Greetings I would need help with SGS4 I9505. Two days ago I swapped display, cell phone started and ran just a warming up and the battery is discharged from 100% to 0% within an hour. For breaking display I'm not using it for about six months. I was on it flash Resurrection Remix ROM 6 Marshmallow. I reset it to factory condition and battery last longer but still soaked (CPU 59 ° C). I tried also flash Resurrection Remix ROM version 7 but Nougat, after flash commonly settings fine but after a restart of carrying wifi but that is now irrelevant. I wanted him to flash a lower version of Android but TWRP 3.0.0.0 me when you start Flash ROM
Reported threw .zip file is corrupt and installation has taken place. I tried it out several Custom ROM but to no avail, always the same message. Carried easily reinstall or recovery when I wanted older version of TWRP or CWM so it carried. Then I tried it with the .iso file and restart of shat.After the restart does not boot into recovery. I get to download Odin me find him, but when run Flash Stock ROM as frozen and will finish it as follows:
<OSM> Please wait..
<OSM> BL_I9505XXUHOA7_CL3996895_QB3867680_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_I9505XXUHOA7_CL3996895_QB3867680_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_OXA_I9505OXAHOA7_CL3996895_QB3867680_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
Click to expand...
Click to collapse
I tried to replace the cable, and PC versions of Odin, select the flashlight SIM card and pamatovka, no change. When you turn on for a moment see the splash screen and restarts, this is repeated until you select the battery. On your phone hangs status of the download from the beginning. This can be a third report? Flash'm on it a lot of Custom ROMs and several on the day I wanted to find the most appropriate and not such a problem as now, but it happened. Consult please What to do?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Did you try flashing a stock ROM from sammobile.com as a single file in Odin's PDA/AP box?
Odin stops flashing aboot.mbn because you to need to use the original Samsung USB cable, try a different USB 2.0 port, the ROM is not for the phone, or the bootloader in the phone is newer than the bootloader in the ROM you are trying to flash.
Related
Hey guys i have a Galaxy S4 M919.I have Omega rom v10 and this is in my settings-> about device.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
When i try to follow the instructions in this thread http://forum.xda-developers.com/showpost.php?p=40778466&postcount=4 , cuz i wanna update to omega v22 , i get error flashing the bootloader and modems in odin.This is what i get :
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I9505XXUFNAD_481100_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_I9505XXUFNAD_481100_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and in the download mode it says :
START [224,1440]
SECURE CHECK FAIL : aboot
What is going wrong?
radd1ck said:
Hey guys i have a Galaxy S4 M919.I have Omega rom v10 and this is in my settings-> about device.
What is going wrong?
Click to expand...
Click to collapse
Hello there your flashing a modem/baseband that works for i9505 not with m919 If you wanna flash Omega v22 try to follow this instruction.Download Omegav22 and this Kernel copy both file to your Sdcard . now flash TWRP/ do a fullwipe and flash Omega v22 , Once your done , do not reboot your device , then flash the kernel. reboot, Done
okay i did that, now when i try to flash the omega rome it says FAILED... i have 2.6 gb free internal storage.What can it be?
Hello
I'm not sure if I'm doing this right so any help would be grateful. I currently have stock firmware installed and I'm trying to remove root from my phone. I searched around and it was suggested to reinstall stock firmware.
So I downloaded a stock rom from this thread, (UK_20H3G_20G900FXXU1ANE2_G900FH3G1AND4_H3G.zip - 1411.3 Mb - (because I'm on Three)) downloaded Odin, ran Odin, stuck my phone into download mode, loaded the firmware into Odin by clicking the PDA button, checked Auto Reboot and then hit start.
Here are the results;
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1ANE2_G900FH3G1AND4_G900FXXU1ANE2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> aboot.mbn
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I'm tried this about 3-4 times and I'm getting the same result each time.
What am I doing wrong?
Thanks.
Possible useful info?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
_McShane_ said:
Hello
I'm not sure if I'm doing this right so any help would be grateful. I currently have stock firmware installed and I'm trying to remove root from my phone. I searched around and it was suggested to reinstall stock firmware.
So I downloaded a stock rom from this thread, (UK_20H3G_20G900FXXU1ANE2_G900FH3G1AND4_H3G.zip - 1411.3 Mb - (because I'm on Three)) downloaded Odin, ran Odin, stuck my phone into download mode, loaded the firmware into Odin by clicking the PDA button, checked Auto Reboot and then hit start.
Here are the results;
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1ANE2_G900FH3G1AND4_G900FXXU1ANE2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> aboot.mbn
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I'm tried this about 3-4 times and I'm getting the same result each time.
What am I doing wrong?
Thanks.
Possible useful info?
Click to expand...
Click to collapse
my friend, im sure if you created the thread in Q&A forum
you will got the answer, next time questions can be ask in Q&A 's forum , you will probably have the answer of your problem
Anyone?
Hey guys, I think ive bricked this phone, I need to recovery the data from the phone aswell. any ideas on what to do?
Is it corrupted boot sector or recovery?
View attachment 3870231
Kind regards
sajjid_9 said:
Hey guys, I think ive bricked this phone, I need to recovery the data from the phone aswell. any ideas on what to do?
Is it corrupted boot sector or recovery?
View attachment 3870231
Kind regards
Click to expand...
Click to collapse
Just flash the stock rom via Odin.
abstra said:
Just flash the stock rom via Odin.
Click to expand...
Click to collapse
Yeah If I flash it back on Odin... Will it erase the data from the phone? As I'm not to sure!
Many thanks
If you use the CSC file (not HOME_CSC) it'll wipe all of your data, otherwise no.
abstra said:
If you use the CSC file (not HOME_CSC) it'll wipe all of your data, otherwise no.
Click to expand...
Click to collapse
I have tried this now and it hasn't work, it had failed to write, also the phone now has the following error message "an error has occurred while updating the device software, use the emergency recovery function via smart switch.
This is the log from odin
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin engine v(ID:3.1101)..
<ID:0/008> File analysis..
<ID:0/008> skip file list for home binary
<ID:0/008> param.bin
<ID:0/008> Home Binary Download
<ID:0/008> SetupConnection..
<ID:0/008> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
Install the samsung drivers again or try another USB port, I prefer to use USB 2.0 instead of 3.0 on Odin. And the error about smart switch explains itself, for that function you need to know model (SM-G935F/FD/W8 etc.) and S/N which stands at the rear side under the glass.
Edit: Misspell
abstra said:
Install the samsung drivers again or try another USB port, I prefer to use USB 2.0 instead of 3.0 on Odin. And the error about smart switch explains itself, for that function you need to know model (SM-G935F/FD/W8 etc.) and S/N which stands at the rear side under the glass.
Edit: Misspell
Click to expand...
Click to collapse
Tried the above, phone doesnt seem to turn off now, i can get into download mode!
Grr!
Try again, do you really think that "EMERGENCY RECOVERY" wants to destroy your phone?
Odin or Smart Switch can recover your phone unless you really damaged something with wrong flashing, like trying to flash CP as BL etc.
These methods always work.
abstra said:
Try again, do you really think that "EMERGENCY RECOVERY" wants to destroy your phone?
Odin or Smart Switch can recover your phone unless you really damaged something with wrong flashing, like trying to flash CP as BL etc.
These methods always work.
Click to expand...
Click to collapse
Thank you for reply buddy... Here is a new update from Odin
manged to get it into download mode, This is the log from odin
Removed!!
Added!!
Odin engine v(ID:3.1203)..
File analysis..
SetupConnection..
Initialzation..
Set PIT file..
DO NOT TURN OFF TARGET!!
Get PIT for mapping..
Firmware update start..
SingleDownload.
sboot.bin
param.bin
cm.bin
boot.img
recovery.img
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
I have done the following thing aswell, updated the Samsung drivers, changed USB ports, different dates of firmware.
the phone now doesnt turn off!!
Is flashing failed after recovery.img?
abstra said:
Is flashing failed after recovery.img?
Click to expand...
Click to collapse
Yes thats seems to be the case!
Here is a pic of the download mode.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Still no joy!! Really frustrating as the OS doesn't load up
Sent from my LG-H961N using Tapatalk
Hello guys.
My s8 sm-g950f was brought to me by my customer whom bought d phone, d customer told me, he mistakenly hard reset his device...Now the device is Requesting for Gmail, he said he had tried the email he think he sign in on d device. now device was now stuck in Activation screen...So i taught of bypass it by flashing combination file and stock rom... so i discovered d device was running lastest update BINARY 2 ...so i download COMBINATION FILE from Z3x server with my z3x box, i downloaded the combination file named(COMBINATION_FA70_G950FXXU2ARE1)
And i also downloaded the Stock Rom i needed from UPDATO named(G950FXXU2CRED)
Now after downloading the two files i needed, i flash the combination file as usual, d device boot and work fine with combination file, then i decided to flash my stock rom back to remove the FRP(how i flash the stock rom to remove d frp was == (i was flashing with z3x) Bl; i deselect some img file. Ap ;i select and flash Boot, recovery, system.. I didnt select Cp, but CSC(i use normal csc not home csc and i selected and flash only cache).
After doing of all this my device boot normal and told my data partition was corrupted , i should reset it, i reseted and i know d frp was still there and have not been removed
Then i started flashing combination and stock rom randomly trying to bypass the frp, trying different things, selecting and deselect when flashing combination and stock rom...all of a sudden was unable to flash anything, when i flash either stock rom/combination it fails instant in INITIALIZATION...
this is an image i took when trying to flash with Z3x lasted vs 33.2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i also tried using lastest Odin version but same error failing in INITIALIZATION...(i don have image for that, sorry)
Now the state of my device in Download mode
Now the state of my device is When i put it in download mode(note ;i can only boot to download only, i cant boot to recovery) and try to flash it either with Odin or Z3x box, it fails at INITIALIZATION... and device will start to reboot till battey drains
Here is a video of how it behaves
https://m.youtube.com/watch?v=maswhPWFnko
Guys i did some research and find out that Is OEM and RMM that is d cause why i cant flash anything... I believe Issue has given hard time working, i cant take off my eyes from it, it so challenging that why am asking for help cos is why pass my intellects...
Guys how do i Fix this Problem, any required information needed, am here to provide
Thanks friends for your Reply
sorry i posted d wrong video of how d device is acting...this is d right video
https://m.youtube.com/watch?v=7wO-UG_VzPM
Thanks Guys for your Reply
successnbd said:
sorry i posted d wrong video of how d device is acting...this is d right video
https://m.youtube.com/watch?v=7wO-UG_VzPM
Thanks Guys for your Reply
Click to expand...
Click to collapse
damn,
I have same problem with you.
keep failing on Odin even with the trick click start and 3 bottom at same time.
https://forum.xda-developers.com/galaxy-s8+/help/help-potential-softbrick-g955f-t3747425 read this carefully
Frp bypass fail
S8 SMg950f frp bypass
Successful flashed combination File
Problem in flashing stock rom
Odin log -home csc not work ing
<ID:0/015> Added!!
<ID:0/015> Removed!!
<ID:0/012> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/012> Odin engine v(ID:3.1301)..
<ID:0/012> File analysis..
<ID:0/012> skip file list for home binary
<ID:0/012> param.bin
<ID:0/012> userdata.img
<ID:0/012> Home Binary Download
<ID:0/012> Total Binary size: 3800 M
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> NAND Write Start!!
<ID:0/012> SingleDownload.
<ID:0/012> sboot.bin
<ID:0/012> up_param.bin
<ID:0/012> cm.bin
<ID:0/012> boot.img
<ID:0/012> recovery.img
<ID:0/012> system.img
<ID:0/012> modem.bin
<ID:0/012> Transmission Complete..
<ID:0/012> Now Writing.. Please wait about 2 minutes
<ID:0/012> Receive Response from boot-loader
<ID:0/012> modem_debug.bin
<ID:0/012> Transmission Complete..
<ID:0/012> Now Writing.. Please wait about 2 minutes
<ID:0/012> Receive Response from boot-loader
<ID:0/012> cache.img
<ID:0/012> hidden.img
<ID:0/012> RQT_CLOSE !!
<ID:0/012>
<ID:0/012> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Try to use patched odin
I used to flash phones a lot but our carrier is VZW so our phones have been locked for years and my skills are rusty
The phone is my wife's. It's stock on:
Release date: 04/03/2020
Android™ Security Patch Level: December 2019
Software Version: R16NW.G930VVRSBCTC1
The phone is bootlooping (I've already replaced it with a Pixel 4a) and I'm hoping to rescue it to use as a backup phone.
I downloaded this from Updato:
GALAXY S7 / SM-G930V
8.0.0 Oreo(Android ) /
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
February 25, 19
I see this on the phone:
SW REV CHECK FAIL : [aboot] Fused 11 > Binary 9
[1]eMMC write fail : aboot
In Odin I see this in the log:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 5238 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> emmc_appsboot.mbn
<ID:0/005> lksecapp.mbn
<ID:0/005> xbl.elf
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks for any advice - just trying to get the phone up and running stock
You're trying to flash firmware with Bootloader 9, but your current Bootloader is 11 (means you got last software upgrade and there's no chance to downgrade Bootloader)... This topic is discussed already several times. Wait for new exploit (if this someday will appear) for root for Bootloader 11
lim-popo said:
You're trying to flash firmware with Bootloader 9, but your current Bootloader is 11 (means you got last software upgrade and there's no chance to downgrade Bootloader)... This topic is discussed already several times. Wait for new exploit (if this someday will appear) for root for Bootloader 11
Click to expand...
Click to collapse
Hi - thanks for the reply - now I know what to read up on and that this phone is probably not going to see action again.
My hunch is that if it suddenly started doing this when nothing new has been installed for over a year that it's a hardware issue anyway.
dsteinschneider said:
Hi - thanks for the reply - now I know what to read up on and that this phone is probably not going to see action again.
My hunch is that if it suddenly started doing this when nothing new has been installed for over a year that it's a hardware issue anyway.
Click to expand...
Click to collapse
Then seems that your phone was arrived to you with latest firmware pre installed... But it's definitely an firmware issue, I have the same now in my hands , so I'm also waiting for the root.
P.S.
What's your issue??? I mean, why you want to downgrade???