Soft bricked Nexus 6P, bootloop - Nexus 6P Q&A, Help & Troubleshooting

EDIT: A lot of Users have the same Issues, read about it here: https://productforums.google.com/forum/#!topic/nexus/iPnYjg322Q8
Edit2: this thread can be closed, thanks.
Hi,
i am stuck in a bootloop. I tried to find a thread with the same issue, but i wasn't succesful.
So here's what i've done and what's my problem.
Problem:
The Phone is stuck after the google logo, restarts .
i CAN get into TWRP/recovery/bootloader
what i did:
I flashed the factory images (even different versions) both via flashall.bat and manually typing.
after that i tried a new install and hard reseting, erasing cache afterwards.
I treid to adb sideload the Full OTA Roms, no luck either.
I tried installing Custom Roms(lineage, DU)/ EX Kernel on top of stock rom.
& the usual stuff like changing pcs, cables and usb ports.
The Flashing works fine everytime.
When i connect my N6P to my pc after flashing, it says 110GB free out of 110Gb.
EDIT: when i open file manager in twrp, i see a lot of folders (root, recovery, system, cache boot etc)
I thought maybe it is a permission problem or a filesystem problem?
Maybe i need to change filesystems in twrp?
please shre any ideas with me, i appreciate your help. My ohone is now bricked for nearly 24hours... I have no backup phone.

madddiiin said:
Hi,
i am stuck in a bootloop. I tried to find a thread with the same issue, but i wasn't succesful.
So here's what i've done and what's my problem.
Problem:
The Phone is stuck after the google logo, restarts .
i CAN get into TWRP/recovery/bootloader
what i did:
I flashed the factory images (even different versions) both via flashall.bat and manually typing.
after that i tried a new install and hard reseting, erasing cache afterwards.
I treid to adb sideload the Full OTA Roms, no luck either.
I tried installing Custom Roms(lineage, DU)/ EX Kernel on top of stock rom.
& the usual stuff like changing pcs, cables and usb ports.
The Flashing works fine everytime.
When i connect my N6P to my pc after flashing, it says 110GB free out of 110Gb.
I thought maybe it is a permission problem or a filesystem problem?
Maybe i need to change filesystems in twrp?
please shre any ideas with me, i appreciate your help. My ohone is now bricked for nearly 24hours... I have no backup phone.
Click to expand...
Click to collapse
So if i go into twrp/wipe/advanced
select system + repair r change filesystem it says:
Size: 2929 MB, Used: 2597 MB, ext4
select data, ".."
Size: 113661 MB, Used:0 MB, ext4
I can Repair System , but not data.
data: it says /sbin/e2fsck -fp /dev/block/mmcblk0p44 process ended with error: 1 unable to repair data.
EDIT:
I tried to format every partition;
chache, userdata and system format fine,
but boot cant be formatted; it report error: "Formatting is not supported for filesystem with type ' '."
is my boot partition broken?

Related

Factory Reset Taking Too Long in TWRP

Hello,
I have been trying to flash android 5.1.1 factory image onto my Nexus 7 (nakasi-grouper). It is unlocked and I have the factory image zip file pushed onto the /sdcard/ folder using adb. But when it tried to install it, it gives me an error message saying:
Error: Unable to mount /data /cache /system ( i am unable to mount System/Cache/Data from TWRP either)
I have tried multiple methods going through different threads form your website (which is awesome btw! ), but everything fails.
Flashing through fastboot and Nexus Tool kit (Wugs) from PC , gets interrupted at Failed to write boot-loader -- writing system...... and the device switches off automatically. And when i turn it on again, the process fails.
Finally I have tried to factory reset it, it took a whole night but it is still stuck at: Formatting Cache using make_ext4fs function. I am considerably new to android and I have no clue how to proceed from here. Any help is much appreciated!

Soft bricked my Lenovo ZUK Z1

Hello All,
I flashed Android Nougat on my ZUK Z1 by rooting it.
I was using it for quite some time comfortably but then due to some reasons i formatted my phone and unfortunately my OS got deleted probably due to which i got stuck in boot loop.
However TWRP was working, I can even log into fastboot.
I tried installing stock ROM using ADB sideload feature.
The install starts , shows percentage of completion and then gets completed but then when i reboot the system it opens the TWRP screen again.
I have tried the following steps :
1. wipe cache and dalvik , Installing stock rom , wipe cache and dalvik again
2. at times it gives me error of zip verification failed , And so as suggested in one of the threads I disabled zip verification through recovery.
3. at times after the flashing is completed, when i reboot it says NO OS INSTALLED, you still want to reboot?
4. at times while flashing through ADB sideload , it says "unmount of /system failed ; no such volume Script succeeded result was [ ]"
5. at times it says script succeeded: result was [ t ]
basically so many threads and so many options tried but the phone keeps booting into TWRP.
Any help will be greatly appreciated guys ... Please get back with your expertise !!
Ratneshpathak12 said:
Hello All,
I flashed Android Nougat on my ZUK Z1 by rooting it.
I was using it for quite some time comfortably but then due to some reasons i formatted my phone and unfortunately my OS got deleted probably due to which i got stuck in boot loop.
However TWRP was working, I can even log into fastboot.
I tried installing stock ROM using ADB sideload feature.
The install starts , shows percentage of completion and then gets completed but then when i reboot the system it opens the TWRP screen again.
I have tried the following steps :
1. wipe cache and dalvik , Installing stock rom , wipe cache and dalvik again
2. at times it gives me error of zip verification failed , And so as suggested in one of the threads I disabled zip verification through recovery.
3. at times after the flashing is completed, when i reboot it says NO OS INSTALLED, you still want to reboot?
4. at times while flashing through ADB sideload , it says "unmount of /system failed ; no such volume Script succeeded result was [ ]"
5. at times it says script succeeded: result was [ t ]
basically so many threads and so many options tried but the phone keeps booting into TWRP.
Any help will be greatly appreciated guys ... Please get back with your expertise !!
Click to expand...
Click to collapse
QFIL method is your way
QFIL
Thanks but Can you please tell me where to get information about it I haven't tried it ever.
Any links in XDA group would be greatly helpful.
QFIL
strongst said:
QFIL method is your way
Click to expand...
Click to collapse
Thanks , bt Can you please tell me where to get information about QFIL.
I haven't done it ever , any links from XDA group will be greatly helpful.
Or if u can let me know what exactly to search for, ill do that.
Ratneshpathak12 said:
Thanks , bt Can you please tell me where to get information about QFIL.
I haven't done it ever , any links from XDA group will be greatly helpful.
Or if u can let me know what exactly to search for, ill do that.
Click to expand...
Click to collapse
Using Google search you find tons of guides like this one.
Also in xda forums searching by qfil there's enough.

I can not pass files through twrp

My cell phone corrupted the HW partition. Then the SIM cards stopped picking up a signal. I found the solution, but I'm facing a problem that I can not solve.
My TWRP simply hangs when I do
adb push hw.img /dev/block/mmcblk0p43
Stop working, I've left it for more than an hour. And because of that I just can not get past the file.
And when I use dd=/if with the system turned on. It seems that the file does not pass, or is it necessary to change the permissions after passing this command?
make a clean restore by flashing latest firmware, wipe rom, return into bootloader, flash TWRP (32bit) , try to repair or repartition, no guarantee for this, just a try to help

Need help returning to stock, have constant issues, please HELP!!!

Hi,
I initially had G935FXXS3ERHD_G935FXEO3ERG2_XEO installed and flashed Glamour ROM S9+ port some time ago, now i need to return it to stock but no luck...
Using latest odin i flashed:
G935FXXU3ERL3_G935FXEO3ERKF_XEO
and
G935FXXU3ERJE_G935FXEO3ERJF_XEO
(i need to remain on 3 bootloader)
after each flash i receive the NO COMMAND screen, and cannot boot into stock recovery... only way to boot the phone is to install TWRP... I have noticed when i plug the phone is it comes up as GALAXY S9+ so i am guessing it hasn't been wiped correctly (i did formats, factory resets, wipes many many times and no change)
i have no idea what else to try
Hi,
Using latest Odin I am trying to return to my phone to stock but cannot 
I have tried 4 different firmware’s already (over 20 times) and each one will PASS the flash process, phone rests, installing system update (stops at around 30%) and during the blue screen the update stops, resets, receive Erasing message for a bit and then NO COMMAND and phone will simply not boot. (with some flashes the stock recovery is not even available, working or present)
... only way to boot the phone is to install TWRP... installing the NO VERITY file seems to help in booting…
I have noticed when i plug the phone is it comes up as another device name (from a previous ROM) so i am guessing it hasn't been wiped correctly (i did formats, factory resets, wipes many many times and no change)
Back in DOWLOAD MODE under system status = CUSTOM (after flashing stock firmware)
My guess is that the new firmware I flash simply wont stick, or is half installed, or could be something to do with encryptions,
Some of the logs I see include:
Failed to open recovery
Reboot recovery cause UNKNOWN
E: Failed setting up dirty target
Fail to mount /system as rw
i have no idea what else to try

Yureka Plus Unable to Mount storage, system, cache. Internal memory 0. System 0

My Yureka plus was working fine for 1 year with Crdroid 3.6 nougat rom 7.1.2
Two months back One fine morning when I woke up my Yureka plus display says
Encryption unsuccessful.
Please Reset the mobile.
I clicked the reset.
That is all. Nothing.
My twrp 3.2.1 unable to wipe, anything as earlier.
Error message in every attempt.
Factory reset- error
wipe cache, system, dalvik cache internal storage- error
tried all the methods found in various forums like
Repair file system
Resize the system,
Change the file system
Error,
Internal storage 0
Cache 0
System 0
Unable to mount storage, system, cache.
Cant flash any rom- shows error message only.
Annabathina Unbrick tool- no success.
flashng CM 12.1 using fast boot mode- failure
Since boot write error
System write error
Cache write error
Recovery write error
So can’t Install.
Treid YGDP tool.
No success. After few seconds error message.
Whenever time permits I tried all the methods.
till date no success.
when plugged in the usb charger it directly opens the fast boot mode only that’s all.
When I switch on just a blink of Yureka logo and fast boot mode then blank.
Again if I put into charging mode only fast boot mode open till I connect the charging cable,
Once I remove it nothing, Again blank screen.
As a last attempt I had given to the Micromax service center.
After 4 days they said motherboard has to be changed with the cost of Rs.3750/!
Such a easy reply from them
I got back the mobile and tried again.
Till date no success..
I searched everywhere.
Several persons facing the same issue.
But no solution.
Any one have solutions
cpswamy said:
My Yureka plus was working fine for 1 year with Crdroid 3.6 nougat rom 7.1.2
Two months back One fine morning when I woke up my Yureka plus display says
Encryption unsuccessful.
Please Reset the mobile.
I clicked the reset.
That is all. Nothing.
My twrp 3.2.1 unable to wipe, anything as earlier.
Error message in every attempt.
Factory reset- error
wipe cache, system, dalvik cache internal storage- error
tried all the methods found in various forums like
Repair file system
Resize the system,
Change the file system
Error,
Internal storage 0
Cache 0
System 0
Unable to mount storage, system, cache.
Cant flash any rom- shows error message only.
Annabathina Unbrick tool- no success.
flashng CM 12.1 using fast boot mode- failure
Since boot write error
System write error
Cache write error
Recovery write error
So can’t Install.
Treid YGDP tool.
No success. After few seconds error message.
Whenever time permits I tried all the methods.
till date no success.
when plugged in the usb charger it directly opens the fast boot mode only that’s all.
When I switch on just a blink of Yureka logo and fast boot mode then blank.
Again if I put into charging mode only fast boot mode open till I connect the charging cable,
Once I remove it nothing, Again blank screen.
As a last attempt I had given to the Micromax service center.
After 4 days they said motherboard has to be changed with the cost of Rs.3750/!
Such a easy reply from them
I got back the mobile and tried again.
Till date no success..
I searched everywhere.
Several persons facing the same issue.
But no solution.
Any one have solutions
Click to expand...
Click to collapse
Method 1
1 Download
https://androidfilehost.com/?fid=745849072291689565
2 extract the zip
3 rename flash.txt into flash.bat
4 run the flash.bat file
5 after commands runs, flash twrp 3.3 IMG
Done
Method 2
For method 2 contact me in telegram
Rajendran Rasa said:
Method 1
1 Download
https://androidfilehost.com/?fid=745849072291689565
2 extract the zip
3 rename flash.txt into flash.bat
4 run the flash.bat file
5 after commands runs, flash twrp 3.3 IMG
Done
Method 2
For method 2 contact me in telegram
Click to expand...
Click to collapse
Before posting the thread I tried that method Yureka backup files image flashing. Failed

Categories

Resources