Related
Ok so first off I was successful in rooting the phone, installing twrp rec., flashing loki files, and then flashing wicked rom with ktweaker tw kernel. I made a backup of the stock rooted rom before wicked was flashed. Then my troubles started when I wanted to go back to my stock backup. The rom booted but has serious issues like black screen with only status bar working and then eventually freezing. I also made a backup of a working wicked and tried restoring that but then I just get stuck in boot loop. Any help would be greatly appreciated.
what twrp version
did you wipe all before restoring
you could try to install Phils cwm recovery, folks say it works great and will restore twrp backups also
thesystem90 said:
Ok so first off I was successful in rooting the phone, installing twrp rec., flashing loki files, and then flashing wicked rom with ktweaker tw kernel. I made a backup of the stock rooted rom before wicked was flashed. Then my troubles started when I wanted to go back to my stock backup. The rom booted but has serious issues like black screen with only status bar working and then eventually freezing. I also made a backup of a working wicked and tried restoring that but then I just get stuck in boot loop. Any help would be greatly appreciated.
Click to expand...
Click to collapse
Follow full wipe procedures, have the same recovery you made the backup with, and try again.
rugmankc said:
what twrp version
did you wipe all before restoring
you could try to install Phils cwm recovery, folks say it works great and will restore twrp backups also
Click to expand...
Click to collapse
I flashed the stock firm. Soft brick averted. Did the same goo manager recovery method, but now i'm thinking of flashing that cwm as ppl have reported the same nandroid backup issues with twrp. My version is 2.5.0.2. I will keep trying to get twrp for a while with others users till i get sick of it (semi twrp fan). Any further advice would be cool. Oh and I did a factory twrp wipe the first time this problem occurred.
I wipe data caches and system before flashing. No more advice. Had newest TWRP hang on Team Win screen. Several manual reboots into recovery till it worked. Maybe I better do restore to see if it works.
Sent From My 32gb Samsung Galaxy S4 Running Tapatalk 4 Beta
Hello,
I've rooted my own note 3 and flashed Temaseks unofficial cm 12 rom. Everything works perfect so I decided to do the same thing for my father. It all went well, first I rooted his phone, then I flashed CWM and flashed cm 12 by temasek. The rom works fine but I forget to install the Gapps. So I tried to install Gapps but I got an error "Failure Status 6". I googled on that error and someone told it has to do something with CWM. I tried to flash a different version of CWM but now I can't reboot into recovery mode anymore. So I can't flash anything.
I flashed another version of CWM but this one also doesn't work. Whenever I try to boot the phone into recovery mode, the blue line shows up. Rebooting into recovery mode, but after a few secs, the phone just boots the normal way. Is there anyone that can help me to get CWM back to work? In the mean time I'll try to flash TWRP by Odin.
Thanks in advance!
So I flashed latest version of CWM: Buildversion; 6.13.0, CWM Base Version V6.0.4.7. I can reboot into recovery now but still can't install Google Apps due to failure status 6. On my own Phone I run a different version of CWM, but when I try to flash it, the phone won't boot into recovery mode anymore. It only boots into recovery when I flash this V6.0.4.7 . How can I get rid of this version and flash an older version of CWM?
You'll probably have to Odin back to stock and start over...
Morningstar said:
You'll probably have to Odin back to stock and start over...
Click to expand...
Click to collapse
You mean If there is no other way to get the Google Apps on the phone, I have to go back to stock. I did make a backup with CWM on the while it was running custom firmware. Now I have 4 files on my comuter, 3.tar and 1.md5 . If I recover them, I will still have this not working CWM version on my phone right? Isn't there a easier way to delete CWM, can I flash TWRP over CWM and see if it will install these Gapps?
Yeah, you should be able to flash TWRP over it. TWRP is much better anyway, in my opinion. Once you get the recovery issue sorted, I really wouldn't't recommend trying to flash just the gapps. It would probably work, but it's also quite likely to cause some weird issues. It's always best to flash gapps immediately after flashing a ROM, without leaving recovery.
I would flash TWRP, wipe everything but your internal SD, re-flash the ROM, flash the gapps, and everything should be cherry.
Edit: here is the link to download TWRP.
Morningstar said:
Yeah, you should be able to flash TWRP over it. TWRP is much better anyway, in my opinion. Once you get the recovery issue sorted, I really wouldn't't recommend trying to flash just the gapps. It would probably work, but it's also quite likely to cause some weird issues. It's always best to flash gapps immediately after flashing a ROM, without leaving recovery.
I would flash TWRP, wipe everything but your internal SD, re-flash the ROM, flash the gapps, and everything should be cherry.
Edit: here is the link to download TWRP.
Click to expand...
Click to collapse
I appreciate your effort, thank you. The recovery issue is solved. I flashed Chainfires Root script and that installed the stock recovery. However, when I tried to install and older CWM version I got back in the recovery reboot cycle. But once I installed the latest CWM it booted in recovery. So I flashed Chainfires Root once again and had the stock recovery back. From there on I tried to install TWRP but got the recovery boot cycle again. My phone is now running android 5.0.2 and I think that's the problem.... :S I'll try again to flash Chainfires Root script to get the stock recovery back. From there on I will try to flash the link you gave to me with Odin and hope that will fix it. Do you have any ideas on what I'm doing wrong?
Your version of TWRP works so far. It reboots into RecoveryMode. Now I'll wipe and try to install Temaseks Cm 12 followed by Gapps! Thanks so far!
Okay, it's solved. Can't thank you enough for you help. Bless you!!
No problem. Glad you got it figured out!
[emoji106]
My N10 with stock 5.1 previously had root with TWRP 2.8.6, but for some reason it recently lost root. In addition, it seems that TWRP has been corrupted because whenever I try to boot into recovery I get a dead bootloader with a red exclamation mart. After I flashed the most recent version of TWRP 3.0.0-1 using "fastboot flash recovery twrp-3.0.0-1-manta.img" (bootloader still unlocked), I still get a dead bootloader when booting into recovery.
Then I flashed back to TWRP 2.8.6, but the problem remains!
How to fix the problem? Thanks!
I hope you can go to bootloader mode... Revert to stock by flashing the factory images and then start over again
nitin.chobhe said:
I hope you can go to bootloader mode... Revert to stock by flashing the factory images and then start over again
Click to expand...
Click to collapse
Thanks!
Just flashed an even older version (2.8.5) of TWRP, and now suddenly it can boot into recovery without any problem. I have also gained root now after flashing SuperSU.
I was planning to flash the most recent version of TWRP (3.0.0-1), and then try out CM13, but for some reason my N10 with stock 5.1 does not like those newer versions of TWRP. Do you know why?
mj56gt said:
Thanks!
Just flashed an even older version (2.8.5) of TWRP, and now suddenly it can boot into recovery without any problem. I have also gained root now after flashing SuperSU.
I was planning to flash the most recent version of TWRP (3.0.0-1), and then try out CM13, but for some reason my N10 with stock 5.1 does not like those newer versions of TWRP. Do you know why?
Click to expand...
Click to collapse
No, I do not konw that. Are you flashing correct version of TWRP made for manta?
nitin.chobhe said:
No, I do not konw that. Are you flashing correct version of TWRP made for manta?
Click to expand...
Click to collapse
I downloaded all the three versions (2.8.5, 2.8.6, and 3.0.0-1) of TWRP I've flashed so far from here:
https://dl.twrp.me/manta/
This is weird. Is it because I didn't have root during the time I flashed 2.8.6 or 3.0.0-1? I thought that flashing TWRP would not require root.
Can I flash CM13 with TWRP 2.8.5? I'll definitely make a Nandroid backup before proceeding.
mj56gt said:
I downloaded all the three versions (2.8.5, 2.8.6, and 3.0.0-1) of TWRP I've flashed so far from here:
https://dl.twrp.me/manta/
This is weird. Is it because I didn't have root during the time I flashed 2.8.6 or 3.0.0-1? I thought that flashing TWRP would not require root.
Can I flash CM13 with TWRP 2.8.5? I'll definitely make a Nandroid backup before proceeding.
Click to expand...
Click to collapse
With nandroid, you are good to go.
Should be possible :fingers-crossed:
nitin.chobhe said:
With nandroid, you are good to go.
Should be possible :fingers-crossed:
Click to expand...
Click to collapse
I did factory reset in TWRP 3.0.0-1 and then flashed CM 13.0-20160309 on my N10 with the dynamic Gapps. Now I get this error Unfortunately Google Play Services Has Stopped. Is it because the default factory reset is not good enough or something else? If it needs a full wipe, what exactly should I wipe, system and data? And after a full wipe, do I need to reflash CM13 or just Gapps?
Thanks!
mj56gt said:
I did factory reset in TWRP 3.0.0-1 and then flashed CM 13.0-20160309 on my N10 with the dynamic Gapps. Now I get this error Unfortunately Google Play Services Has Stopped. Is it because the default factory reset is not good enough or something else? If it needs a full wipe, what exactly should I wipe, system and data? And after a full wipe, do I need to reflash CM13 or just Gapps?
Thanks!
Click to expand...
Click to collapse
Problem solved: Just flashed the pico Gapps, and now everything works fine. For some reason the dynamic Gapps didn't work for me.
mj56gt said:
Problem solved: Just flashed the pico Gapps, and now everything works fine. For some reason the dynamic Gapps didn't work for me.
Click to expand...
Click to collapse
May be there isn't enough space to flash them.
Happy that is working now
Sent from my Nexus 4 using XDA Free mobile app
So after a week of just bootloop, black screen of death and hard reset my rooted s5 suddenly open again.
Now that its open again what can I do to fix this? Cause im afraid that if i'll restart my phone i will get stuck in the bootlooop.
Suggestions?
Just to give you an update my s5 has been rooted for the past 2 years ...its just now that it got stuck in the bootloop.. im not really sure what caused this cause havent installed any apps that could affect the system...
Any ideas how can I fix it while its working again?
Would help if you gave us the model S5 it is, which firmware it's running, recovery etc?
Its g900f using stock rom... stock recovery
Please see attached file
Thanks in advance.
Download stock ROM using samfirm (or sammobile .com)
http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
Put phone in download mode
Connect to PC USB > add .MD5 ROM to AP section in ODIN 3.10.7
Flash
Boot to recovery > Factory reset
Any other fix without flashing?
Any other fix.. that doesnt require flashing?
kenchii17 said:
Any other fix.. that doesnt require flashing?
Click to expand...
Click to collapse
Why don't you want to reflash? If you're rooted you should have backups.
Ok I think I missed that part... ok so if I flash, everthing will be wiped out right?
How do I back it up?
kenchii17 said:
Ok I think I missed that part... ok so if I flash, everthing will be wiped out right?
How do I back it up?
Click to expand...
Click to collapse
No it won't, and for a proper backup you need TWRP recovery
If your phone is having problems like it is, you very likely need to flash
Just flash the stock ROM over the top and your apps and data will remain
But backup photos and important files first by connecting the phone to USB and copying to PC
Forget about apps, you can reinstall them if something goes wrong
Ok thanks im starting to understand it now.. i just need to confirm a few things before i start doing it...i have watched a few vids and ok i think i missed installing a custom recovery... ill install it later and go with cwm...
Flashing the stock.. means getting my firmware(which has the size of 1gig+) in sammobile ang flashing it using odin right?
Read my 2nd post
Thanks alot got it! One last question , suppose that im not going to lose my apps but am i going to lose root once i have flashed the stock rom?
Yep, just root again, instructions are all over the forum, easy to find
Because you're getting bootloops, I suggested factory reset too, that will wipe the device, the flash won't, the reset will
I assume here's the steps that i need to take
1. Back up through cwm
2. Flash stock rom through odin
3. Clear dalv cache
4. Factory reset through recovery or from the homescreen setting?(will this removed supersu?)
6. Root device again
5. Restore back backup from cwm recovery?
Better method:
Flash TWRP 3.0.2.0 (Much more powerful recovery)
Make full Nandroid backup in TWRP
Wipe everything apart from Internal and External storage
Boot into Download Mode
Flash stock ROM with ODIN 3.10.7
Reboot
Now boot back into download mode
Flash TWRP 3.0.2.0 again
Boot into TWRP
Flash systemless SuperSU 2.72 beta or whichever is the latest beta atm
Don't restore your backup or you could end up with the same problems as before, I recommend using TiBu to restore your apps and data from the backup you made in TWRP
*Detection* said:
Better method:
Flash TWRP 3.0.2.0 (Much more powerful recovery)
Make full Nandroid backup in TWRP
Wipe everything apart from Internal and External storage
Boot into Download Mode
Flash stock ROM with ODIN 3.10.7
Reboot
Now boot back into download mode
Flash TWRP 3.0.2.0 again
Boot into TWRP
Flash systemless SuperSU 2.72 beta or whichever is the latest beta atm
Don't restore your backup or you could end up with the same problems as before, I recommend using TiBu to restore your apps and data from the backup you made in TWRP
Click to expand...
Click to collapse
I have tried to flash twrp on my galaxy s5 (SM-G900V) and it did not work I am kinda stuck in the same problem. But I hit softbrick. Can you take a look at my post also?
jakeh9777 said:
I have tried to flash twrp on my galaxy s5 (SM-G900V) and it did not work I am kinda stuck in the same problem. But I hit softbrick. Can you take a look at my post also?
Click to expand...
Click to collapse
Verizon lock their bootloaders
*Detection* said:
Verizon lock their bootloaders
Click to expand...
Click to collapse
It's unlockable nowadays
*Detection* said:
Verizon lock their bootloaders
Click to expand...
Click to collapse
Can you check out my situation see if it is fixable without loading data? http://forum.xda-developers.com/galaxy-s5/help/how-recover-data-softbricked-galaxy-s5-t3382554
Rakuu said:
It's unlockable nowadays
Click to expand...
Click to collapse
Yep, but without unlocking it, he can't flash anything
jakeh9777 said:
Can you check out my situation see if it is fixable without loading data? http://forum.xda-developers.com/galaxy-s5/help/how-recover-data-softbricked-galaxy-s5-t3382554
Click to expand...
Click to collapse
http://forum.xda-developers.com/ver...t/rd-unlocking-galaxys-s5-bootloader-t3337909
Unlock your bootloader and try again
I am stuck at encryption failed when I flash stock oreo rom. I tried formatting data using twrp and flashed no encryption file as well but nothing works.:crying::crying::crying:
I just want to use the stock oreo rom again with root.
Pls help:crying:
Which ROM did you try and flash / install?
Try upgrading your TWRP to the latest version too.
jl10101 said:
Which ROM did you try and flash / install?
Try upgrading your TWRP to the latest version too.
Click to expand...
Click to collapse
I used partition dl mode to flash the stock oreo rom over 7.0 to keep the root. Then i flashed custom kernal for stock 8.0 but it didnt work. I have done the same procedure before and it has worked like a charm. But it keeps on giving the encrytion error when i try it now
Deadmeat03 said:
I used partition dl mode to flash the stock oreo rom over 7.0 to keep the root. Then i flashed custom kernal for stock 8.0 but it didnt work. I have done the same procedure before and it has worked like a charm. But it keeps on giving the encrytion error when i try it now
Click to expand...
Click to collapse
Odd. If I had to guess anything, it would be that not all the partitions were flashed when going from Nougat to Oreo.
I once flash a Nougat ROM from an Oreo ROM and I had the same encryption issue and lost everything.
That was the last time I would trust myself again and not do a backup.
Flash stock recovery from KDZ through patched LGUP & do a factory reset .
After stock recovery completes the wipe do a battery pull, flash TWRP via fastboot, format data, flash Kernel & Magisk & you should be back on track...
Prowler_gr said:
Flash stock recovery from KDZ through patched LGUP & do a factory reset .
After stock recovery completes the wipe do a battery pull, flash TWRP via fastboot, format data, flash Kernel & Magisk & you should be back on track...
Click to expand...
Click to collapse
I tried that as well. With stock recovery is says data is corrupted and doesn't do anything. I think it might be a problem with patched lg up because when i use normal lg up to flash oreo it works. But I cant root then.
I would try changing to 3.2.3-4 TWRP and then trying the procedure again. It seems that the 3.3.0 TWRP does not decrypt properly sometimes.
In the same boat as OP
scottyrick said:
I would try changing to 3.2.3-4 TWRP and then trying the procedure again. It seems that the 3.3.0 TWRP does not decrypt properly sometimes.
Click to expand...
Click to collapse
Hi
Looking for a way to keep TWRP and root ... any help appreciated
I've got a US996 with the same issue as the op. I have the latest TWRP 3.3.1-0. The phone was working fine until I upgraded twrp but I might have done a mistake resetting phone outside of twrp.
I can still get back into twrp but I haven't been able to install zip files without getting that decryption unsuccessful message when booting to system.
When getting back into TWRP using hardware buttons sometimes there is a prompt asking "keep system read only?" which I never chose and swipe to allow modification. I think this happens after
I pull the battery after getting the decryption unsuccessful message. There is a reset system that I could chose under the decryption unsuccessful message but I'm assuming that will make me lose twrp
...but if my phone is a us996 and is still
unlocked, would it matter if I did select it? Wouldn't I be able to reinstall twrp using adb again on a computer after Oreo is reinstalled?
To do Prowler_gr's suggestion which guide do I follow (sounds like I should do the second option)
"Flash stock recovery from KDZ through patched LGUP & do a factory reset .
After stock recovery completes the wipe do a battery pull, flash TWRP via fastboot, format data, flash Kernel & Magisk & you should be back on track... "
1-[GUIDE][UNBRICK] Patch LGUP to unlock features & unbrick V20 (Variant mismatch fix) to use lgup
or this guide
2-Ultimate guide to unbrick LG V20(Only Variants with .KDZ)[No OS Firmware Update Loop]
Thank you for any guidance on this...
There is a reset system that I could chose under the decryption unsuccessful message but I'm assuming that will make me lose twrp
Click to expand...
Click to collapse
Don't blame me if this goes wrong but I'm pretty much 100% certain that you mush press the rest button. This has happened to me a few times I'm sure. You won't loose twrp. Whatever resetting goes on in the background I don't think it's an actual Factory Reset.
Edit: Just to be clear you taking about a white screen with I think in dark blue or black text ENCRYPTION UNSUCCESSFUL and something like "reset phone" option directly under it, on the upper half of the screen?
Hi ezzony
Yes you are thinking of the right decryption unsuccessful page. I get it when booting to system
after installing Oreo and magisk 19 and having wiped everything (format data too). I will get the exact wording of it tonight
Thanks!
downgrade twrp i has same prob twrp 3.3.1 gives issues
ghet2rockuu said:
downgrade twrp i has same prob twrp 3.3.1 gives issues
Click to expand...
Click to collapse
Hi ghet2rockuu
I downgraded twrp and that got it working Thank You! see also Phoenix591 thread [Recovery][Unofficial for the moment]TWRP 3.3.1-0 : 2019-05-17 #625
Thank You !