Hello, I've been trying to root my G928T on version 5.1.1 for the first time to no success. I even followed the steps but if someone could point me out on what I did wrong, then I would appreciate it. This is what I did
1. Download Odin 3.12.3, arter97 kernel g928t v22.0, the provided arter97 twrp recovery v22, supersu v2.79
2. Connect device to pc, launched odin and picked twrp recovery tar file
3. disconnect device, went into developers setting and enable oem and usb debugging
4. connect device in download mode, unchecked autoboot in odin, and clicked start
5. pass box, everything seems to be going well
6. now this is the part where i think it's supposed to be installing the recovery but nothing happens to my phone after i click start, it just stays on the download mode screen
7. i restart and enter recovery mode on the phone but it does not launch twrp, enters the default recovery screen
I would also appreciate if someone could just send me a guide on how to root for this model on version 5.1.1 thanks
Related
I just lately one day decided to update TWRP recovery. I downloaded img file and flashed it at the old TWRP. I rebooted the phone but just blue recovery boot text flashed quickly and it went to the Odin mode and there is red text: could not do normal boot. :crying:
So if I try normal boot it does that above. If I press recovery It does the same. I can still access Odin mode.
Is my device soft bricked or hard bricked? How can I get it work/unbrick it?
Lots of questions... I am pretty noob with these root/moding things, I hope someone could help me.
kaalilaatikko said:
I just lately one day decided to update TWRP recovery. I downloaded img file and flashed it at the old TWRP. I rebooted the phone but just blue recovery boot text flashed quickly and it went to the Odin mode and there is red text: could not do normal boot. :crying:
So if I try normal boot it does that above. If I press recovery It does the same. I can still access Odin mode.
Is my device soft bricked or hard bricked? How can I get it work/unbrick it?
Lots of questions... I am pretty noob with these root/moding things, I hope someone could help me.
Click to expand...
Click to collapse
You only have to follow the steps posted in TWRP page:
1. TWRP Install (Requires TWRP 2.8.4 or higher already installed):
Download the latest TWRP image file (.img) from the download link and boot TWRP. Go to install and find and select the Images... button. Browse to the image that you downloaded and select it. Choose recovery and swipe to flash.
2. Odin Install Method (No Root Required):
You will need to download and install Odin on your PC. Once you have Odin installed, download the proper .tar file for your device from the download link above. Power off your device. Turn on your device using the proper key combo to get into "download mode" and attach the device to your computer via a USB cable. Use the PDA/AP tab or button to browse to and select the tar file that you downloaded and flash the device.
SOLUTION: Reflash TWRP via 2nd step.
Joku1981 said:
You only have to follow the steps posted in TWRP page:
1. TWRP Install (Requires TWRP 2.8.4 or higher already installed):
Download the latest TWRP image file (.img) from the download link and boot TWRP. Go to install and find and select the Images... button. Browse to the image that you downloaded and select it. Choose recovery and swipe to flash.
2. Odin Install Method (No Root Required):
You will need to download and install Odin on your PC. Once you have Odin installed, download the proper .tar file for your device from the download link above. Power off your device. Turn on your device using the proper key combo to get into "download mode" and attach the device to your computer via a USB cable. Use the PDA/AP tab or button to browse to and select the tar file that you downloaded and flash the device.
SOLUTION: Reflash TWRP via 2nd step.
Click to expand...
Click to collapse
Thanks a lot guy! It works now. I thought it would be something like that but I wasn't sure. I am very thankful because I am still teenager and note 3 means very much to me. :victory:
i tried everything, but i can't install twrp. i tried to install via odin 3.12.3 but nothing. how can i resolve this issue? i tried also with a pre-rooted firmware.
hello,
fedetrevi1 said:
i tried everything, but i can't install twrp. i tried to install via odin 3.12.3 but nothing. how can i resolve this issue? i tried also with a pre-rooted firmware.
Click to expand...
Click to collapse
dude write some more info will you, i dunno whether
your device is locked
you have developer drivers on your laptop
what TWRP version you are trying to install
but anyways if the whole process is completed without any results consider starting odin as an administrator then flash TWRP
Hello sir
Follow my steps for successful TWRP/ROOT
1.)Download and install Samsung USB Drivers
2.)Download TWRP 3.0.2.0
3.)Download Odin
4.)Download SuperSU.zip file
For download links message me or add me on facebook facebook. com/fRoD.cs
After you complete this 4 steps shutdown your phone and enter into Download Mode
Volume Down + Power + Home
Select continue by Volume Up key
Now connect phone with usb cable into pc and run Odin as administrator
Click on AP box and select the twrp.tar file you download before
Go to Options tab and uncheck Auto Reboot, make sure that only F, Reset Time is checked and click start
After successfully installed TWRP , remove the battery, put it back and make sure that you go into recovery mode immediately!!! Volume Up + Power + Home
If you boot up the phone it will restore the original recovery. Thats why you need to go to recovery mode first.
First time you boot in recovery it will be shown a TWRP screen asking to allow modifications to system partition. Swipe to accept that.
Now select Install option and select SuperSU.zip file. By default it should be in Download folder, and swipe to start install
After installing click reboot and your SM-G361F will be rooted. You should have SuperSU app in the menu
Working Recovery
stevo4 said:
Hello sir
Follow my steps for successful TWRP/ROOT
1.)Download and install Samsung USB Drivers
2.)Download TWRP 3.0.2.0
3.)Download Odin
4.)Download SuperSU.zip file
For download links message me or add me on facebook facebook. com/fRoD.cs
After you complete this 4 steps shutdown your phone and enter into Download Mode
Volume Down + Power + Home
Select continue by Volume Up key
Now connect phone with usb cable into pc and run Odin as administrator
Click on AP box and select the twrp.tar file you download before
Go to Options tab and uncheck Auto Reboot, make sure that only F, Reset Time is checked and click start
After successfully installed TWRP , remove the battery, put it back and make sure that you go into recovery mode immediately!!! Volume Up + Power + Home
If you boot up the phone it will restore the original recovery. Thats why you need to go to recovery mode first.
First time you boot in recovery it will be shown a TWRP screen asking to allow modifications to system partition. Swipe to accept that.
Now select Install option and select SuperSU.zip file. By default it should be in Download folder, and swipe to start install
After installing click reboot and your SM-G361F will be rooted. You should have SuperSU app in the menu
Click to expand...
Click to collapse
https://forum.xda-developers.com/ga...sm-g361f-unofficial-twrp-2-8-7-3-0-2-t3425402
hi
I have a problem with my g361f. After few sec proces of flashing twrp failed.. Can you help ?
thocenski said:
hi
I have a problem with my g361f. After few sec proces of flashing twrp failed.. Can you help ?
Click to expand...
Click to collapse
Ah, opportunely, I have the exact same device.
Now, I have actually installed TWRP before so I can help.
Usually, if it stops the flashing process, it may be a case of the Custom binary being blocked by the FRP lock on the device. Have you OEM unlocked it?
On the device, when you boot it into download mode, does it say FRP LOCK: ON on the screen?
If not, skip this step.
If so, you need to do the following:
1) Reboot the device normally
2) Go into Settings, Developer Options (note: to enable it, go to About Device and spam the Build Number box until it says that you are a developer)
3) Find where it says 'OEM Unlock'
4) Confirm the change
Now, there is an extra step which I had to take if you have a Google account signed in on your device. You might not need to, but it's best just in case:
1) Go to Settings, Accounts and Google
2) Click the Google account on the device
3) Click 'Remove Account' and confirm
Note: You will need to sign in to use any of the GApps, but you cannot access the recovery whilst being signed in because of the FRP lock.
4) Reboot your device into download mode and try again.
This may not be the case, though.
Also, don't bother with adding that guy on Facebook. I have all the downloadable things you need here, but I advise you do follow his guide, except the Download folder section. He missed out that you need to download the SuperSU binary to your device. Downloads are here:
Here are the Samsung USB Drivers for Mobile Phones (NOTE: You may not need these at all since you can actually begin the flashing process without them, so don't bother):
http://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
Here is the TWRP recovery (NOTE: Please download the 3.0.2.0 version, since it is more up-to-date and more likely to succeed:
https://forum.xda-developers.com/ga...sm-g361f-unofficial-twrp-2-8-7-3-0-2-t3425402
And here is ODIN (You already have it, but here it is anyway. Also, download the first one, not the second one, since the first one is newer):
https://odindownload.com/download/
Also, the SuperSU binary (Note: It's easier to open it in your Android browser and download the file from there. That avoids the need to transfer the file from the PC to the phone):
http://www.supersu.com/download
Now, it could, in fact, be a problem with the USB cable. It's highly unlikely, but mine is a bit tempermental, insisting that if I nudge it, it'll stop working.
Notify me how it goes, because this worked first time for me.
fedetrevi1 said:
i tried everything, but i can't install twrp. i tried to install via odin 3.12.3 but nothing. how can i resolve this issue? i tried also with a pre-rooted firmware.
Click to expand...
Click to collapse
Go to developer settings and check OEM Unlocking (if its already checked recheck it) and then reboot. Then close the phone and install TWRP.
Hi I've managed to install the correct twrp on my device but when I go into recovery I get the same message not seandroid enforcing. I've followed all the steps but I can't get it into recovery on twrp. Does anyone have a solution please?
So I followed the usual procedure to install twrp via Odin (all the required files on my computer, as well as both usb debugging and oem unlock enabled on my phone)
To my surprise, after getting the "Passed" message on Odin my phone Bootlooped for a bit, but worked perfectly after I restarted it from the stock recovery menu. But I´m still without twrp and no root access.
Was it because of an incorrect tar file or what?
By the way, I used "twrp-3.1.0-0-hero2lte.img.tar" on a g935F
I need some help.
Before flashing with Odin untick reboot option from there. Flash TWRP (but before that be sure u have 2 files on ur phone ,flashaable super su and no verity opt encrypt) flash TWRP,power off ,the start the phone with vol up and power to enter TWRP , format data flash no verity then SuperSU. Hope it helps
Hey everyone, I just wanted to make this thread about rooting the J7 on Boost after upgrading to Nougat. I did not want to try the old root method because of the new firmware for the simple reason of I was afraid to be bricked. Therefore i tried this and it worked
*Disclaimer* I am not responsible for any damages to your device. Do at your own risk. I am also not a developer in any kind of way and will most likely not be able to answer any questions to problems you face. This method simply worked for me after losing my root when i upgraded to 7.1.1 Nougat.
Requirements:
1) Odin (I used 3.10) https://odindownload.com/SamsungOdin/#.Wlpm26hKvIU
2) TWRP https://forum.xda-developers.com/galaxy-j7/development/recovery-twrp-3-0-3-0-galaxy-j7-t3560327
3) Supersu Zip http://www.supersu.com/download
4) An Unlocked Bootloader
Instructions:
1) Unlock your bootloader to enable developer options and turn on usb debugging tapping on about device 7 times and make sure OEM unlock is switched on when rooted (Never turn this off and reboot your device. You'll be soft bricked)
2) Put the Supersu zip file in your phone's storage
3) Boot your phone into download mode
4) Open up Odin and connect your phone
5) Uncheck Auto Reboot!!! if not, your phone will boot up automatically and you will lose TWRP after flashing
6) Flash TWRP where it says "AP"
7) After TWRP finish installing, pull the battery and put it back in and boot into recovery (Power + Home Button + Volume UP)
8) After booting into TWRP, press install and find the Supersu zip file
9) Flash it and then reboot (phone may boot loop a couple of times)
10) Download root checker from the play store to verify you have root
11) Enjoy
Thanks go out to minz1 for TWRP and the people of supersu
I have the J7 Perx (Boost) Software Version- J727PVPU3ARC2 (Nougat 7.0).
I have the j7 perx software v- J727PVPU3ARC2, I need to upgrade to Android Nougat 7.1.1 or higher again. Can you help with this? Please let me know.
Hello
I own a samsung galaxy C9 Pro SM-C9000 Android 7.1.1 Nougat
I only want to root the official ROM
I had to try everything possible
It does not work, impossible to install TWRP to boot for the rooted
the installation with Oden his pass very well but it does not boot on TWRP and the boot and completely corrupted
the phone is on it turns on but it does not go on the bootloader
the download mode works perfectly
Tested by my phone with the official ROM SM-C9000_C9000ZHU1BQL3 Android 7.1.1 Nougat
And i'm have same proplem.. I still cannot root it or flash twrp.. Can any one help us
please, it nobody has rooted the C9000 HK ?
I managed to install TWRP on my C9000 HK but it is that of the C900F version
TWRP-3.1.1-0-C900F
how to root please ?
I have successfully rooted the SM-C9000 with SuperSU and TWRP
it fake install TWRP-3.1.1-0-C900F
and formatted the DATA otherwise it will not work
after installing the SuperSU via TWRP
are you serious? Has your root and twrp worked? Tell me how and if possible give me the link
How To Root Galaxy C9 Pro SM-C9000 On Nougat 7.1.1 ? hong kong version
Special Notes:
1. DON'T FORGET TO ENABLE "OEM UNLOCK" (located in Developers options).
2. KNOX will be tripped once you flashed custom binaries to your phone.
(Your warranty may be voided. However this may not affect you if your country forces Samsung to provide hardware warranty regardless of software status.)
3. Samsung Firmware OTA (aka System Updates) will no longer work once you flashed custom binaries.
(You can flash custom ROMs if you want to keep the OS up-to-date.)
WHAT IS TWRP?
Team Win Recovery Project is a custom recovery for Android devices.
It allows you to back up and restore your data, flash custom ROMs to your device, repair broken file systems, and root your device.
How to intall TWRP using ODIN
1) Go to Settings » About phone » and tap “Build number” seven times to enable “Developer options”.
2) Go back to the main Settings page, scroll to bottom and select“Developer options” from there.
3) Under Developer options, look for “Enable OEM unlock”checkbox/toggle and make sure you Check it or turn it ON.
4) Now Boot your Samsung Android device into Download mode.To Do So Follow the steps below
5) Switch off your device.
6) Press and hold “Home + Power + Volume down” buttons for a few seconds until you see a warning screen.
Press Volume Up on the warning screen to accept it and boot into Download mode.
Once your device is in download mode, connect it to the PC with a USB cable. The Odin will automatically detect the device and show an “Added!!” message. If not then your device is not connected properly
7) Now click on the AP tab on Odin window and select the TWRP recovery .tar file that you downloaded for your device.
8) Click the Start button on Odin to start Flashing and wait for it to finish the process.
Once it finished successfully, a pass message on the Odin screen will pop up
Your device will automatically reboot when Odin is done flashing. Now You can disconnect your device.
Done!!! TWRP is now installed on your device
ROOT OPTIONS:
File needed
dzkouba said:
Special Notes:
1. DON'T FORGET TO ENABLE "OEM UNLOCK" (located in Developers options).
2. KNOX will be tripped once you flashed custom binaries to your phone.
(Your warranty may be voided. However this may not affect you if your country forces Samsung to provide hardware warranty regardless of software status.)
3. Samsung Firmware OTA (aka System Updates) will no longer work once you flashed custom binaries.
(You can flash custom ROMs if you want to keep the OS up-to-date.)
WHAT IS TWRP?
Team Win Recovery Project is a custom recovery for Android devices.
It allows you to back up and restore your data, flash custom ROMs to your device, repair broken file systems, and root your device.
How to intall TWRP using ODIN
1) Go to Settings » About phone » and tap “Build number” seven times to enable “Developer options”.
2) Go back to the main Settings page, scroll to bottom and select“Developer options” from there.
3) Under Developer options, look for “Enable OEM unlock”checkbox/toggle and make sure you Check it or turn it ON.
4) Now Boot your Samsung Android device into Download mode.To Do So Follow the steps below
5) Switch off your device.
6) Press and hold “Home + Power + Volume down” buttons for a few seconds until you see a warning screen.
Press Volume Up on the warning screen to accept it and boot into Download mode.
Once your device is in download mode, connect it to the PC with a USB cable. The Odin will automatically detect the device and show an “Added!!” message. If not then your device is not connected properly
7) Now click on the AP tab on Odin window and select the TWRP recovery .tar file that you downloaded for your device.
8) Click the Start button on Odin to start Flashing and wait for it to finish the process.
Once it finished successfully, a pass message on the Odin screen will pop up
Your device will automatically reboot when Odin is done flashing. Now You can disconnect your device.
Done!!! TWRP is now installed on your device
ROOT OPTIONS:
File needed
Click to expand...
Click to collapse
Hello :3 i performed the same steps but it just keeps corrupting my stock/current rom after i flash twrp. Some people face this same problem... What they can do is they can flash back the original samsung rom without the stock recovery, so then the twrp one will be there.
Bilal54 said:
Hello :3 i performed the same steps but it just keeps corrupting my stock/current rom after i flash twrp. Some people face this same problem... What they can do is they can flash back the original samsung rom without the stock recovery, so then the twrp one will be there.
Click to expand...
Click to collapse
you need to uncheck reboot option from odin, After Pass success message on odin remove cable from your phone then press volume down + home + power off when black screen appears immediately manually boot it to twrp by pressing volume up + Home + Power on and you boot to twrp.
KAASHP said:
you need to uncheck reboot option from odin, After Pass success message on odin remove cable from your phone then press volume down + home + power off when black screen appears immediately manually boot it to twrp by pressing volume up + Home + Power on and you boot to twrp.
Click to expand...
Click to collapse
Oh is that so, ill try this method hope it works. Thanks alot ?
dzkouba said:
I managed to install TWRP on my C9000 HK but it is that of the C900F version
TWRP-3.1.1-0-C900F
how to root please ?
Click to expand...
Click to collapse
Big thanks to dzkouba!!! W/o your report I'd have probably given up because at the time of trying out your solution I've already spent 20+ hours trying to install TWRP on my SM-C9000 (Hong Kong).
For what it's worth, here are the things you will need to do in order to install TWRP on your SM-C9000:
Unlock the bootloader
Enable "OEM Unlock", which can only be done in version 7 (Nougat) or earlier Miracle Box didn't work for me.
Flash a TWRP version that's tailored for SM-C900F (as dzkouba suggested)