Led notification not at all working - ZTE Axon 7 Questions & Answers

Hi I brought a ZTE axon 7. My led notification doesn't turn on. I haven't seen it on even for charging or SMS or email. . Even in settings_display -notification led options are on . Tried hard resetting nothing seems to work. Am I doing anything wrong please help

shiva49 said:
Hi I brought a ZTE axon 7. My led notification doesn't turn on. I haven't seen it on even for charging or SMS or email. . Even in settings_display -notification led options are on . Tried hard resetting nothing seems to work. Am I doing anything wrong please help
Click to expand...
Click to collapse
Return the phone, hardware problem.

Related

Yellow led always on... Jam's bug?

Hi guys!
Sometimes on my Jam the yellow led is always on...
I'm sure to not have message to read or active appointments...
The only workaround is to do a softreset! :-(
FOr example:
yesterday the led was green... an appointment reminder appens with sound notification (dinner from 20 to 23).
The PDA was turned off but the notification ring sound and the led became yellow. The display was still off.
I turn the pda on and I see the bell symbol on the bottom right corner.... I tap on it and I see the reminder for my appointment.
After that the led don't becomes green!
I tryed to show the appointment in the calender ecc... but the led was stilll yellow.
I'm not expert and I thinked that the led will be green after the 23pm when my appointment will be ended...
This morning the led was still f..... yellow!!!
I made soft reset and now it's ok but I don't understand why!
How does the reminder notifications works?
Are you using phonealarm or alarmtoday?
I've noticed sometimes the only way to cancel the yellow led is to load the sms/email app (ie check your messages), regardless of what caused the yellow led, and whether or not you have a new message.
Anyone concur?
V
I installed PohoneAlarm but i removed it and now I'm usign PPCProfilePro...
I've noticed the led anomalies and the only cure I've come up with is to soft reset.
whenever the yellow gets stuck i go to settings->sounds & notifications
then click on notification tabs then sounds tab then notification tab again..
that should bring back the green led
ceekay said:
whenever the yellow gets stuck i go to settings->sounds & notifications
then click on notification tabs then sounds tab then notification tab again..
that should bring back the green led
Click to expand...
Click to collapse
Excellent! It worked fine for me.
Thanks
vijay555 said:
Anyone concur?
Click to expand...
Click to collapse
I remember that! :lol: 8)
The bug must be from windows mobile. If you, when getting a notification popup, tap a button and hold it until the LED did blink once again and then release the button, the bug shouldn't appear. The solution I use is to restrict the blinking to a certein time period, I think you can set it to 90 minutes or something. I use PocketZenPhone to set this. Therefore, whenever this bug appears, it's gone after 90 minutes.

HELP!! SMS+email vibration dont

HELP HELP HELP
can anyone save me?
cause i am deaf(so SE x1 is a great choice but WM6.....) i want a phone vibration if recieve SMS message of incoming email.
i even setted it up to vibrate+ led lighting but it dont!!!
I tried all tweakprograms but they dont support it.
so i must regedit it i think, can anyone help me?!?!??!
you could do me a very very big favor if you can help me.
You have it under Settings->Sounds and notifications, and then the Notifications tab.
on8a said:
You have it under Settings->Sounds and notifications, and then the Notifications tab.
Click to expand...
Click to collapse
already did that, im not so stupid like that.
i just 5 minutes ago did hard reset. it works again. that was really strange, i didnt changed it so much.
LED and vibration by sms recieve works again.
but vibration is still too short, with mozart tone.
how i make vibration stronger and longer? i prefer about 7 sec.
Well, I didn't really think you where stupid, but WM isn't really logical sometimes, so splitting phone and notifications settings isn't always obvious.
Don't know if there are any tweak settings for the length of vibrations, but using phoneAlarm you could change how it vibrates.
http://www.pocketmax.net
tttyto said:
how i make vibration stronger and longer? i prefer about 7 sec.
Click to expand...
Click to collapse
have the audio alert last for 7 seconds. The only problem I have is I like the phone to pulse vibrate, but it seems like WM just does a full burst.
I'm having the same issues. ROM is the one that OliNex posted,
It's set in Sounds and Notifications, however it doesn't vibrate. Phone calls do.
I'v tried hard reset, I've tried soft reset, I've tried reflashing, but no success. Is there a registry setting somewhere?
Thanks
UKTamo
PS: My right hand volume control slider, refuses to go above 0 ...

Can the LED flash?

Hello everyone - I'm new to this forum, and the world of Windows-powered phones in general. Still figuring out what my new Touch 3G (Jade) can really do!
One question to start with - in the old days, my Ericsson T68i flashed the green LED occasionally to let me know it was still switched on. Is there any way to get the Jade to do this?
I'm wondering the same thing and still figuring this out. Wish the manual was more helpful.
What I've learned so far is the LED if off under normal operation. It flashes green when there's a missed call or SMS waiting to be read. No LED for Bluetooth On. That's as far as I know.
I'm disappointed about missing network coverage led, missing bluetooth and gps led status...But i'm wondering, if i take a closer look at my jade it seems to be 2 leds, i'm wrong?
The "second one" is a light detector . Did you notice automatic backlight setting?
Jade does not flash for GSM, BT, WiFi, GPS. It only flashes for reminders, missed calls and messages.
But actually, I like it more. If I see LED flashing, there is something which needs my attention. You can see the active networks on the display status area.
There is flashing for battery low status as well
fenikso said:
The "second one" is a light detector . Did you notice automatic backlight setting?
Jade does not flash for GSM, BT, WiFi, GPS. It only flashes for reminders, missed calls and messages.
But actually, I like it more. If I see LED flashing, there is something which needs my attention. You can see the active networks on the display status area.
Click to expand...
Click to collapse
LED on my set does not flash even when there are unread messages or missed calls. I've soft reset several times, still no LED flashing. Any assistance ??
azahidi said:
LED on my set does not flash even when there are unread messages or missed calls. I've soft reset several times, still no LED flashing. Any assistance ??
Click to expand...
Click to collapse
Translate from a Dutch device:
Go to Settings => Sounds
Click Advanced
Click Tab: Notifications
And there you can set your Touch 3G aka Jade flash for diverent notifications.
In the top pull-down menu choose wathever you want and then select if you want a screennotification and/or a flashing LED.
Sincerely,
I cant understand.Where is that setting for the LED ?
When you've reached the menu Tom pointed out, just use the pull down menu tha'ts next to 'event' (translated from dutch, anyway...first line) for lets say 'new text message' there you can choose if you want to use the led and/or the notification on your screen.
Tom Lenferink said:
Translate from a Dutch device:
Go to Settings => Sounds
Click Advanced
Click Tab: Notifications
And there you can set your Touch 3G aka Jade flash for diverent notifications.
In the top pull-down menu choose wathever you want and then select if you want a screennotification and/or a flashing LED.
Sincerely,
Click to expand...
Click to collapse
Thank you very much. How can I miss that ???
Om my device is like this
Settings - (personal tab) Sounds & Notification - (notifications tab) ... custimise from there on..
Anyone knows if the green light can be flashed when in Stand-by mode?
Really want to make it flashes since it's hard to tell if it's in stand by mode or switched off...
ippie said:
Anyone knows if the green light can be flashed when in Stand-by mode?
Really want to make it flashes since it's hard to tell if it's in stand by mode or switched off...
Click to expand...
Click to collapse
I'm not really sure if the LED can be flashed when in standby mode, I think the reason for this is to make the battery life longer
Thx for your reply.
I'm still looking for a solution to make the light flashes when stand by...
It's really hard to tell if it's in Stand-by or switch off...
Can't find any clue with the Registry...
Hope there's a solution...
led
Did you perform a word search in the registry
try a search on "led" maybe you can find some keys
Maybe nueLED could help.
Search it in the forum.

[Q] LED Notification

pls help me on LED Notification....
more info about ur led problem, please..
when the phone goes to sleep mode, the led stop blinking, for example when charging phone. got any solution to make led blink even when phone goes to sleep mode?
danz7 said:
when the phone goes to sleep mode, the led stop blinking, for example when charging phone. got any solution to make led blink even when phone goes to sleep mode?
Click to expand...
Click to collapse
yes, the same question, pls help!
it's an inherent problem to the x2. just visit the officila forum site on sony ricsson/sony mobile and you'll see that SE/SM doesn't have any plans on rectifying this simple problem.

LED indicator problem

Hi, Im using Light Manager,
LED blinking works fine when i get any notification, however if 2 notifications come in, the alternate LED function does not seem to work.
For example if I am charging then the LED is orange and then if i get an sms or something then the LED stops blinking and nothing shows.
Same if Im not charging and i get an sms, it blinks, but if i then get a missed call or email or something then LED stops blinking.
Alternate mode is already on in Light Manager settings.
What am i doing wrong? Do i have to disable something?
Thanks
bsm123 said:
Hi, Im using Light Manager,
LED blinking works fine when i get any notification, however if 2 notifications come in, the alternate LED function does not seem to work.
For example if I am charging then the LED is orange and then if i get an sms or something then the LED stops blinking and nothing shows.
Same if Im not charging and i get an sms, it blinks, but if i then get a missed call or email or something then LED stops blinking.
Alternate mode is already on in Light Manager settings.
What am i doing wrong? Do i have to disable something?
Thanks
Click to expand...
Click to collapse
mine dose that as well
Anyone any ideas?

Categories

Resources