I'm currently downloading the official BTU nougat update for my S7 Edge, as I am currently on an O2 CSC, when flashing the BTU version shall I use the BTU CSC or keep it as Home_CSC?
I'm not worried about the phone being reset as I am currently backing it up in Smart Switch as I type this.
Also if anyone could link me to the best guide to follow in order to go ahead with this please post it here, thanks. :good:
I'm after the same info if anyone can help ?
Related
Hi,
I bought my S7 edge form Portugal, the phone is factory unlocked.
Now I'm back in my country and I thought I should download from sammobile the official firmware of my carrier provider or the global version.
I'm not sure if I'll still receive OTA updates if I flash the firmware with ODIN, and if that's the case, please tell me if there's any other methods to flash the baseband without causing updates issues in the future.
I want to update the fw because Volte doesn't work.
Another question, I don't have a PC, so I was wandering if I can install Odin on Mac or in VmWare?
http://glassechidna.com.au/heimdall/
The firmware are available for two regions: UK (BTU) and the Czech Republic (O2C). You can download these Nougat-based firmware files and flash your compatible Galaxy S7 models manually (you should also be able to update your device through Samsung Smart Switch on your PC). Galaxy S7 edge firmware shouldn’t be far behind, and we will be sure to let you know once those show up in our database.
For S7 Edge : https://www.sammobile.com/firmwares/download/120208/G935FXXU1DPLT_G935FOXA1DPLT_BTU/
For S7 : https://www.sammobile.com/firmwares/download/120140/G930FXXU1DPLT_G930FOXA1DPLT_BTU/
Source: sammobile.com
will it work on dual sim s7 edge (sm-g935f)
sagor1 said:
will it work on dual sim s7 edge (sm-g935f)
Click to expand...
Click to collapse
Yes
Right .. I've been reading and researching this .. but can't find a definitive answer. Perhaps one of you gurus can assist. According to Phone INFO I have the following setup:
Bootloader/PDA/Baeband Version: G935FXXU1DPLT
CSC Version: G935FOXA1DPLT
When I try to use/install the Galaxy Gear VR, I keep getting "network error". From my research, this is linked to the CSC. Question is, how do I restore it to base CSC - without rooting?
Any help would be appreciated.
Cheers.
nice. can somebody upload the firmware somewhere else cuz i have to w8 9 hours to dld from sammobile
antenehnile said:
Yes
Click to expand...
Click to collapse
Thanx...
so i read on the other thread 1st i have to download mm btu rom...than i can flash this is it true?
or i just download this and flash it via odin?
sagor1 said:
Thanx...
so i read on the other thread 1st i have to download mm btu rom...than i can flash this is it true?
or i just download this and flash it via odin?
Click to expand...
Click to collapse
The other thread was created when the full firmware was not available yet, the workaround was to flash mm btu then update to nougat. These are the nougat firmwares as they are now available, not the mm ones. so you just have to flash them and you'll have nougat on your phone.
naryraza said:
The other thread was created when the full firmware was not available yet, the workaround was to flash mm btu then update to nougat. These are the nougat firmwares as they are now available, not the mm ones. so you just have to flash them and you'll have nougat on your phone.
Click to expand...
Click to collapse
Thanks Brother.
https://drive.google.com/drive/folders/0BzXXEylDgfZ0MU1EVnh3YnAtc0k
now i am downloading this (2.15gb!)....is it legit? (find it on other xda thread)
Instructions
Extract (unzip) the firmware file
Download Odin v3.11.1
Extract Odin ZIP file
Open Odin v3.11.1
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutes
is this right instruction?(sammobile)
Because i am so confused about cse,csx,btu......etc on the other thread
I haven't flashed a different CSC cause I don't want to lose features such as the Mobile data toggle, currently on the Arab firmware since my phone is a Duos, anyone know if BTU has the Mobile data toggle even on 7.0?
daLareid said:
I haven't flashed a different CSC cause I don't want to lose features such as the Mobile data toggle, currently on the Arab firmware since my phone is a Duos, anyone know if BTU has the Mobile data toggle even on 7.0?
Click to expand...
Click to collapse
I didn't try yet another SIM but duos options are there... so Insuppose you wont have any problem with it
Sent from SM-G935FD w/ TapaTalk
Hello folks,
I would like to update my S7 Edge (SM-G935F) to the latest Nougat firmware which if I'm not mistaken arrived UK BTU, which is:
PDA - G935FXXU1DQB3
CSC - G935FOXA1DQB1
I would like to install it via Odin, the most stock way possible (don't want root or custom recovery), just because that I'm tired that it haven't arrived OTA in my country (PT).
But I have a few questions regarding this manually update to the latest firmware of another country:
1) Manually installing the latest update from BTU UK will stop me from receiving future OTA updates? and if no, will I be receiving the OTA updates in the future from UK or PT??
2) My device with the currently firmware has no bloatware from any network (was bought unlocked), if I upgrade to the latest firmware from BTU UK, will I still have no bloatware? (or bloat will be installed?)
3) Will I have any problem from installing a firmware from other country (being both for the same model: SM-G935F)?
Thank you very much in advance! :good:
I have everything ready to make the manual flash, just want to clear this things out before I do it.
Thanks
re: odin flashing
Hgneto said:
Hello folks,
I would like to update my S7 Edge (SM-G935F) to the latest Nougat firmware which if I'm not mistaken arrived UK BTU, which is:
PDA - G935FXXU1DQB3
CSC - G935FOXA1DQB1
I would like to install it via Odin, the most stock way possible (don't want root or custom recovery), just because that I'm tired that it haven't arrived OTA in my country (PT).
But I have a few questions regarding this manually update to the latest firmware of another country:
1) Manually installing the latest update from BTU UK will stop me from receiving future OTA updates? and if no, will I be receiving the OTA updates in the future from UK or PT??
2) My device with the currently firmware has no bloatware from any network (was bought unlocked), if I upgrade to the latest firmware from BTU UK, will I still have no bloatware? (or bloat will be installed?)
3) Will I have any problem from installing a firmware from other country (being both for the same model: SM-G935F)?
Thank you very much in advance! :good:
Click to expand...
Click to collapse
Each country or region has it's own CSC which can be easily flashed
by itself without the need to odin flash a different country's full firmware.
The only time you need to think about bloatware is if you flash a specific
carrier's firmware like perhaps vodaphone and most other carriers add
their own bloatwares. But if you only flash the regional firmware for your
country or region like BTU UK you will not end up with bloatware.
Good luck and happy flashing!
Misterjunky said:
Each country or region has it's own CSC which can be easily flashed without
needing to odin flash a different country's full firmware.
The only time you need to think about bloatware is if you flash a specific
carrier's firmware like perhaps vodaphone and most other carriers add
their own bloatwares. But if you only flash the regional firmware for your
country or region like BTU UK you will not end up with bloatware.
Good luck and happy flashing!
Click to expand...
Click to collapse
What about my question about future OTA updates?
Thank you
re: ota
Hgneto said:
What about my question about future OTA updates?
Thank you
Click to expand...
Click to collapse
Future OTA's will not be a problem if you have flashed
the proper CSC for your country before trying to update
future firmwares.
Misterjunky said:
Future OTA's will not be a problem if you have flashed
the proper CSC for your country before trying to update
future firmwares.
Click to expand...
Click to collapse
So you are saying that first I should change my CSC to the UK, then flash the latest firmware via Odin and won't have to worry about future updates? Can't I simply flash the latest UK BTU firmware and it will change the CSC and get me the latest firmware in once?
Helo Members!
i purchased S7 edge Sm-G935FD a month ago with currently installed firmware 6.0.1 and now i want to update it to Nougat 7.
please help me how can i chose correct official firmware for s7 edge because no OTA update available in my country ( Pakistan) and very confused and dnt know how to chose firmware Baseband /csc/etc.
i manually check on sammobile there are only 2 country listed with Nougat INDIA and Russia.
Hey,
So I too have an S7 Edge in India. The firmware's country doesn't make a difference so you can choose any country's firmware for your specific device. However, make sure it's for your carrier. You can go to www.sammobile.com and download the firmware. Then use ODIN to flash it to your phone
Hope this helped!
there you go. with a new question. i am using a t-mobile s7edge with U firmware. i am in india. the problem is that i need volte service for reliance jio to work which is available only on the ins firmware or indian csc. i tried everything that will provide me with this at last now i hv rooted my s7edge and flashed a indian csc mod which i found in this forum. rooted s7edge is terrible. i want to go back to stock with this current csc and settings. anyone who has an idea do share i'll try and keep on updating this thread. thank you.