[Firmware Miui v7.1.12] & [SuperSu v2.79] For Kenzo - Xiaomi Redmi Note 3 Guides, News, & Discussion

WARNING:- I AM NOT RESPONSIBLE FOR ANY BRICK OF YOUR DEVICE SO DO IT ON YOUR OWN RISK!
Link:-
Firmware- https://drive.google.com/file/d/0B803ZxoErIryOVZvOFNIcVppMkU/view?usp=drivesdk
SuperSu- https://drive.google.com/file/d/0B803ZxoErIryN1RSTVdSTlE1bVk/view?usp=drivesdk
This is Miui firmware v7.1.12 and supersu v2.79.
Flashing guide:-
1. Go to recovery
2. select install
3. Select your zip (Firmware/Supersu)
4. Flash
5.Done!??

Bootloader will get locked again or u removed the emmc

ppsonlyone said:
Bootloader will get locked again or u removed the emmc
Click to expand...
Click to collapse
No bootloader will not get locked

Suplex City said:
WARNING:- I AM NOT RESPONSIBLE FOR ANY BRICK OF YOUR DEVICE SO DO IT ON YOUR OWN RISK!
Link:-
Firmware- https://drive.google.com/file/d/0B803ZxoErIryOVZvOFNIcVppMkU/view?usp=drivesdk
SuperSu- https://drive.google.com/file/d/0B803ZxoErIryN1RSTVdSTlE1bVk/view?usp=drivesdk
This is Miui firmware v7.1.12 and supersu v2.79.
Flashing guide:-
1. Go to recovery
2. select install
3. Select your zip (Firmware/Supersu)
4. Flash
5.Done!
Click to expand...
Click to collapse
You should mention KATE or KENZO otherwise people will loose their IMEI.

khajiit said:
You should mention KATE or KENZO otherwise people will loose their IMEI.
Click to expand...
Click to collapse
Thnx for suggestion but firmware can be install in both device

Suplex City said:
Thnx for suggestion but firmware can be install in both device
Click to expand...
Click to collapse
What? Both devices have different modems? How can this firmware be installed on both devices? Did you test it?

khajiit said:
What? Both devices have different modems? How can this firmware be installed on both devices? Did you test it?
Click to expand...
Click to collapse
I didn't tasted it bcz i have only kenzo but i had seen in many thread that so many people had installed this firmware and u can also search it on any rom thread:victory:

Suplex City said:
I didn't tasted it bcz i have only kenzo but i had seen in many thread that so many people had installed this firmware and u can also search it on any rom thread:victory:
Click to expand...
Click to collapse
Only roms are compatible.
Firmware not. Becareful and change to only Kenzo.

RootNightmareX said:
Only roms are compatible.
Firmware not. Becareful and change to only Kenzo.
Click to expand...
Click to collapse
It is already changed

Related

MiUI Firmware Files

Device: Kenzo
This firmware won't relock your bootloader
Both official & unofficial UBL able to use this firmware
Hello Guys,
After tried on several custom ROM -MM & N-, I realized that's we can use MiUI MM firmware on any custom ROM and those ROM will still worked like a charm.
Below firmware are the same firmware included at miui ROM, I just put the files without any changes. Just removed emmc_appsboot.mbn file to avoid relocked bootloader.
MiUI 6.11.3 firmware can be used for people which need efs backup from this firmware to be restored later on any custom ROM to gain volte feature without needed to flash full ROM using miflash.
MiUI 6.11.24 firmware, the same firmware provided at official CM14.1 thread. but, this one won't relock your bootloader.
Download:
MiUI 6.11.3 Firmware
MiUI 6.11.24 Firmware
I already tried both firmware on several custom ROM and everything work flawlessly on my phone.
Thanks.
new releases from 6.11.3 upwards dont contain emmc.appsboot.mbn, does that mean xiaomi made some changes with newer versions and wont relock BL any.ore if we already unlocked it?
Nice onw
Sent from my Redmi Note 3 Pro using Tapatalk
Oscilator said:
new releases from 6.11.3 upwards dont contain emmc.appsboot.mbn, does that mean xiaomi made some changes with newer versions and wont relock BL any.ore if we already unlocked it?
Click to expand...
Click to collapse
no...miui rom still contain emmc_appsboot.mbn file which potentially relock your bootloader. the files thats i am provided, didn't contain this file to avoid relock bl.
febry_valdy said:
Nice onw
Sent from my Redmi Note 3 Pro using Tapatalk
Click to expand...
Click to collapse
thanks bro
Maybe because im using eu roms...but eu rom 6.11.3 did have emmc.appsboot.mbn in firmware...new releases dont
Oscilator said:
Maybe because im using eu roms...but eu rom 6.11.3 did have emmc.appsboot.mbn in firmware...new releases dont
Click to expand...
Click to collapse
that's really nice, seems eu team didn't want anyone get unlock problem which using their rom.
abihary said:
no...miui rom still contain emmc_appsboot.mbn file which potentially relock your bootloader. the files thats i am provided, didn't contain this file to avoid relock bl.
Click to expand...
Click to collapse
True. Just tried and no relock of bootloader.
cristianopenetra said:
True. Just tried and no relock of bootloader.
Click to expand...
Click to collapse
Tried with Which ROM?
Abdeali Bhagat said:
Tried with Which ROM?
Click to expand...
Click to collapse
almost all custom ROM didn't have any problem used this firmware.
try it & you'll know the difference
It worked for me thanks!!
Abdeali Bhagat said:
It worked for me thanks!!
Click to expand...
Click to collapse
great...enjoy your device
Bro, will the latest miui firmware lock my bootloader?
Sent from my Redmi Note 3 using Tapatalk
febry_valdy said:
Bro, will the latest miui firmware lock my bootloader?
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
probably yes...if you doesn't want take a risk about that, remove emmc_appsboot.mbn file from the firmware and your bootloader will be remain unlocked
I am thinking on to put on CM14 to my redmi note 3 pro kenzo 2GB.
it has been recommended to me:
-use normal XDA CM14, but then use RADON kernel.
questions: is this the best? is the firmware.zip still needed when using this?
another recommendation for me:
use this: http://forum.xda-developers.com/redmi-note-3/how-to/miui-firmware-files-t3516487
because this will not re lock the phone?
what about this? is the radon kernel, and/or the Firmware.zip still needed for this?
unclear to me.
which is the BEST CM14 way for redmi note 3 pro kenzo 2gb?
thx
martin5martin5 said:
I am thinking on to put on CM14 to my redmi note 3 pro kenzo 2GB.
it has been recommended to me:
-use normal XDA CM14, but then use RADON kernel.
questions: is this the best? is the firmware.zip still needed when using this?
another recommendation for me:
use this: http://forum.xda-developers.com/redmi-note-3/how-to/miui-firmware-files-t3516487
because this will not re lock the phone?
what about this? is the radon kernel, and/or the Firmware.zip still needed for this?
unclear to me.
which is the BEST CM14 way for redmi note 3 pro kenzo 2gb?
thx
Click to expand...
Click to collapse
my best way in term of custom rom flashing
1. firmware 6.11.24, only need to flash once. no need to reflashing as long as you didn't flash any other firmware. even you flash other custom rom, your firmware will remain untouch.
2. any custom rom, either MM or N
3. gapps
4. mods, any mods need to installed on your phone (i.e. SU app, kernel, sound mod, etc)
hope this clear for you
Please update link for 6.11.3 its not working
KakaRrottt said:
Please update link for 6.11.3 its not working
Click to expand...
Click to collapse
done
how to create a firmware.zip from the latest miui 6.12.22
abihary said:
my best way in term of custom rom flashing
1. firmware 6.11.24, only need to flash once. no need to reflashing as long as you didn't flash any other firmware. even you flash other custom rom, your firmware will remain untouch.
2. any custom rom, either MM or N
3. gapps
4. mods, any mods need to installed on your phone (i.e. SU app, kernel, sound mod, etc)
hope this clear for you
Click to expand...
Click to collapse
How to known that firmware is installed or not cos I use firmware and dont use it still the device boots up properly. So, simplest question is what is the benefit of flashing miui firmwares before flashing main ROM?
Sent from my Redmi Note 3 using Tapatalk

Downgrade to Mm

Hello guys i'm on LineageOS but i don't know how to downgrade to stock Marshmallow, i tried to search on forum but didnt find something useful to me. Can Someone help me?
Hello
Do.you have access to TWRP and unlocked bootloader? Also, you gonna need to save your bootloader unlock code
MatoXD said:
Hello
Do.you have access to TWRP and unlocked bootloader? Also, you gonna need to save your bootloader unlock code
Click to expand...
Click to collapse
I have twrp and unlocked bootloader Also unlock code
arberinho said:
I have twrp and unlocked bootloader Also unlock code
Click to expand...
Click to collapse
Whts your OEM version C432 or C636?
arberinho said:
I have twrp and unlocked bootloader Also unlock code
Click to expand...
Click to collapse
You can try flashing oeminfo and then stock UPDATE.app via force EMUI update, but data might get deleted
MatoXD said:
You can try flashing oeminfo and then stock UPDATE.app via force EMUI update, but data might get deleted
Click to expand...
Click to collapse
i tried to d in this method, but with emui 5.0 beta doesn't work
97filippo said:
i tried to d in this method, but with emui 5.0 beta doesn't work
Click to expand...
Click to collapse
I can probably see right now, you've done it wrong... Download stock rom from huawei.consumer... For some reason i thought it's gonna be android MM, but it was android N, so no problem here, just download stock rom and you will have newest android.
You probably downloader rom from xda, rom it's in .zip right? And you tried to flash it with TWRP?
MatoXD said:
I can probably see right now, you've done it wrong... Download stock rom from huawei.consumer... For some reason i thought it's gonna be android MM, but it was android N, so no problem here, just download stock rom and you will have newest android.
You probably downloader rom from xda, rom it's in .zip right? And you tried to flash it with TWRP?
Click to expand...
Click to collapse
already tried with dload mode... nothing works and i can't flash any custom recovery... in cmd i see FAILED when i do fastboot flash recovery path/recovery.img (path=c:\user\etc...)
MatoXD said:
I can probably see right now, you've done it wrong... Download stock rom from huawei.consumer... For some reason i thought it's gonna be android MM, but it was android N, so no problem here, just download stock rom and you will have newest android.
You probably downloader rom from xda, rom it's in .zip right? And you tried to flash it with TWRP?
Click to expand...
Click to collapse
Where Can i download the stock rom?
arberinho said:
Where Can i download the stock rom?
Click to expand...
Click to collapse
You can find stock ROMs there https://forum.xda-developers.com/huawei-p9lite/how-to/nougat-official-firmware-t3512932
So Guys i can install stock nougat Just by installing b360 with TWRP?
arberinho said:
So Guys i can install stock nougat Just by installing b360 with TWRP?
Click to expand...
Click to collapse
it seems like that
97filippo said:
it seems like that
Click to expand...
Click to collapse
I need a safe mode bro, i don't want to brick
arberinho said:
I need a safe mode bro, i don't want to brick
Click to expand...
Click to collapse
man read the guide, it's wrote that u do that at your own risck. it could brick or it couldn't
97filippo said:
man read the guide, it's wrote that u do that at your own risck. it could brick or it couldn't
Click to expand...
Click to collapse
I know but usually It bricks if i don't follow the right steps, i was Just asking if Someone had my same problem
is more secure doing with twrp because u can do a backup. i made with BETA app and nonw i have a lot of problems
97filippo said:
i tried to d in this method, but with emui 5.0 beta doesn't work
Click to expand...
Click to collapse
Yesterday I had this issue, it's more easy than it seems. In Revolution Recovery for Nougat, flash the update.app ZIP with 6.0 , it will show you a lot of errors, but don't worry, it's ok. After this flash than DUALSIMOEM.zip and after that shutdown your phone and use the 3 buttons method to automatically ,,update" to B161.
robi10101298 said:
Yesterday I had this issue, it's more easy than it seems. In Revolution Recovery for Nougat, flash the update.app ZIP with 6.0 , it will show you a lot of errors, but don't worry, it's ok. After this flash than DUALSIMOEM.zip and after that shutdown your phone and use the 3 buttons method to automatically ,,update" to B161.
Click to expand...
Click to collapse
I tried to install that recovery but i can't.. When i flash it in cmd i see FAILED... I'll send a screen asap from my pc
97filippo said:
I tried to install that recovery but i can't.. When i flash it in cmd i see FAILED... I'll send a screen asap from my pc
Click to expand...
Click to collapse
That's because u don t have the bootloader unlocked Also, verify in Developer Options to have Enable OEM on, that's why you have an error in CMD
robi10101298 said:
That's because u don t have the bootloader unlocked Also, verify in Developer Options to have Enable OEM on, that's why you have an error in CMD
Click to expand...
Click to collapse
i have unlocked my bootloader, but i need to check OEM.. ty
------- EDIT -------
i ust unlocked OEM, this evening i'll try to fix my phone! thank you man.. i failed that lel

[7.0][STOCK] Lenovo P2a42 Stock Nougat Update [S232]

Hi guys, I created a zip for those who rooted or flashed custom rom on their phones.Also, I will share official ota link so that you can flash it through stock recovery.
Flashable zip for TWRP users:
MEGA: https://mega.nz/#!b4dCjDST!X8KX1CPaoKgjBByIBz8ZuAnMvd7YkOzLOMd5kZa1AHQ
AndroidFileHost: https://www.androidfilehost.com/?fid=529152257862715477
Flashing instructions:
- Reboot to TWRP
- Make your wipes (data,cache,dalvik,system)
- Flash this from "install" section
- Reboot and use it.
Flashable official OTA zip for stock recovery users:
Lenovo: http://phonedl.ota.lenovomm.com/dls/v6/P2a42_S062_170117_ROW_TO_P2a42_S232_170320_ROW_WC00AFB1F4.zip
Mail.ru: https://cloud.mail.ru/public/Dc2v/wS3z7dtgF
Flashing instructions:
- Reboot to stock recovery
- Change the name of the zip to update.zip(Thanks: @The Mero)
- Flash this from "install update package" section
- Reboot and use it.
Thanks:
@"EypCnn"
Would the stock OTA update cause any issues for UK 3 Branded phones?
The official update for us is going to be a while I think.
TIA ?
Would warranty still be intact as well?
Thank you and me
Treboeth said:
Would the stock OTA update cause any issues for UK 3 Branded phones?
The official update for us is going to be a while I think.
TIA
Would warranty still be intact as well?
Click to expand...
Click to collapse
You should try it.I don't think it will affect your warranty because it is an official ota zip.This zip only checks if your phone is marshmallow or not, if it is mm, then it should flash properly.
Treboeth said:
Would the stock OTA update cause any issues for UK 3 Branded phones?
The official update for us is going to be a while I think.
TIA
Would warranty still be intact as well?
Click to expand...
Click to collapse
Did it work?
xdragonforce said:
Did it work?
Click to expand...
Click to collapse
Will probably try it in a day or so, need my phone intact for now with all my junk on it
Sent from my Lenovo P2a42 using Tapatalk
I had to use SuperSU 2.79 to get proper (systemless) root, maybe this helps anyone. 2.78 got me rooted but my SIM didn't work with it.
Treboeth said:
Will probably try it in a day or so, need my phone intact for now with all my junk on it
Sent from my Lenovo P2a42 using Tapatalk
Click to expand...
Click to collapse
FYI for anyone on Three UK P2's, this works perfectly.
Was waiting for it, thanks.
Drillz said:
I had to use SuperSU 2.79 to get proper (systemless) root, maybe this helps anyone. 2.78 got me rooted but my SIM didn't work with it.
Click to expand...
Click to collapse
I successfully rooted with this method: https://forum.xda-developers.com/lenovo-p2/development/guide-lenovo-p2-nougat-root-method-t3578811
im on three
wzedlare said:
Hi guys, I created a zip for those who rooted or flashed custom rom on their phones.Also, I will share official ota link so that you can flash it through stock recovery.
Flashable zip for TWRP users:
MEGA: https://mega.nz/#!b4dCjDST!X8KX1CPaoKgjBByIBz8ZuAnMvd7YkOzLOMd5kZa1AHQ
AndroidFileHost: https://www.androidfilehost.com/?fid=529152257862715477
Flashing instructions:
- Reboot to TWRP
- Make your wipes (data,cache,dalvik,system)
- Flash this from "install" section
- Reboot and use it.
Flashable official OTA zip for stock recovery users:
Lenovo: http://phonedl.ota.lenovomm.com/dls/v6/P2a42_S062_170117_ROW_TO_P2a42_S232_170320_ROW_WC00AFB1F4.zip
Mail.ru: https://cloud.mail.ru/public/Dc2v/wS3z7dtgF
Flashing instructions:
- Reboot to stock recovery
- Flash this from "install update package" section
- Reboot and use it.
Thanks:
@"EypCnn"
Click to expand...
Click to collapse
i have the uk three network edition and this wont install at all ,(not rooted)
Casper cobain said:
i have the uk three network edition and this wont install at all ,(not rooted)
Click to expand...
Click to collapse
The update is probably detecting the 3 version as a different rom so it wont install . If you flash to S048 row rom , let it update to S062 then you should receive the OTA update to nougat
wzedlare could you change your post to tell people to rename the stock rom from - P2a42_S062_170117_ROW_TO_P2a42_S232_170320_ROW_WC00AFB1F4.zip to UPDATE.zip
It will save lots of people saying it wont flash
The Mero said:
wzedlare could you change your post to tell people to rename the stock rom from - P2a42_S062_170117_ROW_TO_P2a42_S232_170320_ROW_WC00AFB1F4.zip to UPDATE.zip
It will save lots of people saying it wont flash
Click to expand...
Click to collapse
Thanks, I added it to the thread.
Thanks, nice stock rom, i tested with my own latest Unofficiall TWRP-3.1.0-0, result successfully
your welcome wzedlare , keep up the great work
If you flash any of the stock ROMs, will it affect a bootloader unlock timer that is in progress with Lenovo? Will it get reset or fail to activate in some way?
Undesirable said:
If you flash any of the stock ROMs, will it affect a bootloader unlock timer that is in progress with Lenovo? Will it get reset or fail to activate in some way?
Click to expand...
Click to collapse
I won't unlock your bootloader.It is the official ota zip.
Undesirable said:
If you flash any of the stock ROMs, will it affect a bootloader unlock timer that is in progress with Lenovo? Will it get reset or fail to activate in some way?
Click to expand...
Click to collapse
When you apply to unlock the bootloader the phone contacts Lenovo over the internet , so the countdown timer runs from their end . so your safe to reset , upgrade etc
The Mero said:
wzedlare could you change your post to tell people to rename the stock rom from - P2a42_S062_170117_ROW_TO_P2a42_S232_170320_ROW_WC00AFB1F4.zip to UPDATE.zip
It will save lots of people saying it wont flash
Click to expand...
Click to collapse
tried this but not happening and i cant get the device to connect to pc after i boot to fastboot

[info] recent roms in the x501 model dont work

hi guys. im writing this, after a day saying in the recent roms threads, rr nougat, lineage nougat and aicp that none of this roms boot in the x501 model. no info about this has been wrote in the op to inform users about this. so if you have x501, dont flash this or, if you dont have a backup, you will have a soft bricked device.
cheers
nosidefcp said:
hi guys. im writing this, after a day saying in the recent roms threads, rr nougat, lineage nougat and aicp that none of this roms boot in the x501 model. no info about this has been wrote in the op to inform users about this. so if you have x501, dont flash this or, if you dont have a backup, you will have a soft bricked device.
cheers
Click to expand...
Click to collapse
What error are you getting? are you on latest TWRP (3.1.0) and MM bootloader?
Ive tried 3.1 and 3.03. They just get stuck in bootanimation. Im currently in lollipop eui. Do we need to flash a MM eui ROM first in order to get the bootloader? Por can o flash the bootloader separatedly?
nosidefcp said:
Ive tried 3.1 and 3.03. They just get stuck in bootanimation. Im currently in lollipop eui. Do we need to flash a MM eui ROM first in order to get the bootloader? Por can o flash the bootloader separatedly?
Click to expand...
Click to collapse
yes of course, u should be on EUI 5.8.017S+ before flashing any of these ROMs.
@wisniapl any idea to fix?
thinhx2 said:
@wisniapl any idea to fix?
Click to expand...
Click to collapse
Check this https://forum.xda-developers.com/le...nt-roms-x501-model-dont-t3581761/post71669214
reversegear said:
Check this https://forum.xda-developers.com/le...nt-roms-x501-model-dont-t3581761/post71669214
Click to expand...
Click to collapse
you can send me link eui 17s can flash via twrp ? because in few mounth ago i flashed marshmallow and bricked
thinhx2 said:
you can send me link eui 17s can flash via twrp ? because in few mounth ago i flashed marshmallow and bricked
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B1WkscrFwUhsSWlpODJneEVsNzQ/view
Not mine, but this should work.
If you have the original zip, from le.com, you can modify the updater-script in it to make it for x3, instead of x3_hk
nosidefcp said:
hi guys. im writing this, after a day saying in the recent roms threads, rr nougat, lineage nougat and aicp that none of this roms boot in the x501 model. no info about this has been wrote in the op to inform users about this. so if you have x501, dont flash this or, if you dont have a backup, you will have a soft bricked device.
cheers
Click to expand...
Click to collapse
Can you give build.prop of your device? maybe it will help.. I will check into this
sscsps said:
https://drive.google.com/file/d/0B1WkscrFwUhsSWlpODJneEVsNzQ/view
Not mine, but this should work.
If you have the original zip, from le.com, you can modify the updater-script in it to make it for x3, instead of x3_hk
Click to expand...
Click to collapse
This rom need flash via stock recovery or can flash via twrp?
thinhx2 said:
This rom need flash via stock recovery or can flash via twrp?
Click to expand...
Click to collapse
Did you even open the link?
The name of the file itself says twrp flashable..
You need to flash it via twrp
sscsps said:
https://drive.google.com/file/d/0B1WkscrFwUhsSWlpODJneEVsNzQ/view
Not mine, but this should work.
If you have the original zip, from le.com, you can modify the updater-script in it to make it for x3, instead of x3_hk
Click to expand...
Click to collapse
my phone has bricked after flash it, x501
thinhx2 said:
my phone has bricked after flash it, x501
Click to expand...
Click to collapse
Which recovery did you use?
I think you did something wrong in the process to get your phone bricked(I assume its a soft brick).
Now you need to reflash a working rom
sscsps said:
Which recovery did you use?
I think you did something wrong in the process to get your phone bricked(I assume its a soft brick).
Now you need to reflash a working rom
Click to expand...
Click to collapse
Last twrp 3.1. I just want flash 7.1.2 for letv 1s x501. Now i comeback rui 5.0.2
Go to twrp,wipe data,cache,dalvik,system and flash rom
thinhx2 said:
Last twrp 3.1. I just want flash 7.1.2 for letv 1s x501. Now i comeback rui 5.0.2
Go to twrp,wipe data,cache,dalvik,system and flash rom
Click to expand...
Click to collapse
First, apply this update: http://forum.le.com/in/eui_detail.html?euiid=210
And then flash the 7.1.2 rom
sscsps said:
First, apply this update: http://forum.le.com/in/eui_detail.html?euiid=210
And then flash the 7.1.2 rom
Click to expand...
Click to collapse
you can share for me your''s letv account?
thinhx2 said:
you can share for me your''s letv account?
Click to expand...
Click to collapse
No, I can't
If any one have le 1s related problem and solution or any one want to try new rom or kernal asap then all of u are welcome in our group on telegram so plz join with us
Requriemt
1. Download telegram from play store
2. Just click below link
https://telegram.me/LeSuperGroup
Thanks all of u

[TWRP] ZUI 3.5.243 [STABLE] [OFFICIAL] Zuk Z2 Plus [OREO] [8.0.0] [ROM]

STOCK ZUI 3.5 FOR ZUK Z2 PLUS
Chinese build
Version:8.0.0
ZUI 3.5.099 :
https://drive.google.com/file/d/1cxx-Bc2g3xdyzk2c3BCfzUNGVYv8Bs-w/view
ZUI 3.5.200 :
https://mega.nz/#!dWpBnJpL!ohLbnPnHj836ygpDfcZ7ficcJKO_Xvbpc3MVoxRsfjE
ZUI 3.5.218 :
https://drive.google.com/file/d/12B5Su__Fq5-BMeRxR_dRXlp5B9h5kQnT/view
ZUI 3.5.225 : (Twrp)
https://mega.nz/#!cscQ0bCB!5-Y0sVMMhE7dhOuyHynmKKjsaehI0K9g9Jm5WEeQjLI
ZUI 3.5.233 :
QPST:https://drive.google.com/file/d/1zjOE9uB2nhQPInR0Kqw2jUyC7fnoEkYw/view?usp=drivesdk
ZUI 3.5.243 ST :
STEPS FOR FLASHING ZUI 3.5.243 ST TWRP:
(1) Keep your Mind in working condition and make sure you are not a Pro noob.
(2)Make sure you are on TWRP 3.2.1.0
(3) Now wipe everything except internal storage,and unmount system.
(4) Flash rom
(5)Now flash Twrp 3.0.3.0
(5)Now flash gapps and magisk
(6) Now boom!! Reboot?
You are now on ZUI 3.5.243 ST
ROM- http://fmdl.ota.lenovomm.com/dls/v6...0030.1_O_ZUI_3.5.243_ST_180126_WC77C3CFD9.zip
GAPPS- https://drive.google.com/file/d/0BwCC_QZMRsaaRFVnSW1pQzJ4bDg/view
DONT ASK **** QUESTIONS THAT IT WILL BOOT OR NOT WILL IT BRICK OR LOCK BOOTLOADER, I TESTED IT MYSELF AND ITS TOTALLY SAFE . NO ENCRYPTION. AND NO INBOX SPAMS PLZ.
TRY AT UR OWN RISK
How is the rom? Did u flash it?
mmahith18 said:
How is the rom? Did u flash it?
Click to expand...
Click to collapse
Only Few flashed! Still Downloading.
Do I need to flash gapps?
mmahith18 said:
Do I need to flash gapps?
Click to expand...
Click to collapse
No
Dhinesh1999 said:
No
Click to expand...
Click to collapse
Did you tried it? Is it able to boot? Does it works?
Zholdoshbaev said:
Did you tried it? Is it able to boot? Does it works?
Click to expand...
Click to collapse
Screenshot shows its Bootable and works.. But it bricked many
Dhinesh1999 said:
Screenshot shows its Bootable and works.. Yes It works fine
Click to expand...
Click to collapse
How did you installed it?
Does it lock bootloader?
Zholdoshbaev said:
How did you installed it?
Click to expand...
Click to collapse
Twrp (Not me)
paps2k3 said:
Does it lock bootloader?
Click to expand...
Click to collapse
Probably no! (No confirmation)
People have reported it doesn't boot. Wait for a dev to release the rom guys. It'll brick your phone.
Updater process ends with error 7 for me.
Dhinesh1999 said:
Probably no! (No confirmation)
Click to expand...
Click to collapse
Gave me error 7 while trying to install on latest twrp
actually it should flash based on 3.1.117 official ROM and.... after flashing this room cannot mount the data in TWRP
chrislixu said:
actually it should flash based on 3.1.117 official ROM and.... after flashing this room cannot mount the data in TWRP
Click to expand...
Click to collapse
I think we should have stock recovery
Can i flash on zui 3.1.117 via stock recovery...?
Anyone reply...
This brick the phone, wait for more information
Do not flash guys. It has caused several bricks already. It doesnt flash for many, errors. It locks BL.
THIS THREAD IS IN THE WRONG PLACE. @xanthrax can you please move it to guides section?
Any update to baseband with new stock oreo? Someone please upload a screenshot of new baseband?.. ??

Categories

Resources