Database Users

[ROM-sGSI] [ZUI 10.0]/[ZUI 5.0] From Z5 FOR Z2 Plus [Oreo]

What is this?
- sGSI of ZUI 10.0/ 5.0 from Lenovo Z5pro/Z5, based on Android 8.1.0, June 1,2018 security patch.
Since this was requested in some comments, I flashed it and found working for our device flawlessly, with some bugs.
Features?
-All features of ZUI 4 + Soft Charge, gestures, multi space ( dual apps ) etc. Split Screen is also available.
How to flash?
ZUI 10 :
1. Download the flashable zip from the links.
2. Boot to twrp, and wipe dalvik, cache, data, system and vendor.
3. Flash the zip.
4. Reboot.
ZUI 5:
Method 1 : (Recommended)
- 1. Download any treble based 8.1.x rom and ZUI5.0-sGSI.zip (link below).
[Please use MIUI 10 8.11.1 by Narshi Shukla as base ROM, as it seems it's Vendor is most compatible.]
2. Extract the zip in your storage. You will get three files ( two flashable zips and one folder "sGSI.....". [Folder name might differ, there will be only one folder, so no worries])
3. Boot into recovery and take a backup.
4. Clean flash treble based Oreo ROM that you downloaded.
5. From your twrp, use file manager to move " sGSI...." folder to backup folder of Twrp.
6. Mount system and vendor and wipe cache/delvik, data and system.
( Don't wipe firmware and Vendor )
7. Goto restore in your twrp and restore the system from "sGSI....." folder.
8. Flash the remaining two zips.
9. Flash magisk if needed.
10. Wipe cache/delvik and reboot. Done.
Method 2 : https://forum.xda-developers.com/showpost.php?p=78389810&postcount=320
(You need treble based twrp, search if you don't already have).
After following all these steps, if your phone is stuck in Lenovo powered by android screen for long, then force reboot the phone and it will boot up to system.
What works?
-Here:
Call,SMS, VOLTE, Data, play store, Utouch, Fingerprint , Navigation, Double touch to wake, GCAM, Face Unlock, Hotspot, Banking apps, nearly everything.
What doesn't work?
- ROM specific. Bugs depend upon the treble ROM that you used as base. In some ROM, system sounds does not work. In MiUI 10, video recording might not work. Game Mode has some issues with global apps.
*FOR VIDEO RECORDING - see this : https://forum.xda-developers.com/showpost.php?p=78219358&postcount=93 ****
*Update GPU drivers for VULKAN support. Link in the links section.***
Performance?
- Better than ZUI 4, smooth as butter, no stutter playing games like PUBG, notifications on time, decent SOT.
Can it be used as daily driver?
- Yes, if you can live with some Chinese texts in certain apps.
Any other thing?
- Because the ROM is ported from Z5 which has a notch, total area of the notification bar cannot be used. To see things like real time network speed and battery "percentage" you have to pull down the notification bar.
What should I do first after booting the device?
- Install play store from App center. Install magisk to remove bloat wares. Install any music app, since there is none. This will make the system optimal for us.
Also, Turn "True Full Screen Mode" ON in display settings for full screen in Apps.
Install Magisk and download and install "SafteyPatch V2" within Magisk to pass safetynet and hide banking apps in magisk hide to use them.
Open security app and give all important permissions to the apps you use, including system apps. Also include them in autorun/whitelist section.
Links?
-Here
ZUI 10
https://drive.google.com/open?id=17lyWnAl0Kjkv5S89wdtw7HglF2072zP5
ZUI 5
Mega link :
https://mega.nz/#!FyxSiI7Y!iZmmVufR6pipX3mwv_-I3HqI714YAMJN1a2zIysinmc
Gdrive link:
https://drive.google.com/open?id=1F_Ou6x2bj26hhdffw45uo4r9qlJuaDb5
MiUi 10 8.11.1 Narshi Shukla - Full Rom
https://androidfilehost.com/?fid=11410932744536996684
MIUI 10 8.11.1 Narshi Shukla - Vendor for twrp recovery: @(THIS VENDOR isnt compatible with all roms, if facing random reboots, use the complete MIUI 10 ROM for the Gsi)
https://drive.google.com/drive/u/0/folders/15QHEUfLMagMV9jZTmlUHa4hkhkNTF-RC
Working GCAM link :
https://www.celsoazevedo.com/files/android/google-camera/f/MGC_6.1.021_FINAL_V1a_A8.1+.apk
VULKAN enabled open GL 3.2 driver link :
https://drive.google.com/folderview?id=11_atz5CDK9bHG4K_ME2LSRFFnxxKqWw2
Credits:
Not my work, I am just sharing it since I found it working.
All credits goes to this Xiaomi thread and bugrevealingbme.
https://*************/threads/zui-5-0-a-only-treble-rom.226/
******************************** FLASHING ISSUE ******************
While flashing this ROM, try to follow the guide above as strictly as possible. Use the ROM that is recommended.
If you are facing bootloop, download the vendor that is provided and restore it in twrp and then flash patch 1 and 2.
Also remember, during each and every step, your TWRP should have system and Vendor mounted. Check after every step.
Your phone might reboot once or twice during first boot, which is not an issue.
How to know if you flashed it correctly?
-If your phone boots into the system with "Lenovo bootanimation" , you flashed it correctly.
If your phone is stuck in "Lenovo - powered by android" splash image for more than 5 minutes, you got something wrong.
*********************************************************************
Screenshots attached :

what about gcam nd notification bug? and one more doubt, can we flash it over treble pie ROM?

I have one question. If i install a sgsi rom can i back to trenle, non-treble rom just with a simple flash method?

muujeeb said:
what about gcam nd notification bug? and one more doubt, can we flash it over treble pie ROM?
Click to expand...
Click to collapse
gcamera is working on redmi note 5 pro. should work also here.

muujeeb said:
what about gcam nd notification bug? and one more doubt, can we flash it over treble pie ROM?
Click to expand...
Click to collapse
GCAM is working.
Notification bug is not there. Only sometimes, it seems that we get late notification.
You have to flash it over Oreo because the GSI is Oreo based. Flashing over pie should work as well, since treble ROM is required. Take a backup of your system so you can restore easily, if you face any issue.

nonamesry said:
I have one question. If i install a sgsi rom can i back to trenle, non-treble rom just with a simple flash method?
Click to expand...
Click to collapse
Yes, you can get back to the ROM you want with simple flash, no problem.

Custom kernel flashable?

ashwinonm said:
Custom kernel flashable?
Click to expand...
Click to collapse
Haven't tested, but should be flashable.
Edit : Custom kernel might brick the device. Will test and update.
Donot flash custom kernel, it causes self restart of device.
Note: Moxie kernels can be flashed, you should flash patch2 after flashing kernels. But, MIUI 10 comes with moxie R5.1 so no use flashing Moxie again.

link not working

Wow it's so beautiful!

I used Arrow OS 8.1 but it got stuck in bootloop and does'nt boot at all.. I followed all the steps accordingly but it did not boot up even after i kept my phone overnight to let it boot. I don't know where i did wrong.

muujeeb said:
I used Arrow OS 8.1 but it got stuck in bootloop and does'nt boot at all.. I followed all the steps accordingly but it did not boot up even after i kept my phone overnight to let it boot. I don't know where i did wrong.
Click to expand...
Click to collapse
Use MIUI 10 port of Narshi Shukla latest build. It works.
May be Arrow OS cannot be used.
You can also try using Vendor of MIUI 10 once. Restore this vendor and the system image of ZUI.
Here is the vendor:
https://drive.google.com/drive/mobile/folders/15QHEUfLMagMV9jZTmlUHa4hkhkNTF-RC?usp=drive_open

kany1 said:
link not working
Click to expand...
Click to collapse
Link is working fine.

jebish7 said:
Link is working fine.
Click to expand...
Click to collapse
yes it is working with mega app

I used crdroid 8.1 and got stuck in bootloop. then I try restored the vendor but could not flash the patch 2
---------- Post added at 01:19 PM ---------- Previous post was at 01:13 PM ----------
ok i try to flash it again and boot successflly

marclevine said:
I used crdroid 8.1 and got stuck in bootloop. then I try restored the vendor but could not flash the patch 2
Click to expand...
Click to collapse
I think only MIUI 10 rom works flawlessly for this GSI. I will update the main page details and ask to use MIUI 10 only.
You couldnot flash patch 2 because it requires vendor, and may be your vendor is now messed up.
So use MIUI 10 port, it works without any issue.

marclevine said:
I used crdroid 8.1 and got stuck in bootloop. then I try restored the vendor but could not flash the patch 2
---------- Post added at 01:19 PM ---------- Previous post was at 01:13 PM ----------
ok i try to flash it again and boot successflly
Click to expand...
Click to collapse
Glad To hear.

So in whatever rom I am in Oreo , I can use that firmware if I use vendor only from your backup? And shouldn't wipe it?

ashwinonm said:
So in whatever rom I am in Oreo , I can use that firmware if I use vendor only from your backup? And shouldn't wipe it?
Click to expand...
Click to collapse
Well, that's how some people got this working, so yes, it's working that way as well. ( Your ROM should be treble based though )
I will attach the "Vendor" file in the main post as well, so other members can use it too.

custom kernel possible,mine running in moxie

[Guide] Install Lineage OS 17 and AOSiP (Android 10) GSI on Mi Max3

** Post updated on 01/10/19 to include AOSiP GSI **
After trying out a lot of Android 10 GSIs, I have managed to get Lineage OS 17 and AOSiP GSI builds by Erfan to run on Mi Max 3. Thanks to the Dev erfanoabdi and his team who have worked on these.
On Mi Max 3 they are very smooth when they are working. However, certain apps can trigger freezing episodes or forced reboots. AOSiP seems smoother and more stable for now. Both are almost stock with no customization. Over all they are still buggy, just usable, and not reliable.
I am not a developer! Try at your own risk!!
** PLEASE NOTE: You would need to be on one of the AOSP- or LOS-based custom Pie Roms with firmware version 9.9.3 (as base) before flashing this rom. Havoc and AEX have been confirmed to work**
Here are the steps
What you would need:
1. GSI Android 10 Rom:
a. Lineage 17 GSI by Erfan: lineage-17.0-Aonly-10-20190909-ErfanGSI.img.7z
b. AOSiP
2. Permissiver_v4.zip
3. FixZygote_v2.zip
4.open_gapps-arm64-10.0-nano-20190920-UNOFFICIAL.zip
5. Magisk 19.4
6. Any file extractor app. I used ZArchiver from Play store.
Installation Steps.:
1. Extract system image from Android 10 GSI zipped file using app of your choice (ZArchiver in my case)
2. Boot into your recovery (I used Nijel's TWRP 3.2.3-3 and 3.2.3-4)
3. Back up your current ROM
4. Wipe data, system, art/davlik and cache
5. Tap install. Then tap ''Image''. Then select the (extracted) Lineage-17 system image, then tap System. Swipe to install.
6. Install Permissiver_v4 zip file.
7. Install FixZygote_V2 zip file
8. Install Magisk 19.4 zip file.
9. Boot into system. Tap ''OK'' on the screen pop up.
10. Reboot into TWRP.
11. Install OpenGaps.
13. Reboot system and set up your phone.
14. Reboot phone and start using.
What works
1. Mobile data, Wifi and bluetooth
2. Phone calls and messaging including dual sim
3. Playstore
4. Rooting with Magisk
5. Finger print reader
6. Gestures are amazing. Dark mode great!
Bugs
1. Stock camera and torch light do not work.
2. Slider does not control brightness
3. Chrome browser freezes. . Firefox and Via browser running smoothly.
4. Camera and video apps force-close or cause random reboots

Where are the links to the packages and why you install two different gapps (Bitgapps&Opengapps)???

L_e_x_t_e_r said:
Where are the links to the packages and why you install two different gapps (Bitgapps&Opengapps)???
Click to expand...
Click to collapse
There are no links to the packages as I wasn't certain of the XDA rules on links to other websites. Just google them and they are easy to find.
I tried just open gapps or just BitGaps and didn't work. Flashing BitGaps first appeared to point the Open Gapps to the right partition, and that worked.

Thanks for posting but very confusing without links. I know what mean about the rules but you can link the page for the GSI not the download etc

shingers5 said:
Thanks for posting but very confusing without links. I know what mean about the rules but you can link the page for the GSI not the download etc
Click to expand...
Click to collapse
I understand.
Thanks to the Nesh Patel at Tweakguy for the links.
My thanks to the devs who have worked on these.
Here are the links:
For Lineage GSI: https://github.com/resk84/releases/...ineage-17.0-Aonly-10-20190909-ErfanGSI.img.7z
For permissive: https://androidfilehost.com/?fid=600693192411788649
For bitzygote:
https://androidfilehost.com/?fid=1395089523397961748

Permissive link not working

shingers5 said:
Permissive link not working
Click to expand...
Click to collapse
Missed one digit at the end.
Permissiver link:
https://androidfilehost.com/?fid=6006931924117886495

This won't boot on global mix max 3 boot loop with both Nigel mod and orangefox recoveries. No work for global 4gb 64gb ROM model

shingers5 said:
This won't boot on global mix max 3 boot loop with both Nigel mod and orangefox recoveries. No work for global 4gb 64gb ROM model
Click to expand...
Click to collapse
I was on the latest Havoc Rom for Mi Max 3. Also my hardware is 6GB 128GB.
I tried a lot of the Android 10 GSIs and this was the only one that booted. The sequence has to be exactly same as in my post to boot.
Also, I don't know if it may have to do with your vendor. I didn't wipe and then flash the device-specific vendor firmware as suggested in some GSI how-to's.

So you were on an android pie ROM and flashed android 10 over it without wipe? I was on miui 11 before flash on global device

shingers5 said:
So you were on an android pie ROM and flashed android 10 over it without wipe? I was on miui 11 before flash on global device
Click to expand...
Click to collapse
Yes Havoc Pie Rom. I wiped davlik/art, system, data and cache only. Then proceeded exactly as outlined in my post. I have just flashed the LOS 17 again with my steps and it boots.

stonesolouk said:
Yes Havoc Pie Rom. I wiped davlik/art, system, data and cache only. Then proceeded exactly as outlined in my post. I have just flashed the LOS 17 again with my steps and it boots.
Click to expand...
Click to collapse
first attempt
i had derpfest AOSIP so i flashed LOS 17 over that with no wipe then the permissive and fix zip and it booted with errors. gestures for home works but edges dont. also kept fail on system etc
2nd attempt
flashed derpfest AOSIP then reboot
back to recovery then wipe as you did flash LOS17 then permissive and fix zips then reboot. boots up but same as before home gesture works and dark mode etc but edges don't. the bitgapps dont flash and open gapps nano causes bootloop on its own
3rd attempt gonna try with firmware 9.9.3 and flash without wipe vendor like the old days to see what happens

Got it good as I can for now
Flashed and booted AEX 6.7
Back to recovery and wiped as you say and not vendor
Flashed LOS 17 image then permissive and fix zips and magisk
Reboot
Didn't need flash 2 gapps just open gapps nano and reboot
Seems good apart from obvious
Brightness doesn't work
Camera
Battery drain very high

shingers5 said:
Got it good as I can for now
Flashed and booted AEX 6.7
Back to recovery and wiped as you say and not vendor
Flashed LOS 17 image then permissive and fix zips and magisk
Reboot
Didn't need flash 2 gapps just open gapps nano and reboot
Seems good apart from obvious
Brightness doesn't work
Camera
Battery drain very high
Click to expand...
Click to collapse
That's great. It settles down after a few more boots. I will update my post with your findings.
Brightness and all edge gestures work for me though.

stonesolouk said:
That's great. It settles down after a few more boots. I will update my post with your findings.
Brightness and all edge gestures work for me though.
OK cool. Hopefully someone can get it working fully or at least stable enough for daily use
Click to expand...
Click to collapse

And what about the AOSIP-Aonly-10-20190924-ErfanGSI.7z? Do I flatten the Lineage-17.0-Aonly-10-20190909-ErfanGSI.img or do I have to decide between one of them?
Does not herfor from the instructions

rudiratlos57 said:
And what about the AOSIP-Aonly-10-20190924-ErfanGSI.7z? Do I flatten the Lineage-17.0-Aonly-10-20190909-ErfanGSI.img or do I have to decide between one of them?
Does not herfor from the instructions
Click to expand...
Click to collapse
Yes it is one or the other.
You could try each one separately, then decide the one you prefer. AOSiP seems more fluid and stable.

Thank you for your prompt reply

What's the report on AOSIP as I haven't tried it yet. Wish someone would take the gsi and get it stable

shingers5 said:
What's the report on AOSIP as I haven't tried it yet. Wish someone would take the gsi and get it stable
Click to expand...
Click to collapse
It is smoother and more stable compared to LOS 17 but brightness slider and camera still don't work.

recovery the bricked phone, but how can I upgrade to android 9?

just use MsmDownloadTool V4.0.exe to recovery my op5 to oos, but the version is quite low as Android 7.1.1.
checked the system update, it told me up to date. which is of course not true.
tried to clean the cache of google framework service and oneplus framework service, still nothing in updating.
tried installed oxygen updater, and download 3 update zip from 7.1.4, 8, last version of 8, but each time I use local install in system uploading, then reboot to recovery, it shows me "failed". none of version works.
I even tried to install in recovery, wipe cache and data or just wipe data, then install from internal disk, none of the file works, even don't have any popup fail notice, just go back to file chooser interface.
I can still go back to system by switch off and on again.
How can I upgrade the old version of android in my oneplus 5?
original:
used use lineages os with Twrp, and I would like to flash to original oxygen.
download full rom zip in https://www.oneplus.com/uk/support/softwareupgrade/details?code=PM1574156143164
copied to phone disk
went to twrp
wipe Dalvik, System, Data, and Cache
then tried to install the full rom zip, but met "no Digest File found" error
found it must be twrp old, so I download new one in https://dl.twrp.me/cheeseburger_dumpling/twrp-3.4.0-0-cheeseburger_dumpling.img.html
copy to phone and flash it to recovery.
select "reboot to recovery"
then problem coming: I can only see the oneplus logo with powered by Android. it won't go any further.
I am not sure any thing wrong during my processing, but maybe 2 things:
1, I wiped the system
2, I didn't clean the screen lock pin before I flash
so, my question here is, if possible I can flash the original oxygen os in this situation?
if positive, could you please give me a step by step instruction?
by the way, the zip rom I download from oneplus site isn't have the "flash-all" script.
please please help me .

First install OxygenOS 5.1.4 based on Android Oreo and boot to that version to create /vendor partition for Treble support

Pierre02 said:
First install OxygenOS 5.1.4 based on Android Oreo and boot to that version to create /vendor partition for Treble support
Click to expand...
Click to collapse
thanks! it works! i'm at 5.1.2 then i install OxygenOS 5.14 (OnePlus5Oxygen_23_OTA_037_all_1807181258_7b4b6.zip) then after that I install OnePlus5Oxygen_23_OTA_042_all_1812232102_a034988b.zip and then the last and the latest OnePlus5Oxygen_23_OTA_068_all_2006012224_c7a6016.zip android 10.

Please help. I bought a phone with Beta installed. I wanted to switch to the original system. So I screwed up something so using the MsmDownloadTool tool I wanted to use it by uploading everything from scratch. I fell into the Chinese H2Os system. I searched again and I already have the original ColorOS based on Android 9. But I can't update it to 10. What do I have to do? Oh .... the bootloader is unlocked ...

uno0 said:
Please help. I bought a phone with Beta installed. I wanted to switch to the original system. So I screwed up something so using the MsmDownloadTool tool I wanted to use it by uploading everything from scratch. I fell into the Chinese H2Os system. I searched again and I already have the original ColorOS based on Android 9. But I can't update it to 10. What do I have to do? Oh .... the bootloader is unlocked ...
Click to expand...
Click to collapse
Use an EDL Flasher (unbrick tool) here on XDA

Pierre02 said:
First install OxygenOS 5.1.4 based on Android Oreo and boot to that version to create /vendor partition for Treble support
Click to expand...
Click to collapse
thanks for replying
I had figure out my problem.
it seems the rom I flashed using MsmDownloadTool had something wrong,
I've changed another one, it shows me the update from the first start after flashing.

uno0 said:
Please help. I bought a phone with Beta installed. I wanted to switch to the original system. So I screwed up something so using the MsmDownloadTool tool I wanted to use it by uploading everything from scratch. I fell into the Chinese H2Os system. I searched again and I already have the original ColorOS based on Android 9. But I can't update it to 10. What do I have to do? Oh .... the bootloader is unlocked ...
Click to expand...
Click to collapse
if you are directly flash to coloros android 9 from lower version other than android 8, it might be the problem you won't got the update in the system. It might be have issue in wifi or gps as well, which I bet you didn't well test yet.
that's all about the system partitions messed up. regarding my understanding.
solution is simple, but time consuming:
you have to flash an original rom using msmdownloadtool, make sure that rom will have update notification in the system menu of settings. then upgrade from there one level up each time, till to the android 10. (chinese version do have 10 available)
than, you can download oxygen os android 10 to flash on the coloros android 10 (hydrogen os android 10) you just done the upgrade, don't forget wipe data/cache before flashing.
hope that's helps.

netzkie said:
thanks! it works! i'm at 5.1.2 then i install OxygenOS 5.14 (OnePlus5Oxygen_23_OTA_037_all_1807181258_7b4b6.zip) then after that I install OnePlus5Oxygen_23_OTA_042_all_1812232102_a034988b.zip and then the last and the latest OnePlus5Oxygen_23_OTA_068_all_2006012224_c7a6016.zip android 10.
Click to expand...
Click to collapse
Kindly tell me in steps you follow m stuck in 4.5.8 version with download links

[SHARED][ROM] oneOS

Used MIUI Based for Pocophone F2 Pro, Mi 9T, Mi 9T Pro
First version for Mi 8, Mi 8 Lite, Mi 8 SE, Mi 8 Pro
Before starting you will need to have the bootloader unlocked and have a custom Recovery (Keep in mind that the instructions in the previous links are generic, your device may require additional steps, check the forums of / XDA Developers in the section of your device for alternative instructions)
The OneOS team is not responsible for any lost data or damage caused to your device, all roms before being published are rigorously tested. Please read the instructions provided carefully
The steps to install are very simple, if you follow them to the letter, no problem will arise.
Download OneOS for your device
Make a backup of all your data, synchronize a copy of Xiaomi Cloud and Google, make a backup of WhatsApp, and all your photos and files in the internal memory
Reboot the device in Recovery
Go to the Wipe tab and perform a "factory format" which forces you to write "yes" on the screen
Reboot back into recovery
Transfer the previously downloaded OneOS file to internal memory
Go to the "install" tab
Select the OneOS file
Once installed, reboot (boot may take 10 to 15 minutes)
Update to new version of OneOS:
Unless otherwise indicated, it will not require any wipe
Download the OneOS update, you can do it from the updater itself, this is automatic and does not require a manual download.
If you have opted for the manual download of the update, you have two options:
From the OneOS updater select the installation package that you just downloaded
From Recovery, in this case, restart in Recovery, click on the "install" tab and select the file previously downloaded. If you did it from the computer, first you must transfer the file to the internal memory of the device. Once the installation has concluded, restart in the system and wait 10/15 minutes for it to boot.
ALL INFORMATION ON SITE: https://one.revtechs.me/en/
MOD EDIT: Telegram link removed, please read the STICKY!
I dont know why this rom is not present here but is one of the best , based on MIUI BASE..
every information can find on web site or telegram group..
I am using it for a week and it awesome,stable smooth.. try it for yourself..

Is SELinux enforced in this ROM?

does this have call recording?

mmhs said:
does this have call recording?
Click to expand...
Click to collapse
yes.
Update 201117
---------- Post added at 01:36 PM ---------- Previous post was at 01:19 PM ----------

New version from today!
This is the best ROM that I ever use.

I don't sucess to flash magisk 20.4 on this rom (magisk manager don't recognize the magisk 20.4 installation)

Can you write additional features present in this rom except of xiaomi.eu and official rom features

mekton said:
I don't sucess to flash magisk 20.4 on this rom (magisk manager don't recognize the magisk 20.4 installation)
Click to expand...
Click to collapse
Use Magisk Canary

pakom8 said:
Use Magisk Canary
Click to expand...
Click to collapse
with this version (magisk-debug.zip Update Canary Channel: Upstream to 1469b82a) on https://github.com/topjohnwu/magisk_files/tree/canary ?

mekton said:
with this version (magisk-debug.zip Update Canary Channel: Upstream to 1469b82a) on https://github.com/topjohnwu/magisk_files/tree/canary ?
Click to expand...
Click to collapse
yes that one

I'm in LOVE with this ROM.......awesome!!!

What is battery backup on this rom ?

paclaco said:
I'm in LOVE with this ROM.......awesome!!!
Click to expand...
Click to collapse
Looks like regular MIUI Eu to me.

mookiexl said:
Looks like regular MIUI Eu to me.
Click to expand...
Click to collapse
Miui EU dont have center clock, dont have options to configurate colors on status bar, and more options and one os have better batery Life.
In my opinion is better option if you have Xiaomi base.
Is diferent.....taste It and tell me after.

Does it pass safetynet?

Their latest changelog and EU MIUi latest changelog is pretty similar. ?
Edit : digged up even more to their website, and found that they also used EU MIUi as based roms as well CN Dev Rom, so yeah, it makes sense that their changelogs are about the same, This Rom looks solid overall though, planning to flash this rom later.

flor90 said:
Does it pass safetynet?
Click to expand...
Click to collapse
https://youtu.be/yMznuKMvBwg

I have oneos with magisk and safety net success, someone knows if the update requires the same procedure for safety net success, I am on the previous version and it seems wonderful

I'm really impressed with oneos. Flashing from eu stable 12.1.3.0 using TWRP. Just format data. Flashed magisk canary. I'm only playing an hour with it, but no problems with booting or disappearing TWRP (I'm using 3.4.2b). Didn't have to use fastboot. GPS was funky on the first try (low number of satellites), but looks that it's ok now. So far no problems

Can anyone comment on what dialler it uses? Google or Xiaomi?

Official LOS, how to upgrade to 20 ?

I couldn't find a thread for official LOS so I hope it's ok if I post my question here.
I'm using official LOS 19.1 for Zenfone Max Pro M1 (X00TD) and saw the new 20.0 so I wanted to upgrade, but don't know if a new firmware and/or gapps package is required, and if I can just dirty flash the new LOS or do I have to format?
Thanks in advance

im using it currently. the best os for our device. i used to get 20% drain overnight in any rom but lineage 20 took only 2%. os is so smooth and fast. search in google for official lineage os for max pro m1 then go to download section get latest build. for gapps you can click help and guide section then you can download mindthegapps 13. download 87 firmware.
INSTALLATION: in orangefox recvery go to wipe format data by typing yes then reboot to recovery again go to wipe then wipe dalvic,cache,system,data,vendor,asus firmware then flash 87 firmware, lineage 20,mindthegapps then reboot.
its official and we get frequent updates. cts profile fail we can fix it with saftynet fix module, everything works, no bugs found. only annoying thing is while receiving phone call it doesn't show anything, only ringtone we can hear.after call ends it show missed call notification. only few peoples face this and this bug exists with many versions of lineage os. you have to go to permissions then tick override DND in notification or select dailer as default or you can change dailer then things work fine. audio quality is not that good, it lacks base.

Ramesh006 said:
go to wipe format data by typing yes then reboot to recovery again go to wipe then wipe dalvic,cache,system,data,vendor,asus firmware then flash 87 firmware
Click to expand...
Click to collapse
Thanks for your reply. So dirty flash is not enough, it needs a full reinstall
Do you use firmware 87 from here or from another source?