Hi..! Does anybody know how to install V4A on RR N? I flashed ViPER4Android_2.5.0.5_guitardedhero.zip via TWRP but that didn't make the trick... Any advice or solution?
What kind of ROM are you running? TouchWiz s7 or note 7 or AOSP?
Edit: if it's nougat it's probably AOSP, is it lineage or something different?
Do you have the viper app on your phone?
I tried with resurrection Remix but now I'm onCosmicOS. An AOSP based. And yes I have installed V4A and BusyBox as well. On Resurrection REmix I got an I/O error. Now on CosmicOS the driver always fail to install.
Related
What is better ? Ressurection Remix MM or Cyanogenmod 13 by dgadelha ?
I recommend CM13.1 by dgadelha....smoother than RR...
crashbet4 said:
What is better ? Ressurection Remix MM or Cyanogenmod 13 by dgadelha ?
Click to expand...
Click to collapse
You have to try them.
RR gives more customization and newer updates.
CM gives more stability and better performance imo.
RR has almost all features which CM13 have, plus many more features. I was using Xposed and modules for features like Network speed meter and Multi windows in CM13 but as I switched to RR, I don't need experimental Xposed modules which fail many times because RR have them pre-installed. Also, as dgadelha has stopped development, there won't be any updates or bug fixes but on the other hand, tank0412 is working everyday and pushing updates to fix bugs. I'd recommend RR.
I recommend RR MM
Sent from my ASUS_T00F using XDA-Developers mobile app
Hello, how are you. I am having trouble installing a custom ROM it goes into boot loop this does not happen when installing the rom stock, I have tested other roms and the problem is the same.
ROMS tested:
Viper-Os
Ressurrection Remix
Lineage OS
Does anyone know how to solve
My device
Galaxy J500M 2015
Android 5.1.1
TWRP 3.0.2
AlissonLimaSV said:
Hello, how are you. I am having trouble installing a custom ROM it goes into boot loop this does not happen when installing the rom stock, I have tested other roms and the problem is the same.
ROMS tested:
Viper-Os
Ressurrection Remix
Lineage OS
Does anyone know how to solve
My device
Galaxy J500M 2015
Android 5.1.1
TWRP 3.0.2
Click to expand...
Click to collapse
Do those roms support your device model?
Yes my device suport the rom
I have a OnePlus 5 rooted with pure Fusion OS 7.1.2... I've had Pure Fusion for a while and I love it.. I'm just wantng something new and I've read a lot up on Resurrection Remix and I'm going to try that for a while....I have TWRP 3.1.1 version 43 bluespark.. I want to flash Resurrection Remix Oreo 6.0 Gapps 8.1 pico and super su....what all do I need to do? Do I need to update TWRP? ANY HELP OR A GUIDE WILL BE VERY VERY MUCH APPRECIATED. Thanks.
TENlll423 said:
I have a OnePlus 5 rooted with pure Fusion OS 7.1.2... I've had Pure Fusion for a while and I love it.. I'm just wantng something new and I've read a lot up on Resurrection Remix and I'm going to try that for a while....I have TWRP 3.1.1 version 43 bluespark.. I want to flash Resurrection Remix Oreo 6.0 Gapps 8.1 pico and super su....what all do I need to do? Do I need to update TWRP? ANY HELP OR A GUIDE WILL BE VERY VERY MUCH APPRECIATED. Thanks.
Click to expand...
Click to collapse
This belongs in the Q&A section.
There is no active RR development for the OP5. The official build never got off the ground and is not fit for use. I recommend LOS 15.1 from codeworkx, or if you need more features, Dirty Unicorns Oreo, which you can get from their website. That will do you until Pie ROMs mature a bit.
Update your TWRP and Firmware to latest Official before flashing ROM. Opengapps Pico is good. ARM64.
Dirk said:
This belongs in the Q&A section.
There is no active RR development for the OP5. The official build never got off the ground and is not fit for use. I recommend LOS 15.1 from codeworkx, or if you need more features, Dirty Unicorns Oreo, which you can get from their website. That will do you until Pie ROMs mature a bit.
Update your TWRP and Firmware to latest Official before flashing ROM. Opengapps Pico is good. ARM64.
Click to expand...
Click to collapse
so I need to get rid of pure Fusion 7.1 2. custom ROM and go back to oxygen and update firmware that way before I go to Oreo?
TENlll423 said:
so I need to get rid of pure Fusion 7.1 2. custom ROM and go back to oxygen and update firmware that way before I go to Oreo?
Click to expand...
Click to collapse
I would.
Nandroid before you begin. Update TWRP to latest and flash full OOS zip. Run it once and then back to Recovery to do your wipes and custom ROM/Gapps flash.
Asked and answered here: https://forum.xda-developers.com/oneplus-5/help/qa-help-thread-newbies-post-t3624656/post77951470
Hi
I'm in resurrection remix 6.2 which is based on lineageos Oreo 8.1.
I'm using magisk, Xposed Framework and exposed edge which is important.
My question, if I want upgrade to pie, what is the safest way? Should I go with lineageos 17?
Edit: do I have install the stock pie from Xiaomi first, or is it enough to install a pie custom Rom. If latter, do I have then to update modem firmware or will this be done by the custom rim itself?
Any hints appreciated.
Which Custom ROM are you using currently? Comment below if you are using some other than the options.
Nitrogen OS Oreo
Apcoolboy said:
Nitrogen OS Oreo
Click to expand...
Click to collapse
Cool. Oreo Fan. Any reasons?
Vishal P said:
Cool. Oreo Fan. Any reasons?
Click to expand...
Click to collapse
Didn't find any good daily driver Pie ROM which is stable enough. I'm thinking of downgrading it to nought tho LOL.
CarbonROM Oreo
LineageOS 14 (Android 7.1.2)
crDroid v5.8 (Android 9)
Blissroms v 12.2 Android 10
Ressurection remix oreo and agni kernel
aex 4.6 with agni 13.8 best battery backup i had till now
Lineage os 17.1 - it's the most stable android 10 rom for my device. Bliss has a couple of bugs. The other rom i keep shifting to is evolution X. That's also relatively bug free - although you might have to flash volte fix zip. But nonetheless performance wise,its nice.
MooshMer said:
aex 4.6 with agni 13.8 best battery backup i had till now
Click to expand...
Click to collapse
Thanks for sharing combo. Which version of AEX 4.6 ?
Also if VoLTE working?
mGforCe said:
Thanks for sharing combo. Which version of AEX 4.6 ?
Also if VoLTE working?
Click to expand...
Click to collapse
https://forum.xda-developers.com/redmi-note-3/development/rom-aospextended-rom-v4-6-t3837372 This is the version im using. For VoLTE i dont use so i dont know sorry...
I am still running Resurrection Remix Nougat on my Redmi note 3 with radon kernal. Its stable and have no problem at all.
However, I have also old version of magisk installed as I use Dolby sound mod which is not compatible with the newer magisk version. Can anyone point me out a good sound mod that work both for the latest version and nougat?
yurijack said:
I am still running Resurrection Remix Nougat on my Redmi note 3 with radon kernal. Its stable and have no problem at all.
However, I have also old version of magisk installed as I use Dolby sound mod which is not compatible with the newer magisk version. Can anyone point me out a good sound mod that work both for the latest version and nougat?
Click to expand...
Click to collapse
can you share the link of the rom and kernel with about phone screenshot.