forum
I couldn't find a thread dedicated to this, so..... As well all know, CM has turned on the builds for the Samsung Galaxy S5 variants and builds have been churning out for the past few weeks. However, they are still weeks behind @albinoman887's unofficial builds, missing various fixes and what have you. So this is a thread for those of you who wish to try out the official nightlies and want to post bugs or feedback without cluttering the unofficial's thread. If you want to help get things going smoothly, contact Ethan Chen (https://twitter.com/intervigil) and ask him to push Matt's (albinoman887) changes through. With that said, some info from albinoman887 (sorry, had to borrow this):
albinoman887 said:
Built from CM source
Service
Text
Data
Call
Audio
WiFi
Google Now
Bluetooth
GPS
MMS
Video playback
Audio playback
Internal/External SDcard mounting
Camera
Video recording
IR Blaster
NFC
Touchscreen in some games....
Lots of CM features you expect are missing at this point. All devs are working on adding all your favorite features of CM back in.
CM Camera app is buggy as hell right now, use Google Camera
Do NOT use superwipes
Wipe data, cache, and dalvik cache
** (if you are simply applying an update to this rom base this might not always be required)
*** ((but do not report bugs if you didn't full wipe))
Flash ROM
Flash GAPPS (in 2nd post) (No other gapps packages are officially supported!)
Reboot
???
Profit
To enable Developer Options and Performance go to Settings, About Phone and repeatedly press Build Number.
If you use ADB read this: PSA by CM
If you use reboot to recovery read this: PSA by CM
Regarding new Superuser: PSA by CM
Read the FAQ thread here before posting any questions in this thread: FAQ
And any and all users in this thread who contirbuted or will contribute to making this ROM as stable as possible
Esa Laukkanen aka elelinux
Cyanogen Inc & Team-Kang
Garwynn XDA
albinoman887
Contributors
albinoman887
Source Code: https://github.com/Team-Hydra
Click to expand...
Click to collapse
WARNING! This ROM is for the SM G900* snapdragon only! This will not work on the octa-core or Exynos versions
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.0 (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
CM-12.0 Install Guide
Note: CM for Galaxy S5 LTE is provided with no warranty. You are installing this software at your own risk. You may be violating your warranty.
Download CM-12.0 and gapps-lp zips, kernel, TWRP 2.8.4.0 and other zip stuff and put in /sdcard
ROM: http://download.cyanogenmod.org/?device=klte
gapps: http://forum.xda-developers.com/par...apps-official-to-date-pa-google-apps-t2943900
Use TWRP 2.8.1.0 tar flash thru odin http://techerrata.com/file/twrp2/klte/openrecovery-twrp-2.8.1.0-klte.tar and thru this recovery flash this one Ktoonsez TWRP 2.8.4.0
http://goo.gl/LgBsuk
[*] Wipe data and cache.
[*] Flash cm-12*.zip.
[*] Flash gapps*.zip. You must flash gapps after every upgrade to CM-12.0 since /system is formatted, wiping your previous add-ons.
[*] Reboot phone.
for now on CM12 nightly works best with Ktoonsez kernel http://goo.gl/LgBsuk
thread: http://forum.xda-developers.com/showthread.php?t=2777842
Upgrades
Upgrades from previous versions of CM-12.0 are the same process as install, except you do not need to wipe anything. Contrary to popular belief, you do not need to even wipe cache and dalvik-cache when upgrading between CM-12.0 versions. You only need to wipe if you are doing a major upgrade, switching to a different ROM entirely, or attempting to fix bugs caused by bad backups or corrupt app data.
other stuff
Camu camera and camcorder app: https://play.google.com/store/apps/details?id=com.sumoing.camu&hl=en
Emoji switcher https://play.google.com/store/apps/details?id=com.stevenschoen.emojiswitcher
Whattsap time/date fix https://drive.google.com/file/d/0B9hyzUTns_hgX2xiTTJjQjNXd1k/view?usp=sharing (flash thru recovery, reboot and it works.)
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
---------- Post added at 12:18 AM ---------- Previous post was at 12:05 AM ----------
28.01. nightly, kt 28.01. kernel works fine..
is quick unlock still not merged in CM? like it was in cm 11.. i have to pull screen up and than unlock..
using Camu camera app https://play.google.com/store/apps/details?id=com.sumoing.camu&hl=en
which gapps package guys you use? nano, pico?
except one fc of stock dialer and 3 hours of good working..
tinko975 said:
WARNING! This ROM is for the SM G900F snapdragon only!
28.01. nightly, kt 28.01. kernel works fine..
is quick unlock still not merged in CM? like it was in cm 11.. i have to pull screen up and than unlock..
using Camu camera app https://play.google.com/store/apps/details?id=com.sumoing.camu&hl=en
which gapps package guys you use? nano, pico?
except one fc of stock dialer and 3 hours of good working..
Click to expand...
Click to collapse
Change that red text to "WARNING! This ROM is for the SM-G900* Snapdragon variants only! This will not work on the octa-core or Exynos versions."
I might also want to add that it is said that it is best to use the official Gapps from here, but the PA Gapps have worked fine for me.
I have contacted Ethan Chen and he said that he just hasn't had time to look at the S5 lately. Sounds a bit promising.
My results on the 1/28 nightly with ktoonsez' 1/25 kernel build:
* Bluetooth pretty much set, occasional minor hiccups on my car audio but otherwise great.
* Bluetooth does still occasionally completely crap itself and stop audio playback after a long period of time (>5 hours). If this happens, a reboot is required, and trying to turn bluetooth off and back on results in an FC in Bluetooth Share.
* Camera is still crashing when taking low-light photos.
Haven't encountered any other issues so far.
Edit: OP mentioned TWRP recovery; I'm using philz touch with no issues.
On 900i (kltedv) doesn't work NFC !
The 1/30 nightly has issues with the Recents menu - it seems that the majority of the time, trying to activate it from within an app silently fails. It does work from the home screen, though.
sylvisj said:
The 1/30 nightly has issues with the Recents menu - it seems that the majority of the time, trying to activate it from within an app silently fails. It does work from the home screen, though.
Click to expand...
Click to collapse
Confirmed
The issue with the recents menu in the 1/30 nightly is resolved in 1/31.
I'm testing 1/31 with ktoonsez 1/9 aosp kernel (last one with Samsung sources) for my Bluetooth issues.
we want cm on our g900h since samsung have released source code
Airboner said:
we want cm on our g900h since samsung have released source code
Click to expand...
Click to collapse
oh wow, you weren't kidding - they released source for all the g900* builds, it seems - even my g900t.
http://opensource.samsung.com/reception/receptionSub.do?method=sub&sub=F&searchValue=g900 in case anyone didn't know
Maybe we can get some clues for fixes to the bluetooth issues now
sylvisj said:
oh wow, you weren't kidding - they released source for all the g900* builds, it seems - even my g900t.
http://opensource.samsung.com/reception/receptionSub.do?method=sub&sub=F&searchValue=g900 in case anyone didn't know
Maybe we can get some clues for fixes to the bluetooth issues now
Click to expand...
Click to collapse
and what meaning has g900t with the question that i asked metioning on g900h ?
P.S. sry but maybe didnt get y
Latest nightly with latest kernel cpu profile ktoonservatique using dark holo theme
Airboner said:
and what meaning has g900t with the question that i asked metioning on g900h ?
P.S. sry but maybe didnt get y
Click to expand...
Click to collapse
http://opensource.samsung.com/reception/receptionSub.do?method=sub&sub=F&searchValue=g900h
They're all there. All of them.
sylvisj said:
http://opensource.samsung.com/reception/receptionSub.do?method=sub&sub=F&searchValue=g900h
They're all there. All of them.
Click to expand...
Click to collapse
i know but still cant get the reason u quoted me metioning about your model :/
anyway. as i said,since samsung have released opensource of g900h
i would like cm to develop on g900h
Airboner said:
i know but still cant get the reason u quoted me metioning about your model :/
anyway. as i said,since samsung have released opensource of g900h
i would like cm to develop on g900h
Click to expand...
Click to collapse
Not sure how that would allow them to develop for the 900H?
12-20150201-NIGHTLY-klte
Just flashed the latest nightly coming from touchwiz stock on my NZ SM-G900I.
Issue 1: NFC won't turn on, just stays grayed out when you press it.
Issue 2: WiFi connects no problem to 2.4 and 5GHz networks, but it is so ridiculously slow. Maxing 100Kb/s download, and 40Kb/s upload, but the average is a lot slower. Reboot hasn't changed the speed at all, so I'm thinking it's a radio issue. It also takes a long time to connect to any cellular network after reboots.
Issue 3: (not so much an issue) but it now shows my device model as SM-G900F in settings, but it is definitely a SM-G900I model.
GuyInDogSuit said:
Not sure how that would allow them to develop for the 900H?
Click to expand...
Click to collapse
i dont know but hope that somebody will try
Flashed 02.01. with stock kernel. No fc after reboot and reboot is not so long..
in one moment i loose mi 3G data and after 3 reboots it come back..
My is still booting slow and i have still the system process fc error.
What recovery are you using?
tinko975 said:
Flashed 02.01. with stock kernel. No fc after reboot and reboot is not so long..
in one moment i loose mi 3G data and after 3 reboots it come back..
Click to expand...
Click to collapse
1.2.2015. build with stock kernel. I'm truly impressed.
Sent from my SM-G900F
INTRODUCTION
This rom is just a revival work based on the awesome rom from @Schischu in this thread. @Schischu managed to port aosp 6.0 to the galaxy tab S family before samsung ever annouced it, then reiterated the exploit by porting aosp 7.0 to it. Unfortunatly he kind of paused/stopped the job without further notice. So i have revived and will maintain this rom until he eventually decide to take back the project.
I have been downloading roms on xda for various phones since my first htc tytn smart phone almost 10 years ago and one thing that really bother me is that one never know if the job will be stopped or when a new release will be out. So while i consider that this is pure fun and the devs have no obligations to the end users, i will keep this rom alive by applying the monthly patch from Goggle (Around the 10th of each month). The only reason that i could stop doing so is that my galaxy Tab S is lost/stolen or eating by the kids (bet on that one ), if so i will notify it here. I can only really test on the T805 too btw, don't have the other variants.
DOWNLOAD
aosp_chagalllte-userdebug-20161116.zip (md5)
aosp_chagallwifi-userdebug-20161116.zip (md5)
aosp_klimtlte-userdebug-20161116.zip (md5)
aosp_klimtwifi-userdebug-20161116.zip (md5)
GAPPS
I am not using gapps so i can't really test it. however i can post the latest confirmed version based on post/pms
LATEST WORKING VERSION : 2016-11-16 (with GApps 2016-Nov-17)
OTA - UPGRADES
I do not plan to maintain OTA. and i will even disable the options in an upcoming release.
However it would be great if someone could maintain an ota branch & OpenDelta server each time a new rom is published.
If you are interested contact me in PM to setup the procedures together.
You can always manually upgrades from twrp (zip or sideload), just clean cache & dalvik after each upgrades and always reinstall Supersu (and gapps)
PREREQUISITES
TWRP 2.8.6.2 or higher. I always use @ashyx newest builds (TWRP builds by @ashyx)
Applied bootloader update, e.g. by
flashing the stock 5.0(or higher) samsung rom or
by applying bootloader directly with odin (link).
Don't skip this step! If the incorrect bootloader is used your device WILL NOT BOOT!
INSTALLATION INSTRUCTIONS
Cleaning System
This step is only necessary on the initial installation.
Reboot into recovery. Go into wipe menu. Select "Advanced Wipe". Check
Dalvik Cache
System
Cache
Data
and wipe them. Don't reboot just yet.
Install this ROM
Go into Install
Flash aosp-XXX.zip
On initial installation it is necessary to Reboot to Recovery. Don't skip this step!
(E:unknown command [log] messages can be ignored.)
Install Google Apps and SuperSU
Go into Install
Flash GAPPS.zip
Flash SuperSU.zip
Reboot to System
CHANGELOG
20161116
Fix CVE-2016-5195 (DirtyCow) Kernel privilege exploitation bug
Those with compil skills can test before and after flashing with this poc : CVE-2016-5195 Poc
Fix Bug : Graphical glitches on rotation
[T705/T805]Fix Bug : No Data Connection
Rem If dirty flashing from aosp 6 it is necessary to delete those folders :
Code:
adb root
adb shell rm -Rf /data/data/com.android.providers.telephony/databases
adb shell rm -Rf /data/data/com.android.providers.telephony/files
Fix Bug : No GPS localization (device only)
Disable OTA options from settings (OpenDelta still included from the moment (read above)
Enable TunerActivity by default (Appears below developer options in Settings)
Use apns conf list from CyanogenMod project and add 2 apns for Gabon
[Untested] Add a list of webview providers
Require gapps to be installed
Read here
Fix some typos in shutdown/reboot dialog
20161110
Initial Version based on @Schischu work
Update to November Patch
ISSUES
CONFIRMED
[T705/T805] Tablet may crash and reboot when starting phone call, and overall ril intability (audio quality , ...)
Stock camera app works, but crashes when recording video. Better Camera and other gapps camera app crashes too.
Screen cast (mirroring)doesn't work
Picture taken in portrait mode are not rotated in gallery (lack of orientation metadata ? )
[T800/T805] Impossible to register a new fingerprint (Crash in Settings)(fixed in upcoming release)
Phone call Activity does not display common controls (mute , speaker , ....)
Tablet encryption does not work (neither FDE nor FBE)
SEAndroid policy is not enforced
UNCONFIRMED (Need further proof to accept or reject)
Wifi seems to disconnect during long usage for some users
Wifi stays connected while icon is off
4G not working
Huge battery drain in some misconfigured situation ( may be related to min cpu freq)
Youtube video playing in 1440 or 1080 resolution can be laggy
A reference video would be enough to confirm the bug
UNTESTED FEATURES
Infrared remote
Confirmed to work for at least two user ( @Orphee / @Deltafox79) but waiting for confirmation about the need of this patch
DONATION
Donate to Schischu
Donate to me
Bitcoin : 1CTH7mFUdgPow4Gzzrbbm8mgCa8Q1kohPU
Paypal : TODO ( Can't receive Confirmation SMS for mobile phone in my country so far ;( )
REMARK
TODO
TIPS'n'TRICKS
MTP mount are sometimes (each time for me under linux) not browsable after plugging the tablet. As workaround going to Developer options -> Select Usb Configuration and re-choosing MTP, remount it correctly
If 5Ghz Wifi does not work , you need to change the region in Settings->Wifi->Settings->Wifi country code
Hearthstone and serveral other Unity games: Enable 4x MSAA in development options else it won't work
Slither.io and a few other games don't run if 4x MSAA is enabled: Disabled 4x MSAA in development options else it won't work
If you install Gapps after the ROM has been booted for the first time you either need to wipe data or manually delete /data/system/users/0/runtime-permissions.xml and reboot. Without this Gapps will crash constantly. This is due to the new permissions-system in M.
SOURCE CODE
Manifest : https://github.com/alexmaloteaux/android_chagall_klimt
Kernel : https://github.com/alexmaloteaux/android_kernel_samsung_chagalllte
SCREENSHOTS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LEGAL NOTICE
Code:
/*
* Your warranty is now void.
*
* I will not accept responsibility for any adverse effects to your device,
* including, but not limited to: bricking, dead SD card, bootloops etc.
*
* You mod your device at your own risk.
*/
XDA:DevDB Information
AOSP 7.0 For Galaxy Tab S, ROM for the Samsung Galaxy Tab S
Contributors
malosasha, Schischu
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Beta
Current Beta Version: 2016-11-10
Created 2016-11-13
Last Updated 2016-11-26
Reserved
ARCHIVES
20161110
aosp_chagalllte-userdebug-20161110.zip (md5)
aosp_chagallwifi-userdebug-20161110.zip (md5)
aosp_klimtlte-userdebug-20161110.zip (md5)
aosp_klimtwifi-userdebug-20161110.zip (md5)
Thanks dude! I have a T800 and was really hoping we'd see more action on the Nougat ROM. I am going to dirty flash this over Schischu's ROM and let you know how it goes.
Dirty flashed over @Schischu's previous build. Booted with no problems. Can confirm these issues (which existed already on the old build):
Stock camera app works, but crashes when recording video. A Better Camera app crashes.
NBC/Universal video apps (SyFy now, for instance) will play commercials, but not the selected video.
Screen still glitches when changing orientation.
Wow I can't remember the last time I posted a thank you on the very first page of a new ROM thread.
I too have been here since before Android but my first smartphone was a device with a physical keyboard. Then my first android phone was the famous HTC Dream, then I replaced that with the first Nexus phone and the Vibrant as well.
Thanks for giving us something to play with and hopefully use as a daily.
Sent from my SM-T700 using Tapatalk
amateurhack said:
Dirty flashed over @Schischu's previous build. Booted with no problems. Can confirm these issues (which existed already on the old build):
Stock camera app works, but crashes when recording video. A Better Camera app crashes.
NBC/Universal video apps (SyFy now, for instance) will play commercials, but not the selected video.
Screen still glitches when changing orientation.
Click to expand...
Click to collapse
Nice catch. I added the stock camera / video one to the list after testing . I ll check it but i have a fixable todo list for at least 1 - 2 weeks
Did it worked on aosp6 ? If yes i may have an idea of the actual issue.
SkOrPn said:
Wow I can't remember the last time I posted a thank you on the very first page of a new ROM thread.
I too have been here since before Android but my first smartphone was a device with a physical keyboard. Then my first android phone was the famous HTC Dream, then I replaced that with the first Nexus phone and the Vibrant as well.
Thanks for giving us something to play with and hopefully use as a daily.
Sent from my SM-T700 using Tapatalk
Click to expand...
Click to collapse
good old times My first phone runnign android was the htc tytn (win mobile) or maybe tytn2 some guys from xda managed to port it to it
malosasha said:
good old times My first phone runnign android was the htc tytn (win mobile) or maybe tytn2 some guys from xda managed to port it to it
Click to expand...
Click to collapse
You know I remember my brother got the tytn around the same time I got the first android or abouts. Kinda hard to remember now but I'm sure he had the tytn. I think it was spelled like this TyTN and it ran windows mobile. I had one but I remember it being broken I think. Was a great concept too.
The Vibrant (same as the Galaxy S) was the first device that I actually waited for the t-mobile store to open up lol. It was the first device that really got me hooked on flashing custom anything.
For the most part I have been quite disappointed with this tablet of mine. Just not enough development for it. My 2012 Nexus 7 has better Roms which is really sad because the potential of this tablet is crazy good I think. purenexus on my N7 runs so much better than anything I have tried on this T700. Really really sad.
I hope someday we see 7.1 for this device. Lol
Sent from my SM-T700 using Tapatalk
malosasha said:
Nice catch. I added the stock camera / video one to the list after testing . I ll check it but i have a fixable todo list for at least 1 - 2 weeks
Did it worked on aosp6 ? If yes i may have an idea of the actual issue.
Click to expand...
Click to collapse
A Better Camera app and stock camera app both worked perfectly on AOSP 6.
Video apps worked fine too. There was speculation that there was a problem with the video drivers that affected 1080p playback in the YouTube app and such, and that was also the problem with the NBC/Universal apps.
First thanks you this ROM is really good! I have attached screenshot of the bug when we change the display size to bigger, the icon in the header isn't centered
And it's just a question but isn't the recent app (in landscape and I'm t800) too small? I mean it's shouldn't be larger ? It's looking a bit like marshmallow(screenshot too)
Thanks a lot :highfive:
robhug said:
First thanks you this ROM is really good! I have attached screenshot of the bug when we change the display size to bigger, the icon in the header isn't centered
Click to expand...
Click to collapse
Sorry but i don't get the issue you are having, i went to Settings->Display , Set to max Large and everyting seems correct.
robhug said:
And it's just a question but isn't the recent app (in landscape and I'm t800) too small? I mean it's shouldn't be larger ? It's looking a bit like marshmallow(screenshot too)
Thanks a lot :highfive:
Click to expand...
Click to collapse
Thats aosp default size i think , would be great to have a sc of pixel c to compare
amateurhack said:
A Better Camera app and stock camera app both worked perfectly on AOSP 6.
Video apps worked fine too. There was speculation that there was a problem with the video drivers that affected 1080p playback in the YouTube app and such, and that was also the problem with the NBC/Universal apps.
Click to expand...
Click to collapse
I tested some 1080 videos with webtube (fdroid) and all worked perfectly. Do you know one that fail for sure ?
malosasha said:
Sorry but i don't get the issue you are having, i went to Settings->Display , Set to max Large and everyting seems correct.
Thats aosp default size i think , would be great to have a sc of pixel c to compare
Click to expand...
Click to collapse
Haha the max large is a bit too big but this is really not the most important issue :good:
And I think I have a screen of pixel c: I'll sent to you in a few minutes but in landscape it's much larger and looks a bit better
Screenshots of pixel c recent menu
Really appreciate your time mate.
But, i will stay with AOSP 6.0 until 7.1 come out for Tab S family
Cheers and Goodluck.
---------- Post added at 09:52 AM ---------- Previous post was at 09:51 AM ----------
Those who experience a really slow charge and heavy drain,
Probably because the wifi scanning is turn on, and also ''ok google'' sound activation is activited in any screen.
robhug said:
Screenshots of pixel c recent menu
Click to expand...
Click to collapse
Ho ok it may still be the same code but differrent layout cause of different dpi.
Btw for screenshots you can do power + VOL Down, i discovered that yesterday
malosasha said:
Ho ok it may still be the same code but differrent layout cause of different dpi.
Btw for screenshots you can do power + VOL Down, i discovered that yesterday
Click to expand...
Click to collapse
I try all the display size and it's still the same layout but I think it's a tiny thing to change (don't know if it's possible )
Great Rom, Night Light by Braden Farmer works to get auto red filter.
Also I had some security warnings when re-installing some apps from Titanium. Like Anti-Malware warnings on Windows. Must be new security measures.
My first experiences with "malosasha's" ROM
My first experiences with "malosasha's" ROM:
To install the ROM, I followed your instructions and was surprised that everything worked out
I just installed SuperSU (SuperSU-v2.78-201609011115.zip) bevor the gapps.
Deadlights said:
If it helps anyone, I had the problem with gapps failing when flashing. And found that flashing SuperSU after the ROM and before the gapps fixed it for me. Tried several times and worked the same each way.
Click to expand...
Click to collapse
Then I istalled MyBackup from the ext SD and installed my secured apps.
Reboot and till now everything is working without any error.
I never had this bevor it was always a bit tricky to install a new ROM and the Gapps - Congratilations !!!
I am very glad that the development of our tab continues - Thanks a lot for your work !!!
Regards Klaus
I just tried IR and it works, I can power up/down my TV with the tablet.
Edit: can't have a GPS fix. Won't try in high accuracy mode.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Rom Sources are updated check out for latest builds and changelogs/Download Links Below!
Note:This Rom is neither Compiled nor Developed By Me All Credits To Compile Goes To
Crezil 1/Lunik
Credits
First of All I would like to thanks Crezil 1 (For Compiling rom for us and giving permission to post it on XDA) :good: :good:
Also i would like to say Thanks to vasiliy.ivanov Aka Lunik(Owner Of L-rom.ru)&Main Contributor Also Build Host Of most of Roms Without Him it was not Possible :fingers-crossed: :good: :good:
Source Link of his site L-Rom.ru thanks alot for contributing to mtk6735 platform
http://l-rom.ru/forum/1-%D0%BF%D0%BE%D0%B4%D0%B4%D0%B5%D1%80%D0%B6%D0%B8%D0%B2%D0%B0%D0%B5%D0%BC%D1%8B%D0%B5-%D0%BD%D0%B0%D0%BC%D0%B8-%D1%82%D0%B5%D0%BB%D0%B5%D1%84%D0%BE%D0%BD%D1%8B-%D0%BD%D0%B0-%D0%BC%D1%826735-%D0%B8-mt6753/
My Work is to find out Roms from different forums and Re-post them for Indian/Indonesian Users Have Permission To Post but still i don't have permission to post direct download link of rom
Code:
[B][SIZE="4"]#include
/*
* Your warranty is now void.
*
* Noobs keep distance
* Do not try if you dont know what is a "Rom"
* We aren't responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/[/SIZE][/B]
Firmware crDroid is on a level with Temasek one of the most famous custom firmware for Android phones. Currently, firmware crDroid All Android OnePlus One addition is used by many brands of phones Motorola, Google Nexus, HTC, LG , Samsung, OPPO and drugie.V it additionally built a lot of different functions from other custom firmware such as AOSPA, SlimRoms, OmniRom and RR, etc. . this crDroid is one of the most stable and customized firmware.
crDroidAndroid-v3.6_L-ROM.RU - Nougat Source 2017 for Meizi M2mini
(Android 7.1.2)
CORRECTIONS AND MODIFICATIONS
Update crDroidAndroid-7.1.2-v3.4_L-ROM.RU- OS Nougat Source 2017 for Meizu M2mini
Updated revision in the source r_17
Updated " Security " All Android on 05/06/2017
Root is built (Included in " Settings Developer ")
Support Substratum Theme Engine
The Display Live (it is better to turn off in order to avoid "brakes", nevertheless it is operational)
Night mode is turned on only after the tile in the curtain
Works Import with Sim card ( Export does not work in the process of correction )
"Hardware overlay " is enabled by default
Reduced download the firmware
Fixed camera SNAP (Do not hang up when take pictures)
Full system optimization
Built-in application " the Open GApps " for installation of the system Gapps
Note:-This New Version of VIP firmware is ported by me from meizu m2 note from 4pda
source page here https://4pda.ru/forum/index.php?showtopic=761874&view=findpost&p=65111375\
New Version Comes with fixed video recording but we have to compromise with lag less video playback at Youtube
so use 90 Overlay fix flash zip file to fix lag that's why use it and enjoy and for sound use Dolby mod
New Build Updates! VIP Firmware CORRECTIONS AND MODIFICATIONS
Added "Engineering menu MTK" settings are not all in Russian (Audio settings work) also added YGPS settings
Added theme movers from Paranoid Android (In the official version of the developer it does not and will not) Extras. Settings - Screen
Replaced launcher to launcher Lawnchair
Edits Communications
Added widget Weather LockClock of RR (compiled from source)
Small changes in the system
There are some changes in the advanced settings of
"security system" All Android from 05/08/2017
Works Import with Sim card (Export does not work in the process of correction)
Full system optimisation
ScreenShots
What works?
1)RIL (link) on the first and second SIM-card.
2)Data transmission over a mobile network.
3)WiFi (establish a connection with the access point, operating data)
4)GPS
5)The camera (the main and the front camera works, including works and video.
6)OMX hardware codecs
7)LED flash.
8)Sound
9)Live Display (it is better to turn off in order to avoid "brakes", the nemenee it is operational)
10)Record screen (screen recording)
11)Recording from a microphone (sound recording)
12)Bluetooth (tested transmit / receive files between two devices, work with other profiles such as headset, etc.
13)WiFi AP (creation WiFi access point)
14)Recording a conversation with a line of regular operating system tools
Download Links
New Updated Rom
https://drive.google.com/open?id=0Bz6Fq2POoJTlV0VKcW0wRW5QU0U
New Custom Kernel 4.9 For Latest CrDroid 3.7
https://drive.google.com/open?id=0Bz6Fq2POoJTlb1lOZEFGSWhGV2M
Sensor Fix For new Latest crDroid 3.7 too
https://drive.google.com/open?id=0Bz6Fq2POoJTldi1hanN5SjhGa00
90 Overlay Fix
https://drive.google.com/open?id=0Bz6Fq2POoJTlY0ZRTHRtR0wtSzA
Old Version Rom
https://drive.google.com/file/d/0B-BETpTtPA8RQmtndkMyN014LWs/view
Source Page
http://l-rom.ru/topic/129-crdroidandroid-v36_l-romru-nougat-source-2017-for-meizu-m2-mini-globalnoe-obnovlenie-ot-l-romru/
Note:-Download Battery toggle fix for android 7.1.2 rom to fix battery toggle bug :good:
https://forum.xda-developers.com/meizu-m2-mini/how-to/guide-fix-battery-saver-toggle-problem-t3627513
New Rom Latest one Flash This Patch It will fix Youtube Lag
https://drive.google.com/open?id=0Bz6Fq2POoJTlQzVxSW9MWndNams
Sources?
Developer Informed it he will not release sources of his work i can't do anything in this case
Open Sources By Devis 1969
Kernel Sources :good: :good:
https://github.com/divis1969/android_kernel_meizu_meilan2
Vendor Blobs :good: :good:
https://github.com/divis1969/android_vendor_meizu_meilan2
Device Tree :good: :good:
https://github.com/divis1969/android_device_meizu_meilan2
Don't Forget To Press Thanks if you like it :good: :good:
Regards~
Murtaza Piplod
Excellent ROM one bug I found is that after turning on live display phone starts to lag a bit and it's get unusable while screen recording it's necessary for Unlucky People like me who has red stripes defect on display fix this plz
And really appreciate your work thanks
[email protected] said:
Excellent ROM one bug I found is that after turning on live display phone starts to lag a bit and it's get unusable while screen recording it's necessary for Unlucky People like me who has red stripes defect on display fix this plz
And really appreciate your work thanks
Click to expand...
Click to collapse
rom do not lag but but transactions lag
go to settings and disable transactions animation
murtaza1326 said:
rom do not lag but but transactions lag
go to settings and disable transactions animation
Click to expand...
Click to collapse
Already disabled and it's only happens in nougat ROM but in cm12.1 its
works superfine
[email protected] said:
It's disable animations and it's only happens in nougat ROM but in cm12.1 its
works superfine
Click to expand...
Click to collapse
well its bcz of rom arch do not support live display up to notch for live display but in los it works perfectly
Works very good. Only thing i see that front camera doesn't work in few apps.
Adn wifi signal is weaker.
sensors patch added
laggy
even after flashing the IOS animation the system is laggy, what is wrong with it? and do you know how to make it smoother anything close to flyme 4 will also work. How can someone use such a firmware, that russian dude is good but what is the point when things are super slow?
r24patrik said:
even after flashing the IOS animation the system is laggy, what is wrong with it? and do you know how to make it smoother anything close to flyme 4 will also work. How can someone use such a firmware, that russian dude is good but what is the point when things are super slow?
Click to expand...
Click to collapse
who said it's super slow?? lol there is nothing like super slow here :v
it's all good i am using this firmwares based on stock android from past 3 months i didn't even find a lag here :v if i run multiple task heavy app usage and all it will lag but not that much as you say you are doing something wrong there is nothing like lags in this firmwares
murtaza1326 said:
who said it's super slow?? lol there is nothing like super slow here :v
it's all good i am using this firmwares based on stock android from past 3 months i didn't even find a lag here :v if i run multiple task heavy app usage and all it will lag but not that much as you say you are doing something wrong there is nothing like lags in this firmwares
Click to expand...
Click to collapse
okay if you say so but do you also say that every other nougat rom like RRmix for meizu m2, the roms you posted earlier are as smooth as this one is!? And can you point what actually might be the problem because we both have the same device!
r24patrik said:
okay if you say so but do you also say that every other nougat rom like RRmix for meizu m2, the roms you posted earlier are as smooth as this one is!? And can you point what actually might be the problem because we both have the same device!
Click to expand...
Click to collapse
i can't you just said its lagging but how i can know how it lags
2 possible reasons to lag is
1)Live display is enabled just disable it
2)Night mode is enabled just disable it
this 2 are only reason for any rom to lag
@murtaza1326 have you tried to root with magisk? What was the experience? I tried flashing from custom recovery but it always gets stuck on CRDROID booting screen. Any ideas?
lilcat1 said:
@murtaza1326 have you tried to root with magisk? What was the experience? I tried flashing from custom recovery but it always gets stuck on CRDROID booting screen. Any ideas?
Click to expand...
Click to collapse
i use magisk :v no problem
murtaza1326 said:
i use magisk :v no problem
Click to expand...
Click to collapse
Any idea why my phone gets stuck on CRDROID booting screen?
lilcat1 said:
Any idea why my phone gets stuck on CRDROID booting screen?
Click to expand...
Click to collapse
You flashed the custom kernel, didn't you?
What would be the appropriate steps to install this ROM
I flashed
ROM
Custom kernel crdroid
Then gapps of RR 5.8.3
Batteryfix
Sensor fix
YouTube lag fix
And when I rebooted it got stuck at welcome screen .....guide me lil bit is m doing something wrong
Sanjeevyadav said:
What would be the appropriate steps to install this ROM
I flashed
ROM
Custom kernel crdroid
Then gapps of RR 5.8.3
Batteryfix
Sensor fix
YouTube lag fix
And when I rebooted it got stuck at welcome screen .....guide me lil bit is m doing something wrong
Click to expand...
Click to collapse
try this
flash rom and mods first then reboot after you setup your phone
then reboot and flash G-apps
ChakibDEV said:
You flashed the custom kernel, didn't you?
Click to expand...
Click to collapse
Yes
lilcat1 said:
Yes
Click to expand...
Click to collapse
Well, don't. It doesn't work, mine also gets stuck at boot animation when I flash it
ChakibDEV said:
Well, don't. It doesn't work, mine also gets stuck at boot animation when I flash it
Click to expand...
Click to collapse
Any idea how to root the phone otherwise. I tried KingRoot but I guess it doesn't work on Android 5.1 and above...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Note
This device has different names in different countries: J2 Prime; J2 Ace; Grand Prime Plus.
Supported Models:
SM-G532G
SM-G532F
SM-G532M
SM-G532MT
above variant with /DS is also supported (ex. SM-G532G/DS)
If you have 2 SIM cards, set both of them to 2G, then your desired one to LTE or 3G, then select a SIM card in the Settings for Cellular data for mobile data.
This phone only supports LTE + 2G configuration.
Working
Boot
RIL (Calls, SMS, Data)
Wi-Fi, Bluetooth, Hotspot.
Sensors. (Prox, Accelerometer)
Audio, Video, Media.
ADB, MTP.
Brightness.
Camera (Front, Rear, Flashlight), but NOT Video.
LiveDisplay.
GPS
FM Radio
Signature Proofing for MicroG.
Not Working / Bug
Video Recording. Footej Camera works (somehow!)
3.5" Headphone not work (it detects Headphone, but still plays audio on speaker. Bluetooth Headphone works)
VoLTE. Literally no Samsung phone has VoLTE working on AOSP ROM...
Encryption
Terrible battery. REALLY TERRIBLE.
Lag when playing 720p60 or 1080p (or higher) videos. Software Encoding can only do so much.
Phone very rarely just freezes. Just force restart by quickly taking out battery and reinsert.
(bug) If you have 2 active SIM cards, you have to configure manually to:
Disable Cellular data for at least 1 SIM (Settings > Data Usage).
Set at least 1 SIM's preferred network to 2G (Settings > SIM cards > SIM x Settings).
Select 1 SIM card for mobile data (Settings > SIM cards > Cellular data)
If you find any unmentioned bugs, mention me. Any logs of those bugs are appreciated; but mentioning it with reproduction should suffice.
Issues should be posted:
Here.
In my device tree repo on GitHub, under Issue tab (<- yes, that direct link is clickable).
In the "Galaxy J2 Prime/Grand Prime+" community on Telegram.
Download
ROM: https://github.com/almondnguyen/and...age-14.1-20230623-UNOFFICIAL-grandppltedx.zip
Google Apps (optional, provided by BitGApps): https://github.com/BiTGApps/BiTGApps-Release/releases/download/v2.2/BiTGApps-arm-7.1.2-v2.2-CORE.zip
Magisk for Root (optional): https://github.com/topjohnwu/Magisk/releases/
Installation
Install TWRP (Here be TWRP).
Download the files mentioned above to somewhere that is NOT internal storage.
Reboot to TWRP.
Format Data and System.
Install ROM.
Optionally install GApps and/or Root (use Magisk).
Reboot and Enjoy!
If have 2 SIMs, be noted of the dual-SIM bug.
Credit
The dad of J2 Prime development, SubZero.
The MVP of J2 Prime dev & community, Nguyen Long. Also great at squashing bugs.
TBM_13 for tackling lots of bugs. Tysm!
melekpro for making working port ROMs (and partially fixing this ROM too)
Skyrimus for Wileyfox Spark(+) tree, whose blobs replaced some of this device's outdated / not working ones.
jmfp_bmx (and the array of Sony MTK Devs) for helping with Camera, xlog and some stuff
[email protected] for LiveDisplay fix
Someone that leaked MTK BSP O which I used extensively to fix some libs misbehaving lol.
The community over at Telegram, particularly the Bear, Chickentai, Grand Taco, Duck and D4BL.
Thanks the guys over 4pda too.
All the ones behind build guides and bug fixes which I didn't record ;-; .
Are you missing here? PM me!
Source
Kernel: https://github.com/almondnguyen/android_kernel_samsung_grandppltedx/tree/lineage-experimental
Device: https://github.com/almondnguyen/android_device_samsung_grandppltedx/tree/cm-14.1
Vendor: https://github.com/almondnguyen/android_vendor_samsung_grandppltedx/tree/cm-14.1
XDA:DevDB Information
LineageOS, ROM for the Samsung Galaxy J2 Prime/J2 Ace/Grand Prime Plus
Contributors
Prove N.
ROM OS Version: LineageOS 14.1
ROM Kernel: Linux 3.18.x
ROM Firmware Required: TWRP for J2P
Based On: Android 7.1.2, Nougat
Version Information
Status: Beta
Created 2019-07-07
Last Updated 2023-05-25
OTA update for the latest release should be out for everyone on LOS14 builds newer than 2020-12-31 !~
[ 2023-06-23 | HOTFIX 2 ]
Fixed Mobile Data not working on single-SIM devices
[ HOTFIX ]
Fixed BACK button not working.
[ 2023-05-25 ]
Fixed video playback (up to 720p30 and lower).
Fixed offline charging animation (it worked before, just no animation).
Fixed Wi-Fi hotspot.
Removed defaulted software nav-bar. The option will now be provided on first-boot and in Settings -> Buttons.
SIM signals now come up earlier on boot.
Overall optimization to performance and size.
Unified Kernel for N/O/P.
Fixed GPS and FM Radio (dunno when, dunno why, dunno how, someone just pointed it out and I tested and it just worked, LOL)
Older changelogs:
[Feb 16 22] (20220216) (Emergency hotfix):
REALLY disable persistent logcat. Are you kidding AOSP??
#logd.logpersistd.enable=true
Ignore RSSNR. This fixes LTE signal instability, though it doesn't necessary fix terrible signal strength on both 3G and 4G.
Add missing OMX symbol, which fixes local video playback it didn't, MtkOmxVencEncod crashes.
[Feb 13 22] (20220213):
Fix SnapCamera crashing after taking 1 pic.
Fix wakelock tracker (no more spam in data/system/dropbox).
Fix mobiledata for SIM 2.
[Feb 10 22] (20220210):
Signature Spoofing for MicroG.
Manually giving permission to MicroG is required.
Fix LiveDisplay.
[Feb 03 22] (20220203) (Hotfix):
Clean build. (remove leftover garbage)
Turn off persistent logcat for release build. (it eats a TON of storage)
[Feb 02 22] (20220202)
Fixed RIL (YAY!).
Fixed log spamming from mtk_agpsd and AudioParamParser (save some battery).
Fixed flashing red border from the previous build (due to it being eng build).
Kernel: backport MMAP_RND_BITS and MMAP_RND_COMPAT_BITS for futureproofing and some stuff that needs randomness.
Fixed 1080p and 720p60 playback lags. (using stock lib/shared objects instead of ones from another device)
Need (really) good connection regardless.
Update: still lag sometimes.
[Jul 19 21] (20210719)
Fixed HW recent key.
Fixed random crash. (doesn't appear to happen on my end)
Fixed SD Card for 3rd-party apps.
Kernel 3.18.53, some tiny improvement.
F2FS support.
NOTE: OTA will not be available for this release. It will be resumed when this hits beta.
[Nov 25 20]
July 5 2020 Security Patch
Allow RIL to work (with catches)
Fix Camera
Add partial doze (It might not work well yet, 30% overnight, no curves)
Fix stability (prevent phone freezing because of log spams)
[Dec 1 19]
November Security Patch
Cosmetic stuffs
[Sep 25]
Truly fix Video Playback
MTP [Internal Storage only, SD Card will not show up]
Baseband + IMEI for SIM 1
Some smaller bugs fled away.
[*] [Jul 19]
Included Wi-Fi/BT Patch in final ROM
Unintentionally fixed Orientation/Proximity/Accelerometer (lol?)
Fixed Audio / Media (In a nutshell, YouTube works )
[*] [Jul 10]
Fix Wi-Fi
Removed boot hacks
[*] [Jul 7]
Initial Release
[/LIST]
reserve 2
Wow. I hope a finished ROM will be come on someday soon :3
Nice ?
Nice work! I would like to help a little bit more but it's my main phone and i never fixed anything in a device tree, just compiled haha
Hope
Sent from my Samsung SM-G532M using XDA Labs
good work!but still a long way to go after 2 year!
Are sensors working? (proximity, accelerometer, Samsung orientation sensor)
TBM 13 said:
Are sensors working? (proximity, accelerometer, Samsung orientation sensor)
Click to expand...
Click to collapse
The orientation is certainly not working yet as it uses some of MM samsung libraries. (In fact, Wi-Fi/BT is too, have to use patch from Doogee X5Pro)
Haven't tried Proximity/Accelerometer yet.
E: pretty sure I am going to fix main stuffs first like audio, media, MTP, Lock Screen Security (because I removed keystore lib to boot this phone, can use porridge's too) and the hardest which is RIL/Telephony as this phone is the first of a kind.
little push. (just want to get some dev in works because summer is coming near to ending here :< )
Keep up the good work my guy!
Add to working/not working list:
Camera
Internal microphone
Radio
Headphone
Btw, is Bluetooth working 100% fine? Because in the XenonHD ROM of Melekpro i wasn't able to send a picture from another phone to the J2 Prime.
TBM 13 said:
Add to working/not working list:
Camera
Internal microphone
Radio
Headphone
Btw, is Bluetooth working 100% fine? Because in the XenonHD ROM of Melekpro i wasn't able to send a picture from another phone to the J2 Prime.
Click to expand...
Click to collapse
i just connect to my laptop lol. Haven't tried sending files~
btw, headphones not working? Kinda weird when audio is *mostly working (again, haven't tried)
Prove N. said:
btw, headphones not working? Kinda weird when audio is *mostly working (again, haven't tried)
Click to expand...
Click to collapse
Idk, i wasn't able to try your LOS 14.1 because it's my main phone.
TBM 13 said:
Idk, i wasn't able to try your LOS 14.1 because it's my main phone.
Click to expand...
Click to collapse
Headphone is working. But it is finicky / unstable because the main audio also is.
Bluetooth transfer works both ways (check images)
e1: audio over bluetooth works too~
-
oh, J2 Prime is my only phone lol. An used S3 is coming, so I can fully working on this device (except, Its about time to school here..... )
Prove N. said:
oh, J2 Prime is my only phone lol. An used S3 is coming, so I can fully working on this device (except, Its about time to school here..... )
Click to expand...
Click to collapse
Do you make TWRP backups or you flash the ROM, install all the apps and configure everything again?
TBM 13 said:
Do you make TWRP backups or you flash the ROM, install all the apps and configure everything again?
Click to expand...
Click to collapse
the latter one. I have my laptop for everything already, but I can't live without YouTube and updated Samsung Internet lol (is currently the only one with true Dark Mode, and I'm more of a night owl)
To be fair, I'm still using a 2 GB SD card I bought 7 years ago, so (except EFS,) TWRP backups are no go to me ~
TBM 13 said:
Add to working/not working list:
Camera
Internal microphone
Radio
Headphone
Btw, is Bluetooth working 100% fine? Because in the XenonHD ROM of Melekpro i wasn't able to send a picture from another phone to the J2 Prime.
Click to expand...
Click to collapse
I forgot to add SD Card.
TBM 13 said:
I forgot to add SD Card.
Click to expand...
Click to collapse
I'm still using it normally though. But melek reported that too and I'm working on that.
Still stuck at why RIL/telephony/baseband/IMEI does not behave (I cannot find any logs related to those, except nvram (nvdata?) not mounted/read correctly)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
* Your warranty is now void.
*
/*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Introduction
LineageOS is a free, community built, aftermarket firmware distribution of Android 12 (S), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Bugs
What's working:
Boot
RIL
Camera
Fingerprint Sensor
WiFi
Bluetooth
Audio
Video Playback
NFC
Sensors
Touch
Flash
Moto gestures
Network monitor
Secure boot
What's not working:
Encryption
SELinux
Vendor mismatch (warning on each boot) removed, not fixedr
You tell me.
What's untested:
GNSS GPS
Audio via USB C
Hotspot (2.4Ghz / 5Ghz)
Moto Mods (likely broken)
SD card
External storage
VoLTE
Installation instructions
Upgrade to Stock Oreo Firmware if not done already!
Download the zip(s).
Install a compatible Recovery
Perform a NANDroid backup of your current ROM (Optional)
Wipe data & cache partitions and FORMAT DATA from TWRP of your device (required when coming from stock!).
Flash ROM.
Optional: Install the Google Apps addon package.
Optional: Install Magisk for Root.
Downloads
Gapps : MindTheGapps
Rom : Download
Sources
device tree: github
kernel tree: github
vendor tree: github
local manifest: github
Big Thanks
LineageOS Team.
Tarkzim and raul-16 for their reference trees and xda template.
Adi20_01, TheVancedGamer, Astridxx and nift4 on tg for helping me out.
8890q team for their amazing network monitor patch
@qwek and @blinkerss for using and testing the rom
Wanna support me?
Join the support chat and share your experience and tips!
Code:
Changelog:
18th February:
February security patch
add custom dns options
add options to set renderer
double tap to sleep
drop misc debugging
27th January:
January security patch
Add signature spoofing
Fix fingerprint
Bork encryption
Fix misc kernel vulnerabilities
18th December:
CLEAN FLASH MANDATORY
NEW RECOVERY FOR DECRYPTION NEEDED
December security patch
fix encryption
uprev keymaster
exclude audiofx
update gps configs
04th December:
enable secure boot
disable rounded corners
fix buggy lockscreen
12th October:
October security patch
remove warning on each bootup
fix network monitor
add updater strings
some sepolicy changes (not enforcing, but a step in the right direction)
21st September:
initial userdebug build
enable zram
update media codecs
aggressive write caching
initial release
this is my logcat sir. just wanna report again. it getting hot randomly when i doesnt use it.
Thx for reporting your issue, but according to your logs it is chrome/chromium that keeps crashing...
Nvm, there is a lot going on, which I dont understand...
*but gapps are in there a lot.
@SirRGB i use mindthegapps 🫠🫠 i disable many builtin apps. i change jelly browser to chrome, aosp camera i change with google camera from store. nvm? do you mean my network? if yes, my network provider going crazy yesterday, i lose many many times lte network. as you mention that chrome going crash, i never get a notification my chrome force close or anything. but right, i fell little bit hotter after installed chrome. and last night griffin get hot when charging reach 80%. its weird. this is all happening after i dirty flashed 2nd build. well, i'll change the gapps with clean flash and i'll report again. thanks for helping me.
iam so sorry dissapoint you. but after i posted last comment. my network totally gone. really gone. even i searching it manualy. no one network showing up. nothing. so i decide to flash to stockrom via fastboot to see what happen with my. and surprise my network come after done.
update:
i can confirm that network problem on my griffin is not from LOS 19.1. i've tried on many custom rom such /e/, LOS 18.1, 17.1. When my network is gone. It cannot searching anymore. but, reboot system can solve the problem. IDK why, but i never faced this problem on custom rom without vendor e.g OMNIROM 9 or stockrom.
Ok, good to know. I didnt actively use it and just tested the basic functions...
I really hope you had a backup of efs/persist/modem since that could be your issue...
qwek said:
update:
i can confirm that network problem on my griffin is not from LOS 19.1. i've tried on many custom rom such /e/, LOS 18.1, 17.1. When my network is gone. It cannot searching anymore. but, reboot system can solve the problem. IDK why, but i never faced this problem on custom rom without vendor e.g OMNIROM 9 or stockrom.
Click to expand...
Click to collapse
my other moto z (bootloader locked with stock 8.0 rom) also have the similiar same problem like you: random and sudden signal missing, and restart to fix it, IDK but i think its some hardware issue for my moto z, because with my daily moto z (bootloader unlock, carbon rom 10) never have the missing signal problem, and i have try lots of custom rom
blinkerss said:
my other moto z (bootloader locked with stock 8.0 rom) also have the similiar same problem like you: random and sudden signal missing, and restart to fix it, IDK but i think its some hardware issue for my moto z, because with my daily moto z (bootloader unlock, carbon rom 10) never have the missing signal problem, and i have try lots of custom rom
Click to expand...
Click to collapse
what is your sim card bro? i use crazy axiata, when every 2.00am network always gone until 30 minutes. i think its radio band, but when i try to check, its only automatic and US.
SirRGB said:
Ok, good to know. I didnt actively use it and just tested the basic functions...
I really hope you had a backup of efs/persist/modem since that could be your issue...
Click to expand...
Click to collapse
i think so. first i flash fw with retail then flash customrom, then i change fw with EMEA APAC region and flash custom rom again, issue still there, even i change other custom rom.
qwek said:
what is your sim card bro? i use crazy axiata, when every 2.00am network always gone until 30 minutes. i think its radio band, but when i try to check, its only automatic and US.
Click to expand...
Click to collapse
I'm using telkomsel, also if I'm remember correctly, re-insert the sim card will fix this sudden random signal missing, the only thing that i havent test: using the 2nd simcard slot
update:
using more than one week. i change chrome with bromite and use nikgapps. idk but my network problem has gone. but im stick with 4g only now. no phone calls no problem i never use it. i know eta is not allowed. but i hope for the update. latest build deserve official status.
3.18 and below cant get official lineage 19/20/..., so that wont ever happen unless someone backports bpf.
I still dont know selinux and dont know if it is worth it to investigate...
Havent changed anything source wise, so rebuilding wouldnt fix anything. Might do another build with the new security patch once it is released.
Thx for reporting and using it
Feel free to report any issues and share logs.
SirRGB said:
3.18 and below cant get official lineage 19/20/..., so that wont ever happen unless someone backports bpf.
I still dont know selinux and dont know if it is worth it to investigate...
Havent changed anything source wise, so rebuilding wouldnt fix anything. Might do another build with the new security patch once it is released.
Thx for reporting and using it
Feel free to report any issues and share logs.
Click to expand...
Click to collapse
what about mokee? i think they are accept. i saw griffin still got update but no maintainer. honestly, i dont have any skill about coding or anything. just appreciate your amazing work. you very kind, still care to our device.
I think they mostly buildbot .i.e. they take the official lineage trees and build based on that. However I can go for arrow os community. In that case I dont have to worry about sepolicy for now and we all can enjoy monthly ota updates...
found a patch, that makes the network monitor work, will be included in the next build...
SirRGB said:
found a patch, that makes the network monitor work, will be included in the next build...
Click to expand...
Click to collapse
glad to know that. i saw many new commits. i think you prepare something bigger. alright, just waiting. and testing. iam ready for it.
qwek said:
glad to know that. i saw many new commits. i think you prepare something bigger. alright, just waiting. and testing. iam ready for it.
Click to expand...
Click to collapse
If you meant my device tree that was probably just my rebase i.e. I cleaned up the commit history a little.