Call going only through sim1 but shown as sim 2 - Zuk Z1 Q&A, Help & Troubleshooting

Hey guys, i've installed the darkness official redefined rom, it's all awesome, very nice, but the only problem i am facing is that, dual sim calls are happening, there's no option like "Ask everytime" for sims and also I've selected sim 2 for calls but they are going through sim 1 only but name as sim2 .i.e "Calling from sim2". Even the sms service too. I've switched my sim2 - 1 for calls sake ans during a reset i selected sim1 but still "calling from sim2 is shown" and i can never call from sim 2 i guess. Can somebody please help me out with it? And also the lockscreen, the pin unlocking is quite hangy, i mean the password entering is happening very slow..it's not smooth.

It's causing dual sim problem mainly because of baseband. Install ZUI 2.5 Beta ROM first & then clean flash your choice of ROM. ZUI replaces older baseband which is causing problems for Nougat ROMs.
Regards
Manga.
Sent from my ZUK Z1 using Tapatalk

Dual sim problem
mangareds said:
It's causing dual sim problem mainly because of baseband. Install ZUI 2.5 Beta ROM first & then clean flash your choice of ROM. ZUI replaces older baseband which is causing problems for Nougat ROMs.
Regards
Manga.
Sent from my ZUK Z1 using Tapatalk
Click to expand...
Click to collapse
Thank you very much for your help, and is it like first installing zui 2.5 and then flashing our required rom without any wiping?

VJ Guttula said:
Thank you very much for your help, and is it like first installing zui 2.5 and then flashing our required rom without any wiping?
Click to expand...
Click to collapse
You can wipe, because baseband doesn't change even if you wipe the data.
Sent from my ZUK Z1 using Tapatalk

Related

[SOLVED] Anyone has the stock rom for Huawei P8 lite? Enable dual sim P8lite.

Hello, i need the stock rom for Huawei P8 lite because in my country the carrier sells the phone with the second sim disabled from rom software.
I just need the stock rom to replace it.
Thx in advance.
//Edit:
How to enable dual sim:
1. Download ROM: https://mega.co.nz/#!rcFDzZSa!V1zxHlmSqIvhF1_FjIOsyu762s8ZURmYDRtxcQeDyI0
2. Read the instructions in the archive which you have downloaded. Pay attention!!! You must flash the second file also - that enables dual sim.
3 If u followed the instructions corectly u should have dual sim.
Many thanks to @kjartandi !!!
Official downloads if anyone needs it: consumer.huawei.com/at/mobile-phones/support/downloads/p8lite-at.htm
Here are the official downloads
official downloads: consumer.huawei.com/at/mobile-phones/support/downloads/p8lite-at.htm
@kjartandi does this rom is for dual sim version of the phone? because i need the stock rom which has the dual sim integration. my phone comes from the carrier with single sim rom software
Is your p8lite dual sim? Did you test it with nano and micro sim?
Thx in advance.
kjartandi said:
Hi! Yes, when you flash the files in the Step2 folder, it should enable the dual sim!
Click to expand...
Click to collapse
@kjartandi many many thx :laugh::laugh::laugh:
I CONFIRM THE ROM ENABLES DUAL SIM for P8LITE (ALE-L21) which come from the carriers with second sim disabled like ORANGE RO
permanent link of the files of kjartahandi: https://mega.co.nz/#!rcFDzZSa!V1zxHlmSqIvhF1_FjIOsyu762s8ZURmYDRtxcQeDyI0
Cris4524 said:
All single sim models can enable the second SIM slot by firmware update?
Click to expand...
Click to collapse
theoretically yes beacause all p8lite are dual sim by manufacturer
hello. i followed the same steps and the results are following:
-P8Lite Orange RO, single sim so called variant
-Flashed the ROM via tutorial, Step1 and then Step2.
- ROM has now dual card(sim) management enabled. Upon start it requieres 2 PIN's, each for every sim.
Only SIM1 has signal, sim2 has absolute no signal. When sim1 is disabled from dualcard management only then sim2 has signal. did a reset, started from scratch, same story.
is there any way to resolve this. to make it completely Dual Sim Full Active, as it should be from Huawei. The Huawei P8lite codename is ALE-L21. No other variant.
from huawei site i could not download any ROM.
Thanks for the mirrors to Robertuzu and Kajartandi
OP, I'm glad you got it fixed. Continuing this thread in XDA Assist is not the appropriate place. However you've found a solution for your device that can help others so I'm going to ask a moderator to move this thread here, http://forum.xda-developers.com/android/help. Also see this, http://forum.xda-developers.com/showthread.php?t=2073370. Perhaps you could write a guide that would help others with your device.
Consider editing your post title to add [SOLVED] That'll help others find your post.
raoulserban said:
hello. i followed the same steps and the results are following:
-P8Lite Orange RO, single sim so called variant
-Flashed the ROM via tutorial, Step1 and then Step2.
- ROM has now dual card(sim) management enabled. Upon start it requieres 2 PIN's, each for every sim.
Only SIM1 has signal, sim2 has absolute no signal. When sim1 is disabled from dualcard management only then sim2 has signal. did a reset, started from scratch, same story.
is there any way to resolve this. to make it completely Dual Sim Full Active, as it should be from Huawei. The Huawei P8lite codename is ALE-L21. No other variant.
from huawei site i could not download any ROM.
Thanks for the mirrors to Robertuzu and Kajartandi
Click to expand...
Click to collapse
I've seen the same problem reported here:
htcmania.com/showthread.php?t=1016301&page=7
The user fixed the problem flashing the spanish firmware.
I've downloaded both firmwares (MEGA and Espana). The only difference is in the "step2" folder (it doesn't exists in Spanish firmware). Step1 folder IS THE SAME.
So, in my opinion you shuld try to flash only the "Step1" folder and check if all is ok.
Let us know if this fixes your problem
[/COLOR]
raoulserban said:
hello. i followed the same steps and the results are following:
-P8Lite Orange RO, single sim so called variant
-Flashed the ROM via tutorial, Step1 and then Step2.
- ROM has now dual card(sim) management enabled. Upon start it requieres 2 PIN's, each for every sim.
Only SIM1 has signal, sim2 has absolute no signal. When sim1 is disabled from dualcard management only then sim2 has signal. did a reset, started from scratch, same story.
is there any way to resolve this. to make it completely Dual Sim Full Active, as it should be from Huawei. The Huawei P8lite codename is ALE-L21. No other variant.
from huawei site i could not download any ROM.
Thanks for the mirrors to Robertuzu and Kajartandi
Click to expand...
Click to collapse
Afew days ago I bought one from Vodafone in Greece which was branded and thus it supported only one sim card. I just flashed the official B046 firmware and the phone now is dual sim. Of course it is nοt Dual Sim Active as very few and expensive phones are. It's a regular Dual Sim Standby phone which disactivates reception on one while on a call on the other. Don't flash the "Spanish" firmware. I did, a week ago, and I ended up with a phone that thought that it had firmware B311 and that it was a different model. I couldn't even do a hard reset! I then downloaded the Mega firmware, flashed Step 2 first, then Step 1, then Step 2 again and then I did a hard reset. Now the phone works brilliantly.
i have flashed the spanish firmware. same story. only one sim at a time has signal. at one point both did not have signal, kinda paniked. the spanish firmare allowed me a reset and the data about phone and firmware was same B046.
I am trying now to do step2, then step1, then step2 again than a reset. hopefully it will bring something
They probably rectified the problem and they are now offering the correct firmware for downloading.
no succes.
so... i have no other idea.
i have used the Mega download with 2 steps. i have used the spanish firmware. all of them have the same build number.
everything goes smooth while "upgrading" via sdcard.
i do not know what to try. it is interesting that i have signal on sim2 only after i disable sim1. when sim2 has 4g data enabled then both sims do not have any signal
i have downloaded all available firmwares. i even downgraded to b041 from b046b. SIM1 has signal, sim2 has no signal. when one is deactivated , the other one has signal.
i did a hard reset every time after the flash. No success! can anybody with more knowledge on this investigate and help.
raoulserban said:
i have downloaded all available firmwares. i even downgraded to b041 from b046b. SIM1 has signal, sim2 has no signal. when one is deactivated , the other one has signal.
i did a hard reset every time after the flash. No success! can anybody with more knowledge on this investigate and help.
Click to expand...
Click to collapse
Your sims supports 2G? Because when you enable all the 2 SIMS, the second one goes in 2G.
For example, in my case (H3G Italy), I can't use my SIM in 2G, so if I enable the 2-SIM mode, the second sim has no signal.
I must use (as second SIM) another operator which supports 2G mode.
i used the same sims in another p8lite(dual sim from the store). it is not the sims
Dear Admin, please mark issue as Unsolved.
i have tried 5different sims. just to be sure. same issue.
i have flashed again the Firmware from Mega file. step 1(b046b) and step 2. no resolution.
i have downloaded from huawei 3 firmwares. one called open market(b046b), one marketspecific(b046b), one from malaesia(b311). flashed them all, same issue.
Phone works great, yet it is a shame i can not use it as Huawei designed it(aka dual sim full active, signal on both sims simultaneosly)
there are P8Lites , like mine, with vendor specific firmware, where the second sim is disabled. there are users who managed to free the sim2 slot without any issue yet there are users who could not do that. what exactly did the vendors do is unknow for now and we need a dev for a custom rom.
please take a look!
ps: there are users who say that the latest OTA update(b052) brings signal to sim2, but it is not confirmed by many
http://consumer.huawei.com/es/support/products/index.htm?pro=ALE-L21 the open market firmware
raoulserban said:
..
Phone works great, yet it is a shame i can not use it as Huawei designed it(aka dual sim full active, signal on both sims simultaneosly)
...
Click to expand...
Click to collapse
Only a clarification: P8 Lite IS NOT DUAL SIM FULL ACTIVE, it is Dual Sim Dual Standby: the 2 Sims works concurrently, but when you receive a call on one sim, the other goes offline.
Hello
there is the link for 052 update
chrome://mega/content/secure.html#!ohZVBDrS!8LPT5Hta-v02lKtLcdgtVy6QAxOsUTj5t21aOhrzfLI
Put update.zip into dload paste, do the normal update, and finaly the 2 sims work like a charme
teste and fully works
regards
---------- Post added at 07:21 PM ---------- Previous post was at 07:18 PM ----------
work link sorry
https://mega.co.nz/#!ohZVBDrS!8LPT5Hta-v02lKtLcdgtVy6QAxOsUTj5t21aOhrzfLI
Yes. this update truly frees te second sim. I have followed the spanish forum and flashed it then, just took me a while to confirm here too
NO WIFi
i followed the instruction with the latest update file and now both sims are active and working fine.
The problem is no wifi at all. and is not possible to turn it on even.
any ideas?
im from pakistan i dont have any issue but im using the second slot for memory card stock firmware is working perfect loving the phone in its price range .

Dialer problem!

Hey guys! I got my note 4 today. It is used.
It came at 4.4.4 android version and rooted. So i installed TWRP and flashed BLISS Rom.
But right after i dial any number, i got "call ended", i cant receive calls and sms too.
I already tried another SIM card, but the problem persist.
I also updated the bootloader and the modem to the 6.0.1 version from the ditto note 5 rom topic.
What else can I do to make it work ?
Did i got and defective phone ?
Is the SIM card you are using only works under 4G area? Or does it support 2G/GSM as well?
Try reinstalling the stock firmware and see if that helps. But don't root it this time.
Yes, it supports 4g. And i already tried the stock rom, but with no results... What can i do ? D:
APN settings correct for your carrier?

CM14 Moto X Style (XT1572-Clark) ASIA Dual Sim: Problem with SIM detection

Hi guys, I'm facing a problem with CM14 SIM detection with this version of hardware.
If any developer can help, I'm happy to test any fix you can provide.
So, 'till now:
- Flash CW 14 from here: http://www.cyanogenmods.org/forums/topic/update-moto-x-pure-cm14-cyanogenmod-14-nougat-7-0-rom/
- I'm follow the steps of page and download the last build from here: https://androidfilehost.com/?w=profile&uid=95897840722645866 (cm-14.1-20161127-UNOFFICIAL-clark.zip)
- Clean install with TWRP;
- Factory reset; -> No sim detected
- Flash marshmellow modem from here: http://forum.xda-developers.com/mot...odem-flashable-modem-files-eu-single-t3297051 -> No sim detected
so that it is... just say a word and I'll try my best.
Thanks all,
N.
I can almost guarantee you will get no help without providing a logcat.
itslels said:
I can almost guarantee you will get no help without providing a logcat.
Click to expand...
Click to collapse
Go back to stock..
I had also faced this issues..
I flashed cm14.1 but no sim then i flashed the latest stock
By. http://www.filefactory.com/folder/dd05c058d3ff8dbe/?sort=filename&order=DESC&show=100
And then i flashed twrp again and then tried cm14.1 then boom.. it worked.... But its currently wip so im using du right now.....
itslels said:
I can almost guarantee you will get no help without providing a logcat.
Click to expand...
Click to collapse
can you provide some instructions on how to get the logcat?
Sagar_1401 said:
Go back to stock..
I had also faced this issues..
I flashed cm14.1 but no sim then i flashed the latest stock
By. http://www.filefactory.com/folder/dd05c058d3ff8dbe/?sort=filename&order=DESC&show=100
And then i flashed twrp again and then tried cm14.1 then boom.. it worked.... But its currently wip so im using du right now.....
Click to expand...
Click to collapse
what is your hardware variant? it is a dual sim phone?
and can you point me the exact stock rom you used?
noalter said:
what is your hardware variant? it is a dual sim phone?
and can you point me the exact stock rom you used?
Click to expand...
Click to collapse
Moto x style xt1572 dual sim retasia....
http://www.filefactory.com/file/66l...S24.107-58-1_cid7_subsidy-DEFAULT_CFC.xml.zip
This is that one which u need
Dual sim issues
Hy,
I have xt1575 and the phone has the dual sim tray and on the motherboard exist a dual sim circuit. I can activate only the first sim, the second one is inactive.
Can I flash the stock firmware from xt1572?
Thank you

Calling bug (fixed)

Hi everyone,
I'm facing a very strange bug in every ROM even i flashed back MIUI stable but still it was their,
I'm not able to make calls from my jio no. to any other jio no. while as i can easily make calls from my jio no. to any non jio no.
The call gets disconnected automatically as if i don't have VoLte device.
Tried using other sim card but not solved. Done a full reset twice but still no luck.
Please anybody know how can i fix it ?
(Already fixed)
Try contacting jio care maybe they can help.
starlord143 said:
Try contacting jio care maybe they can help.
Click to expand...
Click to collapse
Lol thats not jio's problem do a fastboot flash and ur volte will be working I got the same problem no volte in any ROM flashed fastboot miui and the flashed twrp and other custom rom that's it volte working

VoLTE with JIO not working on PIE os.

Hi i tried NitrogenOS and PixeN-OS.
Both claim to have VoLTE working but i couldn't get it to work.
JIO being a VoLTE only network (no GSM) i cannot receive or make calls.
Is there special setting or fix available?
Has any one actually had the VoLTE tested with any network?
Anyone?
working fine here
umair shaikh said:
working fine here
Click to expand...
Click to collapse
Are you using same rom?
Which kernel are you using?
Can you please share settings if u have changed any.
Which sim slot is the JIO in?
firoz3321 said:
Are you using same rom?
Which kernel are you using?
Can you please share settings if u have changed any.
Which sim slot is the JIO in?
Click to expand...
Click to collapse
pixen-OS with the open beta 17
umair shaikh said:
pixen-OS with the open beta 17
Click to expand...
Click to collapse
1.are you able to make calls?
2. Can you share screenshot of the Sim card settings, preferred network selection
3. Can u share the screenshot of jio APN
4. Which sim slot 1 or 2 are you using?
5. Which kernel?
I tried 3 Roms of pie but i couldn't make or receive calls..
firoz3321 said:
1.are you able to make calls?
2. Can you share screenshot of the Sim card settings, preferred network selection
3. Can u share the screenshot of jio APN
4. Which sim slot 1 or 2 are you using?
5. Which kernel?
I tried 3 Roms of pie but i couldn't make or receive calls..
Click to expand...
Click to collapse
using jio in sim slot 1 and didn't flash any other kernel...
just using the one that came with pixen-OS
try flashing open beta 17 first and then flashing pie rom
I don't have the option Enhanced LTE
Will try ur suggestion. Thank you
umair shaikh said:
using jio in sim slot 1 and didn't flash any other kernel...
just using the one that came with pixen-OS
try flashing open beta 17 first and then flashing pie rom
Click to expand...
Click to collapse
Thank you,
VoLTE seem to be working only in slot 1 unlike the OOS.
Following ur suggestions installed ob17 first and changed jio to slot 1.
Now VoLTE calls are working.thanks a lot.
firoz3321 said:
Thank you,
VoLTE seem to be working only in slot 1 unlike the OOS.
Following ur suggestions installed ob17 first and changed jio to slot 1.
Now VoLTE calls are working.thanks a lot.
Click to expand...
Click to collapse
??
OB17
Hi..
New to this forum. Recently flashed my OnePlus 2 with pie OS and VOLTE not working on Jio. I've read through the thread. Where I can find the open beta 17?

Categories

Resources