Hello...I have a problem with my Samsung Galaxy s3 neo gt-i19301i
I flashed ciro rom with the sky kernel and it say that "Kernel is not seandroid enfouncing" but the phone works fine...I tried to go back to the stock rom and my phone has a Europe stock rom but I didn't find the original stock rom...anyway i flashed a stock rom from the Arabia or so xD is there any problem that can occure?
And also...anytime when i try to flash a recobery via odin (CWM/TWRP) IT SAYS THAT RECOVERY IS NOT SEANDROID ENFOUNCING...EVERY FU**ING TIME....CAN YOU HELP ME ???
motionsnk said:
Hello...I have a problem with my Samsung Galaxy s3 neo gt-i19301i
I flashed ciro rom with the sky kernel and it say that "Kernel is not seandroid enfouncing" but the phone works fine...I tried to go back to the stock rom and my phone has a Europe stock rom but I didn't find the original stock rom...anyway i flashed a stock rom from the Arabia or so xD is there any problem that can occure?
And also...anytime when i try to flash a recobery via odin (CWM/TWRP) IT SAYS THAT RECOVERY IS NOT SEANDROID ENFOUNCING...EVERY FU**ING TIME....CAN YOU HELP ME ???
Click to expand...
Click to collapse
Is ok, little annoyng but you have to "live with it"
Well there is no way I could change this?
motionsnk said:
Well there is no way I could change this?
Click to expand...
Click to collapse
PL 1.2 with stock kernel
Greg9 said:
PL 1.2 with stock kernel
Click to expand...
Click to collapse
I do not understand..help me please...i flashed recovery and again the error..i flashed cm 12.1 and again the error..but phone works..still i do not like it can you help me step by step?
motionsnk said:
I do not understand..help me please...i flashed recovery and again the error..i flashed cm 12.1 and again the error..but phone works..still i do not like it can you help me step by step?
Click to expand...
Click to collapse
If you don't want to see the red warning install the latest Project Lucky ROM and don't change kernel
Greg9 said:
If you don't want to see the red warning install the latest Project Lucky ROM and don't change kernel
Click to expand...
Click to collapse
The other ones like cm 12 or so can t be fixed?
Nope, but don't pay attention... Is harmless
Greg9 said:
Nope, but don't pay attention... Is harmless
Click to expand...
Click to collapse
i see but when i try to wipe data and factory restet from twrp...wich is not seandroid enfouncing too -_- my phone got a bootloop...i was using cm 12.1...
motionsnk said:
i see but when i try to wipe data and factory restet from twrp...wich is not seandroid enfouncing too -_- my phone got a bootloop...i was using cm 12.1...
Click to expand...
Click to collapse
Explain better, if you want to reset go in settings, backup e reset
Well i managed to deal with this error now that i understood it s harmless so it t ok now
Related
Hey everyone.
I tried updating my CWM via odin, I did everything as normal.
However when the phone boots back up, It says ( in the top left hand corner )
RECOVERY BOOTING
set warranty bit : recovery
When I put it back into download mode and back into odin, it came up with the green 'pass'
I have tried taking out the battery, and then entering into bootloader, but the phone just resets and comes back up with the same message. There is no way for me to get into bootloader
I need help please guys
kentykentkent said:
Hey everyone.
I tried updating my CWM via odin, I did everything as normal.
However when the phone boots back up, It says ( in the top left hand corner )
RECOVERY BOOTING
set warranty bit : recovery
When I put it back into download mode and back into odin, it came up with the green 'pass'
I need help please guys
Click to expand...
Click to collapse
It's normal. The Knox bootloader only like its modules stock.
Whit a Customer Recovery we have : set warranty bit: recovery
Whit a new modem we have : set warranty bit: modem
Whit a new kernel we have : set warranty bit : kernel but in this case we can have at boot "Secure Fail: Kernel" in red and not reboot. May be.
This arrived to me on another device w/ Knox bootloader also.
SO what do I do mate?
ValenteL said:
It's normal. The Knox bootloader only like its modules stock.
Whit a Customer Recovery we have : set warranty bit: recovery
Whit a new modem we have : set warranty bit: modem
Whit a new kernel we have : set warranty bit : kernel but in this case we can have at boot "Secure Fail: Kernel" in red and not reboot. May be.
This arrived to me on another device w/ Knox bootloader also.
Click to expand...
Click to collapse
Hey mate.
Ok, so what do I do now?
Just wait for it to boot?
kentykentkent said:
Hey mate.
Ok, so what do I do now?
Just wait for it to boot?
Click to expand...
Click to collapse
having the same issue and using a fooking mac aint helping...:silly:
check out my thread pc user using mac, maybe either one of us will get a response/fix and can help each other
apanayis said:
having the same issue and using a fooking mac aint helping...:silly:
check out my thread pc user using mac, maybe either one of us will get a response/fix and can help each other
Click to expand...
Click to collapse
Ah I hate when people aren't online and can't help.
I can get into download mode, but I can't even get into bootloader...
Did evrything the same as I have done 10x before, I am guessing it could be a dodgy file we flashed?
Have you tried flashing an older version of CWM ?
I am going to try now..
kentykentkent said:
Ah I hate when people aren't online and can't help.
I can get into download mode, but I can't even get into bootloader...
Did evrything the same as I have done 10x before, I am guessing it could be a dodgy file we flashed?
Have you tried flashing an older version of CWM ?
I am going to try now..
Click to expand...
Click to collapse
my problem is im using a Mac, JOdin 3 casual is slightly different and im not having any luck...its going toend in two ways...source a pc tomorrow and try and fix it or ill end up with a lovely door stop lol
Did you get to read my thread? Same issue?
apanayis said:
my problem is im using a Mac, JOdin 3 casual is slightly different and im not having any luck...its going toend in two ways...source a pc tomorrow and try and fix it or ill end up with a lovely door stop lol
Did you get to read my thread? Same issue?
Click to expand...
Click to collapse
I am using a PC and have the same issue.
No idea what is going on, very frustrating !!!!
Sent from my GT-I9300 using xda app-developers app
kentykentkent said:
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
yep i get the same thing, any chance you can take a pic of the screen in download mode too?
also if you have charging does your battery indicator just show empty with no animation?
apanayis said:
yep i get the same thing, any chance you can take a pic of the screen in download mode to?
Click to expand...
Click to collapse
Sure.
Sent from my GT-I9300 using xda app-developers app
kentykentkent said:
Sure.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
OK, mine is exactly the same apart from the RP SWREV, mines showing S2, T2, R2, A2, P2
WTF this is i have no idea...
apanayis said:
OK, mine is exactly the same apart from the RP SWREV, mines showing S2, T2, R2, A2, P2
WTF this is i have no idea...
Click to expand...
Click to collapse
No idea what that means, we will wait for smarter ppl to help us lol.
kentykentkent said:
No idea what that means, we will wait for smarter ppl to help us lol.
Click to expand...
Click to collapse
LMAo i agree, besides its 4:25am here in Dubai, if i hear anything ill hit you up
apanayis said:
LMAo i agree, besides its 4:25am here in Dubai, if i hear anything ill hit you up
Click to expand...
Click to collapse
As will I.
Were you just trying to upgrade your CWM so you could run 4.4 kk ROM's
Or were you going from Stock to root?
kentykentkent said:
As will I.
Were you just trying to upgrade your CWM so you could run 4.4 kk ROM's
Or were you going from Stock to root?
Click to expand...
Click to collapse
Trying to upgrade CWM...
You need to flash KK with ODIN then let it boot.
You need to either root it using CF-Autoroot or CWM will. Both of these need to support KK.
Latest CF-Autoroot can be found here - http://download.chainfire.eu/352/CF-Root/CF-Auto-Root/CF-Auto-Root-hlte-hltexx-smn9005.zip
And the latest CWM here - http://forum.xda-developers.com/showthread.php?t=2454079
I don't know how it will play with a Mac though...
ultramag69 said:
You need to flash KK with ODIN then let it boot.
You need to either root it using CF-Autoroot or CWM will. Both of these need to support KK.
Latest CF-Autoroot can be found here - http://download.chainfire.eu/352/CF-Root/CF-Auto-Root/CF-Auto-Root-hlte-hltexx-smn9005.zip
And the latest CWM here - http://forum.xda-developers.com/showthread.php?t=2454079
I don't know how it will play with a Mac though...
Click to expand...
Click to collapse
Hey mate
Thanks for your reply.
I was already rooted and running JB 4.3
When you say I need to flash KK with ODIN, is that KK ROM or a KK supported CWM ?
Seriously confused here...
And I already tried downloading the latest CWM which is what got me into this mess in the first place
kentykentkent said:
Hey mate
Thanks for your reply.
I was already rooted and running JB 4.3
When you say I need to flash KK with ODIN, is that KK ROM or a KK supported CWM ?
Seriously confused here...
And I already tried downloading the latest CWM which is what got me into this mess in the first place
Click to expand...
Click to collapse
Grab the correct CWM for JB 4.3 and flash it, it'll fix you presuming you are running JB -- If not re-flash KK and run the latest CWM - then If if bootloops, take battery out place back in and boot into recovery, wipe cache and boot up into Android
radicalisto said:
Grab the correct CWM for JB 4.3 and flash it, it'll fix you presuming you are running JB -- If not re-flash KK and run the latest CWM - then If if bootloops, take battery out place back in and boot into recovery, wipe cache and boot up into Android
Click to expand...
Click to collapse
apanayis said:
Trying to upgrade CWM...
Click to expand...
Click to collapse
ultramag69 said:
You need to flash KK with ODIN then let it boot.
You need to either root it using CF-Autoroot or CWM will. Both of these need to support KK.
Latest CF-Autoroot can be found here - http://download.chainfire.eu/352/CF-Root/CF-Auto-Root/CF-Auto-Root-hlte-hltexx-smn9005.zip
And the latest CWM here - http://forum.xda-developers.com/showthread.php?t=2454079
I don't know how it will play with a Mac though...
Click to expand...
Click to collapse
Thanks again for everybody's help. What I did was just flashed the old CWM I was using prior to this new one.
Flashed it via ODIN as usual and it booted perfectly.
Still doesn't help me to upgrade my ROM to 4.4 kk LOL...
Just glad my phone is working again, thanks.
Hey guys,
I know this is kind of answered in alot of different places but nothing is guiding me to the correct files, just want to be safe and figured this was the best place to make sure i hit the bullseye.
Just updated to poland 4.4.2 kitkat and was looking to install a customer recovery so i could grab the latest version of xnote and a few other goodies. Could someone please guide me to a download section/link for cwm? or maybe twrp? which ever would work easiest
lofi01 said:
Hey guys,
I know this is kind of answered in alot of different places but nothing is guiding me to the correct files, just want to be safe and figured this was the best place to make sure i hit the bullseye.
Just updated to poland 4.4.2 kitkat and was looking to install a customer recovery so i could grab the latest version of xnote and a few other goodies. Could someone please guide me to a download section/link for cwm? or maybe twrp? which ever would work easiest
Click to expand...
Click to collapse
Here is a link for 4.4.2 flash it via Odin
https://www.dropbox.com/s/t6s4rfvz4sybxlk/n900-cwm-recovery-6.0.4.7-kk%280125%29.tar
bekasulaberidze said:
Here is a link for 4.4.2 flash it via Odin
https://www.dropbox.com/s/t6s4rfvz4sybxlk/n900-cwm-recovery-6.0.4.7-kk%280125%29.tar
Click to expand...
Click to collapse
i'm having alot of issues installing this ! loaded using odin PDA.. everything looks fine, phone then restarts and boots normally...odin says pass ! i try to jump into recovery and it's goes to download mode? Could the issue be because i have just updated from 4.3? i also had twrp installed on my phone
lofi01 said:
i'm having alot of issues installing this ! loaded using odin PDA.. everything looks fine, phone then restarts and boots normally...odin says pass ! i try to jump into recovery and it's goes to download mode? Could the issue be because i have just updated from 4.3? i also had twrp installed on my phone
Click to expand...
Click to collapse
you are using volume up button yes ?
bekasulaberidze said:
you are using volume up button yes ?
Click to expand...
Click to collapse
yep reads normal booting into recovery then just dumps into download mode "could not boot normally" reads at the top of of the screen
lofi01 said:
yep reads normal booting into recovery then just dumps into download mode "could not boot normally" reads at the top of of the screen
Click to expand...
Click to collapse
You have to factory reset..
bekasulaberidze said:
You have to factory reset..
Click to expand...
Click to collapse
think i will have to reinstall the firmware to do that because factory recovery is gone as well.. unless i can factory reset anther way? that being said what is a good alternative firmware maybe the poland 4.4.2 is the issue?
lofi01 said:
think i will have to reinstall the firmware to do that because factory recovery is gone as well.. unless i can factory reset anther way? that being said what is a good alternative firmware maybe the poland 4.4.2 is the issue?
Click to expand...
Click to collapse
Yes reset it with Odin, you have n900 ? try Russian firmware, after successfully reset make a factory reset from recovery, than root and flash custom recovery
would twrp 2.6.3.7 work on 4.4?
bekasulaberidze said:
Yes reset it with Odin, you have n900 ? try Russian firmware, after successfully reset make a factory reset from recovery, than root and flash custom recovery
Click to expand...
Click to collapse
nope n9005
lofi01 said:
nope n9005
Click to expand...
Click to collapse
Try BTU
bekasulaberidze said:
Try BTU
Click to expand...
Click to collapse
http://d-h.st/zVa#comments
hmm after you mentioned if i had n9005 i tried the alternative version and success link above !! i'll test it out now and update ... Thanks for the brain storming mate it helped get to the issue
btw what is that option in cwm that keeps askig me ROM may flash stock recovery on boot? >No >Yes disable recovery flash.. i just say no because i don't know wat it is lol
lofi01 said:
http://d-h.st/zVa#comments
hmm after you mentioned if i had n9005 i tried the alternative version and success link above !! i'll test it out now and update ... Thanks for the brain storming mate it helped get to the issue
btw what is that option in cwm that keeps askig me ROM may flash stock recovery on boot? >No >Yes disable recovery flash.. i just say no because i don't know wat it is lol
Click to expand...
Click to collapse
Hit no because ROM is trying to install it's own-stock recovery :good:
bekasulaberidze said:
Hit no because ROM is trying to install it's own-stock recovery :good:
Click to expand...
Click to collapse
Perfect have xnote 13 up and running !! everything is working great now.. no need for reset at all i'm happy, thanks for the help
lofi01 said:
Perfect have xnote 13 up and running !! everything is working great now.. no need for reset at all i'm happy, thanks for the help
Click to expand...
Click to collapse
you're welcome !
hi.p.s sorry for my bad english.i have problem with the s4.I can't get into recovery mode, its says in blue color on the top recovery booting and stuck. i can go into download mode...when i start phone normal mode its stuck on the samsung galaxy s4 i9505 logo...how to fix?
shariovas said:
hi.p.s sorry for my bad english.i have problem with the s4.I can't get into recovery mode, its says in blue color on the top recovery booting and stuck. i can go into download mode...when i start phone normal mode its stuck on the samsung galaxy s4 i9505 logo...how to fix?
Click to expand...
Click to collapse
Hi mate,
Please give us some more info
What rom do you have , costum , stock..are you rooted?
When this started, did you flash anything?
What have you tried so far?
MAX 404 said:
Hi mate,
Please give us some more info
What rom do you have , costum , stock..are you rooted?
When this started, did you flash anything?
What have you tried so far?
Click to expand...
Click to collapse
stock rom.with odin.
I bought a couple of days ago.. and its says "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again." so i flash stock rom with odin....and thats it..
i tried flash another stock rom from here http://forum.xda-developers.com/showthread.php?t=2265477
it's can be motherboard will dead?
shariovas said:
stock rom.with odin.
I bought a couple of days ago.. and its says "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again." so i flash stock rom with odin....and thats it..
i tried flash another stock rom from here http://forum.xda-developers.com/showthread.php?t=2265477
it's can be motherboard will dead?
Click to expand...
Click to collapse
Hi
My first suggestion would be take it back to where you got it , is on warranty right?
When you flashed stock rom as suggested on the thread you posted , did it all go ok? what rom version rom you had on the phone , what rom version you tried to flash?...you know you cannot downgrade, you should use same or newer rom to re flash your phone ( odin)
MAX 404 said:
Hi
My first suggestion would be take it back to where you got it , is on warranty right?
When you flashed stock rom as suggested on the thread you posted , did it all go ok? what rom version rom you had on the phone , what rom version you tried to flash?...you know you cannot downgrade, you should use same or newer rom to re flash your phone ( odin)
Click to expand...
Click to collapse
there is no warranty
Yes.its says pass.I tried 4.4.2 version,well but now i dont now how to fix the problem with the stuck on the "recovery booting" or samsung galaxy i9505 stuck logo
shariovas said:
there is no warranty
Yes.its says pass.I tried 4.4.2 version,well but now i dont now how to fix the problem with the stuck on the "recovery booting" or samsung galaxy i9505 stuck logo
Click to expand...
Click to collapse
What rom version you flashed , like I9505XXUGNH2 ? if possible show us the logs from odin
MAX 404 said:
What rom version you flashed , like I9505XXUGNH2 ? if possible show us the logs from odin
Click to expand...
Click to collapse
I have a lot
TGY-I9505ZHUFNB3-20140317110000
ZTO-I9505VJUFNB2-20140305104104
I9505XXUGNJ8_I9505OXXGNK1_SEB
I9505XXUGNJ8_I9505NEEGNJ2_NEE
I9505XXUFNC5_I9505H3GFNC2_H3G
I9505XXUFNB8_I9505OXAFNB8_DBT
I9505XXUENA4_I9505YXXENA3_PHN
I9505XXUEMKF_I9505PHNEMK5_PHN
p.s when i plug in charger its vibrates every 7 seconds and black screen..
shariovas said:
I have a lot
TGY-I9505ZHUFNB3-20140317110000
ZTO-I9505VJUFNB2-20140305104104
I9505XXUGNJ8_I9505OXXGNK1_SEB
I9505XXUGNJ8_I9505NEEGNJ2_NEE
I9505XXUFNC5_I9505H3GFNC2_H3G
I9505XXUFNB8_I9505OXAFNB8_DBT
I9505XXUENA4_I9505YXXENA3_PHN
I9505XXUEMKF_I9505PHNEMK5_PHN
p.s when i plug in charger its vibrates every 7 seconds and black screen..
Click to expand...
Click to collapse
And in all of then when flashed odin said pass and no errors in log?
If the phone was like that when you bought it.....is most like it something is dead inside...maybe EMMC memory, just guessing
MAX 404 said:
And in all of then when flashed odin said pass and no errors in log?
If the phone was like that when you bought it.....is most like it something is dead inside...maybe EMMC memory, just guessing
Click to expand...
Click to collapse
I do not remember or all, but many yes.
Well tomorrow I will go to a repair shop and i will look what they says.
shariovas said:
I do not remember or all, but many yes.
Well tomorrow I will go to a repair shop and i will look what they says.
Click to expand...
Click to collapse
Good luck mate , let us know what happen.....
Hello,
Can somebody help me with my SM-910K, i tried to root it using cf-auto-root but it didnt work. After that the phone reboot but it is only showing Note 4 logo and Olleg G. I tried to clear cache and wipe partition but still no luck. Can anyone please help? Thanks in advance
fannyman said:
Hello,
Can somebody help me with my SM-910K, i tried to root it using cf-auto-root but it didnt work. After that the phone reboot but it is only showing Note 4 logo and Olleg G. I tried to clear cache and wipe partition but still no luck. Can anyone please help? Thanks in advance
Click to expand...
Click to collapse
5.1.1 Lollipop Stock ROM can't be ROOTed without a permissive custom kernel
Hello buddy, as mentioned above, it cannot be rooted without a custom, permissive kernel. This thread also needs to be moved to Q&A
d4rkkn16ht said:
5.1.1 Lollipop Stock ROM can't be ROOTed without a permissive custom kernel
Click to expand...
Click to collapse
Sir, how can i fix my bootloop N910k? please help me
speedyjay said:
Hello buddy, as mentioned above, it cannot be rooted without a custom, permissive kernel. This thread also needs to be moved to Q&A
Click to expand...
Click to collapse
Sorry sir, i will move my concern to Q&A. please continue helping me.
fannyman said:
Sir, how can i fix my bootloop N910k? please help me
Click to expand...
Click to collapse
To fix the boot loop just re-Flash stock ROM (but no root yet)
Then find & flash custom PERMISSIVE Kernel for your Note 4 type if you are still want to be rooted.
d4rkkn16ht said:
To fix the boot loop just re-Flash stock ROM (but no root yet)
Then find & flash custom PERMISSIVE Kernel for your Note 4 type if you are still want to be rooted.
Click to expand...
Click to collapse
I have flashed stock ROM many times. but there's an error about NAND write "FAIL". how can i fix this?
fannyman said:
I have flashed stock ROM many times. but there's an error about NAND write "FAIL". how can i fix this?
Click to expand...
Click to collapse
you are facing a locked bootloader as we all are (both exy and snap) the only solution to fix your bootloop is to install apps like phone info then find out what your phone PDA version is then find the exact PDA from Sammobile or if you you are Having an 910C flash latest COJ5 rom or if you are on 910H try installing COJ4 rom (just download and install the latest frimware from sammobile or ... and you will be just fine )
Hi,
I already have a same problem with you, but i can through this..
you just find the right Firmware, its mean the latest firmware, try to download from sammoblie.com and find firmware for N910K picked the latest one. or folow this link : http://www.sammobile.com/firmwares/download/58333/N910KKTU2COJ5_N910KKTC2COJ5_KTC/
after download you just flash via Odin.
goodluck
fannyman said:
I have flashed stock ROM many times. but there's an error about NAND write "FAIL". how can i fix this?
Click to expand...
Click to collapse
Please provide me some information regarding your problem:
How did you flash stock ROM?
What is the type of stock ROM that you flash?
Can you enter Download Mode / Odin Mode?
Hello,
I need some help. I am using a Samsung Galaxy Tab 4 10.1 LTE SM-T535 and I want to flash a custom rom, but it is not working. If I want to flash http://forum.xda-developers.com/tab-4/development/rom-slimrom-5-0-1-alpha-0-7-t2963906 or http://forum.xda-developers.com/tab-4/development/rom-pac-rom-lp-mr1-beta-3-sm-t530-531-t3216682 everything looks great and the tablet restarts. Then the following error appears:
KERNEL IS NOT SEANDROID ENFORCING
Set Warranty Bit : kernel
Does this mean there is no kernel or what? I flashed the openrecovery-twrp-2.8.7.0-SM-T5XX-150810_matisse_wifi_3g_lte and wiped everything before flashing the ROM.
Please help me
Cololand said:
Hello,
I need some help. I am using a Samsung Galaxy Tab 4 10.1 LTE SM-T535 and I want to flash a custom rom, but it is not working. If I want to flash http://forum.xda-developers.com/tab-4/development/rom-slimrom-5-0-1-alpha-0-7-t2963906 or http://forum.xda-developers.com/tab-4/development/rom-pac-rom-lp-mr1-beta-3-sm-t530-531-t3216682 everything looks great and the tablet restarts. Then the following error appears:
KERNEL IS NOT SEANDROID ENFORCING
Set Warranty Bit : kernel
Does this mean there is no kernel or what? I flashed the openrecovery-twrp-2.8.7.0-SM-T5XX-150810_matisse_wifi_3g_lte and wiped everything before flashing the ROM.
Please help me
Click to expand...
Click to collapse
You have completed all the prerequisites before flashing (i mean 5.0 stock) ? And TWRP better to use https://www.androidfilehost.com/?w=files&flid=40746 .
Forgot text is correct , dont worry .
repey6 said:
You have completed all the prerequisites before flashing (i mean 5.0 stock) ? And TWRP better to use https://www.androidfilehost.com/?w=files&flid=40746 .
Forgot text is correct , dont worry .
Click to expand...
Click to collapse
Thanks, for the fast reply.
sub77 said:
Download official Samsung Lollipop Rom and flash with odin if you are coming from KitKat
Click to expand...
Click to collapse
Do u mean this step? Where do I get this ROM? I searched everywhere and I don't find it.
Cololand said:
Thanks, for the fast reply.
Do u mean this step? Where do I get this ROM? I searched everywhere and I don't find it.
Click to expand...
Click to collapse
If you have still 4.4.2 firmware you can select in this thread http://forum.xda-developers.com/tab-4/general/links-galaxy-tab-4-official-lollipop-5-t3102844 suitable for you firmware ( i mean region) and flash via Odin .
repey6 said:
If you have still 4.4.2 firmware you can select in this thread http://forum.xda-developers.com/tab-4/general/links-galaxy-tab-4-official-lollipop-5-t3102844 suitable for you firmware ( i mean region) and flash via Odin .
Click to expand...
Click to collapse
Thanks, you saved my day. I installed the CM ROM. But one more Problem: When I reboot this message still appears:
KERNEL IS NOT SEANDROID ENFORCING
Set Warranty Bit : kernel
and Apps are getting optimized. After that, everything is working fine. Is this normal?
By the way: The statusbar is very small and a few texts are not in german, but I think this is a ROM bug.
Cololand said:
Thanks, you saved my day. I installed the CM ROM. But one more Problem: When I reboot this message still appears:
KERNEL IS NOT SEANDROID ENFORCING
Set Warranty Bit : kernel
and Apps are getting optimized. After that, everything is working fine. Is this normal?
Click to expand...
Click to collapse
Yes it is . But CM13 much of raw else as for me . BlissPop and PacRom are more better .