fingerprint sensor not working - Huawei P9 Lite Questions & Answers

So, I had cyanogenmod installed and then I forgot to delete my fingerprints before I installed the stock rom. Then I completely formated my phone so I didn`t even have an os and then I installed nougat revolution mod on my phone. When I tested the fingerprint it almost never works.

You messed a lot the phone :/
You should rollback to stock MM firstly.

vozilo said:
So, I had cyanogenmod installed and then I forgot to delete my fingerprints before I installed the stock rom. Then I completely formated my phone so I didn`t even have an os and then I installed nougat revolution mod on my phone. When I tested the fingerprint it almost never works.
Click to expand...
Click to collapse
i think you can't remove fingerprints through twrp, they're stored somewhere else

mjz2cool said:
i think you can't remove fingerprints through twrp, they're stored somewhere else
Click to expand...
Click to collapse
Where can I find them?

i don't know exactly, but i think the only way to remove them is by installing the stock rom and then remove them

mjz2cool said:
i don't know exactly, but i think the only way to remove them is by installing the stock rom and then remove them
Click to expand...
Click to collapse
O please no god why is this the only way

vozilo said:
O please no god why is this the only way
Click to expand...
Click to collapse
i guess because of security

mjz2cool said:
i guess because of security
Click to expand...
Click to collapse
So do I really have to do that?

Potato997 said:
You messed a lot the phone :/
You should rollback to stock MM firstly.
Click to expand...
Click to collapse
Why?

vozilo said:
Why?
Click to expand...
Click to collapse
In order to delete registered fingerprint. It is the only way.

Potato997 said:
In order to delete registered fingerprint. It is the only way.
Click to expand...
Click to collapse
How do I delete It when i'll be on mm

vozilo said:
How do I delete It when i'll be on mm
Click to expand...
Click to collapse
go to fingerprint id settings, and remove them there.

mjz2cool said:
go to fingerprint id settings, and remove them there.
Click to expand...
Click to collapse
What if they will not be there

vozilo said:
What if they will not be there
Click to expand...
Click to collapse
they should be there, otherwise try factory reset from stock rom, and confirm there are no fingerprints stored, and then install cm13 again.

mjz2cool said:
they should be there, otherwise try factory reset from stock rom, and confirm there are no fingerprints stored, and then install cm13 again.
Click to expand...
Click to collapse
Im currnetly on revolution rom

vozilo said:
Im currnetly on revolution rom
Click to expand...
Click to collapse
or that rom, doesn't matter, as long as you delete the stored fingerprints from the stock rom

mjz2cool said:
or that rom, doesn't matter, as long as you delete the stored fingerprints from the stock rom
Click to expand...
Click to collapse
Ok i did everything and it worked thanks

You need to go to the oficial One and erase the fingertios

Related

[FULL DUMP OTA_004 + Oxygen 2.1.3] OxygenOS OTA Dump

Hi !
I found usefull to put all the OTAs together, here they are : http://ns336247.ip-91-121-110.eu/h2o64/ONEPLUS_OTA/
Mirrors are always appreciated
This is apparently the earlier OTA. One went out yesterday as well.
CafeKampuchia said:
This is apparently the earlier OTA. One went out yesterday as well.
Click to expand...
Click to collapse
Yes but this isn't Ota. This is bare firmware
h2o64 said:
Yes but this isn't Ota. This is bare firmware
Click to expand...
Click to collapse
Then the word "OTA" in the title is misleading. Others have been confused by this as well.
CafeKampuchia said:
Then the word "OTA" in the title is misleading. Others have been confused by this as well.
Click to expand...
Click to collapse
It's the name of the file from oneplus...
h2o64 said:
It's the name of the file from oneplus...
Click to expand...
Click to collapse
Suggestion: Change the title to
OxygenOS Full System Dump [OTA_003_all_20151024193]
CafeKampuchia said:
Suggestion: Change the title to
OxygenOS Full System Dump [OTA_003_all_20151024193]
Click to expand...
Click to collapse
I can't change the thread name ... Moderator help ?
UPDATE: Done thnaks to @CafeKampuchia
i have never seen so many shell scripts in a device...
ckret said:
i have never seen so many shell scripts in a device...
Click to expand...
Click to collapse
It's quiet fine actually. Very clean. And finally a MSM8974 with USF. USF is out since 1 year and no one hardly use it.
If I flash this over Hydrogen OS in my chinese OPX, do you know if I'll be getting the updates regarding oxygen os?
jackshot said:
If I flash this over Hydrogen OS in my chinese OPX, do you know if I'll be getting the updates regarding oxygen os?
Click to expand...
Click to collapse
If you have to change your recovery & unlock to flash it, you won't get update.
If else it should be allright.
But I think, your phone will lock the install...
Link : I saw that. I don't knnow what's OK or not...
https://www.reddit.com/r/oneplus/comments/3sf46a/howto_flash_hydrogenos_chinese_opx_to_oxygenos/
Kéno40 said:
If you have to change your recovery & unlock to flash it, you won't get update.
If else it should be allright.
But I think, your phone will lock the install...
Link : I saw that. I don't knnow what's OK or not...
https://www.reddit.com/r/oneplus/comments/3sf46a/howto_flash_hydrogenos_chinese_opx_to_oxygenos/
Click to expand...
Click to collapse
Hmm.. Well I guess it won't be a problem then as long as someone releases the dump file, after oneplus gives every OTA..
Thanks
@h2o64 Have a link to the newer build?
OnePlusOxygen_14_OTA_004_all_201511031712.zip
aosp said:
@h2o64 Have a link to the newer build?
OnePlusOxygen_14_OTA_004_all_201511031712.zip
Click to expand...
Click to collapse
No
h2o64 said:
No
Click to expand...
Click to collapse
Here you go http://pan.baidu.com/wap/link?uk=1040428298&shareid=1411357057
Directly flashing this zip will install the unrooted stock? also would it be possible to upgrade OTA's over this?
aosp said:
Here you go http://pan.baidu.com/wap/link?uk=1040428298&shareid=1411357057
Click to expand...
Click to collapse
This is the full zip for 2.1.2 version ?
Do you know if it's ok to install with TWRP to make a fresh clean install ?
Thanks
aosp said:
@h2o64 Have a link to the newer build?
OnePlusOxygen_14_OTA_004_all_201511031712.zip
Click to expand...
Click to collapse
Can't really get to download this ^^
h2o64 said:
Can't really get to download this ^^
Click to expand...
Click to collapse
OnePlusOxygen_14_OTA_004_all_201511031712.zip - https://goo.gl/0NyHdP
neopbm said:
This is the full zip for 2.1.2 version ?
Do you know if it's ok to install with TWRP to make a fresh clean install ?
Thanks
Click to expand...
Click to collapse
Yes a clean install via twrp is fine, there on flash the 2.1.3 OTA https://drive.google.com/file/d/0B0pr-ZA5b-1pN2hpTEE1T3BIeE0/view

Tweak for Fingerprint scanner needed!

Hey All... Not sure whether this has been answered... But I really wanted to know if there is a way to unlock the phone just by touching the fingerprint scanner and not by pressing it and then touching the scanner...
So I know that this can be done by flashing CM 13. But... I don't want to flash... I wonder whether I can flash a zip update and achieve this... Mine is rooted with TWRP Recovery installed.
Thanks!
I believe you are using official COS, if so you can follow the steps from below link http://forum.xda-developers.com/zuk-z1/development/mod-restored-fingerprint-touch-t3262388/page1
Narasimha12 said:
I believe you are using official COS, if so you can follow the steps from below link http://forum.xda-developers.com/zuk-z1/development/mod-restored-fingerprint-touch-t3262388/page1
Click to expand...
Click to collapse
Hey! Got it... But... Can you tell me what should I do if this didn't work... Like... To delete or remove this?
+∆bhijith said:
Hey! Got it... But... Can you tell me what should I do if this didn't work... Like... To delete or remove this?
Click to expand...
Click to collapse
I have tried it myself and it does work however if you don't like it you can dirty flash your COS to go back.
Narasimha12 said:
I have tried it myself and it does work however if you don't like it you can dirty flash your COS to go back.
Click to expand...
Click to collapse
Bro... 1 last thing... I'm a noob in this! Just to be sure as my COS version is 12.1-YOG4PAS9IG
What's yours? All these confusion because on the thread you quoted the uploader was like use this for a specific COS version and other versions use the other zip... So please help!
+∆bhijith said:
Bro... 1 last thing... I'm a noob in this! Just to be sure as my COS version is 12.1-YOG4PAS9IG
What's yours? All these confusion because on the thread you quoted the uploader was like use this for a specific COS version and other versions use the other zip... So please help!
Click to expand...
Click to collapse
For me it worked on the same version.
Narasimha12 said:
For me it worked on the same version.
Click to expand...
Click to collapse
Awesome! That's all I need... Thanks bro!
Narasimha12 said:
I believe you are using official COS, if so you can follow the steps from below link http://forum.xda-developers.com/zuk-z1/development/mod-restored-fingerprint-touch-t3262388/page1
Click to expand...
Click to collapse
Bro... And yes... I flashed it... All good except it doesn't unlock the phone just by touching it. But all others work like swipe left for recent menu... Is there any way to map it? Thanks!

Full DUMP_Emmc Partitions, MiUI 9.0.10 Global Stable

Hi just want to share full back up Emmc_partitions wich i actually don't know what's for,purpose?? Just in case someone /devs may need this files feel free to use them, also its should be containing aboot files (unlocked)
https://drive.google.com/file/d/1SDfjTUm38XvcBYSOdsV6WlsTC7nJXkyr/view?usp=drivesdk
Decided flashing lineage OS by @xuefer tonight, hell yeaa awesome, smooth,stable enough as dailly, missing the substratum set,and my beloved themes..keep it up sir
SH1M4BD3 said:
Decided flashing lineage OS by @xuefer tonight, hell yeaa awesome, smooth,stable enough as dailly, missing the substratum set,and my beloved themes..keep it up sir
Click to expand...
Click to collapse
Substratum not supported but working...
I'm still stucked and adding MI account
TioCareca said:
Substratum not supported but working...
Click to expand...
Click to collapse
Yup working as legacy mode, i'ill wait full Oms builds
ridershahmir said:
I'm still stucked and adding MI account
Click to expand...
Click to collapse
I'm the lucky one, got it pre - unlocked from the seller, upgrading to miui 9, then flashed LOS
i dont think this is full emmc dump as its size is only 17.6mb.full emmc dump size would be in 10+ gb
..
Is there a way to unlock unofficial? a modified emmc?
danielamarta said:
Is there a way to unlock unofficial? a modified emmc?
Click to expand...
Click to collapse
No, no way.
ekin_strops said:
No, no way.
Click to expand...
Click to collapse
After unlock, can we relock again?
danielamarta said:
After unlock, can we relock again?
Click to expand...
Click to collapse
Of course, you can re-lock it.
ekin_strops said:
Of course, you can re-lock it.
Click to expand...
Click to collapse
How to relock it? By flashing full rom?
danielamarta said:
How to relock it? By flashing full rom?
Click to expand...
Click to collapse
Check out this. http://en.miui.com/thread-279195-1-1.html

There are ways to install OnePlus apps on AOSP rom?

I was wondering if i can install OnePlus official apps on AOSP roms..
I want to try new roms and i was wondering if i can do it.
yot2703 said:
I was wondering if i can install OnePlus official apps on AOSP roms..
I want to try new roms and i was wondering if i can do it.
Click to expand...
Click to collapse
Which apps do mean? Have you tried restoring a backup of that app on aosp?
strongst said:
Which apps do mean? Have you tried restoring a backup of that app on aosp?
Click to expand...
Click to collapse
No no.. i didnt tried anything
I just want the OnePlus Camera.
yot2703 said:
No no.. i didnt tried anything
I just want the OnePlus Camera.
Click to expand...
Click to collapse
https://forum.xda-developers.com/oneplus-5/themes/mod-oneplus-camera-jpg-quality-to-100-t3714595
biohaz55 said:
https://forum.xda-developers.com/oneplus-5/themes/mod-oneplus-camera-jpg-quality-to-100-t3714595
Click to expand...
Click to collapse
Getting error while patching on TWRP.
yot2703 said:
Getting error while patching on TWRP.
Click to expand...
Click to collapse
It's a Magisk module. Install as such with Magisk.
biohaz55 said:
https://forum.xda-developers.com/oneplus-5/themes/mod-oneplus-camera-jpg-quality-to-100-t3714595
Click to expand...
Click to collapse
Don't you need the libs too or a rom with the camera libs like cnp?

[MOD][9.0][J330F(N)] Extreme MOD for Samsung Galaxy J3 2017

Please close this thread. A new rom/port and kernel is coming
Changelog:
V1. First release
V1.0.1 Fixed error 6 in TWRP.
V1.0.2 Really fixed error 6 in TWRP and removed some mods.Will put them back soon.
V1.1 Fixed error 7 in TWRP
Next updateroduct ported from S10,mounted as /product and symlinked as /system/product.
reserved2
reserved3
Will this work on CSG7 pie
Benfatica said:
Will this work on CSG7 pie
Click to expand...
Click to collapse
Yes
Next update:S10 Omc/Odm/Csc ported to J3 2017 and mounted as product and its decrypted.
Got these errors
Benfatica said:
Got these errors
Click to expand...
Click to collapse
Can you try again with V1.0.1?
If it still doesnt work go to twrp advanced copy logs and send them here.
ExtremeGrief said:
Can you try again with V1.0.1?
If it still doesnt work go to twrp advanced copy logs and send them here.
Click to expand...
Click to collapse
Ok
Didn't work here is the log
Benfatica said:
Didn't work here is the log
Click to expand...
Click to collapse
The error is because misplaced some files.I will fix it in new update
ExtremeGrief said:
The error is because misplaced some files.I will fix it in new update
Click to expand...
Click to collapse
Ok
Benfatica said:
Ok
Click to expand...
Click to collapse
@Benfatica
Hi,Can you try again to install?
ExtremeGrief said:
@Benfatica
Hi,Can you try again to install?
Click to expand...
Click to collapse
Still getting errors
Benfatica said:
Still getting errors
Click to expand...
Click to collapse
Try again with V1.1
Benfatica said:
Still getting errors
Click to expand...
Click to collapse
Hello??????
I will try later
It successfully flashed but nothing happened like face lock. I don't see anything
Benfatica said:
It successfully flashed but nothing happened like face lock. I don't see anything
Click to expand...
Click to collapse
But did ut debloat apps?

Categories

Resources