Google TV rebooting alone - Android Stick & Console RockChip based Computers

Hello all members,
I purchased two years ago , Quad Core Android 4.4 Mini PC Google TV Box WiFi Bluetooth 2GB/8G CX-919 S19K.
I connected it to my TV with HDMI cable, after that set up connection to WiFi network box.
Few weeks ago and randomly my device started rebooting alone. Sometimes this happen when I run an app and sometimes without it.
Version: 4.4.2
Kernel: 3.0.36+
[email protected] #288
Dec 1 CST2014
Can you give me any advice how to solve this cause?
Thanks
Stanislav

I have one too with the same problem. I just put the stick by side. I dont find any solution

Related

[Q] Widi/Miracast working with Note 3?

I was just wondering if anyone used Widi/miracast with Note 3. I have LG TV with built in Widi, and its very neat, works really well with my laptop. I remember reading few months ago that we use that with Galaxy S4. So I assume it should be working with Note 3 but none of the reviews mention that.
Has anyone tried using it with Note 3? Does it work? If yes, how do we set this up?
note3or2 said:
I was just wondering if anyone used Widi/miracast with Note 3. I have LG TV with built in Widi, and its very neat, works really well with my laptop. I remember reading few months ago that we use that with Galaxy S4. So I assume it should be working with Note 3 but none of the reviews mention that.
Has anyone tried using it with Note 3? Does it work? If yes, how do we set this up?
Click to expand...
Click to collapse
If no one else lets you know n the meantime I will have a chance to test this tomorrow.
The builtin screen mirroring in the system setting doesn't work? It needs allshare cast?
In using allShare cast dongle from Sammy and Is Working fine With the screen mirroring
Sent from my SM-N9005 using Tapatalk 4
sohebq said:
The builtin screen mirroring in the system setting doesn't work? It needs allshare cast?
Click to expand...
Click to collapse
Last Android phone I used was Galaxy S3 and that was on 4.1 (widi/miracast was included after 4.2 in android) so I personally have not tried it but I saw a video on youtube where he used S4 with netgear dongle and it worked. By that logic it should work with any widi enabled devise, but can't be sure untill someone tries it.
note3or2 said:
Last Android phone I used was Galaxy S3 and that was on 4.1 (widi/miracast was included after 4.2 in android) so I personally have not tried it but I saw a video on youtube where he used S4 with netgear dongle and it worked. By that logic it should work with any widi enabled devise, but can't be sure untill someone tries it.
Click to expand...
Click to collapse
I've used my Netgear one with my S4, expect it works here, but will confirm when I have a chance.
NZtechfreak said:
If no one else lets you know n the meantime I will have a chance to test this tomorrow.
Click to expand...
Click to collapse
Thanks buddy, Waiting for your test result. Hopefully it will work and I wont have to buy Dongle from Samsung.
screencast works perfectly with my note3 and my belkin screencast hdmi-adapter!
the important trick is:
you have to long-click on the screencast device in in the screencast settings, then the option "connect with PIN" appears! with the PIN displayed on the TV you are now able to connect!
Sent from my SM-N9005 using XDA Premium 4 mobile app
n3 sd800 Works with my p2tv 3000
Sent from my SGH-T889 using xda app-developers app
TML1504 said:
screencast works perfectly with my note3 and my belkin screencast hdmi-adapter!
the important trick is:
you have to long-click on the screencast device in in the screencast settings, then the option "connect with PIN" appears! with the PIN displayed on the TV you are now able to connect!
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
This is amazing, this is one killer feature for me. Thank you guys for confirming.
Sent from my iPhone using Tapatalk - now Free
Not working for me.
TML1504 said:
screencast works perfectly with my note3 and my belkin screencast hdmi-adapter!
the important trick is:
you have to long-click on the screencast device in in the screencast settings, then the option "connect with PIN" appears! with the PIN displayed on the TV you are now able to connect!
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Can you list versions for me? I can't seem to get mine working.
I have Note 3 on US Cellular, Belkin Screencast A100 with firmware 3.5.28.0, and I've tried both the updated AllShare Cast Dongle S/W Update v1.2.2829 and the previous version (not sure what number though).
The adapter receives the pin request and displays a pin, and the phone asks for the pin and attempts to connect, but fails every time. I don't want to have to buy a new adapter as I use my Belkin for both my laptops and kinda doubt the Samsung model would be as compatible (although shouldn't they all be if they are all using the same standard? But whatever....). Any thoughts?
I have several miracast devices and receivers and note 3 and S4 and nexus 7 2013 work fine with net gear ptv 3000, lg bdp 3000 bluray player, Panasonic miracast streamer with usb port that supports 1tb hard disk etc. See proof in my YouTube uploads where I have several miracast uploads for note 3, s4, nexus 7, s3, Sony xperia zl, Intel widi laptop etc in my YouTube uploads. See my tag line below for more links than posted here or see some links here
http://www.youtube.com/watch?v=e0MikjCGq_I
Miracast works fine with screen mirroring toggle no need for allshare. Works fine in 1080p dolby sound. Works great on the s4 too for everything. See video proof in my YouTube upload called miracast better than chromecast on s4 where I show streaming gaming music etc http://www.youtube.com/watch?v=JxSJ57Q3zak
Widi laptop should work with same dongles http://www.youtube.com/watch?v=UZaDe-P_74s
psp1024 said:
The adapter receives the pin request and displays a pin, and the phone asks for the pin and attempts to connect, but fails every time. I don't want to have to buy a new adapter as I use my Belkin for both my laptops and kinda doubt the Samsung model would be as compatible (although shouldn't they all be if they are all using the same standard? But whatever....). Any thoughts?
Click to expand...
Click to collapse
I bought a Belkin Screencast about a year ago when I got my Sony Laptop which had Widi. I could make a connection, but it would disconnect every few minutes. It was useless. I ended up buying a long HDMI cable to connect my laptop to my TV. I never knew if the problem was with the Belkin or my Sony.
Forward one year.....
I found my new Nexus 7 has Miracast. Earlier today, I took my Belkin Screencast out of the closet and tried to connect it to my Nexus without any success. I then connected it to my computer and updated it's firmware from 2.9 to 3.5. After the update, my laptop wouldn't connect. It took lots of tries and may reboots until it finally connected. Then I tried my Nexus. Like you, I got to the security screen and entered the code, but it wouldn't go any further. Once again, after many reboots of both the Nexus and the Belkin, I finally connected! Mirroring worked great. I didn't have time to test thoroughly to see if it would disconnect, but it worked flawlessly for 5-10 minutes.
Don't know why making the initial connection was so difficult. I need to do further tests. Not sure if it's just the Belkin that's the problem. Sorry for butting in on this Note3 thread, but just wanted to share my Belkin Screencast experience with you since you have a similar problem.
howardv said:
I bought a Belkin Screencast about a year ago when I got my Sony Laptop which had Widi. I could make a connection, but it would disconnect every few minutes. It was useless. I ended up buying a long HDMI cable to connect my laptop to my TV. I never knew if the problem was with the Belkin or my Sony.
Forward one year.....
I found my new Nexus 7 has Miracast. Earlier today, I took my Belkin Screencast out of the closet and tried to connect it to my Nexus without any success. I then connected it to my computer and updated it's firmware from 2.9 to 3.5. After the update, my laptop wouldn't connect. It took lots of tries and may reboots until it finally connected. Then I tried my Nexus. Like you, I got to the security screen and entered the code, but it wouldn't go any further. Once again, after many reboots of both the Nexus and the Belkin, I finally connected! Mirroring worked great. I didn't have time to test thoroughly to see if it would disconnect, but it worked flawlessly for 5-10 minutes.
Don't know why making the initial connection was so difficult. I need to do further tests. Not sure if it's just the Belkin that's the problem. Sorry for butting in on this Note3 thread, but just wanted to share my Belkin Screencast experience with you since you have a similar problem.
Click to expand...
Click to collapse
By all means, just happy to hear more info about the Screencast being used with Miracast. Thanks for the post.
psp1024 said:
By all means, just happy to hear more info about the Screencast being used with Miracast. Thanks for the post.
Click to expand...
Click to collapse
I've done some further testing. The Belkin Screencast is going back in the closet as it's very unstable and unusable. Making the initial connection every time takes several attempts and reboots. Once connected, it loses connection every few minutes. It's just not worth it. The firmware upgrade hasn't made it any better. It performed the same with my Nexus 7 (2013) using Miracast and my Sony laptop using Widi.
Over the weekend I went to Best Buy and purchased the Rocketfish Miracast and the Netgear PTV3000. The Rocketfish looks like a Chromecast dongle. Both the Rocketfish and the Netgear performed very well as they would connect at the first attempt and did not lose the signal. Personally, I think the Netgear performed a little better than the Rocketfish and is a few dollars cheaper.
However, both the Rocketfish and the Netgear would stutter for a second or two every few minutes while watching streaming video and listening to audio. I watched a movie on Netflix using the Netgear and just stopped after 30 minutes as the stuttering gets bothersome. Also, after 30 minutes, a lip-synch error had occurred and seemed like it got worse with time. These tests were done with my 2013 Nexus 7. To test further, I used my Sony laptop (widi) to make the connection. The connection was smooth and there was no more stuttering every few minutes. So the stuttering issues may be a Nexus problem and this may perform very well with your Note3.
In my opinion, both the Rocketfish and the Netgear are great for mirroring. It's perfect for showing pictures, presentations, browsing the web, etc. But not the best for streaming audio/video. Of course, nothing is as dependable and reliable as the good old cable (slimport, MHL, or micro HDMI - whichever your device uses), but that means you have to run a cable across the room.
For streaming Netflix, Youtube, Google Music, Pandora, and Hulu, Chromecast leads the way. No stuttering or lip-synch issues at all. It also allows multi-tasking - such as watching a Netflix movie and checking your e-mail on your tablet/phone without interrupting the movie. It also saves the battery life since you can put your phone/tablet in sleep mode and continue to watch the movie. Another plus is how the Chromecast dongle gets the movie directly from your router than your phone/tablet (hence why you can multi-task, save battery life, etc.). In my book, these are a huge plus for Chromecast, even making it better than a direct cable connection. But of course the big downside is that you need specific apps and mirroring is not an option.
It's sad that you really need two devices to become whole! I would keep both the Chromecast and the Netgear to have all bases covered.
howardv said:
I've done some further testing. The Belkin Screencast is going back in the closet as it's very unstable and unusable. Making the initial connection every time takes several attempts and reboots. Once connected, it loses connection every few minutes. It's just not worth it. The firmware upgrade hasn't made it any better. It performed the same with my Nexus 7 (2013) using Miracast and my Sony laptop using Widi.
Over the weekend I went to Best Buy and purchased the Rocketfish Miracast and the Netgear PTV3000. The Rocketfish looks like a Chromecast dongle. Both the Rocketfish and the Netgear performed very well as they would connect at the first attempt and did not lose the signal. Personally, I think the Netgear performed a little better than the Rocketfish and is a few dollars cheaper.
However, both the Rocketfish and the Netgear would stutter for a second or two every few minutes while watching streaming video and listening to audio. I watched a movie on Netflix using the Netgear and just stopped after 30 minutes as the stuttering gets bothersome. Also, after 30 minutes, a lip-synch error had occurred and seemed like it got worse with time. These tests were done with my 2013 Nexus 7. To test further, I used my Sony laptop (widi) to make the connection. The connection was smooth and there was no more stuttering every few minutes. So the stuttering issues may be a Nexus problem and this may perform very well with your Note3.
In my opinion, both the Rocketfish and the Netgear are great for mirroring. It's perfect for showing pictures, presentations, browsing the web, etc. But not the best for streaming audio/video. Of course, nothing is as dependable and reliable as the good old cable (slimport, MHL, or micro HDMI - whichever your device uses), but that means you have to run a cable across the room.
For streaming Netflix, Youtube, Google Music, Pandora, and Hulu, Chromecast leads the way. No stuttering or lip-synch issues at all. It also allows multi-tasking - such as watching a Netflix movie and checking your e-mail on your tablet/phone without interrupting the movie. It also saves the battery life since you can put your phone/tablet in sleep mode and continue to watch the movie. Another plus is how the Chromecast dongle gets the movie directly from your router than your phone/tablet (hence why you can multi-task, save battery life, etc.). In my book, these are a huge plus for Chromecast, even making it better than a direct cable connection. But of course the big downside is that you need specific apps and mirroring is not an option.
It's sad that you really need two devices to become whole! I would keep both the Chromecast and the Netgear to have all bases covered.
Click to expand...
Click to collapse
I wasn't aware Chromecast supported Netflix... interesting, I just may have to get that $35 dongle then.
My Belkin Screencast has worked flawlessly with my two Lenovo's, x230t and w530. I can watch full screen youtube/netflix on my computer while running a VM, movie or even some full screen games on my laptop's screen (Doesn't play well with DirectX full screen, or so it seems... I forget the specific name for that....)
psp1024 said:
My Belkin Screencast has worked flawlessly with my two Lenovo's, x230t and w530. I can watch full screen youtube/netflix on my computer while running a VM, movie or even some full screen games on my laptop's screen
Click to expand...
Click to collapse
It could be my Belkin is just a bad unit. But since it's been over a year since my purchase, I'm out of luck.
i have two dongles, Samsung allsharecast dongle and a dongle from Taiwan.
my old S4 i9500 on 4.2.2 connected on both and performance was very smooth on the Taiwanese dongle but there was lag on the Samsung dongle and sometimes audio and video are not in sync (if didn't use the default video player)
after updating to 4.3 performance degraded on both dongles and the phone automatically switches off the power saving mode (which didn't happen on 4.2.2)
i noticed that when you move further away from the dongle or cover the phone with your hand the playback gets choppy and sometimes disconnects (didn't happen on 4.2.2)
with note 3 n9005 i can't connect to the Taiwanese dongle (tried to connect daily for two weeks and only got it to connect 2 or 3 times) . only Samsung's dongle is working and it has the same issues of the s4 running 4.3
friend's s3 i9300 connected to both dongles but didn't have a chance to test performance
"device status has to be official, if you are rooted you can use wanam xposed to fake system status to official"
update:
note 3 connecting after update to 4.4.2, maybe my 4.3 had a bug
samsung allshare cast dongle is laggy
other miracast adaptors are fine
i ordered a measy A2W dongle and it is on the way
Hi all,
I have a Smart TV Panasonic DT60 series, but I'm no able to connect using my Note3.
Any one have successful connected the Panasonic SmartTV with the Note3 and miracast?
Thanks
Samsung All-Share Cast Hub
Just wanted to update everyone that I also tried the OFFICIAL miracast device by Samsung, the All-Share Cast Hub, and it didn't even work well. It did connect I'll give it that, but whenever I tried playing video (via youtube or video player app) it would play the audio but both screens would just be black, and there was an incredibly noticable delay in sound compared to the video stream. Netflix showed the video just fine, but it was out of sync by several seconds.
Needless to say, the hub was returned.

Network over usb or bluetooth with arm

Hi,
I began to work with android few days ago, (I worked before on iOS), and I would like to do something, but I have some constraints.
My devices
I have an ARM board, that includes bluetooth, wifi, network over usb, CPU and GPU like raspberry.
I already use wifi connected on distant wifi host server.
My ARM board is a linux embedded and has a web server running (apache2).
I have a Nexus 7 ( 2nd generation) and I can't root it. I mean, This project will be used with any tablet, plug and play like.
Connected to my Nexus with USB, the ARM device is powered, and works.
What I want to do...
I would like to connect my android tablet (Nexus 7 2nd generation) to my ARM board.
I could use USB or bluetooth. (cause wifi is already used).
I already tested tethering sharing network but I can't connect to my apache server. (I expected that)
I can't used reverse tethering cause I can't root my Nexus.
Have you any idea to connect my board, and chat with a browser ?
Thanks,
It's because I worked on the iOS that nobody answers ?? :laugh: :laugh:
I put my hand on the Jedi Code, I'm passed on the white side of the force now ... :angel:

What ROM or OS supports MHL to HDMI

I recently added service to my S4 At&t mdl version. It's running Goldeneye 53 from several months ago. It's 5.0.1 lollipop. I've read that since 4.3 people have been having issues getting video out working. I have a new Alpine x009u in my vehicle but it won't show video. I have a new Samsung mhl and an older one which I don't know from where. My Alpine will show Chromecast on the screen but I don't want to use this device as a hotspot for Chromecast. I thought I could get it to mirror but it still wants a WiFi connection. Any help would be great. I tried connecting my s4 to a standard TV hdmi but no luck either.

Installing additional wifi card OTG - Note 4 (WN725N, WF810S). HELP

Hello,
I have a SAMSUNG NOTE 4. For several months I'm trying to install drivers for additional wifi network adapter that connects to the microUSB port . Phone zrootowany etc. , but still can not cope with this wireless card : / First I bought TP - LINK TL - WN725N , then BPI - WF810S and nothing : / I thought that maybe she installs when you connect , but unfortunately it is not. I am writing to ask for help . I care very start on the network adapter and can not I'll be very grateful for your help ... I would ask you to explain exactly how to do this . Today I have Ditto Note 5 (for Note 4 ) , kernel version 3.10.9 .
Please contact,
Regards
Since I've never heard of this before, on any Android forum I've been to, I would assume it's not possible. I don't think you can install any drivers on any smart phone, mainly because it'd have to be written into the current version of the OS on your phone. I could be wrong, but I'm fairly sure whatever device you try to connect to your phone would have to be plug-and-play. That's why you can't use a blue tooth mouse on an iPad, for example, even though it supports blue tooth devices.

Android 10 Raspberry Pi: Reset loop when Ethernet removed and skype issue. Plz help.

Dear XDA developer forum members and Android enthusiastic,
Hope you all are all in good health and doing good.
I am basically a Electronic hardware guy with limited knowledge on Android.
With some efforts in last few weekends I could successfully install an Android 10 build into my raspberry Pi 4 single board computer.
This works all right when the Ethernet is always connected.
1. When Ethernet it disconnected it goes into a reset loop and even does not connect to wifi with correct password? Can anybody share how to move forward to solve this ? You can see this failure at the end of the below
youtube video : ZYfnSwyDHfQ
2. When I start skype it does not connect always, probably because skype for Android always looks for an wifi connection… so it fails to sign me in. Work around >> with skype lite I can log in.
Can anybody guide me how to force skype to sign in using the Ethernet in Android?
In some attempts when I was lucky to connect the wi-fi and sign in skype.. then it works all right even when I later connect my Ethernet.
Kind regards,
SC

Categories

Resources