Just Flash this CSC file in Odin to get full Volte India support on you G920F no root required.
https://mega.nz/#!VcM0yKJY!3MdMVCk_q9mC0DfSGww8Qfc8lk0gNI7O2zS7Nys3sDg
You can use your current rom but personally the France XEF ver. is working very good with Jio> Download Binary ver. select the BL , AP, CP from the XEF firmware and CSC from the above link.
https://www.sammobile.com/firmwares/download/121468/G920FXXU5DQA7_G920FOXA4DPGW_XEF/
Backup Data will be wiped
farookh said:
Just Flash this CSC file in Odin to get full Volte India support on you G920F no root required.
https://mega.nz/#!VcM0yKJY!3MdMVCk_q9mC0DfSGww8Qfc8lk0gNI7O2zS7Nys3sDg
You can use your current rom but personally the France XEF ver. is working very good with Jio> Download Binary ver. select the BL , AP, CP from the XEF firmware and CSC from the above link.
https://www.sammobile.com/firmwares/download/121468/G920FXXU5DQA7_G920FOXA4DPGW_XEF/
Backup Data will be wiped
Click to expand...
Click to collapse
Hey dude i tried but it didn't worked for me.
i have downloaded XEF version but it was a whole file not separate file like you said in OP. so i flashed it whole after phone boots up properly i again boot into download mode and flash the CSC file.
That didn't worked for me.
and yeah when i flash the chache. img file, it gets flashed properly and in phone it shows updating software but after 32% it stop showing exclamation sign with fallen android pic and it directly goes into into recovery in which there is written something about grace ux and it says permission denied.
Any help??
The exclamtion and reboot to recovery will only happen if you flash only the csc and not all separate files.
Thats ok if you check with samsung phoneinfo your csc has changed to INU and volte should work
farookh said:
The exclamtion and reboot to recovery will only happen if you flash only the csc and not all separate files.
Thats ok if you check with samsung phoneinfo your csc has changed to INU and volte should work
Click to expand...
Click to collapse
Yes it has changed to INU but still no voLTE. it just shows LTE instead of 4G.
mustakim_1994 said:
Yes it has changed to INU but still no voLTE. it just shows LTE instead of 4G.
Click to expand...
Click to collapse
bro here are some pics.. have a look
You product code has not changed from BTU to INU
Please use samfirmware soft to download XEF binary firmware and flash all files again.
farookh said:
You product code has not changed from BTU to INU
Please use samfirmware soft to download XEF binary firmware and flash all files again.
Click to expand...
Click to collapse
I have downloaded from updato.com as sammobile has very low download speed even on 4G.
And i forgot to say you that when i flashed XEF and CSC all my apps were intact and not even 1 app got deleted.
You need binary format separate bootloader pda modem and csc.
Use samfirm software select binary option
farookh said:
You need binary format separate bootloader pda modem and csc.
Use samfirm software select binary option
Click to expand...
Click to collapse
bro can you give me the link of binary version please
Please search samfirm xda in google u will get it
farookh said:
Please search samfirm xda in google u will get it
Click to expand...
Click to collapse
yeah bro.. i got it.. thanks..
now if i am not wrong i have to select binary nature check box.. correct...
farookh said:
Please search samfirm xda in google u will get it
Click to expand...
Click to collapse
Hey bro thanks a ton yaar.. seriously i had tried almost all the the thing on internet to enable voLTE but none of them worked but your method worked.
Thanks once again...
cheers....
Good to hear you got it working
voLTE in S6 but in 7.0
farookh said:
Good to hear you got it working
Click to expand...
Click to collapse
Assalam-u-alaikum bro
thnaks a ton.. because of your method voLTE got working in my S6 G920F. now is there any way you can workaround to make voLTE work in same France firmware(XEF) 7.0 nougat version, because i tried your method and it didn't worked.
Actually when i flash it stucks in last part in odin **meta-data/fota.zip**.
Is there any way?
Here you go INU csc for Nougat roms
https://mega.nz/#!pRth1JAI!Espv6tsNwXc1eFrQKEBnOAGdnL001yHFkZ4FNUA7j7Y
mustakim_1994 said:
Assalam-u-alaikum bro
thnaks a ton.. because of your method voLTE got working in my S6 G920F. now is there any way you can workaround to make voLTE work in same France firmware(XEF) 7.0 nougat version, because i tried your method and it didn't worked.
Actually when i flash it stucks in last part in odin **meta-data/fota.zip**.
Is there any way?
Click to expand...
Click to collapse
farookh said:
Here you go INU csc for Nougat roms
https://mega.nz/#!pRth1JAI!Espv6tsNwXc1eFrQKEBnOAGdnL001yHFkZ4FNUA7j7Y
Click to expand...
Click to collapse
jazzakallah bhai.
will flash it tonight and see if its working or not.
farookh said:
Here you go INU csc for Nougat roms
https://mega.nz/#!pRth1JAI!Espv6tsNwXc1eFrQKEBnOAGdnL001yHFkZ4FNUA7j7Y
Click to expand...
Click to collapse
Hi,
The link you provided is no longer working. Can you please any other link?
farookh said:
Here you go INU csc for Nougat roms
https://mega.nz/#!pRth1JAI!Espv6tsNwXc1eFrQKEBnOAGdnL001yHFkZ4FNUA7j7Y
Click to expand...
Click to collapse
Hey the link is broken can you please provide alternative.....also the exact steps whats to do...its all confusing to get what has to done from previous comments.
Thanks
This thread is closed please follow this thread
https://forum.xda-developers.com/galaxy-s6/general/guide-enable-volte-s6-sm-g920f-root-6-0-t3593938/post71976311#post71976311
farookh said:
You product code has not changed from BTU to INU
Please use samfirmware soft to download XEF binary firmware and flash all files again.
Click to expand...
Click to collapse
Hi..
My product code changed to INU.
And CSC too..but its still the same 4g icon ..anything else to do
:crying::crying::crying::crying:
Related
Hi,
Anyone pls help me. I need the official PDA, MODEM and CSC files for my Galaxy S. I tried flashing it and by mistake i chose wrong CSC and MODEM files. Since Froyo is officially launched in India, i want to install the official version through KIES. But I think i just messed up with the wrong files.
Pls help..
http://forum.xda-developers.com/showthread.php?t=846913
I referred to the same thread and flashed my SGS with this link
ASIA
I9000TGYJH1|2.1|2010 August|Download
Now the phone language is Chinese.! I think the MODEM and CSC files for India are different.
Pls help.
2.1 = Eclair anyway.. think the ones for India are in:
I9000DDJP6|2.2|2010 November
akhil7j said:
I referred to the same thread and flashed my SGS with this link
ASIA
I9000TGYJH1|2.1|2010 August|Download
Now the phone language is Chinese.! I think the MODEM and CSC files for India are different.
Pls help.
Click to expand...
Click to collapse
try to change csc from phone
type *#272*IMEI#
where imei is your imei code, from there select your csc, phone will reboot and make a factory reset.
Tried changing CSC from phone..
It says "UNKOWN APPLICATION" after entering the code.
Any help corgar?
Firmware version - 2.2
Baseband version - I9000DDJP2
Kernel version - 2.6.32.9 [email protected] #1
Build number - FROYO.DDJP6
i guess this is indian version of froyo
I9000DDJP6|2.2|2010 November|Download Link1 or Link2
but i can't check if it's a full package, if not you need to flash first another full rom like jm9 then upgrade to ddjp6
Thanks corgar,
I am downloading the same package. Lets see if it has the MODEM and CSC.
another way you can take is using kies registry hack here:
http://forum.xda-developers.com/showthread.php?t=835628
choose your csc and patch registry. After open kies and try to flash. But for me kies is evil i still prefer flashing via odin
after some searching product code for indian is I9000 [India] = GT-I9000HKAINU
you need to patch INU then.
hope this will help
Downloaded the I9000DDJP6 firmware but it doesn't have MODEM and CSC.
Downloaded the KIES Registry hack and Spoofed it to INU. Which you said is India.
Now KIES says Firmware upgrade is available. And its showing,
Latest Version: PDA:JP6 / PHONE:JP2 / CSC:JP5
Is it correct? Is this the one for India?
try to search in general section but i think it's the indian one.
Its kind of weird that i m spoofing KIES to India only and it says Update available and without spoofing it says no update. Kies is really evil...!
Checked in the general section. Its the same PDA:JP6 / PHONE:JP2 / CSC:JP5 for India.
Dont know why i cant update without Registry Hack.! Weird.
Thanks Corgor for your time and help.
Have a good day.!
akhil7j said:
Downloaded the I9000DDJP6 firmware but it doesn't have MODEM and CSC.
Downloaded the KIES Registry hack and Spoofed it to INU. Which you said is India.
Now KIES says Firmware upgrade is available. And its showing,
Latest Version: PDA:JP6 / PHONE:JP2 / CSC:JP5
Is it correct? Is this the one for India?
Click to expand...
Click to collapse
The one you downloadedis a single package if its named JP6_JP5_U_JP2.tar. You need to put in in PDA in Odin with re-partition checked & flash.
Thanks Ragin and Corgar, the issue is solved now. I m back on Froyo.
But the usual problem of SGS is not fixed. "Lagging"! Any help which lag fix i should install? I searched a got many results but since i am new in this, dont want to take risk again.
Thanks for the help..!
Search for a kernel and flash it as pda in odin. I'm on speedmod atm. Enter recovery and choose lagfix and tweaks.
Sent from my GT-I9000 using XDA App
akhil7j said:
Thanks Ragin and Corgar, the issue is solved now. I m back on Froyo.
But the usual problem of SGS is not fixed. "Lagging"! Any help which lag fix i should install? I searched a got many results but since i am new in this, dont want to take risk again.
Thanks for the help..!
Click to expand...
Click to collapse
Search for hardcore's speedmod kernel in DEV. download the latest stable Odin version. Put your phone into download mode & flash via Odin. Pull the battery, & go into recovery, & apply first the Tweaks. Reboot & check if you are satisfied with the snappiness/speed. I am sure you will be. If not, go into Recovery again & enable lagfix.
You can also try Trasig's kernel based on VooDoo.
This is a list of ODIN flashable stock ROMs. Uploading them to AFH and posting them here for faster download.
If you want your device on here, please give me the model number (SM-Txxx) and CSC you need. Thread will be updated when I have time.
ODIN - Used for flashing ODIN tar.md5 files to your device.
Odin3_v3.10.7.zip
Stock ROMs - These are UNmodified tar.md5 ROMs from Samsung.
SM-T710
5.0.2_T710XXU1AOG5_T710XAR1AOG6_XAR.zip
5.1.1_T710XXU1BOH7_T710XAR1BOH7_XAR.zip
SM-T810
5.0.2_T810XXU1AOG6_T810XAR1AOG6_XAR.zip
5.1.1_T810XXU1BOH7_T810XAR1BOH7_XAR.zip
SM-T815
T815XXU1AOGB_T815VFG1AOG3_VOD.zip
Please focus on T815 as well. Many of us would very appreciate.
Sent from my LG-H815 using Tapatalk
Kickoff said:
Please focus on T815 as well. Many of us would very appreciate.
Sent from my LG-H815 using Tapatalk
Click to expand...
Click to collapse
I will download what's out and start posting them :good:
When you download the file is a ZIP. I think I must decompress it in order to get the tar.md5 , right?
Which option must I select in Odin? AP with only REboot and Factory reset?
thanks!
Fis2 said:
When you download the file is a ZIP. I think I must decompress it in order to get the tar.md5 , right?
Which option must I select in Odin? AP with only REboot and Factory reset?
thanks!
Click to expand...
Click to collapse
Correct. Make sure you DO NOT check re-partition.
Bigbot, here's the latest AOI5 firmware for T815 from region DBT (Germany) mirrored to my Dropbox https://www.dropbox.com/s/felibhquhf8upzw/T815XXU1AOI5_T815OXA1AOI5_DBT.zip?dl=0
Feel free to mirror it to AndroidFileHost as I had issues uploading (upload speeds were slow for me) Thanks!
Sent from my SM-T800 using Tapatalk
DUHAsianSKILLZ said:
Bigbot, here's the latest AOI5 firmware for T815 from region DBT (Germany) mirrored to my Dropbox https://www.dropbox.com/s/felibhquhf8upzw/T815XXU1AOI5_T815OXA1AOI5_DBT.zip?dl=0
Feel free to mirror it to AndroidFileHost as I had issues uploading (upload speeds were slow for me) Thanks!
Sent from my SM-T800 using Tapatalk
Click to expand...
Click to collapse
I'll download it later today and update when it's done :good: thanks
Reflashing
Hi,
I will reflash factory Firmware, i have rottet and have custom recovery. I already have download Firmware and odin can somebody explain me please hove to do it i will be greatfull thanks everybody :good:
I understand that these are stock roms, curious if non-stock roms like CM12 and similar will ever make their way over? My OR rom is awesome, I'm just one of those fools that's constantly customizing for the fun of it.
keyapira said:
Hi,
I will reflash factory Firmware, i have rottet and have custom recovery. I already have download Firmware and odin can somebody explain me please hove to do it i will be greatfull thanks everybody :good:
Click to expand...
Click to collapse
Google is your friend...
http://forums.androidcentral.com/am...w-flash-stock-rom-via-odin-new-interface.html
http://www.droidviews.com/install-stock-firmware-on-samsung-galaxy-devices-using-odin/
Flash at your own risk.
Hello
Rooting my device voids the warranty, but if I have any problems with my device and need support ... Can I flash the stock ROM and take it to customer support?
Without them finding out?
Sent from my SM-T710 using Tapatalk
mrch0x said:
Hello
Rooting my device voids the warranty, but if I have any problems with my device and need support ... Can I flash the stock ROM and take it to customer support?
Without them finding out?
Sent from my SM-T710 using Tapatalk
Click to expand...
Click to collapse
No. You can reinstall stock ROM and have the tablet working as before, but after installing anything custom the efuse will be blown. This means that it can always be detected that custom firmware/kernels/recovery/root/etc have at one point been installed. It also means security containers like Knox will refuse to operate.
I tried out the October (J) release for T815 which has been released for DBT (Germany) and a few other places. (link here). PDA version: T815XXU2AOJ4. Included CSCs: BTU (UK), DBT (Germany), ITV (Italy), XEF (France), XEO (Poland). Android 5.0.2. Previously I had the latest release for PHN (Netherlands), which is still T815XXU1AOG9.
Stagefright bug fixed according to Lookout. Not fixed according to Trustable.
New app icons
Still no multi-user
For DBT, there are four German bloatware apps included. All four can be uninstalled without root.
No Camera2 API
Dialer doesn't accept the secret codes like *#06#, *#0*#, *#1234#
Weird display behaviour (flashing, freezing) at very low battery percentages
Warning: you can not fully downgrade from this version "2" firmware to the version "1" firmwares we had until now! You can partially downgrade if you leave the bootloader and the modem as is (so downgrade only PDA and CSC).
This is great. Any chance that someone has the Stock ROM for the SM-T817V? Or does the firmware for the T815 work on this device?
The October T815XXU2AOJ4 version is now also out for T815 in the Netherlands (PHN), which is bloatfree. No other CSCs included. Link here. The dialer accepts the secret codes like "*#1234#" again. Otherwise the experience is the same. Again, you can't downgrade from this version.
Can the 5.1.1 update be flashed on any SM-T810?
I purchased one in Australia and when I tried to follow the instructions and flash with ODIN I get an error SW REV CHECK FAIL DEVICE when using 5.1.1_T810XXU1BOH7_T810XAR1BOH7_XAR.zip
I had and un-rooted device, which just received an update (11/03) to version LMY47X.T710XXU2BOJ1. I ended up rooting and flashing TWRP on it, but I'm having an issue writing to my external SD card. Is there something I can flash to fix this?
Thanks
edit: Google was my friend - manually updated platform.xml.
dnydny said:
Can the 5.1.1 update be flashed on any SM-T810?
I purchased one in Australia and when I tried to follow the instructions and flash with ODIN I get an error SW REV CHECK FAIL DEVICE when using 5.1.1_T810XXU1BOH7_T810XAR1BOH7_XAR.zip
Click to expand...
Click to collapse
The T810XXU1BOH7 firmware is very old (H = August I think). Apparently for your device it constitutes a downgrade, which it doesn't allow. Download the most recent firmware to flash. If e.g. you currently have firmware with a "2A" (5.0.2) on your device, you can't flash this "1B" (5.1.1) firmware even though it seems like an upgrade of android, because it is a downgrade of the bootloader. Download firmware with "2B" (5.1.1) in the name and I think it may work.
I don't have the T810, but T815 which is still stuck at 5.0.2...
Is it possible to flash a T710 firmware onto a T715 device? I don't need LTE at all so I don't mind losing it (I have no SIM). I just want to get faster updates because I need multi-user support from 5.1.1.
GidiK said:
The T810XXU1BOH7 firmware is very old (H = August I think). Apparently for your device it constitutes a downgrade, which it doesn't allow. Download the most recent firmware to flash. If e.g. you currently have firmware with a "2A" (5.0.2) on your device, you can't flash this "1B" (5.1.1) firmware even though it seems like an upgrade of android, because it is a downgrade of the bootloader. Download firmware with "2B" (5.1.1) in the name and I think it may work.
I don't have the T810, but T815 which is still stuck at 5.0.2...
Click to expand...
Click to collapse
Thanks! Thats really handy to know. I'll give XAC-T810XXU2BOJ1 a shot and see how that goes.
I'd like to change the CSC of my phone to a different one. Could I just flash the BTU image via ODIN? What should I do?
I do not have root.
zurih said:
I'd like to change the CSC of my phone to a different one. Could I just flash the BTU image via ODIN? What should I do?
I do not have root.
Click to expand...
Click to collapse
Download the latest BTU-firmware from i.e. SamMobile
1. Install Odin 3.10.7
2. Put AP BL CP CSC in the designated slots (your device will be resetted afterwards)
If you reflash the current AP + BL + CP BUT use the Home-CSC version the device will not reset data.
Brotuck said:
If you reflash the current AP + BL + CP BUT use the Home-CSC version the device will not reset data.
Click to expand...
Click to collapse
Where I download the current BL + CP?
zurih said:
Where I download the current AP + BL + CP?
Click to expand...
Click to collapse
You can use the firmware the henklbr posted and use the home-csc from the country u want.
I did this on a BTU csc and went to the PHN csc without erasing anything.
http://forum.xda-developers.com/s7-edge/how-to/official-stock-firmware-update-odin-t3335065
Do make sure you backup the data, because it is not 100% guaranteed..
Brotuck said:
You can use the firmware the henklbr posted and use the home-csc from the country u want.
I did this on a BTU csc and went to the PHN csc without erasing anything.
http://forum.xda-developers.com/s7-edge/how-to/official-stock-firmware-update-odin-t3335065
Do make sure you backup the data, because it is not 100% guaranteed..
Click to expand...
Click to collapse
Why PHN, is it any better?
zurih said:
Why PHN, is it any better?
Click to expand...
Click to collapse
PHN is from my own country, it holds carrier specific stuff.
Basically you can use any CSC you want, but some CSC versions also install extra software at first boot.
Brotuck said:
PHN is from my own country, it holds carrier specific stuff.
Basically you can use any CSC you want, but some CSC versions also install extra software at first boot.
Click to expand...
Click to collapse
I bought my S7E from eBay and the CSC is THR (Iran).
Is there any reason I should change the CSC? What do you recommend? BTU or NEE? Any other?
Thank you!
zurih said:
I bought my S7E from eBay and the CSC is THR (Iran).
Is there any reason I should change the CSC? What do you recommend? BTU or NEE? Any other?
Thank you!
Click to expand...
Click to collapse
If the phone works fine now i would not change anything.
If you are a flashaholic then use the latest and greatest from the link i posted.
If you just want automatic updates on a regular basis via OTA then flash BTU, chances are that this firmware will be updated quicker.
Brotuck said:
If the phone works fine now i would not change anything.
If you are a flashaholic then use the latest and greatest from the link i posted.
If you just want automatic updates on a regular basis via OTA then flash BTU, chances are that this firmware will be updated quicker.
Click to expand...
Click to collapse
I just want OTAs.
If BTU has G935FXXU1APD3 and THR has G935FXXU1APD1 does it mean the BTU version has a newer version?
zurih said:
I just want OTAs.
If BTU has G935FXXU1APD3 and THR has G935FXXU1APD1 does it mean the BTU version has a newer version?
Click to expand...
Click to collapse
In that case you must flash the stock image from BTU.
That firmware can be easily found.
But keep in mind that this will reset the phone !!!
Model SM-G935F
Model name Galaxy S7 edge
Country United Kingdom
Version Android 6.0.1
Changelist 110166628
Build date Thu, 07 Apr 2016 09:48:03 +0000
Product code BTU
PDA G935FXXU1APD3
CSC G935FBTU1APD3
Brotuck said:
In that case you must flash the stock image from BTU.
That firmware can be easily found.
But keep in mind that this will reset the phone !!!
Model SM-G935F
Model name Galaxy S7 edge
Country United Kingdom
Version Android 6.0.1
Changelist 110166628
Build date Thu, 07 Apr 2016 09:48:03 +0000
Product code BTU
PDA G935FXXU1APD3
CSC G935FBTU1APD3
Click to expand...
Click to collapse
So the steps I need to do in order to prevent data loss is flashing the BTU image with Odin, when flash the CSVS files with the instructuons in the tread you attach above?
Brotuck said:
In that case you must flash the stock image from BTU.
That firmware can be easily found.
But keep in mind that this will reset the phone !!!
Model SM-G935F
Model name Galaxy S7 edge
Country United Kingdom
Version Android 6.0.1
Changelist 110166628
Build date Thu, 07 Apr 2016 09:48:03 +0000
Product code BTU
PDA G935FXXU1APD3
CSC G935FBTU1APD3
Click to expand...
Click to collapse
Can I ask why it will reset the phone? If I flash from current version APD1 from THR to APD3 from BTU via ODIN, will it reset my data?
zurih said:
Can I ask why it will reset the phone? If I flash from current version APD1 from THR to APD3 from BTU via ODIN, will it reset my data?
Click to expand...
Click to collapse
If you want OTA then you need to setup the phone with all stock firmware.
So you need to use the CSC file and NOT the Home_CSC file.
When using the normal CSC file, the script in the CSC formats data on your phone. (factory reset)
Sure you can use Home_CSC but then you will not get OTA files, or when you get them they will fail when installing.
Brotuck said:
If you want OTA then you need to setup the phone with all stock firmware.
So you need to use the CSC file and NOT the Home_CSC file.
When using the normal CSC file, the script in the CSC formats data on your phone. (factory reset)
Sure you can use Home_CSC but then you will not get OTA files, or when you get them they will fail when installing.
Click to expand...
Click to collapse
So you're saying if I put HOME_CSC, OTA will not work, so I MUST use original CSC file and format my data if I want to get OTAs?
No way around this without losing my data? It's a pain in the a** to format everything...
zurih said:
So you're saying if I put HOME_CSC, OTA will not work, so I MUST use original CSC file and format my data if I want to get OTAs?
No way around this without losing my data? It's a pain in the a** to format everything...
Click to expand...
Click to collapse
yes no way around this. sorry
Brotuck said:
If you want OTA then you need to setup the phone with all stock firmware.
So you need to use the CSC file and NOT the Home_CSC file.
When using the normal CSC file, the script in the CSC formats data on your phone. (factory reset)
Sure you can use Home_CSC but then you will not get OTA files, or when you get them they will fail when installing.
Click to expand...
Click to collapse
Brotuck, thank you very much for all your posts here. They have been very useful for me! I bought a Galaxy S7 online for quite a good price. Phone has worked well with no issues apart from one! Which was that it would not upgrade to the latest firmware for the S7 from Samsung: G930FXXU1APD3. My phone had the upgrade ending in APD1. I did some investigation using PhoneINFO app from the Play store and turns out my phone CSC code was TRI and BGY which are Vietnam and Hong Kong! Turns out my phone is a grey market phone as I am in the UK.
I wanted APD3 because I am in the UK with the EE network which provides WiFi calling which I wanted for my my phone as I work in a building which has very poor reception but has WiFi. I read the APD3 version allows for WiFi calling. I called all the Samsung helplines to get my phone upgraded but no luck. Eventually I thought to go the DIY route and found this thread! I was quite wary of downloading and updating my phone using the Odin method and thought long and hard several times fearing I would brick my phone! However last night I bit the bullet and updated!! You will be happy to know thanks to this thread, and various others I Googled, the phone upgraded with no issues (so far!). I can now see the WiFi toggle in the Phone settings!!! I used the full csc code and not the Home code and so had to add all my stuff back on the phone again but that was not too bad as I had backed up my phone using Smart Switch.
I have just one question though: My phone now shows Bootloader, PDA and CSC versions as G930FXXU1APD3 but the Baseband version is still showing: G930FXXU1APD1. Is this correct. Does the Baseband version not update with the latest firmware?
Many thanks again.
Best CSC for VOLTE - VIDEO CALLING - ATT
I am on ATT Network using the G935F - and I am curious if there is a CSC I can flash that would enable me to take advantatage of ATT VOLTE and VIdeo Calling from the main phone dialer apk?
I know I can use hangouts - but it would be simpler to use the regular dialer and I really would like the benefits of VOLTE if I can get them....
I understand that not all providers or all areas offer VOLTE or Native Video Calling for that matter but I beleive that some do - I Just don't knwo which ones?
Any suggestions?
SF101 said:
Brotuck, thank you very much for all your posts here. They have been very useful for me! I bought a Galaxy S7 online for quite a good price. Phone has worked well with no issues apart from one! Which was that it would not upgrade to the latest firmware for the S7 from Samsung: G930FXXU1APD3. My phone had the upgrade ending in APD1. I did some investigation using PhoneINFO app from the Play store and turns out my phone CSC code was TRI and BGY which are Vietnam and Hong Kong! Turns out my phone is a grey market phone as I am in the UK.
I wanted APD3 because I am in the UK with the EE network which provides WiFi calling which I wanted for my my phone as I work in a building which has very poor reception but has WiFi. I read the APD3 version allows for WiFi calling. I called all the Samsung helplines to get my phone upgraded but no luck. Eventually I thought to go the DIY route and found this thread! I was quite wary of downloading and updating my phone using the Odin method and thought long and hard several times fearing I would brick my phone! However last night I bit the bullet and updated!! You will be happy to know thanks to this thread, and various others I Googled, the phone upgraded with no issues (so far!). I can now see the WiFi toggle in the Phone settings!!! I used the full csc code and not the Home code and so had to add all my stuff back on the phone again but that was not too bad as I had backed up my phone using Smart Switch.
I have just one question though: My phone now shows Bootloader, PDA and CSC versions as G930FXXU1APD3 but the Baseband version is still showing: G930FXXU1APD1. Is this correct. Does the Baseband version not update with the latest firmware?
Many thanks again.
Click to expand...
Click to collapse
It really depends on the used firmware you installed. It is very possible that PD1 is the baseband version.
Don't worry about it. If it all works fine, do not mess with it.
Change CSC make service codes (i.e. *#0*#) impossible to use.
hello, i am from India. I recently bought a new Samsung Galaxy S7 Edge Duos. FEW DAYS AGO (ABOUT 2-3 DAYS) i updated it to latest version over OTA. I tried to root it by CF Auto root but something broke and it transferred my device in bootloop so i downloaded and flashed a stock rom G935FXXU1APB6_G935FOLB1APB6_XSP_FULL using Odin. My device started but i figured out that the rom is Singaporian version and its a March upgrade and i could not update it also. I am also having wifi connectivity issues. My old rom was perfect. It was preinstalled by Company. Please help me or please give me a link of my model's official stock rom rather than Sammobile ( i tried sammobile but my connection refuses and also speed too low )
UPDATE: Also my carrier works.......
PLzzzzzz Help......
Device specifications
Model Number SM-G935FD
BASEBAND VERSION G935FXXU1APEQ
BUILD NUMBER MMB29K.G935FXXU1APB6
gurpreet4u15 said:
hello, i am from India. I recently bought a new Samsung Galaxy S7 Edge Duos. FEW DAYS AGO (ABOUT 2-3 DAYS) i updated it to latest version over OTA. I tried to root it by CF Auto root but something broke and it transferred my device in bootloop so i downloaded and flashed a stock rom G935FXXU1APB6_G935FOLB1APB6_XSP_FULL using Odin. My device started but i figured out that the rom is Singaporian version and its a March upgrade and i could not update it also. I am also having wifi connectivity issues. My old rom was perfect. It was preinstalled by Company. Please help me or please give me a link of my model's official stock rom rather than Sammobile ( i tried sammobile but my connection refuses and also speed too low )
UPDATE: Also my carrier works.......
PLzzzzzz Help......
Device specifications
Model Number SM-G935FD
BASEBAND VERSION G935FXXU1APEQ
BUILD NUMBER MMB29K.G935FXXU1APB6
Click to expand...
Click to collapse
Download this and Flash I was on latest version rooted flashed this and got all the latest updates..
PS : I am using s7 Edge SM-G935FD
[email protected] said:
Download this and Flash I was on latest version rooted flashed this and got all the latest updates..
PS : I am using s7 Edge SM-G935FD
Click to expand...
Click to collapse
Tx vry much for help but can you give a link rather than sammobile
gurpreet4u15 said:
hello, i am from India. I recently bought a new Samsung Galaxy S7 Edge Duos. FEW DAYS AGO (ABOUT 2-3 DAYS) i updated it to latest version over OTA. I tried to root it by CF Auto root but something broke and it transferred my device in bootloop so i downloaded and flashed a stock rom G935FXXU1APB6_G935FOLB1APB6_XSP_FULL using Odin. My device started but i figured out that the rom is Singaporian version and its a March upgrade and i could not update it also. I am also having wifi connectivity issues. My old rom was perfect. It was preinstalled by Company. Please help me or please give me a link of my model's official stock rom rather than Sammobile ( i tried sammobile but my connection refuses and also speed too low )
UPDATE: Also my carrier works.......
PLzzzzzz Help......
Device specifications
Model Number SM-G935FD
BASEBAND VERSION G935FXXU1APEQ
BUILD NUMBER MMB29K.G935FXXU1APB6
Click to expand...
Click to collapse
Did the 935F rom worked perfectly? Please upload your about phone screenshot
Dewang rocky said:
Did the 935F rom worked perfectly? Please upload your about phone screenshot
Click to expand...
Click to collapse
Here's the screenshots.....
Plzz help
gurpreet4u15 said:
Tx vry much for help but can you give a link rather than sammobile
Click to expand...
Click to collapse
Sorry I don't have any other link
[email protected] said:
Sorry I don't have any other link
Click to expand...
Click to collapse
It's ok dude atleast you helped
gurpreet4u15 said:
i downloaded and flashed a stock rom G935FXXU1APB6_G935FOLB1APB6_XSP_FULL using Odin.
Click to expand...
Click to collapse
A bit silly question but have you tried installing from Smart Switch? You mentioned Odin so that didn't look promising...
Try recovery from Smart Switch.
gurpreet4u15 said:
Here's the screenshots.....
Plzz help
Click to expand...
Click to collapse
I have 935FD i havr still not tried 935F rom on it,but seems like you have flashed FD in your S7 edge
Dewang rocky said:
I have 935FD i havr still not tried 935F rom on it,but seems like you have flashed FD in your S7 edge
Click to expand...
Click to collapse
Official ROMs for F & FD models are same...
p2kin said:
Official ROMs for F & FD models are same...
Click to expand...
Click to collapse
Oh thanks,am planning to flash afgan F on my indian FD
I did it on G935FD UAE version. I flashed with G935F UK version, alll is perfect!
troxter said:
I did it on G935FD UAE version. I flashed with G935F UK version, alll is perfect!
Click to expand...
Click to collapse
can you guide me on step to flash? did you do a factory reset before/after flashing? thanks
madkhaz said:
can you guide me on step to flash? did you do a factory reset before/after flashing? thanks
Click to expand...
Click to collapse
Download and install USB drivers for Samsung Galaxy S7 edge in your computer.
Make sure to take backup of any important files on your smartphone.
Enable USB debugging option by pressing Menu > Settings > Applications. Navigate and tap on Developer Options to ensure that USB Debugging is enabled.
Ensure that your Galaxy S7 edge carries more than 70% of charge.
Highly Credible Leak Points At Early Samsung Galaxy S7 Launch Date
Unzip Odin on your computer and install it.
Unzip firmware zip file in the same folder as Odin.
Switch your Samsung Galaxy S7 edge off and boot it in Download mode: press and hold Volume Down and Power together and then press the Home key. OR, check how to enter Download Mode.
Open Odin and connect your smartphone with your computer. When connected successfully, one of the ID:COM boxes will turn yellow with the COM port number after a while. (In case you don’t get it, try another USB port. If that doesn’t help either, then re-install USB drivers).
On your Odin, select files:
Click on AP and select file with AP in its name.
Click on CP and select file with MODEM in its name – ignore if you didn’t get any such file.
Click on CSC and select file with CSC in its name – ignore if you didn’t get any such file.
Click on PIT and select the. pit file – ignore if you didn’t get any such file.
Click on BL and select file with BL in its name – ignore if there is no such file.
Make sure to check Auto Reboot and F.Rest Time. Check Re-Partition only if you selected the. pit file.
Click on Start to initiate the update process.
When Android 6.0.1 Marshmallow update installation is successfully completed, you will get a PASS message.
I don't know if factory reset is necessary after flash, but I did it, just in case. I attached Odin which I used.
p2kin said:
A bit silly question but have you tried installing from Smart Switch? You mentioned Odin so that didn't look promising...
Try recovery from Smart Switch.
Click to expand...
Click to collapse
What's the difference ??
gurpreet4u15 said:
What's the difference ??
Click to expand...
Click to collapse
Unless you know what you are doing and about files source/files you are flashing, then not much.. but if you are not sure, then Smart Switch can download official f/w for your specific model & flash it for you.. simplest, no brainer to recover to official f/w.
p2kin said:
Unless you know what you are doing and about files source/files you are flashing, then not much.. but if you are not sure, then Smart Switch can download official f/w for your specific model & flash it for you.. simplest, no brainer to recover to official f/w.
Click to expand...
Click to collapse
Okk Tx dude......
Official Android 7.0
Hi
I have G935FD device, which I recently bought (the second hand one).
I notice that I have issue with GPRS data transfer... it looks like, from time to time when GPRS is active SMS sending is not possible any more (up to next power OFF of device) .
At that time I'm able to see only one GPRS range indicator.
I'm able to receive calls from both SIM cards.
I did not check am I able to call from both of them.
According to my google investigations issue is pressent in Android 6.0, which I have right now.
Case shall be easy, I need to update to Nugat verision and it is all , but...
1) If I'll check firmware update on my mobile I have inforamtion that it is the latest version of firmware G935FXXU1APD1// G935FXXU1APB6. what is not true
2) I started to looking for official Android 7.0 version. to get it, I have to have CSC code. Phone info application have cleared out all CSC code. *#1234# don't work - "error message connection error or wrong MMI code".
Device type is hero2lte
Product name is hero2ltexx
Product code is SM-G935FZSU - this looks like oryginal information .
Bootloader : G935FXXU1APB6
PDA Version: G935FXXU1APD1
Baseband Version" G935FXXU1APB6
CSC Version :
Kernel Version
3.18.14-7538748
[email protected]#1
64-bit
knox warrantz void: 0x0
Does any one know what can be the oryginal CSC code for such device?
Can you tell me where can I find oryginal Android 7.0 which will works fine in Poland ?
Thanks in advance.
Hi
Below information for anyone who have the same issue as I.
I download the newest official ROM for Android 7.0 for Poland (G935FXXS1DQHI).
I used ROM for single sim, not dual sim.
Since that I don't have any issue with SMS or GPRS any more.
MMI codes started to work back.
I still have dual sim .
Simple , now it works better !!
I got a used GT-935T phone very recently in India, which was still running android 6.0. On browsing these forums, I found out that we could flash stock rom on it without rooting, so I did so using Odin. I flashed the stock rom of Android 7.0 for t-mobile 935T, which was what my phone was supposed to be.
On further browsing, I also discovered, that we could flash any stock rom on the phone, irrespective of the region. So I decided to download the latest stock rom for India 935fd. I did so, but whenever I'm trying to flash it using Odin, I'm getting an error - repartition failed.
I've not checkd the repartition option.
can someone help me?
Hi.
I am using 935F single sim THL csc mobile
I want to change it to IND csc.
Is their any possible solution.
I need voWifi its only available in indian csc.
Also i am staying in india.
My present mobile details are as below.
Product Code: SM-G935FZKAINS
PDA: G935FXXS8ETC7
CSC: G930FODD5ESE1
Baseband: G935FXXS8ETC7
Bootloader: G935FXXS8ETC7
Single sim 935F. Android version 8.0.0
Hi all
I am a guy from Spain and I am using Google translator, I hope all understand all me well.
I have an S8+ updated to Android Pie and after testing it several days I did not like it.
I tried to install Oreo using Odin but it gives me an error.
Searching for information, I found I can not do downgrade because of a binary boot number.
is there another method to install stock Oreo rom? Could it by root?
I never performed root, i'm noob.
I would appreciate any help. Thanks and best regards
VanderMirch said:
Hi all
I am a guy from Spain and I am using Google translator, I hope all understand all me well.
I have an S8+ updated to Android Pie and after testing it several days I did not like it.
I tried to install Oreo using Odin but it gives me an error.
Searching for information, I found I can not do downgrade because of a binary boot number.
is there another method to install stock Oreo rom? Could it by root?
I never performed root, i'm noob.
I would appreciate any help. Thanks and best regards
Click to expand...
Click to collapse
Do you have the newest Odin version?
Have you ever tried it on another computer?
Have you ever tried it with a 4tlg.Firmware? (Download with SamFirm)
bininga59 said:
Do you have the newest Odin version?
Have you ever tried it on another computer?
Have you ever tried it with a 4tlg.Firmware? (Download with SamFirm)
Click to expand...
Click to collapse
Hi.
Yes, the latest version of Odin: Odin3-v3.13.1
Yes, 1 pc with Windows 7 and another with Windows 10.
I've never tried a 4tlg.Firmware, I do not even know what it is.
As I commented in the messenge I read that odin can not be downgrade because it changes a binary number of the boot between Pie and Oreo ¿not? (or something like that happens).
Thank you very much for the reply.
VanderMirch said:
Hi.
Yes, the latest version of Odin: Odin3-v3.13.1
Yes, 1 pc with Windows 7 and another with Windows 10.
I've never tried a 4tlg.Firmware, I do not even know what it is.
As I commented in the messenge I read that odin can not be downgrade because it changes a binary number of the boot between Pie and Oreo ¿not? (or something like that happens).
Thank you very much for the reply.
Click to expand...
Click to collapse
Example picture for the download of a 4tlg.Firmware
bininga59 said:
Example picture for the download of a 4tlg.Firmware
Click to expand...
Click to collapse
Downloading the firmware, when are you downloaded what should I do? Is that firm Pie not?
Previously I tried to install by Odin the latest Oreo firmware para mi S8+ downloaded from Sammobile and alwais error.
Thanks.
VanderMirch said:
Downloading the firmware, when are you downloaded what should I do? Is that firm Pie not?
Previously I tried to install by Odin the latest Oreo firmware para mi S8+ downloaded from Sammobile and alwais error.
Thanks.
Click to expand...
Click to collapse
You look at Sammobile which version it is
9 = pie
8 = Oreo
bininga59 said:
You look at Sammobile which version it is
9 = pie
8 = Oreo
Click to expand...
Click to collapse
9 = pie
https://www.sammobile.com/firmwares/galaxy-s8-plus/SM-G955F/PHE/download/G955FXXS4DSC2/262051/
VanderMirch said:
9 = pie
https://www.sammobile.com/firmwares/galaxy-s8-plus/SM-G955F/PHE/download/G955FXXS4DSC2/262051/
Click to expand...
Click to collapse
Yes, G955FXXS4DSC2 = Pie
bininga59 said:
Yes, G955FXXS4DSC2 = Pie
Click to expand...
Click to collapse
Is it valid to downgrade Oreo?
VanderMirch said:
Is it valid to downgrade Oreo?
Click to expand...
Click to collapse
Who has something against it?
bininga59 said:
Who has something against it?
Click to expand...
Click to collapse
I do not understand you, sorry
VanderMirch said:
I do not understand you, sorry
Click to expand...
Click to collapse
You asked, Is it valid to downgrade Oreo?
I do not mind
Can someone help me please?
VanderMirch said:
Can someone help me please?
Click to expand...
Click to collapse
In the firmware name you download the binary number ( bootloader version ) is the fifth (5) number from the right. In your case 4 is your binary number.
Eg: G955FXXS4CRLB - 4 is the binary(bootloader) number. You can only flash version 4 or higher not 3 or lower.
Download firmware from.sammobil or.updato
Eg: G955FXXS4CSB1 ( PHE ) is Oreo Feb release.
Don't know if your on carrier firmware or not?
Unzip downloaded firmware using 7zip,WinRAR or any zip program that supports lz4 compression ratio. There will be 5 files.
Note: It is recommended to a clean install when downgrading so do a backup first.
1. In Odin from the extracted files place:
BL in BL section
CP in CP section
AP in AP section
CSC in CSC section - use the CSC file not the Home CSC file. This will do a clean install same as a factory reset.Wait for Odin to load files
2. Put phone in download mode and connect to PC
3. When Odin see's the phone then hit the start button.
4. When finished phone should reboot then run through the setup and restore your backups.
spawnlives said:
In the firmware name you download the binary number ( bootloader version ) is the fifth (5) number from the right. In your case 4 is your binary number.
Eg: G955FXXS4CRLB - 4 is the binary(bootloader) number. You can only flash version 4 or higher not 3 or lower.
Download firmware from.sammobil or.updato
Eg: G955FXXS4CSB1 ( PHE ) is Oreo Feb release.
Don't know if your on carrier firmware or not?
Unzip downloaded firmware using 7zip,WinRAR or any zip program that supports lz4 compression ratio. There will be 5 files.
Note: It is recommended to a clean install when downgrading so do a backup first.
1. In Odin from the extracted files place:
BL in BL section
CP in CP section
AP in AP section
CSC in CSC section - use the CSC file not the Home CSC file. This will do a clean install same as a factory reset.Wait for Odin to load files
2. Put phone in download mode and connect to PC
3. When Odin see's the phone then hit the start button.
4. When finished phone should reboot then run through the setup and restore your backups.
Click to expand...
Click to collapse
It has worked! Yeah! It was as you explained.
The problem I had was that I was getting a firmware with the binary number 3 because it was the last one in SamMobile for the normal S8 + (SM-G955F), to download the one you put me in, I searched for the S8 + dual sim (SM- G955FD).
Updato has very slow downloads, three days to download the firmware.
¡I thank you very much for the help! Without you I would not have achieved it.
:good::good: :highfive:
please tell..
VanderMirch said:
It has worked! Yeah! It was as you explained.
The problem I had was that I was getting a firmware with the binary number 3 because it was the last one in SamMobile for the normal S8 + (SM-G955F), to download the one you put me in, I searched for the S8 + dual sim (SM- G955FD).
Updato has very slow downloads, three days to download the firmware.
¡I thank you very much for the help! Without you I would not have achieved it.
:good::good: :highfive:
Click to expand...
Click to collapse
Hello bro , I read your all posts, I also want to roll back I also know every steps, but now I want to hear from you " If all the apps working Ok ?? Like samsung pay and samsung health etc. ?? KNOX is 0*0 or 0*1 ??
jayeshbsoni said:
Hello bro , I read your all posts, I also want to roll back I also know every steps, but now I want to hear from you " If all the apps working Ok ?? Like samsung pay and samsung health etc. ?? KNOX is 0*0 or 0*1 ??
Click to expand...
Click to collapse
Hi bro.
Yes, all apps work correctly: Samsung Pay and samsung health perfectly and all the others.
My case is with Spain PHE firmware.
The Knox is 0 * 0, using official stock firmwares the Knox never rises.
After returning to Oreo, remember to freeze the software update process so that it does not search or update again to Pie. You have to do it by adb
If you continue with doubts, you ask me
And the files downloaded from Updato and Sanmobile are stock? I have S8 and want to downgrade from Pie to Oreo, I have G950FXXS5DSF1 bootloader 5, the oreo files are with bootloader 4 (not 100%), can I do this downgrade? or it will get bricked? knox tripped?
rilley said:
And the files downloaded from Updato and Sanmobile are stock? I have S8 and want to downgrade from Pie to Oreo, I have G950FXXS5DSF1 bootloader 5, the oreo files are with bootloader 4 (not 100%), can I do this downgrade? or it will get bricked? knox tripped?
Click to expand...
Click to collapse
Hello.
I'm afraid you can not download the version because it's a 5 and Oreo only has up to 4.
Maybe I can install a version of Pie 4 and then download it to Oreo 4, but I'm not sure about it.
Hi, did you make it? Did it help?