I have a 910C updated to NK5 and am only able to use the IR blaster sporadically, i.e. it works once then stops a few minutes later. I've read that this only affects certain Note 4 models, I've tried several IR apps and all have the same issue so it's definitely not app related.. According to Anymote comments, they mentioned that the workaround involved modifying the way the Note 4 sends out the IR codes or something.
Please mention:
- Your model version
- Build number
- Success percentage of IR signals (ex. mine is less than 20%)
SM-N910C
KTU84P.N910CXXU1ANK5
Less than 20%
gabster21 said:
I have a 910C updated to NK5 and am only able to use the IR blaster sporadically, i.e. it works once then stops a few minutes later. I've read that this only affects certain Note 4 models, I've tried several IR apps and all have the same issue so it's definitely not app related.. According to Anymote comments, they mentioned that the workaround involved modifying the way the Note 4 sends out the IR codes or something.
Please mention:
- Your model version
- Build number
- Success percentage of IR signals (ex. mine is less than 20%)
Click to expand...
Click to collapse
SM-N910C
KTU84P.N910CXXU1ANK5
Less than 20%
as well
this sucks!
IR Blaster
Att Note 4
N910a
KTU84P.N910AUCU1ANIE
Functions about 100% of the time when I use it with "Smart remote". Loads my vizio, apex, samsung, lg, tv, receivers, etc. All of which when I find the code that works best, work great. Only thing is that it has a slight delay, so when I mash on the button it will keep firing long after if I click it like 30 times in 2 seconds, it will do it 2-3 times a second, untill it caught up with it.
I wrote to Samsung support about the issue, their solution involved blaming 3rd party apps for the issue and suggesting using their soon to be decommissioned What's On application that obviously didn't work. Absolutely useless.
Solution found.
1. Clear the settings of smart remote app, Remove the updates of smart remote app using application manager, and force close it and reboot the mobile.
Its the latest version of it that breaks the IR. The guys paying someone for the fix are being scammed most likely.
The older version send IR signals in a slow fashion and it works perfectly fine. The latest version overdrives the IR module hardware capacity i guess and it breaks it....
Thanks
SM-N910U
KTU84P.N910UXXU1ANK7
Less than 20%
---------- Post added at 01:19 AM ---------- Previous post was at 01:08 AM ----------
ravian720 said:
1. Clear the settings of smart remote app, Remove the updates of smart remote app using application manager, and force close it and reboot the mobile.
Its the latest version of it that breaks the IR. The guys paying someone for the fix are being scammed most likely.
The older version send IR signals in a slow fashion and it works perfectly fine. The latest version overdrives the IR module hardware capacity i guess and it breaks it....
Thanks
Click to expand...
Click to collapse
It doesn't work for me, the latest is built-in in the firmware. And it seems the problem is from the IR driver not the software itself. Otherwise you can just install a 3rd party software to fix it.
Darnit...same here! At first after starting up the Smart Remote app it works fine, and after a while it stops working. rather anoying as I like this feature on my phone. Comes in very handy when watching TV and the phone at same time and needing to adjust volume or switch channels.
No option to remove any updates for the Smart Remote app in my case unfortunately.
N910C
Stock, latest software version
For me worked after a reboot using a 3rd Party App. It seems to die after sometime that the device is on. I really like this feature, in special because it save space to avoid to carry several remote controls with me.
I have the same problem, my IR blaster was working fine and it stopped working suddenly after the lollipop update.
I tried all solutions proposed by members in this forum and other forums (clearing cache, force stop the app, uninstall updates, restart) nothing seems to work!
SM 910c with lollipop 5.0.1
any suggestion guys?
same to me now it never work.
N910H
same to me after upgrading to lolipop 5.1.1
the infra red is not operating at all anymore..
I tried to uninstall the app and install it again, and tried different apps but no luck..
I also checked the infra red with another mobile camera but no indication that the infrared diode is operating though the upper blue led is functioning ok and is behaving always in the correct matter,
So i think its an issue regarding software....Are samsung aware of this frustrating problem?
should I return it to the agent since it is still under guarantee its onley 8 months..
any help will be greatly appriciated
I have a N910G and my IR blaster only works if I remove the plastic frame from the back of my phone.
Hi
This is really a warning to anyone who has an Android wear (or probably any other kind of smartwatch)
My Gear LIve and LG Watch R worked perfectly with KK and Lollipop but with MM 522 it just would not work properly at all
i worked with a dev of one of the apps and it was only the Huawei with MM that caused any problems and notifications were just not getting to the watch
MM on a samsung worked no trouble and going back to 5.1.1 on the M7 again worked perfect
I liked MM but i didnt see that much difference to being worth keeping without the watch
So if you are planning on Upgrading and have a smartwatch then you will have issues
I am now back on 5.1.1 and rooted and all works fine
I have Asus ZenWatch 2 and it works with B522 properly. Only issue I have noticed is infrequent unconnecting, about twice a week. But I just run Android Wear app and watch is connected again.
I must admit I'm surprised that's is working OK for you add the tests we got when trying to resolve the issues were all down to huawei and the non standard calls they make and the permissions issues that were occurring
The doze feature in mm seemed to be conflicting with huawei's own features and stopping a lot of the notifications getting through even though those apps were set to protected.
It also seemed to be an issue with 1 app calling another appointment and again even though that permission was granted it still gave us issues.
But I suppose in the end every setup is different and in all honesty I don't think mm was a great step up grim lollipop anyway or at least not on the huawei
Sent from my SM-N920C using XDA-Developers mobile app
I have a Samsung Gear S2 Classic and since I installed MM on my MT7-L09, Samsung Gear app will not not load, it just opens and closes in a flash.
The only way to make it work is to switch off the Bluetooth on the phone, then open the Samsung Gear App, and press connect from the app. This will switch the Bluetooth back on, connects to the watch and the app works.
Weird and very frustrating until I figured out a workaround!
Sent using Tapatalk
I have a moto 360 2nd gen and works with no issues what so ever with MM, if anything it has become more reliable so it may just be a conflict with particular manufacturers?
sthentic said:
I have a moto 360 2nd gen and works with no issues what so ever with MM, if anything it has become more reliable so it may just be a conflict with particular manufacturers?
Click to expand...
Click to collapse
I've got the first gen Moto 360. when I updated to MM my watch at didn't receive any notifications (even the test ones). I did a factory reset and everything works fine now. The only issue I have is that sometimes the Gmail app pushes a ton of notifications for the same email.
Hi guys, i hope everyone is doing great....this is my first post so if i post this in the wrong section or forum please do advise me or feel free to move it.
Alright i have a Samsung S5 SMG900i Australian one; unfortunately somehow the sensor stopped working what i mean is that gyro fails on screen test , auto rotation not working , neither when i play games that uses tilting , so yeah....phone seems broken, curious thing though is that if i reboot in safe mode and quicmyl get out of it and restar in normal mode, gyro will give readings and start working until it breaks down again within a few minutes; ive reinstalled using lates, old, experimental, nighlys. any room either official or stock still gyro and tilt sensor not working can anyone help me with this? Another thing is i love playing Airplane games now that gyro or tilt sensor is not working i want to see if i can either fox this issue , or i could get an app that draws a stick over the games and simulates the gyro with my movements? What i mean is; if i want to play a airplane simulator but the plane wont move because my phone is broken, anyone knows of an app that can simulate gyroscope or tilt movements with a simple joystick so i could move the planes as if i was moving the phone?.
I count with
S5
Cm13 latest nightly
Xposed
Root apps and adb
Please so helo me either find an app that can simulate gyro with a joystick or any way i could use root or xposed to force the gyroscopic sensor reset?.
Very very thanks in advance and i apologize for my bad english i tried my best to make myself as clear as possible.
Cheers.
so for a wile now I've been trying to get gear vr to work with with custom roms, mainly the light weight roms that have removed all Samsung stuff, I've gotten as far as getting most of the needed files installed and being able to launch a vr game, but one thing, once you do launch a game or anything vr and put the headset on you cant mover around on it, when you go to move your head it stays still, and I'm thinking its a driver issue or something not sure , any help to get it working will be awesome, and I'm just wondering why getting gear vr to work on rom is such a grey spot still?
Did you ever figure out how to load the Gear VR on lightweight ROMS? Trying on Project Alice. Not sure what to do. Thanks bud
Galaxy s8 plus G955FD
Android 9 pie
Rooted
Kernel A2N
OTG/USB type c
I´m trying to play games with my Joystick usb, but my phone not recognize it.
I saw youtube tutorials and try a lot of apps with no luck
anyone give me a light about this
Ok i have tested a lot of apps and Only this App Works
https://m.apkpure.com/br/usb-bt-joystick-center-2018-free/com.free.usbjoyfree/download?from=details
Have a little bug position when you put controls on your screen... But its works fine
I am looking for more apps or better solution.
I Will update this topic if i found something better.