Check out the center of the cameras field of view vs the edges, why is it distorting my asshole cat like this? In the distored pic her ugly mug was near the edge of the field of view.
Related
Hey, I noticed during some videos that the thickness of the phone decreases towards the bottom, and now I was wondering if someone could give me a little insight or impression on that.
Is the thickness of the Razr m (8.3mm/0.33in) measured at the top or bottom?
and if its measured from the bottom, how thick is the top?
Thanks a lot, all answers are appreciated! :good:
Mine measures:
10.6mm / 0.42" at the top edge
9.04mm / 0.35" at the bottom edge of the screen bezel
There is a very slight raised bezel on both front and rear of my phone, so the thickness shown here is measured across the edges of those bezels.
Measured from the surface of the screen to the kevlar rear panel, it's slightly thinner since the lightly raised bezels are out of the picture:
10.2mm at the top, tapering to 8.4mm at the bottom
Hope this info helps. For what it's worth, my RAZR M is 2.398" wide (looks like Moto/VZW must round down!) and 4.822" tall.
On my scale, it's 125g or 4.41oz.
yes this helps a lot ! thank you
* Please take a look at the attached picture for easier understanding.
I've been using my Nexus 4 for a week until now, and someday I looked at the top bezel carefully, (with proper angle & light)
and I found out that there are 2 shining lines under the glass. (As you know the bezel is supposed to be just black without any decorations or marks.)
The right one is right below the front speaker, and the middle one is right below the perimeter dividing the area in half.
They are very short(like a millimeter), and shiny like some kind of metal. They look like some cracks of the bezel.
But the front glass is just fine and there are no scratches on the surface now. And I never dropped or hit my phone.
I'm not sure the lines are from the beginning or created after unboxing.
Anyone sees the same thing or knows about it?
Hi guys,
I'v been my new s8 for a few days, and i noticed that the edge of rear glass, specially on bottom side, has paint off, so i can clearly see 1 mm of dust. Other sides are ok
Have you noticed this on your unit?
Thanks
Do you have an image with this issue? I have never heard of this issue for newer models.
RossTeagan said:
Do you have an image with this issue? I have never heard of this issue for newer models.
Click to expand...
Click to collapse
I can't take at the moment, but i'll try to describe better.
On the bottom side of the back panel, where the glass meets metal, there is 1mm or less of paint off. Initially i thought it was the classic gap, but trying to pass a piece of paper in, i was able to clearly view the paper throught the glass. It's just 1mm or less around the bottom side.
That happened to me on s7 edge (front top edge). The glass was aligned with the frame, but the paint didn't go all the way to the edge so I could see the glue under the glass. That's aesthetically ugly but that's all... I hate samsung's quality standards -.-
So i am the only One with this problem?
Has anyone else noticed slight ripples on the underside of their s8 glass screen uniformly along the top near the cameras and sensors.
I say ripples, but this may not be the correct terminology. Kind of like some roller lines from tempering process or screen curving??
These can only be seen under angled lighting conditions and don't show up on a photo.
Just received the s8 as a replacement for a one with really wobbly buttons and only 3 weeks old.
Don't want to send back if normal (as phone is good otherwise).
Some shop display one's seemed to have it to some degree but hard to see the top bezel properly due to lights being too bright.
It's a crease in the front glass panel. My black S8 has a pair of matching (mirror image) creases on the right-side top and bottom corners. They are curved creases in the glass that point to the corners. You can only see it under the right light and angle. It looks like a defect in the curving process. But I am happy with the phone and this doesn't bother me.
I sometimes wonder if this affected a large production batch and those are the units that Samsung sold at $425 (after promotion and rebate, and how I got mine). I cannot imagine that Samsung is unaware of it.
It doesn't look like a crease to me, it looks like either roller lines or moulding marks on the underside of the glass. Only visible under certain lighting.
Anyone else seen this?
Anyone else noticed this??
I had received my tab s5e WiFi edition about 10 days back. Device has not fallen , nor does it have any scuffs or dents.
Just noticed today that there is a slight gap(please use a flashlight & look closely) centrally above front camera between screen glass edge & metal border. Unable to show it on snaps. Anybody else noticed this? Is it by design, for earpiece? The device seems to support some form of voice calling? My return window is closing soon, if its a defect than defective design.
With your fingernail move from camera towards end of bezels, it should feel the same for left tablet side and right tablet side. And it should feel the same for top tablet side and bottom tablet side. You can use left hand and right hand if your fingernails are equal.
Using your thumbs from your hand moving symmetrical and it feels the same with the only difference at the side of the camera you only see the camera, but it should feel symmetrical.
Left should feel as right, and top should feel as bottom.
This is best performed holding in landscape with camera left.
Top and bottom are here equal but left and right are also equal although bezels in landscape top and bottom are little smoother.
Your fingernails should feel a fraction of a millimeter gap which must be symmetrical equal.
Thanks catmobile for the detailed reply.
So your device doest have the issue.
On my device there is a definite centrally located gap above camera which is asymmetrical to bottom. Gap itself is asymmetrical in relation to both sides of front camera. Its only about 1 mm or less , if I shine light I can see internals slightly through the gap.
tuxing said:
Thanks catmobile for the detailed reply.
So your device doest have the issue.
On my device there is a definite centrally located gap above camera which is asymmetrical to bottom. Gap itself is asymmetrical in relation to both sides of front camera. Its only about 1 mm or less , if I shine light I can see internals slightly through the gap.
Click to expand...
Click to collapse
It should be symmetrical at both sides. I think you can only capture it with the Sun as sidelight and a mobile camera of good quality.
As I read you must decide within hours to get replacement.
The whole smooth symmetrical gaps between glass and bezel all around entire tablet are normal but absolutely not central only.
I advise replacement!
---------- Post added at 11:48 AM ---------- Previous post was at 11:15 AM ----------
tuxing said:
Thanks catmobile for the detailed reply.
So your device doest have the issue.
On my device there is a definite centrally located gap above camera which is asymmetrical to bottom. Gap itself is asymmetrical in relation to both sides of front camera. Its only about 1 mm or less , if I shine light I can see internals slightly through the gap.
Click to expand...
Click to collapse
Notify supplier for return ticket number and order. Send it with track and trace and posting insurance. Better to pay extra for swapping. This is a fast extra post since it's Friday and you're almost out of time.
Let us know!