Database Users

HELP: Installed ROM now no network

Hi all,
I am starting a new post as I could not post in the
[ROM](5.1.1 TouchWiz)Tazzy-aurora-Note3-Full note 5 port Stable T-6.1 (19-1-2016)
area, being new and all.
So I flashed:
1. Kernel_Cleaning_AudaxL_v2.9
2. [5.1.1]Tazzy-aurora.Note3.Full.Note5.Port.T-6.1.zip
and now my phone is not registering on the mobile network.
PLEASE HELP!!
Upon restarting I get a message at the top of Samsung screen logo in Red:
kernel is not SEANDROID enforcing.
Thanks
B.

Flash a stock firmware using odin. Try that, but you will lose everything.

MrHollywood said:
Flash a stock firmware using odin. Try that, but you will lose everything.
Click to expand...
Click to collapse
Which firmware? The same .zip file I used earlier?
Can you give link?
Thanks
B

babak.sufi said:
Which firmware? The same .zip file I used earlier?
Can you give link?
Thanks
B
Click to expand...
Click to collapse
I have used CWM recovery 6.0.4.7 to wipe and flash.

Try to flash the latest Modem and Bootloader with Odin, I think you can find them on Audax page. Good Luck!

Fatal4u said:
Try to flash the latest Modem and Bootloader with Odin, I think you can find them on Audax page. Good Luck!
Click to expand...
Click to collapse
And where is that please?

http://forum.xda-developers.com/galaxy-note-3/development/rom-n9005-audax-v9-0-t2847013
in the first post:
MODEM/BOOTLOADER LOLLIPOP Section
- - - Install with ODIN 3.09 - - - Turn off the phone and go in Download Mode
- MODEM/NON-HLOS in CP=MODEM_NON-HLOS_OJ2
- BOOTLOADER in BL=BL_N9005XXUGBOL3
- PERSIST in AP=PERSIST_LP_N9005

babak.sufi said:
Which firmware? The same .zip file I used earlier?
Can you give link?
Thanks
B
Click to expand...
Click to collapse
No, go to Samsung updates.com or Sam Mobile and download a firmware for your phone. Firmware is an orginal "rom" for your device From Samsung, and flash it using odin. Your problem could be with the efs files, I had that issue Too with my note 3, you should always back up Your efs files.
Goodluck!

The rom on the phone is probably not compatible with the phone's current modem and or bootloader.
I recommend flashing the latest stock rom via Odin, make sur everything works, then install twrp and a custom rom.

MrHollywood said:
Flash a stock firmware using odin. Try that, but you will lose everything.
Click to expand...
Click to collapse
After flashing an update from Sammobile via Odin you won't lose anything!
Sent from my SM-N9005 using Tapatalk

saszseb said:
After flashing an update from Sammobile via Odin you won't lose anything!
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
I know, I meant root and recovery.

MrHollywood said:
I know, I meant root and recovery.
Click to expand...
Click to collapse
Hi all,
Thanks for the tips.
I got 5.0 from Sammobile and flashed using Odin.
Cheers

babak.sufi said:
Hi all,
Thanks for the tips.
I got 5.0 from Sammobile and flashed using Odin.
Cheers
Click to expand...
Click to collapse
Congratulations! BTW a new Firmware has been released today in Israel.

Hi
Which firmware 5.0.1?

can someone help me get kitkat again on SM-G530AZ

can i downgrade from 5.1. to 4.4.?

Download 4.4...firmware from sammobile
And then> flash via odin...

minsetnaing said:
Download 4.4...firmware from sammobile
And then> flash via odin...
Click to expand...
Click to collapse
No it will damage IME

so then?

abooooood said:
No it will damage IME
Click to expand...
Click to collapse
so then?

GalaxyScar said:
so then?
Click to expand...
Click to collapse
No, I tested from 5.0.2 to 4.4.4.
Flash wipe >>system,data,caches and davilk from twrp
And then flash via Odin
All OK

minsetnaing said:
No, I tested from 5.0.2 to 4.4.4.
Flash wipe >>system,data,caches and davilk from twrp
And then flash via Odin
All OK
Click to expand...
Click to collapse
im at 5.1.1 and i cant find the the firmware for sm-g530az
do i need to be rooted to flash with odin?

GalaxyScar said:
im at 5.1.1 and i cant find the the firmware for sm-g530az
do i need to be rooted to flash with odin?
Click to expand...
Click to collapse
http://easy-firmware.com/index.php?a=browse&b=category&id=2993
First register or login and then you will get your firmware .
Please hit thank button.

minsetnaing said:
http://easy-firmware.com/index.php?a=browse&b=category&id=2993
First register or login and then you will get your firmware .
Please hit thank button.
Click to expand...
Click to collapse
thanks! lol i have to pay 15$?

minsetnaing said:
http://easy-firmware.com/index.php?a=browse&b=category&id=2993
First register or login and then you will get your firmware .
Please hit thank button.
Click to expand...
Click to collapse
i downloaded a file i found around here that someone shared. i got it from their google drive.
ALL_AIO_G530AZTUU3AOF5_G530AZAIO3AOF5_CL419809_QB5874412_REV00_user_low_ship_MULTI_CERT.tar.md5
i try to flash it with odin but it doesnt work?

GalaxyScar said:
i downloaded a file i found around here that someone shared. i got it from their google drive.
ALL_AIO_G530AZTUU3AOF5_G530AZAIO3AOF5_CL419809_QB5874412_REV00_user_low_ship_MULTI_CERT.tar.md5
i try to flash it with odin but it doesnt work?
Click to expand...
Click to collapse
Try it from odin . I think that will work fine.

minsetnaing said:
Try it from odin . I think that will work fine.
Click to expand...
Click to collapse
i tried but it failed. can you help me resolve this bro?
i wasn't rooted... now i am.
i'm also trying to get TWRP

GalaxyScar said:
i tried but it failed. can you help me resolve this bro?
i wasn't rooted... now i am.
i'm also trying to get TWRP
Click to expand...
Click to collapse
How to solve that i don't know.
But you can do that ....
Extract az firmware tar.md5
And then create tar file to system.ext4.mbn
And flash via odin
And other too....
Sorry my bad eng.....
Thank

Oreo for everyone

Just saw this. Anyone try it yet? Says it works for all US carriers.
https://lifehacker.com/how-to-get-the-galaxy-s8-android-8-0-oreo-update-ahead-1821878689
https://samsung.firmware.science/

Sir_Eagle said:
Just saw this. Anyone try it yet? Says it works for all US carrie rs.
https://lifehacker.com/how-to-get-the-galaxy-s8-android-8-0-oreo-update-ahead-1821878689
Click to expand...
Click to collapse
Came here looking for the same!
Sent from my SM-G955U using Tapatalk

Damn shame I can't get it to download.

Been on Oreo for a long while. Check it out, https://forum.xda-developers.com/galaxy-s8+/how-to/guide-oreo-beta-usa-snapdragon-s8-t3700907
PLEASE read, search. Likely your question and how to get started has already been answered, happy flashing!

Not going to try. I hear it works but it's a t mobile version. I'm going to wait for official Verizon OTA as is need to reload the nougat load to get the OTA later. Besides, that wipes the phone since it isn't an upgrade.

Running oreo and work liked a charm! just following the directions.

hmltnjrmy7 said:
Running oreo and work liked a charm! just following the directions.
Click to expand...
Click to collapse
Did you have to do a full reset or run it like update?

nbock01 said:
Did you have to do a full reset or run it like update?
Click to expand...
Click to collapse
Downloaded the ZIP. Placed on my sd card. Ran recovery. Installed zip. Took under ten mins. Rebooted itself. Once rebooted it was on Oreo with no reset, everything was the same. Super easy.

hmltnjrmy7 said:
Downloaded the ZIP. Placed on my sd card. Ran recovery. Installed zip. Took under ten mins. Rebooted itself. Once rebooted it was on Oreo with no reset, everything was the same. Super easy.
Click to expand...
Click to collapse
Which firmware update did you pull then?
CRA1
ZQKS
CRA5

nbock01 said:
Which firmware update did you pull then?
CRA1
ZQKS
CRA5
Click to expand...
Click to collapse
Was currently on BQL1. Downloaded the BQL1 to CRA1 zip.

hmltnjrmy7 said:
Was currently on BQL1. Downloaded the BQL1 to CRA1 zip.
Click to expand...
Click to collapse
Got around to it this morning. Worked perfectly!

hmltnjrmy7 said:
Was currently on BQL1. Downloaded the BQL1 to CRA1 zip.
Click to expand...
Click to collapse
There's CRA9 already samsung.firmware.science BQL1 to CRA9.

xdanilva said:
There's CRA9 already samsung.firmware.science BQL1 to CRA9.
Click to expand...
Click to collapse
Is that newer?

hmltnjrmy7 said:
Is that newer?
Click to expand...
Click to collapse
Yep.

xdanilva said:
Yep.
Click to expand...
Click to collapse
Do you have any recommendations on the easiest path to this build other than Odin back then applying?

hmltnjrmy7 said:
Do you have any recommendations on the easiest path to this build other than Odin back then applying?
Click to expand...
Click to collapse
Only BQL1 to CRA9 also if you don't wanna wipe don't flash the BQL1 csc.

xdanilva said:
Only BQL1 to CRA9 also if you don't wanna wipe don't flash the BQL1 csc.
Click to expand...
Click to collapse
THxs! So Odin back to BQL1 but do not flash the csc (check box) in odin.. and flash zip in recovery BQL1 to CRA9.

xdanilva said:
Only BQL1 to CRA9 also if you don't wanna wipe don't flash the BQL1 csc.
Click to expand...
Click to collapse
Worked like a charm!
Thxs

Took the gamble... on the boot up from odin back to BQL1 it corrupted my device storage.

Well crap, just got looking at my phone, looks like i had pulled the tmobile firmware file. Now pulling the full bql1 firmware for verizon from sammobile... 3.6 gb

Downgrade to Marshmallow

Hi, I want to downgrade back to Android 6.0.1 Marshmallow by flashing it through Odin. But when it starts flashing, the box says FAIL. Any solution to fix this? Thank you in advance.
Current Version on my J5 Prime: G570YDXU2BRC1 (XTC)

NoorSyafiq2014XDA said:
Hi, I want to downgrade back to Android 6.0.1 Marshmallow by flashing it through Odin. But when it starts flashing, the box says FAIL. Any solution to fix this? Thank you in advance.
Current Version on my J5 Prime: G570YDXU2BRC1 (XTC)
Click to expand...
Click to collapse
Before flashing the firmware you need to flash the marshmallow bootloader and modem for your device then you can successfully flash firmware.

garylawwd said:
Before flashing the firmware you need to flash the marshmallow bootloader and modem for your device then you can successfully flash firmware.
Click to expand...
Click to collapse
this is what i get

NoorSyafiq2014XDA said:
this is what i get
Click to expand...
Click to collapse
Try just ticking tp in Odin not all of them

garylawwd said:
Try just ticking tp in Odin not all of them
Click to expand...
Click to collapse
What do you mean my "ticking tp in odin not all of them"? Sorry im slightly confused a little.

NoorSyafiq2014XDA said:
What do you mean my "ticking tp in odin not all of them"? Sorry im slightly confused a little.
Click to expand...
Click to collapse
AP I mean sorry. Look at all the boxes you ticked to flash on the right hand side. Only AP should be selected

garylawwd said:
AP I mean sorry. Look at all the boxes you ticked to flash on the right hand side. Only AP should be selected
Click to expand...
Click to collapse
I tried, and it downgraded to Marshmallow. But it doesn't downgrade the bootloader.

How to Downgrade from Pie Beta to Oreo ?

Is there any ways i could downgrade my S8 from Pie Beta to Oreo - I Would Love to know that & My Model is G950F

find the latest oreo firmware for your model/country and flash it with odin

Just to confirm that data will be wiped if we flash with odin even using home csc file?

xlucian said:
find the latest oreo firmware for your model/country and flash it with odin
Click to expand...
Click to collapse
i already tried that and it didn't work , it keeps failing with odin

Last time I was on Beta (8.0) you could go back using Samsungs Kies.
It flashed latest available firmware on your phone.

yener90 said:
Last time I was on Beta (8.0) you could go back using Samsungs Kies.
It flashed latest available firmware on your phone.
Click to expand...
Click to collapse
The issue is Samsung Kies doesn't Support Galaxy S8 Anymore

PrinceGumPlay said:
i already tried that and it didn't work , it keeps failing with odin
Click to expand...
Click to collapse
worked fine for me.
make sure that you have the right firmware for your variant and each file in the right place in odin.
also, what is exactly that odin fails on?

PrinceGumPlay said:
The issue is Samsung Kies doesn't Support Galaxy S8 Anymore
Click to expand...
Click to collapse
What? I would believe you if you would say S5. But S8 is not so old.

Use Odin, I downgraded to CRL3 version without problems. In case of errors, enter into stock recovery and make factory reset.

Debren said:
Use Odin, I downgraded to CRL3 version without problems. In case of errors, enter into stock recovery and make factory reset.
Click to expand...
Click to collapse
i tried to downgrade to CRL3 and it was unsuccessful with odin , it fails for no reason

PrinceGumPlay said:
i tried to downgrade to CRL3 and it was unsuccessful with odin , it fails for no reason
Click to expand...
Click to collapse
Try the official method with smart switch from a Pc that Samsung recommends (Read screenshot below)

ELMoro752 said:
Try the official method with smart switch from a Pc that Samsung recommends (Read screenshot below)
Click to expand...
Click to collapse
the screenshots don't show up tho

PrinceGumPlay said:
the screenshots don't show up tho
Click to expand...
Click to collapse
Here's the text copied and paste ?
"10. How can I restore the official software during the Beta Programme?
You can re-install the official software by using the PC version of Smart Switch.
(You can download it from the following link - http://www.samsung.com/uk/getting-started/smart-switch/).
Please connect your phone to your computer, launch Smart Switch on your computer, and press the “Update” button to re-install the official software (rollback). "

Debren said:
Use Odin, I downgraded to CRL3 version without problems. In case of errors, enter into stock recovery and make factory reset.
Click to expand...
Click to collapse
In which beta of the Pie were you?

Gabriel Martins said:
In which beta of the Pie were you?
Click to expand...
Click to collapse
beta 2

Debren said:
beta 2
Click to expand...
Click to collapse
Did you install the December or January patch version using Odin? Another question, where can I see the bootloader version, could it show with an image?

Gabriel Martins said:
Did you install the December or January patch version using Odin? Another question, where can I see the bootloader version, could it show with an image?
Click to expand...
Click to collapse
I went back to CRL3 version, which has December security patches. A few moments later phone announced CRLB update by itself.
Settings - Phone Informations - Software Informations (translating from my PL version)

I just downgraded back to Oreo from DRL5 Pie build last night. I Odin back to CRK1. From here you can stay or update to latest Oreo build. After I flashed CRK1, I did have to go into recovery and wipe data/factory reset. It will just remove everything from your phone to factory defaults. Make sure you remember your google login details or you could get locked out of your phone. And back up your photos and stuff. I'm on sprint s8+.

Downgrade to oreo
PrinceGumPlay said:
i tried to downgrade to CRL3 and it was unsuccessful with odin , it fails for no reason
Click to expand...
Click to collapse
Hi, I wanted to ask you if you managed to restore Oreo?

Downgrade from DRL5 to CRL1
Palingenesis said:
I just downgraded back to Oreo from DRL5 Pie build last night. I Odin back to CRK1. From here you can stay or update to latest Oreo build. After I flashed CRK1, I did have to go into recovery and wipe data/factory reset. It will just remove everything from your phone to factory defaults. Make sure you remember your google login details or you could get locked out of your phone. And back up your photos and stuff. I'm on sprint s8+.
Click to expand...
Click to collapse
Hello ..... I upgraded CRL1 to DRL5 but now I can't go from DRL5 to DRL7, in order to do that I have to downgrade to CTL1 ..... I see you managed to downgrade to CRK1 using Odin, how you did that?? Can you provide a guide or a tutorial?? Thanks!!