Related
Thanks to:
Easyloy for Recovery
Ampher for idea
rgusev for bring to idea life
alximiktik for bring needed files
Flashing ROM with QFIL:
Getting ready:
Download and install on your PC:
vcredist_x86.zip
QPST_2.7.422.ZIP
Qualcomm_USBDriver_2.1.0.5.zip or Qualcomm_USB_Drivers.zip
Turn off your Vibe P1.
Hold Volume Up key and plug in USB cable conected to PC.
Open Device Manager on PC (press win+r and type "mmc devmgmt.msc" without quotes) then seek Qualcomm Lenovo HS-USB QDLoader 9008 in COM & LPT ports.
If you can see Qualcomm Lenovo HS-USB QDLoader 9008, you are ready to flash!
Flashing ROM:
Downoad QFIL ROM ( for exampe one of this: https://yadi.sk/d/hY3kNWJGrnpCU?ncrnd=5389 ) and unpack it.
Find QFIL in your Stary menu and launch it.
Select Qualcomm Lenovo HS-USB QDLoader 9008 (COM*) port by using "Select Port..." button
Click "Browse..." near "Programmer patch" field and select prog_emmc_firehose_89**.mbn file from the ROM's folder.
Click "Load XML…" and select "rawprogram0*.xml" file and then select "patch0.xml" file.
Press "Download" button and wait untill it ends (reboot or "ready" message).
If "ready" message appears and device does not go to reboot, then hold Volume UP + Power buttons for ~12 sec.
Flash unlocked bootloader & recovery:
Read "Flashing ROM" manual
Download P1a42_S272_160506_ROW_QPST (+uBL +Recovery + Root +region ) and unpack it.
If you have different ROM installed, then flash S272 (by selecting rawprogram0.xml) otherwise go to the next step.
Flash unlocked bootloader (by selecting rawprogram_unlock.xml) and reboot into ROM.
Open developers options and select "OEM unlock".
Also you can check Bootloader status by rebooting to bootloader and typing "fastboot oem device-info" (without quotes), if it still locked, then type "fastboot oem unlock-go" (without quotes).
After (and only then) bootloader will be unlocked you can flash custom recovery by one of following ways: by QFIL, selecting rawprogram_twrp.xml or bootloader (fastboot flash recovery recovery_twrp.img).
When recovery is flashed, you can get into it by holding Volume UP + Volume DOWN keys while booting or using "adb reboot recovery" console command (without quotes).
Advanced flash unlocked bootloader & recovery:
BootLoader unlock:
Download file: emmc_appsboot.zip
Unzip.
Add listed files from QFIL-ROM to the same folder:
prog_emmc_firehose_8936.mbn
gpt_main0.bin
gpt_backup0.bin
rawprogram0.xml
patch0.xml
Run rawprogram0-fix.bat
Flash using QFIL, by selecting rawprogram0_aboot.xml.
Sometimes you need to do extra staff:
Open developers options and turn on:
ОЕМ unlock
USB debugging
Download: unlock-bl.zip
Unzip.
Plug USB cable and run unlock-bl.bat
wait until "Ready!" or the window disapire
Ready!
Custom recovery (TWRP):
Method one, fastboot:
Download: TWRP-FB.ZIP
Unzip.
Run rec-inst.bat
Method two adb(Root needed):
Download: TWRP.ZIP
Unzip.
Run rec-inst.bat
Root (SuperSU):
If you suscesfully unlocked bootloader and flashed recovery then you can:
download latest SuperSU
Put it to you sdcard (do not unpack it!)
Reboot to recovery and install ZIP.
Region:
To find out which region is set dial ####5993# or ####59930# using stock dialer
To change region:
Put easyimage.zip to root of SDCard
Dial ####682# using stock dialer
To get back to stock (for updating, etc.):
Flash stock ROM with QFIL.
You can use s272 listed above, but you also need to download, unzip and change rawprogram0.xml file before flashing to get stock recovery!
Is this the chinese version or the ROW? As far I know VIBEUI is for China.
If it's ROW I'll try it.
Teddy. said:
Is this the chinese version or the ROW? As far I know VIBEUI is for China.
If it's ROW I'll try it.
Click to expand...
Click to collapse
It's ROW! ROW also based on Vibe UI, but china ROMs has newer versions.
Any way to not install TWRP as I don't need it?Also I'll flash it when I get home.
Sent from my Lenovo P1a42 using XDA-Developers mobile app
Teddy. said:
Any way to not install TWRP as I don't need it?Also I'll flash it when I get home.
Click to expand...
Click to collapse
You can't install root on 6.0 without TWRP, but if you don't need it, woy also don't need to unlock BL, so you cat just flash ctock ROM.
Do I need to wipe my data or not? (I'll still get a backup, but ya know, just to get a titanium backup done.
Teddy. said:
Do I need to wipe my data or not? (I'll still get a backup, but ya know, just to get a titanium backup done.
Click to expand...
Click to collapse
You don't need to do any backup. But if you come to 6.0 from 5.1, you better do!
I flashed ROM everything went good, next thing I flash twrp, works, installed supersu and now I'm left with a phone without OS. I cannot get into download mode using the volume up + usb method and also I can get into the recovery. What can I do?
EDIT: After about 26 hours of just non-stop searching I finally got it flashed again.It was a painful experience but if somebody wipes the /system partition, don't hesistate to pm to help you come back on track.
Thanks for the great tutorial !
What is the difference between flashing unlocked bootloader & recovery: the easy way and advanced ?
Or there is no and both mkethods lead to same end ?
pabgar said:
What is the difference between flashing unlocked bootloader & recovery: the easy way and advanced ?
Or there is no and both mkethods lead to same end ?
Click to expand...
Click to collapse
They are lead to the same end but using different methods: manual, auto, with root or without, etc.
Can i root it without unlocking bootloader???
deadman220 said:
Can i root it without unlocking bootloader???
Click to expand...
Click to collapse
You can root only 5.1. Unlocked bootloader is the only way for 6.0 ROW ROMs.
Is there a way to lock it back or it's permanent?
deadman220 said:
Is there a way to lock it back or it's permanent?
Click to expand...
Click to collapse
You are not unlocking bootloader, you just flashing already unlocked one. So you can just flash it back!
I must say that after Marshmallow update, Vibe P1 is the best smartphone I had ever
Smooth working, great battery life, no problems at all.
After flashing TWRP and applying super su I am struck at Lenovo logo tried clearing cache and dalvik cache too still same
Is fingerpint unlock working on MM after root ?
GPSSlovakia said:
Is fingerpint unlock working on MM after root ?
Click to expand...
Click to collapse
Yes! And I'm using it on rooted ROM and with unlocked BL. But there is one little caveat: you can't unlock device with your finger for first time after reboot (it is MM feature). But after first time it working fine!
Thx for this awesome work .. ur amazing bro
---------- Post added at 11:00 AM ---------- Previous post was at 10:32 AM ----------
I want to ask about how to install updates after recovery .. i can't install updates right now after recovery
MoemenMoemen said:
I want to ask about how to install updates after recovery .. i can't install updates right now after recovery
Click to expand...
Click to collapse
You need to go back to full stock, it's the only way to get OTA.
Please look at "To get back to stock (for updating, etc.):" at first post (just updated it)!
NO DEEP SH!T GUIDE TO UPGRADE BOOTLOADER--Yes this is what it says!
A short, Simple, No Questions ask guide to Upgrade bootloader without using fastboot or a PC and without losing your Internal Storage Data.
Steps:
Assuming that you are on OLD bootloader right now, already using OFFICIAL TWRP (compatible with old bootloader only).
Flash a rom which supports Block Based OTA or Stock ROM(oos 2.X.X). (I used PURITY ROM as i was having that only with me)
Explaination: Make sure that you are already running a rom which was using a block based OTA to install (those which have files compressed in a system.img/dat file, roms compiled by me (DU/Tesla/AICP/Broken) doesnt have it as i wanted all files to be easily extractable. Stock Oxygen OS zip scans for block size etc so its recommended you use a rom with block based ota installation)
Make sure you are having "OEM unlock" and "ADB/USB debugging" enabled in Developer options (if not, enable them first!)
Reboot to recovery > Go to MOUNT section and make sure all partitions are mounted) > Go to INSTALL and flash THIS STOCK ROM ZIP > when flashing is completed, Click on Back Button and Go to the main menu of TWRP and click on INSTALL > Click on Install/Flash image option and flash this NEW TWRP > Then click on REBOOT TO RECOVERY > Then click on REBOOT SYSTEM.
Let Stock rom boot first then enable "ADB/USB Debugging" and "oem unlock" in Developer Options
Reboot to Recovery and Flash This SuperSu Zip > Then Reboot System.
And You are done!
Now you are free to flash Any ROM or Kernel (which supports New Bootloader).
Side note:
If you are already in Trouble - unable to boot recovery/fastboot etc. then follow this Mega Unbrick Guide to Unbrick your device, (this guide will restore your device back to old LP Bootloader then follow the above guide to upgrade to New Bootloader.
I could boot into the stock os but couldn't get twrp to install...
After installing twrp and rebooting to recovery, I got a glimpse of the twrp interface, the screen flashed and then rebooted, I am back to stock recovery
So yeah went back and did the blu_spark install from PC
three0s said:
I could boot into the stock os but couldn't get twrp to install...
After installing twrp and rebooting to recovery, I got a glimpse of the twrp interface, the screen flashed and then rebooted, I am back to stock recovery
So yeah went back and did the blu_spark install from PC
Click to expand...
Click to collapse
Follow the steps properly and it will work as expected
These steps are tried and tested by many peeps and works.
Back to old!
Well this works good enough,
But can u provide a zip for going back to old bootloder, i know that flashing the whole oos 2.x.x rom does the trick but flashing a small file would be better and would save some memory and some seconds while flashing.
I'm on step 4, trying to flash the latest stock rom (OOS 3.1.4 which download from Oneplus site) and constantly gives me an error 7 during the installation. I tried to full wipe all sections, re-flash but the same error. I tried to change the "updater-script" erasing the commands, re-flash but the same error. I tried the mega unbrick guide and next your steps but again the same error. I can't understand what is going on. Everytime I manage to return to OOS 2.2.1 or a ROM with 6.0.1 version but I can't update the bootloader succesfully.
Any suggestion?
Good afternoon,
@CheckYourScreen You wrote "enable ADB/USB debugging". Why should I enable adb/usb if I have no contact with the PC? If I'm wrong so correct me please.
@three0s Maybee my Note helps you. Your OPX is oem unlockt, adb / usb driver installed so reboot in fastboot. With "fastboot devices" is your OPX hopefully detected from your PC. Now write "fastboot oem unlock". "fastboot erase recovery" will erase the Stock-Recovery. With "fastboot flash recovery your-twrp.img" the new one is installed. When you write now "fastboot reboot" so is the new Recovery installed and your System started but when you write "fastboot boot your-twrp.img" you make a reboot directly in the twrp-Recovery and you can install supersu and so on. Good Luck and, yes, my english is poor. Sorry.
mahalo
Hello guys, my phone one plus 5 has stopped working when I wanted to change to a ROM called (Resurrection Remix) which does not give any problem according to the users of the forum. I have another version of (Resurrection Remix) in my ONE PLUS TWO and without any problem. The topic is the following I have done all the steps as they are indicated but at the time of restarting the phone when the installation is finished, a load loop has started and never ends. I've been searching the internet all day to unbricke the phone but it's impossible, I try to install different ROMs and I still get nothing.
Sorry for my bad English, my language is Spanish
Link video YOUTUBE : https :// w w w. youtube .com/watch?v=0prJgT2erSU Delete the spaces of the link, being a new user does not let me post links
I had this same problem, and can almost promise this will unbrick it. Unfortunately this will put your phone back to how you had it when you first unboxed it, but it will work again.
1. Download the official OOS 4.5.5 zip
2. Wipe cache/dalvik/system/data in TWRP and flash the stock zip.
3. Within TWRP, flash the stock OP recovery image. You do this the same way as a zip, but click images in the bottom right while browsing for the file. Choose recovery as the partition of course.
4. Go to TWRP power options and boot to Bootloader/fastboot
5. Hook up to your PC and run the command to lock your bootloader "fastboot oem lock" (this will wipe your device and encrypt it again. I believe at this point the stock recovery will come up, do another factory reset to be safe.
6. Start your phone, at this point it should load up like new and all you have to do is unlock bootloader again and flash TWRP through fastboot so you can root again.
I don't have an answer for why ResurrectionRemix bricked your phone, but it did for me too. I followed the decrypt instructions to the T, but the same thing happened and I spent an entire Saturday trying to get my phone running again. I would guess that ResurrectionRemix is not to blame, and any other Lineage based ROM would end in the same result.
Good luck.
ArkAngel06 said:
I had this same problem, and can almost promise this will unbrick it. Unfortunately this will put your phone back to how you had it when you first unboxed it, but it will work again.
1. Download the official OOS 4.5.5 zip[/URL]
2. Wipe cache/dalvik/system/data in TWRP and flash the stock zip.
3. Within TWRP, flash the stock OP recovery image.[/URL] You do this the same way as a zip, but click images in the bottom right while browsing for the file. Choose recovery as the partition of course.
4. Go to TWRP power options and boot to Bootloader/fastboot
5. Hook up to your PC and run the command to lock your bootloader "fastboot oem lock" (this will wipe your device and encrypt it again. I believe at this point the stock recovery will come up, do another factory reset to be safe.
6. Start your phone, at this point it should load up like new and all you have to do is unlock bootloader again and flash TWRP through fastboot so you can root again.
I don't have an answer for why ResurrectionRemix bricked your phone, but it did for me too. I followed the decrypt instructions to the T, but the same thing happened and I spent an entire Saturday trying to get my phone running again. I would guess that ResurrectionRemix is not to blame, and any other Lineage based ROM would end in the same result.
Good luck.
Click to expand...
Click to collapse
WOW Many thanks, my friend, finally my phone has revived. Again thank you very much has served me very much.:good:
Hello Friends,
I have seen several Youtube videos and read the thread of xda senior member the rooter to unroot and revert the oneplus 3t to stock. The senior member guided very beautifully to have the stock ROM with or without the bootloader unlocked and fix DM-verity issue.
The following guide is not my invention, I have taken the sources from internet and xda site. The difference is that I used TWRP to flash official oxygenOS zip file of 4.1.6 and I am surprised that this file also flash stock recovery, therefore I did not flash stock recovery and proceeded further for full wipe and lock bootloader. In the middle of thread, I also alerted and said that if stock recovery is not flashed after installing zip of 4.1.6, then it is mandatory to flash stock recovery from fastboot before locking bootloader, otherwise your devices will be bricked.
1) Flash Oxygen OS 4.1.6 through latest TWRP 3.1.1.2 and remember to wipe system, cache, data and delvic cache excluding internal storage before flashing. Do not wipe completely otherwise you will have TWRP installed again and you will have to flash stock recovery through fastboot method.
Link for official TWRP for oneplus 3t: https://dl.twrp.me/oneplus3t/twrp-3.1.1-2-oneplus3t.img.html
Link for official stock recovery for oneplus 3t: http://downloads.oneplus.net/oneplus-3t/oneplus_3t_oxygenos_4.1.7/ , here go down the page and click on "Download Oxygen Recovey (Optional)"
After booting successfully, go to setting and tap the build number 7 times to enable advanced reboot and usb debugging and connect your mobile with your PC and make sure that you have adb drivers installed on your PC.
Now, extract the folder of fastboot and press the right click of mouse while pressing shift button. Basically you have to open command prompts. Now type: adb reboot recovery and hit enter.
2) Your phone should boot into oxygen stock recovery and if it does not boot to stock recovery then flash stock recovery from fastboot.
2) Now your oneplus 3t is having Oxygen OS 4.1.6 with stock recovery but having DM verity issue. Now, full wipe ( select erase everything) in stock recovery and reboot. This wiping through stock recovery may be extra step (locking the bootloader will erase your data completely) but I did this to avoid any problem.
3) Now, sideloaded the same file i.e. oxygen OS 4.1.6 or OOS 4.1.7 through the following command:
adb sideload OTA.zip
where OTA is zip file downloaded from oneplus site for oneplus 3t and renamed it as OTA
(For this, you will have to go to stock recovery and select the option of "install from ADB" then a pop up screen will show you that you are in sideload mode. But remember that sideloading the OS is a slow process; so keep patience and do not remove cable in the middle of installation otherwise your device will be bricked.)
4) Now, lock the bootloader from the command in fastboot mode:
fastboot oem lock
after entering the command in fastboot mode, a confirmation will be asked to lock the bootloader for Yes or No, confirm from the volume keys and let boot the phone automatically and wait to finish.
5) If you sideloaded the OOS 4.1.6 in step 3 then you will see the update notification of OOS 4.1.7 which is about 450MB, download it ,install it and reboot.
6) Enjoy............the stock
Thanks to guides on youtubes and xda site.
Please note that if you follow these steps, you will not have any issues because I have done again and again without any issues but I do not take any responsibility of bricked devices if you perform wrong method or skip any thing.
Please hit the like if find this useful, it is absolutely freeeeee.............
What if I currently have no OS installed? Does that matter?
sandeep_kumar said:
Hello Friends,
I have seen several Youtube videos and read the thread of xda senior member the rooter to unroot and revert the oneplus 3t to stock. The senior member guided very beautifully to have the stock ROM with or without the bootloader unlocked and fix DM-verity issue.
The following guide is not my invention, I have taken the sources from internet and xda site. The difference is that I used TWRP to flash official oxygenOS zip file of 4.1.6 and I am surprised that this file also flash stock recovery, therefore I did not flash stock recovery and proceeded further for full wipe and lock bootloader. In the middle of thread, I also alerted and said that if stock recovery is not flashed after installing zip of 4.1.6, then it is mandatory to flash stock recovery from fastboot before locking bootloader, otherwise your devices will be bricked.
1) Flash Oxygen OS 4.1.6 through latest TWRP 3.1.1.2 and remember to wipe system, cache, data and delvic cache excluding internal storage before flashing. Do not wipe completely otherwise you will have TWRP installed again and you will have to flash stock recovery through fastboot method.
Link for official TWRP for oneplus 3t: https://dl.twrp.me/oneplus3t/twrp-3.1.1-2-oneplus3t.img.html
Link for official stock recovery for oneplus 3t: http://downloads.oneplus.net/oneplus-3t/oneplus_3t_oxygenos_4.1.7/ , here go down the page and click on "Download Oxygen Recovey (Optional)"
After booting successfully, go to setting and tap the build number 7 times to enable advanced reboot and usb debugging and connect your mobile with your PC and make sure that you have adb drivers installed on your PC.
Now, extract the folder of fastboot and press the right click of mouse while pressing shift button. Basically you have to open command prompts. Now type: adb reboot recovery and hit enter.
2) Your phone should boot into oxygen stock recovery and if it does not boot to stock recovery then flash stock recovery from fastboot.
2) Now your oneplus 3t is having Oxygen OS 4.1.6 with stock recovery but having DM verity issue. Now, full wipe ( select erase everything) in stock recovery and reboot. This wiping through stock recovery may be extra step (locking the bootloader will erase your data completely) but I did this to avoid any problem.
3) Now, sideloaded the same file i.e. oxygen OS 4.1.6 or OOS 4.1.7 through the following command:
adb sideload OTA.zip
where OTA is zip file downloaded from oneplus site for oneplus 3t and renamed it as OTA
(For this, you will have to go to stock recovery and select the option of "install from ADB" then a pop up screen will show you that you are in sideload mode. But remember that sideloading the OS is a slow process; so keep patience and do not remove cable in the middle of installation otherwise your device will be bricked.)
4) Now, lock the bootloader from the command in fastboot mode:
fastboot oem lock
after entering the command in fastboot mode, a confirmation will be asked to lock the bootloader for Yes or No, confirm from the volume keys and let boot the phone automatically and wait to finish.
5) If you sideloaded the OOS 4.1.6 in step 3 then you will see the update notification of OOS 4.1.7 which is about 450MB, download it ,install it and reboot.
6) Enjoy............the stock
Thanks to guides on youtubes and xda site.
Please note that if you follow these steps, you will not have any issues because I have done again and again without any issues but I do not take any responsibility of bricked devices if you perform wrong method or skip any thing.
Please hit the like if find this useful, it is absolutely freeeeee.............
Click to expand...
Click to collapse
How can i find one plus 3t recovery I cant find both twrp and one plus official recovery.
Hi all!
I have tryed to flash Android Q on my Redmi Note 7 (Global) everything seemed to go smooth till i rebooted and the deviced got stuck in fastboot mode, i tryed to flash TWRP, it goes OKAY but if i reboot i cant access recovery anyway.
I also tryed to use "fastboot boot recovery.img", it does send the image but fails to boot into recovery saying "failed to load/authenticate boot image..."
Am i doing something wrong? How can i solve this?
I thought of MiFlash Tool, but there are many version and some seems not to work properly can anyone provide a working link?
(Ofc, my bootloader is unlocked etc)
Thanks a lot
After you flash TWRP you can't access via command, because MIUI will re-write the recovery again once you restart, first flash the TWRP (fastboot flash recovery the-name-of-the-file.img) after that you must reboot to recovery manually by holding together "Volume Up + Power" until you see the MI logo, release "Power" button but keep pressing "Volume Up" until you see the recovery, after you are in TWRP, (mount the internal storage (Data) or if you already copied OrangeFox Recovery Zip to device) then just flash OrangeFox R10_2, it will reboot itself after that to the recovery again and that's all, you will have a custom recovery ready.
Now, if you already tried to flash the ROM and everything went wrong, I guess your device is bricked, now you need a FASTBOOT ROM for your device (if it's complete global = PFGMIXM / because there's global europe too, that's PFGEUXM) and the MiFlashTool, unzip the Fastboot ROM, open the MiFlashTool, load the ROM Folder in the tool while the phone is connected to the PC, and then just flash it, steps with images are in Xiaomi site, here's the link Fasboot Method
ps: the tool have below one option to flash and re-lock the bootloader, it will be selected by default, leave it like that if you want to re-lock it, or change it to clean all to leave it unlock it
BlackGarnett said:
After you flash TWRP you can't access via command, because MIUI will re-write the recovery again once you restart, first flash the TWRP (fastboot flash recovery the-name-of-the-file.img) after that you must reboot to recovery manually by holding together "Volume Up + Power" until you see the MI logo, release "Power" button but keep pressing "Volume Up" until you see the recovery, after you are in TWRP, (mount the internal storage (Data) or if you already copied OrangeFox Recovery Zip to device) then just flash OrangeFox R10_2, it will reboot itself after that to the recovery again and that's all, you will have a custom recovery ready.
Now, if you already tried to flash the ROM and everything went wrong, I guess your device is bricked, now you need a FASTBOOT ROM for your device (if it's complete global = PFGMIXM / because there's global europe too, that's PFGEUXM) and the MiFlashTool, unzip the Fastboot ROM, open the MiFlashTool, load the ROM Folder in the tool while the phone is connected to the PC, and then just flash it, steps with images are in Xiaomi site, here's the link Fasboot Method
ps: the tool have below one option to flash and re-lock the bootloader, it will be selected by default, leave it like that if you want to re-lock it, or change it to clean all to leave it unlock it
Click to expand...
Click to collapse
Thank You!
Unluckly even manual rebooting didnt work so i had to use the MiFlash Tool and the Global Rom provided by your link and everything went good! Thanks Again!
Have a nice day
Regards
Hi dears! Just trying to sum up in case someone end up here just like me: Got stuck on fastboot. What solved was format data partition via orange recovery.
BlackGarnett said:
After you flash TWRP you can't access via command, because MIUI will re-write the recovery again once you restart, first flash the TWRP (fastboot flash recovery the-name-of-the-file.img) after that you must reboot to recovery manually by holding together "Volume Up + Power" until you see the MI logo, release "Power" button but keep pressing "Volume Up" until you see the recovery, after you are in TWRP, (mount the internal storage (Data) or if you already copied OrangeFox Recovery Zip to device) then just flash OrangeFox R10_2, it will reboot itself after that to the recovery again and that's all, you will have a custom recovery ready.
Now, if you already tried to flash the ROM and everything went wrong, I guess your device is bricked, now you need a FASTBOOT ROM for your device (if it's complete global = PFGMIXM / because there's global europe too, that's PFGEUXM) and the MiFlashTool, unzip the Fastboot ROM, open the MiFlashTool, load the ROM Folder in the tool while the phone is connected to the PC, and then just flash it, steps with images are in Xiaomi site, here's the link Fasboot Method
ps: the tool have below one option to flash and re-lock the bootloader, it will be selected by default, leave it like that if you want to re-lock it, or change it to clean all to leave it unlock it
Click to expand...
Click to collapse
The link you provided says 404 not found.
So here are the links that work:-
Redmi note 7:- https://c.mi.com/thread-2643823-1-0.html
Redmi note 7 pro:- https://forum.xda-developers.com/redmi-note-7-pro/how-to/miui-11-public-beta-violet-t3973921
Hope that helps.
Strange51 said:
The link you provided says 404 not found.
So here are the links that work:-
Redmi note 7:- https://c.mi.com/thread-2643823-1-0.html
Redmi note 7 pro:- https://forum.xda-developers.com/redmi-note-7-pro/how-to/miui-11-public-beta-violet-t3973921
Hope that helps.
Click to expand...
Click to collapse
You have a smart phone! Don't want to accept redmi note 7 pro (violet) rom to be flashed to note 7 (lavender) phone.
Try to find here miui rom for your phone: https://xiaomifirmwareupdater.com/