Database Users

[HELP] galaxy s stuck at start up help!!!!

guys my galaxy s is stuck at the galaxy s gt-I9000 logo...
i flashed ICS onescomic rom and i dind't like it so i restored my nandroid backup i made earlier but it said md5 mismatch...
then i used this trick... http://forum.xda-developers.com/showthread.php?t=976453
downloaded the attached zip and read it...
got it to restore but the its stuck at the logo...
PLease HELLLPPPPP
my dad will kill me
also i got it into download mode but odin could not detect it....
UPDATE!!!: got into download mode and odin detected it now what do i do guys i have download I9000XXJVQ stock firmware...

clockwork mod
also clockwork mod recovery displays a lot of messages like E: not found..
E:/data not found... guys i really need your help[.... i doesn't recognize anything!!! i'm just 14 and i got the phone on Christmas and really don't want to make my dad fell bad

put phone into download mode (3 button combo) and reflash using pit and 3 file firmware like this one - you will find all files needed inside package
http://hotfile.com/dl/137485896/965...OXAJVT_MODEM_I9000XXJVT_ROOTED_stock.zip.html
or
http://hotfile.com/dl/137483384/7a0...OXXJV9_MODEM_I9000XXJVT_ROOTED_stock.zip.html

No need to worry about your phone my friend. You can't "destroy" your phone with flashing or get it to a non-working state. There is always a way to flash it with stock rom. Even if it's stuck or anything. Just take a look around here and you will find answers.

Please submit the end of the story, we need to know if you succeed... otherwise, we will have to suit your father as a killer

Je suis vraiment désolé de squatter ce topic mais il me reste encore 4 messages à poster
---------- Post added at 11:44 PM ---------- Previous post was at 11:44 PM ----------
plus que 3 messages vraiment désolé

Bro search on xda 10.2 darkays flash with odin 1.3 got same prob like u during ics update recovery cwm currpted after e errors then i flash my cell from odin easy wasy n no risk
Sent from my GT-I9000 using Tapatalk

azharkhan46 said:
Bro search on xda 10.2 darkays flash with odin 1.3
Click to expand...
Click to collapse
You can also take stock JVU from http://forum.xda-developers.com/showthread.php?t=1431596 if you want to go the safe way.
As far as i know, you have to repartition SD via ODIN when going back from ICS to GB. According .pit-file is included in JVU download.
Detailed guide can be found here: http://www.theandroidsoul.com/xxjvu/
after that you should be able to restore your nandroid backup (make sure not to wipe your internal SD by hardreset or sth).

Downgrade P708g from JB to ICS?

So i recently learned the L7 finally got the JB update. I decided to try it out, but i didn't like it overall.
So i have been trying to downgrade it, but no luck. I have been trying to use cmahendra's guide (http://forum.xda-developers.com/showthread.php?t=2085344), but this is meant for L9, and it keeps getting stuck on 4%, despite reinstalling drivers and following the trouble shooting on the guide.
Is there a way to downgrade to ICS, another guide maybe?
Thanks in advance

Jstag said:
So i recently learned the L7 finally got the JB update. I decided to try it out, but i didn't like it overall.
So i have been trying to downgrade it, but no luck. I have been trying to use cmahendra's guide (http://forum.xda-developers.com/showthread.php?t=2085344), but this is meant for L9, and it keeps getting stuck on 4%, despite reinstalling drivers and following the trouble shooting on the guide.
Is there a way to downgrade to ICS, another guide maybe?
Thanks in advance
Click to expand...
Click to collapse
I did it with the same guide and I had the same problem while downgrading (Lparam 1002 Error on 4%).
Check out my solution HERE
If you are afraid of doing changes at the MIDDLE of the operation, wait for it to get stuck, tell you to restart and before restarting it do the same changes i am proposing.
Cheers,
Moul

Solution
Jstag said:
So i recently learned the L7 finally got the JB update. I decided to try it out, but i didn't like it overall.
So i have been trying to downgrade it, but no luck. I have been trying to use cmahendra's guide (http://forum.xda-developers.com/showthread.php?t=2085344), but this is meant for L9, and it keeps getting stuck on 4%, despite reinstalling drivers and following the trouble shooting on the guide.
Is there a way to downgrade to ICS, another guide maybe?
Thanks in advance
Click to expand...
Click to collapse
Here is the solution !!!...
http://www.taringa.net/posts/celula...-Jelly-Bean-a-ICS-LG-L7-P700---705---708.html

pemon said:
Here is the solution !!!...
http://www.taringa.net/posts/celula...-Jelly-Bean-a-ICS-LG-L7-P700---705---708.html
Click to expand...
Click to collapse
That's what he has been doing .... LG mobile update tool is using KDZ-Updater.exe to do this job. You should check on Update tool's folder. There you'll find KDZ Updater I've been doing that also, correctly doing the same steps as EVERY guide online about KDZ updater, but still had the same issue.
It seems though that LG has some issues on downgrading firmwares, and I posted my solution to this problem.
P.S.(For JStag) Be sure you have :
1. Installed drivers correctly
2. Disable LG Modem driver in Device Manager
3. Have USB debugging on IF you are doing this with phone turned-on. If not, better if you put battery off and enter Emergency Download Mode before starting it.
Cheers,
Moul

OK
moulwxtos said:
That's what he has been doing .... LG mobile update tool is using KDZ-Updater.exe to do this job. You should check on Update tool's folder. There you'll find KDZ Updater I've been doing that also, correctly doing the same steps as EVERY guide online about KDZ updater, but still had the same issue.
It seems though that LG has some issues on downgrading firmwares, and I posted my solution to this problem.
P.S.(For JStag) Be sure you have :
1. Installed drivers correctly
2. Disable LG Modem driver in Device Manager
3. Have USB debugging on IF you are doing this with phone turned-on. If not, better if you put battery off and enter Emergency Download Mode before starting it.
Cheers,
Moul
Click to expand...
Click to collapse
Well, the important thing here is the special for the downgrade KDZ compiled by Homer ... As you mention if you are flashing a regular KDZ throws errors ...
===========
ESPAÑOL
===========
Pues aquí lo importante es el KDZ especial para el downgrade compilado por Homero... Como tu mencionas si flasheas con un KDZ normal arroja errores...

sm G800f rooting guide :)

hey everyone figured id write up a quick little guide on rooting your s5 mini model SM-g800f on android 4.4.2
lets crack on and I hope it helps you out
this is my first guide so feedback is greatly appreciated
Things you are going to need
before you begin you will need a few things
1. Your device ( for this guide I am focusing on the sm-g800f in particular)
2. a USB cable and access to a pc
3. files from this site https://autoroot.chainfire.eu/ (credit to : chainfire)
4. Samsung USB drivers (i recommend Kies for this)
Device Prep
ok so you have all that you need lets crack on
firstly you will need to download the files from the link above and extract the folder to your desktop
now on your device you need to put it into download mode after plugging it in
to do this simply plug your device into the USB port on your PC and turn it off
then hold volume down , home and power.
if done right you will see a warning screen just press volume up to confirm you know what you are doing
The Root
once your device is connected and in download mode (see above) you are ready to roll
simply right click odin and run as administrator you should see the box in the top right of Odin is blue and say Com 0 connected or similar.
check the box next to pda and click the PDA button.
from here select the auto root file and click start
that's all there is to it
let it work its magic and when your device reboots it should say updating android if you haven't rooted before just relax this is normal and it is simply installing superuser to your device
Post rooting tips&apps
so you are rooted eh?
well done the hard part is over from here i personally always do the following
tap on superSU and you will be prompted to disable Knox security ( Knox limits what you can do once rooted disabling it makes your life easier)
i also usually install x posed and busy box as well as lucky patcher
if this is too much to read I've made a quick video guide too this is me doing the entire rooting process from start to end and worth a look of anything stumps you
https://www.youtube.com/watch?v=jcggfrq-WzE

Will I lose the warranty?

Yes
Gesendet von meinem SM-G800F mit Tapatalk

there is a new G800FXXU1AOG2
will the root work on it?

Yes it works on AOG2 too.

Is it possible to select invisible rooting? In some of the Cyanogemod OSs you can toggle between visible/invisible rooting.
Reason being if it's visibly rooted, then I am not allowed to use it on the corporate email service (detected by Airwatch).

Worked perfectly for me, thank you

WIll this work on the brand new 5.1.1 ?

this worked om my aog2, thanks for the post

What Android version did u have installed?

firmware upgrade encountered an issue. please select recovery mode in kies & try agai
firmware upgrade encountered an issue. please select recovery mode in kies & try again . j'ai eu ce message apres avoir fait par odin ,comment réparer cela , kies ne reconnais pas le s5 !
avez vous une soluce ,grand merci a vous :confus::confus:
S5 SMG800F

Morthawt said:
WIll this work on the brand new 5.1.1 ?
Click to expand...
Click to collapse
Same question here.

Stock rom. Not tried it with that new one

tonemgub1 said:
Same question here.
Click to expand...
Click to collapse
did you find out if this works on 5.1.1?

No, on the website https://autoroot.chainfire.eu/ only files for 4.4.2 are listed and I finally got my device rooted with the app Kingroot. In a different thread some user announced to write an instruction for 5.1.1 g800f bit still nothing has happened.

H!
have a g800fxxu1bpc3 on 5.11 Can i use root method form post no.1 with cf autoroot ?

Just tried it today on my stock 5.1.1 S5 mini (G800FXXU1BPC3) and it worked like a charm with the latest files from ChainFire.
Thanks a lot for the tutorial.

jimmay12345 said:
tap on superSU and you will be prompted to disable Knox security ( Knox limits what you can do once rooted disabling it makes your life easier)
Click to expand...
Click to collapse
Hi,
Nice guide. My G800F is now rooted. Thanks much!
However, when I go into SuperSU it doesn't prompt me about Knox. I wish I could disable it from there.
thanks!

man i have a g800f with 5.1.1 can i root it with that procedure or not?

Will it wipe my Samsung S5 mini when using this method? Or will it just root and everything continues to work as installed?

LGUP Restore from dumps?

Is there any way we can restore our phone using the files dumped by LGUP?
Right now I am considering perhaps flashing from fastboot every single file that was present but I am not sure if that could create an issue.
I believe it might also be possible to create a zip file using all the dump to create some kind of image that could be restore using TWRP?

i95swervin said:
You can use the partitions dumped from lg up to create a flashable twrp zip.
Click to expand...
Click to collapse
In order to do that, I can just put all the files into the zip (trimming the extra _COMYY at the end) and I can take the INF folder from another twrp zip?
Well actually I instead of all the files, maybe I should only overwrite the files with the same name since I believe the INF contain information about the other files.
Sorry if that sounds simple, most guides are for advanced people creating custom roms who knows what they are doing.

Duplicate Post

Does it sound like a good idea to flash all the partitions using flashboot?
flashboot flash aboot aboot_COMYY
flashboot flash abootbak abootbak_COMYY
flashboot flash apdp apdp_COMYY
etc...
Everything seems to indicate that it should works considering all the major components can be flashed that way.

Yes, you can flash with fastboot, however, you want to be VERY careful since there is no integrity check. So, you can end up flashing a corrupt boot chain if you have a noisy USB bus, and you phone is toast.
You should really consider making a flashable zip.
-- Brian
---------- Post added at 12:17 PM ---------- Previous post was at 12:17 PM ----------
Yes, you can flash with fastboot, however, you want to be VERY careful since there is no integrity check. So, you can end up flashing a corrupt boot chain if you have a noisy USB bus, and you phone is toast.
You should really consider making a flashable zip.
-- Brian

runningnak3d said:
Yes, you can flash with fastboot, however, you want to be VERY careful since there is no integrity check. So, you can end up flashing a corrupt boot chain if you have a noisy USB bus, and you phone is toast.
You should really consider making a flashable zip.
-- Brian
---------- Post added at 12:17 PM ---------- Previous post was at 12:17 PM ----------
Yes, you can flash with fastboot, however, you want to be VERY careful since there is no integrity check. So, you can end up flashing a corrupt boot chain if you have a noisy USB bus, and you phone is toast.
You should really consider making a flashable zip.
-- Brian
Click to expand...
Click to collapse
It did work for everything except the system partition. I believe this is because the phone only has 4GB of memory and the uncompressed file is over 5GB.
I ended up flashing the system partition using LGUP. I would have loved to say that everything is now fine for future members seeking to recover their device however I believe I messed up by using the system of the H915 (I thought I would try before flashing a H910 system since the H910 has much fewer options). The phone works (except signal) but I can't even flash anymore since the model of the phone appear as unknown within LGUP.... I can't edit the build.prop file either since it is protected. The troubles never ends.

Us the patched LG UP for cross flashing.

runningnak3d said:
Us the patched LG UP for cross flashing.
Click to expand...
Click to collapse
I did, it was working perfectly fine before. I could dump or flash, until I decided to only flash the system partition instead of all of them.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I thinks my only options now are to find a way to get the phone recognized differently or to get the dll to bypass that check.

I have never gotten into a situation where the model was unknown, and I have had a version of laf from one model (H915), the engineering aboot which is identified as a US996, and yet a different system partition (VS995) all on an H910.
Not sure what you did if your are using the LG UP that was patched by smitel.
-- Brian

runningnak3d said:
I have never gotten into a situation where the model was unknown, and I have had a version of laf from one model (H915), the engineering aboot which is identified as a US996, and yet a different system partition (VS995) all on an H910.
Not sure what you did if your are using the LG UP that was patched by smitel.
-- Brian
Click to expand...
Click to collapse
Ok.... thats weird....
I tried a lots of stuff since then, mostly attempting to flash using LG Flash Tool using the following guide : https://forum.xda-developers.com/lg-g5/how-to/bring-lg-g5-to-life-download-mode-lgup-t3565508
Nothing worked, the kdz / dz kept failing even when they shouldn't.... My phone then wouldn't boot and kept displaying the (Factory Reset Status 2 / blue screen). At this point I thought it was bricked.... I couldn't do anything with the download mode and couldn't do anything with the phone either.
I thinks I tried one last time to upload the H910 build and it failed. I gave up and left the phone alone, still connected. Later, I came back and to my surprise the phone was booting up, better yet, it had signal which I never had with any rom / firmware, root or not.
Basically, I thinks my first attempt to restore entierly my phone except the system (I kept the H915) did work and solved all my problems. I am now able to use my phone with Telus (one of the canadian carrier) My original plan was to revert completely to the stock build I had and try to see if Rogers would give me signal since they apparently use the same bands as AT&T. But now that isn't necessary anymore.
Damn this is great, I can't even count the amount of time I got depressed by all that troubleshooting. Twice that I thought I had completely bricked my device. It is tougher than expected!
Really happy, plus the LG v20 is probably one of the best phone I have ever seen, it basically has all the features that are practically non-existent on the newer models.
Now I will just need to try to backup my current settings in one way or another, so that I never have to have any problems anymore. Especially if I plan on updating the device now that I receive updates.

Aknnor said:
I did, it was working perfectly fine before. I could dump or flash, until I decided to only flash the system partition instead of all of them.
Click to expand...
Click to collapse
It is sucessfully cross flashing system partition only? Thx U.

Can someone explain how to restore by backup using LGUP if I do not have TWRP access?
Right now my V20_H915 is stuck in a bootloop after a failed attempt to root. I have all my backup files by I don't know how to restore them onto the phone. I thought that when I do the backup it will just create a KDZ or BIN that I can flash with LGUP but that doesn't seem to be the case.

Hi all, I got an working AT&T G6 (H87110b). I want to try Convert/Upgrade the AT&T G6 to H873 OR US997 With VoLTE as guided in here. But there is a warning at the beginning as usual
Lets get those warnings out of the way! Warning Do this at your OWN RISK! There is NO WAY BACK to AT&T firmware at the moment and might never be. Only loss is you'll loose VoLTE and WiFi calling (If using the H873 Firmware)
Click to expand...
Click to collapse
I was thinking that trying this method to upgrade my G6 after making a full system backup using LG UP and make a KDZ file. If I can do that, I will able to come back in case if any bad thing happens after convert/upgrade.
Could anyone please guide me?

I .. i have Dump file from my LG device using lgup tool.... now how can i reflash these dump files again

naeembabakheil said:
I .. i have Dump file from my LG device using lgup tool.... now how can i reflash these dump files again
Click to expand...
Click to collapse
man, could you find the solution? I desperately need this now

master72 said:
man, could you find the solution? I desperately need this now
Click to expand...
Click to collapse
I was in the same boat. Since I just wanted some things, like contacts, and google authenticator DB I just used a tool that can read linux file system on windows. Those files are raw EFS4 partitions. Just using free 'Diskinternals Linux Reader'. You can rename the dumped partitions with an extension that the app wants, but I just hit '*' in the open box so it shows all files and opened them without renaming. Then saved the DBs out of it. They are readable with SQLite Browser.
But later i'm going to try what they said and use fastboot to flash a partition back to my phone. It was bricked good, but using LGUP on my H910 I was able to flash it with a canadian stock ROM and now it's an H915. Already ordered a new phone, mostly wanted my data, but to ease accessing it I will attempt to restore my data to it.

DaVinniCode said:
Yo estaba en el mismo barco. Como solo quería algunas cosas, como contactos y la base de datos del autenticador de Google, solo usé una herramienta que puede leer el sistema de archivos de Linux en Windows. Esos archivos son particiones EFS4 sin procesar. Simplemente usando el 'Diskinternals Linux Reader' gratuito. Puede cambiar el nombre de las particiones volcadas con una extensión que la aplicación quiera, pero solo presioné '*' en el cuadro abierto para que muestre todos los archivos y los abriera sin cambiar el nombre. Luego guardó los DB. Son legibles con SQLite Browser.
Pero luego intentaré lo que dijeron y usaré fastboot para actualizar una partición a mi teléfono. Estaba bien bloqueado, pero al usar LGUP en mi H910 pude flashearlo con una ROM de stock canadiense y ahora es un H915. Ya pedí un nuevo teléfono, en su mayoría quería mis datos, pero para facilitar el acceso intentaré restaurar mis datos en él.
Click to expand...
Click to collapse
No entiendo amigo, me puedes explicar mas detalladamente? Tengo un modem que volcado pero no se como instalarlo

doordash knox customized tablet unable to remove

so i bought this Tab E (SM-T377V) off a site , and it was owned by a resturant that no longer used the service Doordash. it was locked down with FRP lock when i first got it i was able to by pass the FRP and i can flash any ROM to it now but it always loads the KNOX customization no matter what ROM i try and load .. now in 5.1.1 i can get root but when i try and remove the KNOX it freezes and wont boot. right now i can let knox load and use it normally for the most part just has the doordash logo wallpaper which is set with the KNOX. i would like to try and get rid of this KNOX customization , i assume there is a hidden partition or something like that makes it point too the KNOX loading no matter what i flash it with? in ODIN i've tried to do the erase nand and everything else i can but still no luck any help or advise would be useful, on another note i have the COMBONATION FILE ROM and when i load that i don't get the KNOX thing but its just alot of testing stuff is there anyway i can use that to remove this KNOX??? again any advise or pointers would be helpful. right now like i said i got it usable as a tablet just with annoying with the doordash customizations ..

Any luck?

cernorama said:
so i bought this Tab E (SM-T377V) off a site , and it was owned by a resturant that no longer used the service Doordash. it was locked down with FRP lock when i first got it i was able to by pass the FRP and i can flash any ROM to it now but it always loads the KNOX customization no matter what ROM i try and load .. now in 5.1.1 i can get root but when i try and remove the KNOX it freezes and wont boot. right now i can let knox load and use it normally for the most part just has the doordash logo wallpaper which is set with the KNOX. i would like to try and get rid of this KNOX customization , i assume there is a hidden partition or something like that makes it point too the KNOX loading no matter what i flash it with? in ODIN i've tried to do the erase nand and everything else i can but still no luck any help or advise would be useful, on another note i have the COMBONATION FILE ROM and when i load that i don't get the KNOX thing but its just alot of testing stuff is there anyway i can use that to remove this KNOX??? again any advise or pointers would be helpful. right now like i said i got it usable as a tablet just with annoying with the doordash customizations ..
Click to expand...
Click to collapse
Just factory reset with twrp and format the data partition.
Ensure oem unlock is enabled first.

cernorama said:
so i bought this Tab E (SM-T377V) off a site , and it was owned by a resturant that no longer used the service Doordash. it was locked down with FRP lock when i first got it i was able to by pass the FRP and i can flash any ROM to it now but it always loads the KNOX customization no matter what ROM i try and load .. now in 5.1.1 i can get root but when i try and remove the KNOX it freezes and wont boot. right now i can let knox load and use it normally for the most part just has the doordash logo wallpaper which is set with the KNOX. i would like to try and get rid of this KNOX customization , i assume there is a hidden partition or something like that makes it point too the KNOX loading no matter what i flash it with? in ODIN i've tried to do the erase nand and everything else i can but still no luck any help or advise would be useful, on another note i have the COMBONATION FILE ROM and when i load that i don't get the KNOX thing but its just alot of testing stuff is there anyway i can use that to remove this KNOX??? again any advise or pointers would be helpful. right now like i said i got it usable as a tablet just with annoying with the doordash customizations ..
Click to expand...
Click to collapse
Hola gracias a Google Translate eh podido entender tu pregunta.
Veras, yo tengo el mismo problema,.
Ya casi tengo lista la tablet, pero aun no puedo activar la WiFi del dispositivo.
Yo usé la Samsung tools + Hack file.
Ya puedo usar la tablet pero no me permite navegar por internet porque el WiFi esta bloqueado
Si tienes alguna idea me la comparte y yo te doy lo que tengo de investigacion.
Saludos

IDK if you figured this one out but here is how I did it:
>Extract PIT file from the BL tar.md5 of your stock firmware
>Nand erase all with Odin 3.07 with autoreboot UNCHECKED
>Set PIT file and check repartition, reboot download mode
>Flash stock firmware
If anyone needs links PM me. I have a Sammobile account.

hi just flash this combination and activ usb debug and oem unlock make hard reset
COMBINATION_VZW_FA51_T377VVRU1AQD1_VZWFAC_CL6507601_QB13278124_REV00_user_mid_noship
flash this rom ALL_VZW_T377VVRU1AOL7_T377VVZW1AOL7_5.1.1_USA
thats all

Lol just go to safe mode and then put the wrong password in 30 times

help!
Having trouble doing this. Would you be able to help me with the process? Got a practically new tablet preloaded with Doordash. Thank-you!

2 more tablets , reset and cleared
i got 2 more doordash tablets SM-T377v , i was able to odin flash the combonation file .. unlock oem and usb debugger in developers options, and then flash the latest 7.1 rom , both work like a charm now , from what i have read the OEM unlock disables the KNOX .

Where can I find this combination file?

HI, im having a very similar issue with my device i just got. Its a tab e (SM-T567V) i tried flashing a new rom and every time it connects to wifi Knox pops up and locks it out. What rom and steps should i be using to fix this? I have the ability to oem unlock and USB debug it. Thanks any info would be greatly appreciated

I have same tablet and same issue. How did you get it reset? Where can I find that combination file?

MarXilla said:
IDK if you figured this one out but here is how I did it:
>Extract PIT file from the BL tar.md5 of your stock firmware
>Nand erase all with Odin 3.07 with autoreboot UNCHECKED
>Set PIT file and check repartition, reboot download mode
>Flash stock firmware
If anyone needs links PM me. I have a Sammobile account.
Click to expand...
Click to collapse
Hey can I please get those links? I'm ready to conquer this damn thing... Lol

cernorama said:
2 more tablets , reset and cleared
i got 2 more doordash tablets SM-T377v , i was able to odin flash the combonation file .. unlock oem and usb debugger in developers options, and then flash the latest 7.1 rom , both work like a charm now , from what i have read the OEM unlock disables the KNOX .
Click to expand...
Click to collapse
Can you please tell me where that combination file is? And also how to own unlock...it's not in the settings

I am also having same issue with t387V, I was able to flash combination file and oem unlock; however when I flash the stock firmware with ODIN, the MDM (mobicontrol) is still present.
For above, you can try to find combination file here https://firmwarex.net/?s=t377v

neozengar said:
I am also having same issue with t387V, I was able to flash combination file and oem unlock; however when I flash the stock firmware with ODIN, the MDM (mobicontrol) is still present.
For above, you can try to find combination file here https://firmwarex.net/?s=t377v
Click to expand...
Click to collapse
I have the Samsung SM-T387v as well. Did you ever figure a fix for this?

8wrlobo said:
Lol just go to safe mode and then put the wrong password in 30 times
Click to expand...
Click to collapse
Unfortunately, that didn't work

MarXilla said:
IDK if you figured this one out but here is how I did it:
>Extract PIT file from the BL tar.md5 of your stock firmware
>Nand erase all with Odin 3.07 with autoreboot UNCHECKED
>Set PIT file and check repartition, reboot download mode
>Flash stock firmware
If anyone needs links PM me. I have a Sammobile account.
Click to expand...
Click to collapse
Hi, I'm having the same issue. Samsung Galaxy Tab A, SM-T387v.
I have no idea how to do what you just said. Can you or someone please explain so that I may perform the necessary actions to fix my tablet?

I have the T-378V also. You can get access to developer mode by interrupting Soti Mobicontrol during initial setup. You can do this by restarting in safe mode as soon as device setup has started following setting up your work device. Now, there are comments regarding several methods of proceeding: 1)Try to Nand erase all, flash pit from combo file ? and then flash stock fw? 2) Wait out the 7 days with sim inserted, wifi on and, in safe mode to unlock oem? What step proceeds at that point abd twrp? 3)There is a method involved of encrypting the device and incorrectly entering the password to factory reset, however without having encryption and oem unlock enabled this option hasn’t worked for me. 4) One of the fw I flashed with odin made an unlock symbol show up at the bottom of the android/samsung boot up logo I don’t know what the significance was or how to proceed.
If anyone figures something out please share it here.

MarXilla said:
IDK if you figured this one out but here is how I did it:
>Extract PIT file from the BL tar.md5 of your stock firmware
>Nand erase all with Odin 3.07 with autoreboot UNCHECKED
>Set PIT file and check repartition, reboot download mode
>Flash stock firmware
If anyone needs links PM me. I have a Sammobile account.
Click to expand...
Click to collapse
It didn't work for me.