Related
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review.
Download Links
CyanogenMod:
Technologist Guild
Google apps:
OpenGapps
Note: You need to flash the package right after you install the ROM. If you boot up and then go back and flash it, your phone won't boot.
Please check out the Pixelv1 Google + community for the latest updates on this ROM and more development for the Pixelv1 : https://plus.google.com/communities/108017236726038583364
XDA:DevDB Information
CyanogenMod13 for Lava Pixelv1, ROM for the Lava Pixel V1
Contributors
MSF Jarvis, varun.chitre15,devansh21,DHARMESH17,Dharma Samsthapana
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: TWRP 3.0.2-0 official recovery
Version Information
Status: Stable
Created 2016-06-24
Last Updated 2016-06-24
Known Bugs :
1) Toggling Wifi and immediately locking device causes all services to crash and phone won't show up the lock screen at all, shutting down after a few minutes.
WORKAROUND : Enable Wifi scanning from Settings>WiFi>Advanced which will consume more battery but is a reliable fix for this issue. Many thanks to @srinu427 who provided the original fix in his Resurrection Remix thread.
WORKAROUND 2 : Do not lock your display before ten minutes of enabling or disabling WiFi. Yes, this is cumbersome, but effective.
2) Camera isn't focusing, common to all ported ROMs as well, will investigate and fix this soon.
Changelog
20160624
- Initial Release
20160629
- Fixed sensors bug, thanks to @aaryan45's quick eye that spotted my mistake.
Does
aaryan45 said:
Does It Make Sense Building ROM having Same Bugs!! @MSF Jarvis...!!
Click to expand...
Click to collapse
Yes it does, since I have a better chance at fixing it, plus I can add more features as my users will ask for, which anyone's _ported_ ROMs won't be able to.
And I believe this is a question you should be asking yourself first.
Sent from my seedmtk using XDA Labs
aaryan45 said:
Does It Make Sense Building ROM having Same Bugs!! @MSF Jarvis...!!
Click to expand...
Click to collapse
Bro make sense to making something perfect and MSF Jarvis doing that
Making things perfect
And bro it is best stable ROM like srinu's resurrection remix @MSF Jarvis @ srinu427
devansh21 said:
Bro make sense to making something perfect and MSF Jarvis doing that
Making things perfect
And bro it is best stable ROM like srinu's resurrection remix @MSF Jarvis @ srinu427
Click to expand...
Click to collapse
Ressurrection Remix Has Same Bugs...Like The ROMS Which I Ported!!!
aaryan45 said:
Ressurrection Remix Has Same Bugs...Like The ROMS Which Ported!!!
Click to expand...
Click to collapse
Bro yes but I loved it
I know there is some bugs but not like silly
Silly-like your purenexus and du bugs -server error and sim not working even after u port it second time so silly bugs
As per @devansh21 advice I'm deleting my ported resurrection remix as he said @MSF Jarvis is building it. In case any one needs the link to my port:
https://drive.google.com/open?id=0B73XQayK1KUsX29ocGFGNDh4S2s
devansh21 said:
Bro yes but I loved it
I know there is some bugs but not like silly
Silly-like your purenexus and du bugs -server error and sim not working even after u port it second time so silly bugs
Click to expand...
Click to collapse
I Can't Do anything With Server Error....Sim2 not working in PureNexu...Plz Check you Sim Slot @MSF Jarvis @devansh21...And I Fixed Camera Focus Issue
So, after aaryan45's unprovoked rant, here's the change log for the next build that will arrive, ETA 10 days.
Sent from my seedmtk using XDA Labs
srinu427 said:
As per @devansh21 advice I'm deleting my ported resurrection remix as he said @MSF Jarvis is building it. In case any one needs the link to my port:
https://drive.google.com/open?id=0B73XQayK1KUsX29ocGFGNDh4S2s
Click to expand...
Click to collapse
My builds are available at https://roms.technologistguild.com/ in the rr folder. Feel free to let others know about it and encourage healthy testing, since I currently can't, with my super limited connectivity at my hometown.
Sent from my seedmtk using XDA Labs
Did a premature build, fixing the sensors issue as reported by @devansh21 and fixed by @aaryan45, link in the OP
Sent from my seedmtk using XDA Labs
This rom is not stable
Screen always lock switch off
No radio no hotspot working no use
Bkpskn said:
This rom is not stable
Screen always lock switch off
No radio no hotspot working no use
Click to expand...
Click to collapse
Screen not turning on after locking only happens when WiFi is toggled and has been mentioned in the known bugs list, so no point in screaming about it. No radio is an intentional design choice and may be changed in the near future. Hotspot not working is not a priority for me and won't be so anytime soon.
Sent from my seedmtk using XDA Labs
So we no use wifi and hotspot because of screen lock.that is why better original ROM
Bkpskn said:
So we no use wifi and hotspot because of screen lock.that is why better original ROM
Click to expand...
Click to collapse
So please by all means sir, use stock ROM or shower some of your greatness on us and fix these bugs.
Sent from my seedmtk using XDA Labs
Bkpskn said:
This rom is not stable
Screen always lock switch off
No radio no hotspot working no use
Click to expand...
Click to collapse
We all know ROM is not stable.....If U Want Bugs-free ROM.....Then Help Us To Fix Bugs Or Wait For SomeTime...!!
Enjoy Stock Till Then!!
Please check our Google + community for the latest updates on this ROM and more development for the Pixelv1 : https://plus.google.com/communities/108017236726038583364
Thread closed at OP request
RADIOACTIVE KERNEL
for CM13 Based Roms!
Code:
/* *** Disclaimer
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
hi XDA community, i'm here to share with you my project with the oneplus3, my primary goal is to provide a stable and smooth experience while let user tinker with a good amount of useful features,so here we go!!
Current Features
General List:
Compiled with Linaro 5.3 toolchain
Graphite and Ofast optimization flags
Anykernel Ramdisk compatible with all roms
Zram support
Uksm
Option to enable/disable Fsync
Dynamic Fsync
Noop,Deadline, Cfq, Bfq, Noop, Fiops, Sio, Sioplus, Zen i/o schedulers
Ondemand,Conservative,Performance,Interactive,Bluactive,Elementalx,Impulse,Zzmoove governors
Enableb additional tcp congestion algorithms (westwood default)
Enabled LMK
Frandom support
Laptop mode
Power efficient workqueues
Kcal Control: Colors, Saturation, Huge, Contrast and more
And much more to come....
[ RADIOACTIVE KERNEL INSTALL ]
Instructions:
* Boot into Recovery
* (Recommended) Make a complete backup of entire rom
* Flash Zip
* Reboot
* Install your prefered kernel tweaker app
* Enjoy!!!
CHANGELOG
HERE
DOWNLOADS
HERE
THANKS!!!!
Thanks and Credits to developers
Of course, I had never been able to create all that by my own. So I want to give credits to the really good developers around, that have given me all the inspiration and from which I cherry picked lots of the implemented functionalities:
* LordBoeffla
* ZaneZam
* Ak
* Flar2
* F4uzan
* engstk
* imoseyon
* Yank555
* Hardcore
* Chainfire
* AndreiLux
* Netarchy
* Gokhanmoral
* Entropy512
* Faux
* Harunjo
* FranciscoFranco
* moludo
* Lozo2010
... I just hope I did not forget someone. If so, please let me know and I will add you of course.
Thanks to all of you for your great work
XDA:DevDB Information
Radioactive Reborn kernel, Kernel for the OnePlus 3
Contributors
acuicultor, Lozo2010
Source Code: https://github.com/OneRomOne/android_kernel_oneplus_msm8996
Kernel Special Features:
Version Information
Status: Testing
Created 2016-09-18
Last Updated 2016-09-18
Reserved
Reserved
Reserved
Reserved2
WHOOOT!!! Radioactive kernel is heree!! ?
Inviato dal mio ONEPLUS A3003 utilizzando Tapatalk
Great man congrats for this awesome kernel.
Radioactive
Awesome thanks
Seriously, stable? Ofast? Goodness man. Why not O3? And btw you said over clock and the normal itself is 2150 :/
chinmai560621 said:
Seriously, stable? Ofast? Goodness man. Why not O3? And btw you said over clock and the normal itself is 2150 :/
Click to expand...
Click to collapse
Thanks for your warm welcome,seems like you know a lot, why you don't build your own kernel with o3 instead of ofast?
Enviado desde mi Z1 mediante Tapatalk
chinmai560621 said:
Seriously, stable? Ofast? Goodness man. Why not O3? And btw you said over clock and the normal itself is 2150 :/
Click to expand...
Click to collapse
Trolling bud?
Is this the kernel that comes default with Nuclea? or are you doing seperate builds now @acuicultor
ritchiedrama said:
Is this the kernel that comes default with Nuclea? or are you doing seperate builds now @acuicultor
Click to expand...
Click to collapse
Same kernel just with anykernel ramdisk.
Great to see this thread! So people can benefit from this fantastic kernel. Gracias amigo.
Okay cool, so I don't need to flash this if I use Nuclea then
Thanks for the hard work
acuicultor said:
Same kernel just with anykernel ramdisk.
Click to expand...
Click to collapse
Thanks @acuicultor, good see here, will buy op3 and sell zuk?
For zuk your rom and kernel is the Best
Enviado desde mi ONEPLUS A3003 mediante Tapatalk
Great job, you kermel is amazing,
Enviado desde mi ONEPLUS A3003 mediante Tapatalk
acuicultor said:
Thanks for your warm welcome,seems like you know a lot, why you don't build your own kernel with o3 intead of ofast?
Enviado desde mi Z1 mediante Tapatalk
Click to expand...
Click to collapse
I really don't understand. In what way did I offend you? That was supposed to be a suggestion. Sorry anyways for making you try to speak "savage"
Awesome to see your kernel here with the op3. I used your opo kernel quite a bit, especially with Darkobas ROM.
@acuicultor how possible would it be to make this work with OOS? Too much work/not possible?
ritchiedrama said:
@acuicultor how possible would it be to make this work with OOS? Too much work/not possible?
Click to expand...
Click to collapse
Sorry but not interested to give support to oos for now, may be in the future if i have time i think about it.
@acuicultor with which app can I change schedulers on your kernel? Will EX Kernel manager suffice?
DISCLAIMER:
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Feature:
Just DT2W (by vasishath), 2 extra power state (268mhz and 2649mhz{MI4 only}) and gpu overclock.
There are some kernel version, one with just DT2W, one with also CPU and GPU OC
The OC versions may not work on your device, as oc is different for every phone.
If the oc kernel boots fine it can be unstable, you can increase cpu voltage (!DANGER) to get more stability with Kernel auditor, with that app you can also disable gpu oc and downvolt cpu power states.
Download here http://forum.xda-developers.com/devdb/project/?id=17692#downloads
XDA:DevDB Information
GasL Kernel, Kernel for the Xiaomi Mi 3
Contributors
ronfante, Dr. Ramm
Source Code: https://github.com/Ronfante/android_kernel_xiaomi_cancro
Kernel Special Features: DT2W
Version Information
Status: Testing
Created 2016-11-05
Last Updated 2016-11-06
Reserved
So... thx u i flattered.... can u ask me why u partly remove faux sound here?
btw u forget to say thx vasishath for dt2w
Dr. Ramm said:
So... thx u i flattered.... can u ask me why u partly remove faux sound here?
btw u forget to say thx vasishath for dt2w
Click to expand...
Click to collapse
I don't need it
You are right, I'm still updating the thread. :angel:
thanks for your work can you support MIUI please ?
ronfante said:
I don't need it
Click to expand...
Click to collapse
so then better revert faux sound commit
harris123424 said:
thanks for your work can you support MIUI please ?
Click to expand...
Click to collapse
Maybe I'll try something when miui with android N will be relased
Dr. Ramm said:
so then better revert faux sound commit
Click to expand...
Click to collapse
Nice advice
nice work , glad to see a custom kernel
通过我的 MI 3W 上的 Tapatalk发言
Touch does not work on Mi3w after flashing this kernel...tried different versions but failed to get touch work.
working pretty fine in mi4w, let's see how it behaves the rest of the day, thanks!
Enviado desde mi MI 4 mediante Tapatalk
ronfante said:
Maybe I'll try something when miui with android N will be relased
Mi3/Mi4 will not update N version MIUI...It will take MIUI 9 with marshmallow..
Click to expand...
Click to collapse
saurabhirsee said:
Touch does not work on Mi3w after flashing this kernel...tried different versions but failed to get touch work.
Click to expand...
Click to collapse
Same here! Mi3w.
saurabhirsee said:
Touch does not work on Mi3w after flashing this kernel...tried different versions but failed to get touch work.
Click to expand...
Click to collapse
Pallmalli said:
Same here! Mi3w.
Click to expand...
Click to collapse
I've a Mi4 and I forgot to edit the touch driver for Mi3, I've uploaded the mi3 version on download. Now it should works fine, let me know if you try.
ronfante said:
I've a Mi4 and I forgot to edit the touch driver for Mi3, I've uploaded the mi3 version on download. Now it should works fine, let me know if you try.
Click to expand...
Click to collapse
Touch is working fine now.... Gpu oc present ...cpu oc not included for mi3w....
Charging rate is slow on Cm14.1 (by shivam kumar jha) i.e. limited to 700mA though in ampere app... maximum USB current is now shown as 2A as compared to others that sow 1.5mA
Rest all good..... got 59k+ score on antutu
See if u could do something for charging rate or correct me if it is a ROM bug and not the kernel (i thought so as i got different rate on every kernel)
saurabhirsee said:
Touch is working fine now.... Gpu oc present ...cpu oc not included for mi3w....
Charging rate is slow on Cm14.1 (by shivam kumar jha) i.e. limited to 700mA though in ampere app... maximum USB current is now shown as 2A as compared to others that sow 1.5mA
Rest all good..... got 59k+ score on antutu
See if u could do something for charging rate or correct me if it is a ROM bug and not the kernel (i thought so as i got different rate on every kernel)
Click to expand...
Click to collapse
Good, yes on mi3 there is only an extra p state with undervolt and deep sleep undervoltage.
I don't know, mine is charging at 950mA with a stadart 1000mAh charger.
Disclaimer
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Hi, I am totally noob, not a developer
There is nothing special with this kernel
My project is only adding some features into the CM based kernel source, features that I like and I want to share with people here
Credit is not mine, all of the credits are belong to many developers out there who deserved
redkancut kernel :
- Based on lineageos kernel source for cancro
- Compile with UBER Toolchain GCC 7.x
- Fast Charging
- Add CPU Clockspeed 268 MHz
- Add GPU Clockspeed 27 MHz
- ElementalX CPU Governor by @flar2
- ZZMoove CPU Governor by @zanezam
- Intellim CPU Governor by @faux123
- Barry_Allen CPU Governor
- Smartmax CPU Governor
- InteractiveX CPU Governor
- Pegasusq CPU Governor
- Alucard CPU Governor and Hotplug by @alucard_24
- AutoSMP Hotplug
- Thermal driver by @franciscofranco
- Faux sound by @faux123
- Adreno Idler
- KCAL Driver by @savoca
- Add sio, sioplus, vr, and zen i/o scheduler
- Enable some TCP Congestion Algorithm (illinois, lp, vegas, veno, westwood)
- Frandom based on http://www.billauer.co.il/frandom.html
- Add doubletap2wake and sweep2wake by @vasishath (use s2w version)
- Some little optimization
Credits :
@Dr. Ramm as mentoring me from the scratch
@linuxxxx
many other developers out there
DOWNLOAD
redkancut
DT2W version for MI3 download here
Don't like my work?
No problem at all
XDA:DevDB Information
redkancut, Kernel for the Xiaomi Mi 3
Contributors
travarilo
Source Code: https://github.com/travarilo/android_kernel_xiaomi_cancro/tree/7x
Kernel Special Features: Nothing Special
Version Information
Status: Stable
Created 2016-11-06
Last Updated 2017-08-04
Finally shared here:
My review overall stable. I use this on : RR, beanstalk 6 & 7, and many others. Some aosp i forgot booted and no wifi trouble.
Finally new kernels coming.. Thanks dude
Thanks for your work! Can you support MIUI please?
Nice work man
harris123424 said:
Thanks for your work! Can you support MIUI please?
Click to expand...
Click to collapse
I was stuck with wifi module..
travarilo said:
I was stuck with wifi module..
Click to expand...
Click to collapse
Can you ask for help by vasishath?
Don't know why i am having slow internet speed after flashing this
Edit: Sorry it was something wrong with my LAN
Please add OC and UC.
touch not working on my mi3.. using the one with double tap to wake
rom using crdroid 7.1
the kernel name is so epic! :laugh::laugh:
gonna try this one with the latest beanstalk ROM
Akishima said:
the kernel name is so epic! :laugh::laugh:
gonna try this one with the latest beanstalk ROM
Click to expand...
Click to collapse
Yeah only Indonesian knows the meaning. Salam kancut gan.:good:
travarilo said:
I was stuck with wifi module..
Click to expand...
Click to collapse
Zeurionx had two kernel versions, one with WiFi module and one without. Maybe you can try to inspect the kernel? Thanks for your effort anyways.
Sent from my MI 3W using Tapatalk
touchscreen is dead with the latest BS 7.1 version. flashed the DT2W one.
I tried it not dt2w. Firstly it was fine, then anomalies start. In the beginning apps closed immediately after opening them then I rebooted. The boot sequence run completely but after I reach the sim lock, the device is shutting down (the power off charging screen appears because the charger is connected). Using:
Mi4 LTE 3/16
NitrogenOS 10.31
Android 7.0_r14
Mr.C11 said:
I tried it not dt2w. Firstly it was fine, then anomalies start. In the beginning apps closed immediately after opening them then I rebooted. The boot sequence run completely but after I reach the sim lock, the device is shutting down (the power off charging screen appears because the charger is connected). Using:
Mi4 LTE 3/16
NitrogenOS 10.31
Android 7.0_r14
Click to expand...
Click to collapse
Aint nitrogen based on aosp 7.0/7.1? This work perfectly on cm13/14 based rom though.
SnajperKRS said:
Please add OC and UC.
Click to expand...
Click to collapse
I didn't find many advantages from this, but let's see..
jellyfeels said:
touch not working on my mi3.. using the one with double tap to wake
rom using crdroid 7.1
Click to expand...
Click to collapse
1immortal said:
touchscreen is dead with the latest BS 7.1 version. flashed the DT2W one.
Click to expand...
Click to collapse
may you guys check this one https://www.androidfilehost.com/?fid=457095661767112374
and please give me any feedback
stratosk21 said:
Zeurionx had two kernel versions, one with WiFi module and one without. Maybe you can try to inspect the kernel? Thanks for your effort anyways.
Sent from my MI 3W using Tapatalk
Click to expand...
Click to collapse
yup, I never stop trying, hope I'll get flashlight..
Mr.C11 said:
I tried it not dt2w. Firstly it was fine, then anomalies start. In the beginning apps closed immediately after opening them then I rebooted. The boot sequence run completely but after I reach the sim lock, the device is shutting down (the power off charging screen appears because the charger is connected). Using:
Mi4 LTE 3/16
NitrogenOS 10.31
Android 7.0_r14
Click to expand...
Click to collapse
It's pretty weird, I tried reboot while charging on that build and it was working fine no problem at all..may you give your last_kmsg, let me check..
Last night i have installed the zero version on my Beanstalk 7.1. (Mi4w). No problems until now.
travarilo said:
I didn't find many advantages from this, but let's see..
may you guys check this one https://www.androidfilehost.com/?fid=457095661767112374
and please give me any feedback
yup, I never stop trying, hope I'll get flashlight..
It's pretty weird, I tried reboot while charging on that build and it was working fine no problem at all..may you give your last_kmsg, let me check..
Click to expand...
Click to collapse
i already try the test kernel. still not working for me.. even after i change to aicp 12.1
travarilo said:
It's pretty weird, I tried reboot while charging on that build and it was working fine no problem at all..may you give your last_kmsg, let me check..
Click to expand...
Click to collapse
Reflashed it again, I will if failure appears
Code:
/*
* Your warranty is now void.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
So guys let me introduce my self. I'm not a developer, I'm just a noob and just started learning about android a month ago.
Now I want to share my project to you which is based on @ssasin.monish 's source, thanks to him for letting me use his source.
I'm only adding some features that I like, and I hope you like it too
Credit is not mine, all of the credits are belong to many developers out there who deserved
Features
Based on @ssasin.monish 's kernel source
Kernel updated with latest 3.4.x linux version
Compiled with UBERTC 5.3
Enable adreno_idler by default
Various minor kernel tweaks
KCAL Driver by @savoca
Alucard Hotplug by @alucard_24
Doubletap2wake and sweep2wake by @vasishath
2 extra power state (268mhz and 2649mhz{MI4 only}) by @ronfante
Additional governors : Abyssplugv2, adaptive, alucard, bioshock, dancedance, darkness, hyper, impulse, lazy, lionheart, nightmare, ondemandplus, optimax, pegasusq
Additional scheduler : bfq, deadline, fifo, noop, row, sio, tripndroid, vr, zen
And more to come (read changelog)
DOWNLOAD KERNEL ZIP
Rom Tested
CM14.1, RR 5.8.0, Mokee 7.1, Nitrogen OS, Slim7, DU 11, CM13
Credits to developers:
Of course, I had never been able to create all that by my own. So I want to give credits to the really good developers around, that have given me all the inspiration and from which I cherry picked lots of the implemented functionalities:
@ssasin.monish, @ronfante, @vasishath, @travarilo, @linuxxxx, @STRYDER~007 and everyone else who helped me out.
(PM if i missed out someone)
XDA:DevDB Information
Apollo, Kernel for the Xiaomi Mi 3
Contributors
farchanrifai, http://github.com/farchanrifai/Foxy
Kernel Special Features:
Version Information
Status: Beta
Beta Release Date: 2017-01-09
Created 2016-12-07
Last Updated 2017-04-02
Changelog
Code:
28-04-2017
- Skymo
- "A lot of changes"
02-04-2017
- OSS Camera HAL support (Thanks to @vasishath)
- Remove some cpu gov
- Add zzmoove & smartmax_eps
- Add Intelliplug
- KCAL support
- Enable some Congestion Algorith
- Kernel Power Suspend
- Add Input boost support
- Adreno Idler
- Remove CPU UC & OC
- Remove dt2w & s2w
- Minor changes & Upstream LOS changes
09-01-2017
- Rebranded to Apollo
- Used ronfante's source as base
- Make alucard as default hotplug
- Enable adreno idler
- Add msm_hotplug by myfluxi
- Add intelli_thermal_v2 by [user=3332811]@faux123[/user]
- Include latest CM changes
21-12-2016
- Upstream changes (hotspot fix)
19-12-2016 19.16
- Enable some TCP congestion : illinois, lp, reno, vegas, veno, westwood
- Additional governors : blu_active, zzmoove, intellim, elementalx, yankactive
- Set westwood as default
- Minor kernel tweaks
07-12-2016 19.16
- Updated download link
- Added no-dttw version
07-12-2016 13.00
- Initial release
Finally, you share here. Congrats
Great :good:
Can u add a version without dtw and stw plz
latest Nitrogen OS, touchscreen doesn't work
tjahjo.djoko said:
Finally, you share here. Congrats
Click to expand...
Click to collapse
@ssasin.monish said:
Great :good:
Click to expand...
Click to collapse
Thank you :fingers-crossed:
reality1234 said:
Can u add a version without dtw and stw plz
Click to expand...
Click to collapse
Sure, I'm working on it. Will share it here on sunday/monday maybe
Edit:no-dttw version is up. Enjoy!
1immortal said:
latest Nitrogen OS, touchscreen doesn't work
Click to expand...
Click to collapse
what device? Mi 3 or Mi 4 ?
farchanrifai said:
Thank you :fingers-crossed:
Sure, I'm working on it. Will share it here on sunday/monday maybe
what device? Mi 3 or Mi 4 ?
Click to expand...
Click to collapse
Mi3, sorry for not stating that
1immortal said:
Mi3, sorry for not stating that
Click to expand...
Click to collapse
+1 touchscreen doesn't work on my Mi3 either.
1immortal said:
Mi3, sorry for not stating that
Click to expand...
Click to collapse
Please wait, I'm making a new build, I will pm u when it's ready
reality1234 said:
Can u add a version without dtw and stw plz
Click to expand...
Click to collapse
No-dttw version is up, I've updated the download link. Enjoy :fingers-crossed:
any progress with the d2tw and a Mi3 screen issue ?
farchanrifai said:
No-dttw version is up, I've updated the download link. Enjoy :fingers-crossed:
Click to expand...
Click to collapse
Thanks a lot sir
Edit: Sir the link is taking me into the login page Plz check the link
Hello @farchanrifai Unfortunately i can't download the file. Have to log in on androidfilehost. After I have logged in there is a message that the access is denied!
Thx!
reality1234 said:
Thanks a lot sir
Edit: Sir the link is taking me into the login page Plz check the link
Click to expand...
Click to collapse
ydd0ras said:
Hello @farchanrifai Unfortunately i can't download the file. Have to log in on androidfilehost. After I have logged in there is a message that the access is denied!
Thx!
Click to expand...
Click to collapse
Link updated. I'm sorry, my bad
Any plan for mi4 android 6.0 miui rom?
Sent from my MI 4W using Tapatalk
farchanrifai said:
Link updated. I'm sorry, my bad
Click to expand...
Click to collapse
Many thanks. I have flashed the no dttw version on my Mi4w, but it won't start anymore. Any idea?
Sent from my MI 4W using XDA-Developers mobile app
Mi3 screen death
Waiting for new release.
ydd0ras said:
Many thanks. I have flashed the no dttw version on my Mi4w, but it won't start anymore. Any idea?
Click to expand...
Click to collapse
Power off and wait for 5 min . so that it cools down a bit then start your phone..I know it sounds weird but I got it working on latest nitrogen os.. Phone actually shuts off when temp increases
reality1234 said:
Power off and wait for 5 min . so that it cools down a bit then start your phone..I know it sounds weird but I got it working on latest nitrogen os.. Phone actually shuts off when temp increases
Click to expand...
Click to collapse
Wow, that's it. I didn't think about it. And my device was really hot after I have performed a nandroid backup before flashing the kernel. Just flashed it again without problems. It seems very good on first sight. Using alucard. Very nice, many thanks.
Sent from my MI 4W using XDA-Developers mobile app