Database Users

[Q] How to Install offical upgrade

Hi, i would like to know how can i install the official upgrwde, after download it from huawei website?
Step by step please... it's my 1st android...
Cheers

There should be a step by step guide at the Huawei web site. So double check there first.
If you have a "dload" file from Huawei, then all you should need to do is put it on your sdcard and reboot your device. When your S7 turns on you should see a progress bar. When the update is complete remove your battery..... do not push the power button, it will cause the device to redo the update. Remove your sdcard from the S7 and remove the "dload" file from it (via card reader or hub connected to your PC). Once the dload file is no longer on your sdcard you can put it back to use in the S7.
Upon rebooting, you should see the update has taken hold. To verify, look in " About Device" in your settings menu.

andrepepe said:
Hi, i would like to know how can i install the official upgrwde, after download it from huawei website?
Step by step please... it's my 1st android...
Cheers
Click to expand...
Click to collapse
Make sure you don't have a dload folder inside a dload folder if you have got a zipped file.
Dload in the root directory of sdcard and the update files in the dload folder!

[OFFICIAL] Honor 6 (L02, L12, L04) Stock ROMs

How to install Stock ROM:
Warning: You need to have stock recovery, /system/build.prop and /data/cust/prop/local.prop.
DON'T forget to set permissions to rw-r--r-- (644) after you restore build.prop and local.prop.
Download and unzip to get "dload" folder with "UPDATE.APP" inside.
Put "dload" folder with "UPDATE.APP" inside, to root of your SD.
(you will NOT lose your data) Open "Updater" > "Menu" > "Local update".
or
(You will lose your data)Turn off your phone and activated by holding all three buttons (Vol-, Vol+, Power).
How to install OTA:
Warning: You need to have stock recovery, /system/build.prop and /data/cust/prop/local.prop.
DON'T forget to set permissions to rw-r--r-- (644) after you restore build.prop and local.prop.
Download zip and rename it to "update.zip" (DO NOT extract it).
Put "update.zip" in "dload" folder on root of your SD.
Open "Updater" > "Menu" > "Local update".
Mega Folder (EMUI4.0) here.
Mega Folder (EMUI3.1) here.
Mega Folder (EMUI3.0) here.
Mediafire Folder (EMUI2.3) here.
Stock build.prop and local.prop uploaded here.
Thermalboyz' dropbox here.
Post#2 H60-L02 ROMs
Post#3 H60-L12 ROMs
Post#4 H60-L04 ROMs
XDA:DevDB Information
[OFFICIAL] Honor 6 (L02, L12, L04) Stock ROMs, ROM for the Huawei Honor 6, Honor 6x
Contributors
VirusPlus, thermalboyz
ROM OS Version: 4.4.x KitKat
Version Information
Status: Stable
Created 2014-12-05
Last Updated 2015-01-21

H60-L02
Official EMUI site.
EMUI3.1 Mega Folder
Latest Full ROM:
6.2.1 (Developer)
B535 (Stable)
EMUI3.0 Mega Folder
Latest Full ROM:
5.8.5 (Developer)
B316 (Stable)
EMUI2.3 Mediafire Folder
Latest Full ROM:
B121SP06 (Stable)

H60-L12
Official EMUI site.
EMUI3.1 Mega Folder
Latest Full ROM:
6.2.1 (Developer)
B535 (Stable)
EMUI3.0 Mega Folder
Latest Full ROM:
5.8.5 (Developer)
B316 (Stable)
EMUI2.3 Mediafire Folder
Latest Full ROM:
B121SP06 Mediafire (Stable)

H60-L04
Official Huawei and HiHonor site.
EMUI3.0 Mega Folder
Latest Full ROM:
B390 (Stable)
EMUI2.3 Mediafire Folder
Latest Full ROM:
B114

Any other roms for this mobile
VirusPlus said:
Reserved 3
Click to expand...
Click to collapse
I want to buy this mobile and any other roms are avialable to this mobile?? Plzz reply me

Would it be possible to include the default build.prop and local.prop files of each rom listed? Would be handy at times when you break something in one of these files...
For example, I've been unable to reenable camera mute option after I made some changes to local.prop.

micechal said:
Would it be possible to include the default build.prop and local.prop files of each rom listed? Would be handy at times when you break something in one of these files...
For example, I've been unable to reenable camera mute option after I made some changes to local.prop.
Click to expand...
Click to collapse
i add the link for local.prop and build.prop on 1st post.

What to do with update.app
Sorry if I will spam this great post with lame info.... It took me some time before I figured out how to apply the update.app from STOCK Rom
1. Via HONOR 6 Multi-Tool flash STOCK Recovery
2. Unzip STOCK rom into: SDcard\dload\update.app
3. Hold both VOL+ VOL- and POWER BUTTON
I hope this will help somebody

najki_cz said:
Sorry if I will spam this great post with lame info.... It took me some time before I figured out how to apply the update.app from STOCK Rom
1. Via HONOR 6 Multi-Tool flash STOCK Recovery
2. Unzip STOCK rom into: SDcard\dload\update.app
3. Hold both VOL+ VOL- and POWER BUTTON
I hope this will help somebody
Click to expand...
Click to collapse
Ok thanks i add instructions on 1st post for Full ROM and OTA installation.

Can you flash emui 3 on the h60-l04?

fasa123 said:
Can you flash emui 3 on the h60-l04?
Sent from my H60-L04 using XDA Free mobile app
Click to expand...
Click to collapse
There is a flashable rom here.
It is just a beta testing version though so be careful, it might contain a few bugs and chinese strings.

VirusPlus said:
Official Huawei site.
Mirrors:
EMUI3.0
OTA
B310 (Beta)
EMUI2.3
Full ROMs
B109SP01 (Stable)
Click to expand...
Click to collapse
Hi.
it's only necessary that i copy dload folder to my honor 6 l06-l04 and update?

My H60-L02 has build number : H60-L02V100R001CHNC008919SP05
I don't know the version of my device , it's chinese or unicom?
and Can I update to B307 (Stable)?

Yes you can install B307.

What is the difference between MF and MG??
And please guys upload some screen shots of the EMUI 3.0 on L04..
Can I update the same

@up
Look here:
https://www.youtube.com/watch?v=VZcPhVAbTAI

ashishakp said:
What is the difference between MF and MG??
Click to expand...
Click to collapse
MF stands for Mediafire mirror and MG for Mega mirror.
ROMs are same on both clouds. I change it now to be more clear.

ziociccio said:
Hi.
it's only necessary that i copy dload folder to my honor 6 l06-l04 and update?
Click to expand...
Click to collapse
no one?

Yes, ziociccio only copy the file, rename and press update.

Did any body tested EMUI 3.0 on L04 H60??

How to flash OTA update manually?

The Huawei Firmware Finder app indicates that there is an OTA update for the Tab (BTV-DL09C100B009). It is 424 MB. I could download it but I don't know how to install it. The zip contains several .dat files and two folders besides the 'UPDATE.APP' file.
Meanwhile the Tab's own HiCare app cannot find any update.
My version number is still BTV-DL09C100B006.
Some help would be appreciated.

Just follow the steps of Firmware finder
1. ckick rom
2. click download
3.click chek MD5
4. click move to DLOAD
5. tunoff device
6. Press ALTOGETHER : Vol UP + Vol DOWN + POWER
wait a few seconds and MUI screen apears to install Firmware

Thanks, but in this case (incremental OTA) it does not seem to be the right solution.
The Firmware Finder copies only the update.app to the dload folder. That file is just 75 MB from the 433-MB-big whole package. The rest of the files and folders inside the ZIP are omitted.
So, another method should be used but I don't know what.

ctibor said:
Thanks, but in this case (incremental OTA) it does not seem to be the right solution.
The Firmware Finder copies only the update.app to the dload folder. That file is just 75 MB from the 433-MB-big whole package. The rest of the files and folders inside the ZIP are omitted.
So, another method should be used but I don't know what.
Click to expand...
Click to collapse
You can try to unpacked update after point 3 and before point 4 that SJGSM wrote!
Let's me if it's ok now!

ctibor said:
Thanks, but in this case (incremental OTA) it does not seem to be the right solution.
The Firmware Finder copies only the update.app to the dload folder. That file is just 75 MB from the 433-MB-big whole package. The rest of the files and folders inside the ZIP are omitted.
So, another method should be used but I don't know what.
Click to expand...
Click to collapse
YES sorry I missed Step 4.
You have 5 steps in Firmware Finder:
1. CHANGELOG
2. DOWNLOAD
3. CHECK MD5
4. UNPACK UPDATE
5. MOVE TO DLOAD
Any way it is always better to Install FULL FIRMWARE Rather than Incremental UPDATE, It only takes a few minutes longer but you have a FULL FIRMWARE UPDATE with all your data saved.
You can also use Firmware Finder for Windows and donwload your firmware, then you just have to copy the UNPACKED File UPDATE.APP to the: ( dload ) folder in your External SD

ctibor said:
The Huawei Firmware Finder app indicates that there is an OTA update for the Tab (BTV-DL09C100B009). It is 424 MB. I could download it but I don't know how to install it. The zip contains several .dat files and two folders besides the 'UPDATE.APP' file.
Meanwhile the Tab's own HiCare app cannot find any update.
My version number is still BTV-DL09C100B006.
Some help would be appreciated.
Click to expand...
Click to collapse
If you have already UNZIPPED the download file, Just copy ALL the UNZIPPED files to an dload Folder in your Externalñ SD. If you dont have one Just create a New Folder in your ExtSD and RENAME it : dload
Then Power OFF and press: (Vol Up +Vol DOWN + POWER ) and the system will recognize the UPDATE.APP file in the MUI screen

SJGSM said:
If you have already UNZIPPED the download file, Just copy ALL the UNZIPPED files to an dload Folder in your Externalñ SD. If you dont have one Just create a New Folder in your ExtSD and RENAME it : dload
Then Power OFF and press: (Vol Up +Vol DOWN + POWER ) and the system will recognize the UPDATE.APP file in the MUI screen
Click to expand...
Click to collapse
I did exactly the same what you wrote. And I flashed the update with the method you suggested. Everything went smoothly - seemingly.
(I am not totally noob, this is the fifth Huawei device I've been handling. My current phone is Huawei P9 Plus and I've put on all the new ROM versions 'by hand' becauce OTA did not come.)
But something was wrong because
a) the update process went through too fast, just a couple of seconds from 0 to 100%.
b) the version number has not changed. I still have BTV-DL09C100B006,
c) the dload folder and the whole extracted package in it were not deleted after the process, remained on the SD card.
So I suspect that only the UPDATE.APP was installed, the rest of the package not. The M3 now keeps working normally but unfortunately there is one problem: the tab lost its 4G (LTE) capability after the update, now the phone radio works only in 3G and/or GSM mode.
You are right, a full ROM flashing is always better, more secure but there is NO full ROM available for this Tab! I've searched the whole net and found only OTAs for the M3. I'd like to get back the normal functionality because I bought the device exactly to have quick access to the internet everywhere.
So I don't know what to do. If you or somebody else could find a full ROM for the device I'd be very grateful!

Problem solved!
Problem solved!
Earlier I tried to update the M3 with HiSuite but there was no package available at that time. Now, after my unsuccessful manual update, I connected the Tab to my notebook again and ran HiSuite. And voilá: now it offered the B009 update.
The install went without problem and now I have BTV-DL09C100B009. The LTE data capability came back, and everything works well so far.
Anyway, thanks to those who tried to help!

I have downloaded a firmware file from firmware finder but I didn't see anywhere how to check MD5. The file unzipped OK but I don't want to install until I check MD5. Where is the MD5 information for each download firmware?
---------- Post added at 01:46 PM ---------- Previous post was at 01:44 PM ----------
I have downloaded a firmware file from firmware finder but I didn't see anywhere how to check MD5. The file unzipped OK but I don't want to install until I check MD5. Where is the MD5 information for each download firmware?
SJGSM said:
YES sorry I missed Step 4.
You have 5 steps in Firmware Finder:
1. CHANGELOG
2. DOWNLOAD
3. CHECK MD5
4. UNPACK UPDATE
5. MOVE TO DLOAD
Any way it is always better to Install FULL FIRMWARE Rather than Incremental UPDATE, It only takes a few minutes longer but you have a FULL FIRMWARE UPDATE with all your data saved.
You can also use Firmware Finder for Windows and donwload your firmware, then you just have to copy the UNPACKED File UPDATE.APP to the: ( dload ) folder in your External SD
Click to expand...
Click to collapse

Honor 5C NEM-L22 B301, B310, B350 Nougat Firmware

Hi, Everyone, If anyone wants to download the official firmware for Honor 5C NEM-L22 Variant , Here is the guide and download link :
B301 Indian Nougat FIrmware : Click Here
B310 Indian Nougat Firnware : Click Here
B351 Asia Nougat Firmware Click Here
Delete this if someone already provided the link. Also feel free to contact me.
Full Guide :
Note:
This Update is only for Honor 5C users.
This ROM is an experimental release, It may contain Bugs.
I'm not responsible for any damage to your phone while installing this Update.
Make sure that you have latest USB drivers installed
Take complete backup of your phone and then proceed.
Method 1
First of all, Download the Stock ROM from above link and move it to your SD Card/Internal memory
Now Extract the Downloaded ROM ZIP file on your SD Card
Look for the folder called "dload" in your SD Card root. if you don't have Create a folder called dload in the root directory and move the update.app file in dload folder.
In your phone, dial *#*#2846579#*#* from phone dialer to open the hidden menu.
Navigate the option Project Menu --> Software Upgrade --> SDCard.
Now select the update.app and Run update.
Wait untill the installation process completes.
Once the installation process is completed, you can reboot your Honor 5C
That's it ! You have Installed the latest version of B350 build on Honor 5C.
Method 2
Download the Stock ROM from above
Extract the Downloaded ZIP file
Create a folder called dload in the root directory and move the update.App file in dload folder.
Navigate to the phone Settings -–>Update and Click on the menu button.
Press “Volume Up + Volume Down and Power Button” simultaneously. The Update installation starts automatically.
Wait until update installation completes.
Done

NEM-L22
Hey how about for B150 ?

will this work in nem- l21c432b132

Not work to firmware finder NEM-L22C675B301 to NEM-L22C675B310

NEM-L22
Hi, can I flash Asian frimware on NEM-L22 B330 Indian frimware.
Does it cause any problems to my phone .
Pls tell me.

I want to rollback my phone to MM and i am new on this. Need your help!

Hello guys. I don't want to do this without asking people who knows how to do the rollback.
The build number of my phone is : L31-C464.
I think i suppose to find the files of my build to do the rollback but i couldn't find them anywhere. I would really appreciate if someone could help me. Don't want to to do something wrong and brick my phone.

Hello there,
This is a guide to rollback
1) download the rollback package from this link; http://consumer.huawei.com/np/support/products/downloads/detail/p9lite-np.htm?id=93645
2) create a folder on your external SD cared named DLOAD and put the extracted UPDATE.APP file in there. (The file is inside the zip you downloaded)
3) Turn off the phone completely
4) Hold volume up, volume down and power simultaneously until you see the update screen (it will not UPdate, it will rollback
5) boot up the device and you should be on marshmallow
6) INSTALL OTA UPDATE (see more info in the PDF file provided in the zip)