Yotaphone stuck at bootloader - YotaPhone

I've just bought my yoataphone 2, when an update showed up, after installing it and rebooting, my screen went to bootload, but it says
android system recovery
then 4 option:
*Reboot system now (already tried, it comes back to that screen)
*apply update from ADB
*wipe data/factory reset
*wipe cache partition
E: Cannot load volume /misc!
tried selecting all of them but nothing works, please someone

Related

Trying to update to AOKP Build 5 - Now Phone Stuck at Google Boot Screen - Help?

Hey everyone,
As the title states, I'm stuck at the boot screen. It's got the Google logo with an unlock symbol at the bottom of the screen.
I was trying to update to the recent AOKP release (I had been on an earlier release) and something went wrong.
From this page http://forum.xda-developers.com/showthread.php?t=1766684 I followed these instructions:
Wipe data/factory reset, wipe cache, and wipe dalvik cache, then go into mounts & storage and format system (if using CWM). To format system w/TWRP, select Wipe then System!!!
I think the issue occured after I selected to wipe SYSTEM.
Now, I can get to the fastboot menu (volume down + power). I can select restart bootloader/recovery mode/start...but the phone always stops at the GOOGLE logo (with the unlock symbol at the bottom).
So then I tried to use the WugFresh tool kit to go "Back to Stock" with Current Status of "Soft-Bricked/Bootloop" but that didn't work either. The command prompt lines came up on the PC and it said everything was supposed to reboot (and may do it a few times) but mine just sat at the fastboot menu. When I tried again, I noticed a lot of things failing in the automated command prompt.
So now I'm not sure what to do. Can anyone help me?
Thanks
Edit: I should mention that I did update the bootloader first to makoz10o from http://forum.xda-developers.com/showthread.php?t=2105983

Stuck in bootloader & TWRP recovery is just blinking

Hi Anyone please help me. My Moto G model is XT1068
Before flashing new Titan Prime ROM, I wiped data, cache, dalvik cache, internal storage. But i got this Error : E:unable to mount data
Even unable to mount data manually using TWRP.
So finally tried to flash Moto G stock from Auto Restore Script, but it shows device not found,
now even recovery is not working, when i select recovery from boot mode selection menu by pressing volume+ key, TWRP just blinks everytime.
Anyone please help me.

How to solve problems after last official update (signal and soft keys) FOR NOOBS

So my soft keys doesnt work after last update, and there is a thread about that but people there know their way around all those softwares and ROMs and all that really good, and this should be thread to help noobs.
So I would really appreciate some good person to write and explain here all steps, with all needed links. I have never installed something on my S4 via Odin, or rooted it, or "flashed" custom or stock ROM (dont know what flash means). Thx very much
Joku1981 said:
I explain how I did it. Step by step:
1. Download and flash this ROM (via TWRP): HERE (follow the steps of the custom ROM thread to flash it correctly).
This ROM will force a new firmware to be flashed to the IC, firmware 0x1c, which works with the newer updates (at least with OJ2 on mine)
2. After you installed this ROM, go to the *#2663# screen and check to make sure it says 0x1c on 'Part's Touch key FW version'. Continue step 3.
3. Boot to recovery and choose (via TWRP): Wipe --> Advanced Wipe --> Dalvik, System, Data, Internal Storage and Cache. Then Swipe.
4. Reboot in DOWNLOAD MODE and flash via ODIN normally the latest Lollipop to your device (OJ2 on mine)
5. Wait the booting. Done. Signal and soft keys working again.
All credits go to @andonsky & @dafonehacker (not to me).
Click to expand...
Click to collapse
so I flashed TWRP via odin ( I followed instructions found online)
then i started following instructions on thread you gave me link to, I did updated modem and bootloger (2.Update your Modem & Bootloader to the Latest Lollipop Ones vby following this Guide)
then I copied that ROM (albe95) on my phone and shut it down.
next step is boot recovery and with twrp go first to wipe then to install. and this is where I have stuck. there is no install, and there is wipe but it says wipe cache and wipe something else. there is no difference between recovery mode i had before flashing twrp and now when i flashed twrp. the only difference is that now when i go for recovery boot (press power, vol, home) , in the left up corner there is line of blue letters, then underneath line of yellow letters (somethng says Sandroid) and then line of red letters (it says recovery something). before I flashed twrp there was just in upper left corner of the screen small blue letters saying recovery boot.
and then I enter recovery boot mode and it says like this:
Android system recovery 3e
LRX22C.I9505XXUHOA7
Volume up/down to move highlight;
power button to select.
reboot system now
apply update from ADB
apply update from external storage
apply update from cache
wipe data/factory reset
wipe cache partition
reboot to bootloader
power down
view recovery logs
Enable cp logging
Disable pc logging
and then all the way down:
#MANUAL MODE#
appling multi-CSC...
applied the CSC-code : VIP
Succesfully applied multi-CSC
help anyone I am stuck
Aedan2 said:
so I flashed TWRP via odin ( I followed instructions found online)
then i started following instructions on thread you gave me link to, I did updated modem and bootloger (2.Update your Modem & Bootloader to the Latest Lollipop Ones vby following this Guide)
then I copied that ROM (albe95) on my phone and shut it down.
next step is boot recovery and with twrp go first to wipe then to install. and this is where I have stuck. there is no install, and there is wipe but it says wipe cache and wipe something else. there is no difference between recovery mode i had before flashing twrp and now when i flashed twrp. the only difference is that now when i go for recovery boot (press power, vol, home) , in the left up corner there is line of blue letters, then underneath line of yellow letters (somethng says Sandroid) and then line of red letters (it says recovery something). before I flashed twrp there was just in upper left corner of the screen small blue letters saying recovery boot.
and then I enter recovery boot mode and it says like this:
Android system recovery 3e
LRX22C.I9505XXUHOA7
Volume up/down to move highlight;
power button to select.
reboot system now
apply update from ADB
apply update from external storage
apply update from cache
wipe data/factory reset
wipe cache partition
reboot to bootloader
power down
view recovery logs
Enable cp logging
Disable pc logging
and then all the way down:
#MANUAL MODE#
appling multi-CSC...
applied the CSC-code : VIP
Succesfully applied multi-CSC
help anyone I am stuck
Click to expand...
Click to collapse
Hi,
Looking at that list I would guess that the TWPR didnt flash correctly as that is the stock recovery options.
Try flashing it again via Odin, if it still doesnt work, maybe try rooting the phone with CF Auto root flashed via Odin, then flash TWPR.
cheers
Aedan2 said:
so I flashed TWRP via odin ( I followed instructions found online)
then i started following instructions on thread you gave me link to, I did updated modem and bootloger (2.Update your Modem & Bootloader to the Latest Lollipop Ones vby following this Guide)
then I copied that ROM (albe95) on my phone and shut it down.
next step is boot recovery and with twrp go first to wipe then to install. and this is where I have stuck. there is no install, and there is wipe but it says wipe cache and wipe something else. there is no difference between recovery mode i had before flashing twrp and now when i flashed twrp. the only difference is that now when i go for recovery boot (press power, vol, home) , in the left up corner there is line of blue letters, then underneath line of yellow letters (somethng says Sandroid) and then line of red letters (it says recovery something). before I flashed twrp there was just in upper left corner of the screen small blue letters saying recovery boot.
and then I enter recovery boot mode and it says like this:
Android system recovery 3e
LRX22C.I9505XXUHOA7
Volume up/down to move highlight;
power button to select.
reboot system now
apply update from ADB
apply update from external storage
apply update from cache
wipe data/factory reset
wipe cache partition
reboot to bootloader
power down
view recovery logs
Enable cp logging
Disable pc logging
and then all the way down:
#MANUAL MODE#
appling multi-CSC...
applied the CSC-code : VIP
Succesfully applied multi-CSC
help anyone I am stuck
Click to expand...
Click to collapse
Uncheck auto-reboot in Odin before flashing TWRP.

[Help] Yureka stuck at Cyanogen boot logo.

Hello Folks,
I performed wipe cache partition on my device after which it got stuck at cyanogen screen.
Its running CM12.1 and the default recovery. Also one of the main issue is that it is not responding to fastboot commands<waiting for device>.
I also performed wipe data/factory reset and wipe media now whenever i try to update via sd card it gives me error
Unable to detect E:/can't mount like something error.
Any Solution???

How to install android to wiped phone?

I wiped my phone's Dalvik / ART Cache, Cache, Data, System. And wanted to install CypherOS Pie. And boot, oem, odm, root, product, recovery, sideload, sdcard are empty (I checked through twrp file manager). Everytime my phone boot, it boots to
"Your device has been unlocked and cant be trusted".
I wait until it boots and I see
"ERROR MODE
Attention!
Please update system again
Error!
Func NO: 11 (Recovery image)
Error NO: 2 (load failed).
same error happens when i try to boot to erecovery (by holding VOL UP 3 seconds)
I can enter TWRP by VOL UP, VOL DOWN, POWER keys
And I don't find a way to install Android. I tried every method I know. Can someone tell me how to make my phone working again? Please
PHONE and FRP are unlocked
EMUI 8, WAS-LX1C432

Categories

Resources