I have a SWM-9128,unbranded Android head unit. I have purchased a connects2 steering wheel box https://connects2.com/Product/ProductItem/CTSMZ002.2
I used it perfectly with my JVC so I know it's working. The wires that were connected to the harness were red, yellow , black, rear speaker positive and front speaker positive. I had to cut the box away from the harness to use with the Android unit.
The speaker wires (connected separately from the actual speakers) were connected to the red block that connects to the car. These had to be removed as well (I stupidly cut them first , then realised I needed to remove the pins) I've attached the photo.
So I connected it all up , red to ignition , yellow to live,black to ground and the pins to the new harness plug. As well as the key1 , key2 and ground.
The SWC app of the unit allows me to program one button (I have to press it multiple times) but then when I want to do another it gets rid of the first!
Has anyone successfully connected up to this? Anyone know if I am doing something wrong?
Any help would be appreciated!
Harness plug- https://ibb.co/QKHFZyz
Cables to harness - https://ibb.co/qFbwkk3
Hello guys,
I have a S8 Premium and i cant get the subwoofer to work.
So my connections are:
From the Atoto subwoofer output to the amplifier and from the amplifier to the subwoofer. A complete normal connection between radio and subwoofer.
When i connect the subwoofer to the RR/RL or FR/FL it works like a normal speaker but when i connect it to the subwoofer output like it shud be it doenst work.
I made a video trying to find the subwoofer settings and i cant find it, i have seen alot of videos where you can turn on/off the subwoofer, but in my atoto i dont have that functionality.
Can anyone help? Thanks guys!
Here is the vídeo :
AlexisGarci said:
Hello guys,
I have a S8 Premium and i cant get the subwoofer to work.
So my connections are:
From the Atoto subwoofer output to the amplifier and from the amplifier to the subwoofer. A complete normal connection between radio and subwoofer.
When i connect the subwoofer to the RR/RL or FR/FL it works like a normal speaker but when i connect it to the subwoofer output like it shud be it doenst work.
I made a video trying to find the subwoofer settings and i cant find it, i have seen alot of videos where you can turn on/off the subwoofer, but in my atoto i dont have that functionality.
Can anyone help? Thanks guys!
Here is the vídeo :
Click to expand...
Click to collapse
Did you ever get this figured out? I found the sub settings but the output is very low even turned all the way up in the eq app.
@slow66
gotta get a line driver :|
https://smile.amazon.com/Peripheral-PAC-LD10-Driver-Booster/dp/B003LWV77Y
cheaper on ebay.
Amazon.com: Eightnoo RCA Male to RCA Male - Male to Male RCA Coupler Plug Adapters Connector, Pack of 5 : Electronics
Buy Eightnoo RCA Male to RCA Male - Male to Male RCA Coupler Plug Adapters Connector, Pack of 5: Connectors & Adapters - Amazon.com ✓ FREE DELIVERY possible on eligible purchases
smile.amazon.com
tap either acc or amp wire to power it
Another alternative line driver that others have used that has Front/Rear/Sub in/out
https://www.amazon.com/dp/B07PJ2KZ63/ref=cm_sw_em_r_mt_dp_MMG5JVGQ6NBM5F3S729Q
ziddey said:
@slow66
gotta get a line driver :|
https://smile.amazon.com/Peripheral-PAC-LD10-Driver-Booster/dp/B003LWV77Y
cheaper on ebay.
Amazon.com: Eightnoo RCA Male to RCA Male - Male to Male RCA Coupler Plug Adapters Connector, Pack of 5 : Electronics
Buy Eightnoo RCA Male to RCA Male - Male to Male RCA Coupler Plug Adapters Connector, Pack of 5: Connectors & Adapters - Amazon.com ✓ FREE DELIVERY possible on eligible purchases
smile.amazon.com
tap either acc or amp wire to power it
Click to expand...
Click to collapse
Douglas_D said:
Another alternative line driver that others have used that has Front/Rear/Sub in/out
https://www.amazon.com/dp/B07PJ2KZ63/ref=cm_sw_em_r_mt_dp_MMG5JVGQ6NBM5F3S729Q
Click to expand...
Click to collapse
Nice, I just ordered this one to boost up my sub output:
Install Bay - Line Driver/Line Output Converter 2 Channel - Retail Pack (IBR67), Display Products https://www.amazon.ca/dp/B01M0A124S/ref=cm_sw_r_apan_glt_i_AJGJF11KVW9Y84S2RE8Y?_encoding=UTF8&psc=1
But I really like that 3 way one idea too hmmmm.....
The Subwoofer rca output in the manual indicates it at .5 volt. Most mid model head units deliver 3-5 volt output as you may already know. The best solution is to purchase a D.S.P or a crossover, etc. Line drivers usually have alot more than 1% THD. Most name brand types of car audio have become real affordable. I use a Rockford Fosgate 3.sixty.3 that allows voltage adjustment from 2-8 volts of output. Also make sure you use a good quality rca cable that is insulated and is OFC. I use Stinger 8000 or 9000 rca cables and Sky High triple sheilded makes a good set . They make a drastic difference . I had to buy a Y rca splitter as the sub output only has one out.
opps i forgot some links
https://www.amazon.com/Stinger-SI8212-2-Channel-Audiophile-Interconnect/dp/B006AF53AG/ref=sr_1_1?dchild=1&keywords=stinger+8000&qid=1633400565&sr=8-1
https://www.amazon.com/gp/slredirect/picassoRedirect.html/ref=pa_sp_atf_aps_sr_pg1_1?ie=UTF8&adId=A0777206REMGO6K8CEOP&url=%2FPRV-PRO-Electronic-Crossover-Output%2Fdp%2FB07YCV88VY%2Fref%3Dsr_1_2_sspa%3Fdchild%3D1%26keywords%3Dcrossover%26qid%3D1633400641%26sr%3D8-2-spons%26psc%3D1%26smid%3DA2CMBKBPWFWAHW&qualifier=1633400641&id=810613280838192&widgetName=sp_atf
Rockford Fosgate 3Sixty.3
Programmable 8-channel digital signal processor
www.crutchfield.com
The Epicenter® by AudioControl (Black)
Bass restoration processor
www.crutchfield.com
I have the same issue. I have an S8 Standard in dash. I cannot get any "Subwoofer" output from the unit. IF I connect any 2 channels from the unit to the subs amp. It works only after I have adjusted the Bass settings in the eq. But I don't have control over the Sub sounds really. However, But if I connect the single RCA "Sub Out" from the back of the Atoto S8 unit. I get absolutely no output. So I got a T splicer and connected the single Sub Out to Both RCA inputs on the amp. Still nothing. I know its only .2v output from the head. The amps input sensitivity is .250v-6v. Its a Nakamichi NKMD60.4 4 Channel amp, Bridgeable. 1500watts max. Connected to a Polk Audio DB+ 8 Inch 750 Watt 4 Ohm DVC.
But I should hear something. The gain on the amp is maxxed out. And My amp requires two channel inputs. But the head only has 1 RCA "Sub Out". So what am I missing? Is the power from the HU not enough? Or do I need a Line Booster? Or am I missing another step I don't know about. I checked the HU Sub Settings and the frequencies are within range. But still no output from that Sub jack on the back. I have a PAC LD-10 Ground Loop Isolator Adjustable Line Driver Signal Booster+10X Preamp on order. Should be here Tuesday. Im hoping this will solve the problem. Any Ideas?
JRShreds said:
I have the same issue. I have an S8 Standard in dash. I cannot get any "Subwoofer" output from the unit. IF I connect any 2 channels from the unit to the subs amp. It works only after I have adjusted the Bass settings in the eq. But I don't have control over the Sub sounds really. However, But if I connect the single RCA "Sub Out" from the back of the Atoto S8 unit. I get absolutely no output. So I got a T splicer and connected the single Sub Out to Both RCA inputs on the amp. Still nothing. I know its only .2v output from the head. The amps input sensitivity is .250v-6v. Its a Nakamichi NKMD60.4 4 Channel amp, Bridgeable. 1500watts max. Connected to a Polk Audio DB+ 8 Inch 750 Watt 4 Ohm DVC.
But I should hear something. The gain on the amp is maxxed out. And My amp requires two channel inputs. But the head only has 1 RCA "Sub Out". So what am I missing? Is the power from the HU not enough? Or do I need a Line Booster? Or am I missing another step I don't know about. I checked the HU Sub Settings and the frequencies are within range. But still no output from that Sub jack on the back. I have a PAC LD-10 Ground Loop Isolator Adjustable Line Driver Signal Booster+10X Preamp on order. Should be here Tuesday. Im hoping this will solve the problem. Any Ideas?
Click to expand...
Click to collapse
hey I am in the same boat with the S8 premium, any luck with the booster? and where do you mount it by the amp? or by the head unit?
Hay All, I bought an Android Q92_00020_V001 for my 2010 Subaru Outback with a Hardman Kardon and amp under the passenger seat. DHGate.com sent me the wrong wire harnesses and they are imposable to contact. Does anyone know where I should go the get the right wire harness for my car?
Hay guys, so the Nesson harness works fine. The amp for the Hardmon Kardon was not getting power. The plug to the amp needed power to the pink wire on the blue wire on the antenna harness. Is there a harness for the amp plug by the radio?
So I have a TS10 Headunit and on the main harness they gave me is a red and white RCA cable marked FL Out FR Out and I guess it's in charge on my Onstar so I can here it. The only place to plug it in was on the seperate mini harness running out of the back also Labeled FL Out FR Out. It works but I can barely hear the onstar audio. Is there a way to adjust the volume? Is it plugged into the right Jack's? The inky other red and white RCA is Aux In and when I plug it into that I get no audio. It's weird that the rca plugs marked FL out and FR Out are going to a RCA jack on the back of the TS10 Also labeled FL Out and FR Out. You think you'd be plugging it into a in not a out lol
Hi folks,
I bought this unit a while back and still have not been able to get any audio output from it.
https://www.aliexpress.com/item/1005002567795418.html
It's a V3 Pro with the SDM450, in the maximum configuration (6G+128G). It came with a RAISE CANBUS controller, so I've set it to all the various applicable vehicle choices in the factory settings and I still can't get any audio out. All connectors are plugged in, except one from the Junsun harness, which goes to nothing on the factory side. But the CANBUS cable is plugged in, so it should all be working, but still can't get audio out. I reached out to support, they suggested connecting the RCA cables from the harness to the Junsun unit's RCA AUX IN connections, but that doesn't do anything different.
Any suggestions? I feel like I may be missing a JBL specific harness or something, but everything I look up shows the same harness I have.
Best,
wtcnbrwndo4u