Stucking on welcome screen after upgrading to 7.1.1 - Zuk Z1 Q&A, Help & Troubleshooting

Hey everyone....... I need some help......i am using zuk z1 running on mokee 6.0.1 latest release version...now the problem i am facing is when i am trying to upgrade my phone to lineageOS 7.1.1 or mokee 7.1.1 , i got stuck into welcome screen or language selection screen...my screen doesn't respond...even i restart my phone but of no use
I am not even mistaking anywhere ie i am wiping cache dalvik data etc etc also i am using right version of gapps ....also my twrp version is 3.0.20....plzzzz help me

singh.9yashpal9 said:
Hey everyone....... I need some help......i am using zuk z1 running on mokee 6.0.1 latest release version...now the problem i am facing is when i am trying to upgrade my phone to lineageOS 7.1.1 or mokee 7.1.1 , i got stuck into welcome screen or language selection screen...my screen doesn't respond...even i restart my phone but of no use
I am not even mistaking anywhere ie i am wiping cache dalvik data etc etc also i am using right version of gapps ....also my twrp version is 3.0.20....plzzzz help me
Click to expand...
Click to collapse
You wiped system too?

Yes sir...everything...except internal storage

Related

If Anyone Need Help I Help Here

You Can Ask Help Here
Send From My SM-G900F Using XDA-Developers Mobile App
Recently updated my old Nexus 10/Manta to OmniROM 6.0.1 and I couldn't be happier. I had a fair bit of messing around on the first try until I got the sequence right...full wipe, flash ROM, flash Gapps pico and everything works REALLY well.
However, installing nightly updates is the same for me as the initial flash...I have to do a full wipe or I get the Google Services loop.
Am i doing something wrong is that how nightlies work currently?
Thanks.
Omnirom 5.1.1 on Nexus7, i can't use any of custom kernel. The installation work fine but after reboot the kernel is not install.
Thanks
Sent from my Nexus 7 using XDA-Developers mobile app
Hi,
i'm rather new with rooting, flashing and all the stuff that comes with it.
Now i have an Oppo Find7 and i managed to install the following:
-TWRP recovery
-OmniRom 5.1 nightly
-Gapps 5.1
I'm pleased everything worked but now i saw OmniRom 6.0, when i tried to flash it with gapps i encountered the first problem:
-The install of OmniRom went well but when i try to install Gapps 6.0 stock, it is saying i dont have enough storage? Can i somehow increase or free up this storage to it can fit?
Second question: If the above is possible, is there a way to flash OmniRom 6.0 and Gapps 6.0 without the loss of data? or do i still have to backup and restore with titanium backup?
Thanks in advance
Hi ...I'm using SM-N900 with lollipop 5.0 ...
I need to update my framrware by installing new rom (marshmallows ). However most what I found is that they have problem with the camera ...
IS THERE ANY STABLE ROM SO I CAN USE IT ?
Regards
Sent from my SM-N900 using XDA-Developers mobile app
Request Icon Resize inbuilt utility for omni rom 6.0.1
Dear Concern,
I am using omni rom 6.0.1 rom on my oppo find 7a the room is very smooth with all working function.
but the apps icon size are very big please add some functionality to resize the icon ASAP.
or please confirm if i am missing this option in ROM
Thanks & Regards.
Balvinder Singh
[email protected]
Hi there,
I have a Nexus 7 2013 wifi. Latest omni marshmallow but I have one issue. Battery drain.
It seems as it does not suspend. Maybe someone could point me in the right direction to help squash this pesky bug.
What I can add is that I have a Nexus 5 with same apps and settings without the issue .
Thank you
wich to download for Find 7a
Hi I'm glad to see omni back, as I was a user on samsung galaxy s2 !!!
I left the rom when i moved to find 7a, but now i absolutely want to try it !
So simple question as I didn't found it anywhere:
For my Find 7a, should I download rom from folder :
1) Find7
2) Find7op
Thanks to all
St Exupery said:
Hi I'm glad to see omni back, as I was a user on samsung galaxy s2 !!!
I left the rom when i moved to find 7a, but now i absolutely want to try it !
So simple question as I didn't found it anywhere:
For my Find 7a, should I download rom from folder :
1) Find7
2) Find7op
Thanks to all
Click to expand...
Click to collapse
Find 7. Find7op is the One Plus One.
Clear, Precise, Thanks you !
Installing this we
Recently updated my old Nexus 10/Manta to OmniROM 6.0.1 and I couldn't be happier. I had a fair bit of messing around on the first try until I got the sequence right...full wipe, flash ROM, flash Gapps pico and everything works REALLY well.
However, installing nightly updates is the same for me as the initial flash...I have to do a full wipe or I get the Google Services loop.
Am i doing something wrong is that how nightlies work currently?
Thanks.
"I have version SuperSU-v2.65-20151226141550 and this I flashing automatically after each OTA.
Just copy SuperSU zip to "/sdcard/OpenDelta/FlashAfterUpdate" and disable Secure mode in settings of system update."
I got this step from oppo forum, and it work perfectly and now my question is :
can i do samething like that but this is for font ?
because everytime after update omni nightly, i need too flash my font again
thx u
Really Need Help..... I have a mediatek 6572 device called Innjoo i1k .....
And stock rom which is flash able through sp flash tool.... guide me that how i port mt6572 rom into my device actually it need some replacement of file that have in the stock rom... but i have stock rom in sp flash tool firmware format not in zip format... waiting for your reply .... will be very thank full to u..... thanks.....
Recently updated my old Nexus 10/Manta to OmniROM 6.0.1 and I couldn't be happier. I had a fair bit of messing around on the first try until I got the sequence right...full wipe, flash ROM, flash Gapps pico and everything works REALLY well.
However, installing nightly updates is the same for me as the initial flash...I have to do a full wipe or I get the Google Services loop.
Am i doing something wrong is that how nightlies work currently?
Thanks.
Help with Galaxy Express 3
ModeFX01 said:
You Can Ask Help Here
Send From My SM-G900F Using XDA-Developers Mobile App
Click to expand...
Click to collapse
I just upgraded from ZTE Maven running Android 5.1, to a Galaxy Express 3 running Android 6.0.1. love the phone, but for one thing. I playing a game called Walking War Robots. It played good on the 5.0, but really lags bad on the 6.0.1.. I thought the better phone would be better but it's worse. I've also noticed that the graphics are better for the 6.0.1, including shadows for robots, etc. I believe it adds to the problem. What I'd like to know, is there a way to improve the performance of my phone to get rid of the lag, or is there a way to disable enhanced graphics and make the game think I'm running 5.0 to get rid of the shadows and enhanced graphics. I can do without robot shadows for the sake of smooth gameplay. Any help will be greatly appreciated... YodaXIII
password reset?
I decided to try the official Nougat for my 6P. Before going there, I made a TWRP backup, which I used "adb pull" to get to my computer. After trying Nougat and deciding I didn't like it, I went back to Omnirom from the TWRP backup. At boot it asks for the decryption password, which works fine, and omnirom starts up correctly. It then prompts me for password after restart, and it insists that I enter the wrong one. What options do I have to get past this, other than a clean install and then recover my apps/data from backups?
[edit: solved it] I entered the file manager of TWRP and removed /data/system/locksettings* After this, the next reboot required decryption password, as expected, but did not require a lockscreen password, so all was fine and I could again set a new lockscreen protection.
I have a micromax unite 4 pro (Q465) but on google there is no recovery img for any recovery I request u to help me how can I install a custom recovery to flash a zip filee please help me
Need custom Rom for honor 6 h60-l04
Hi i'm using huawei honor 6 h60-l04...There is no custom rom available for this phone. Its a nice mobile with 3gb ram ..but no custom rom available.so anyone please build any custom rom ???:crying:
How can i upgrade HTC DESIRE 820
Hi,
i have htc desire 820s ,i want to upgrade my mobile 4.4.4 to 5.1 or other update version ,
any one guide me about that ,i have already my device rooted ,so please tell me how can i do
thanks

Help me GApps not work on android 7.1.1 rom v12.1 aicp Nougat and lineageOS CM 14.1

help me ! i dont using gapps on this rom https://forum.xda-developers.com/verizon-galaxy-s5/development/rom-aicp-11-0-mm-t3357730/page53 . my I have chosen arm pico 7.1 pico gapps ,flash done wiht twrp . my phone now is blocked after a few seconds the boot . hope you help me. Thanks you !
Quycoctu said:
help me ! i dont using gapps on this rom https://forum.xda-developers.com/verizon-galaxy-s5/development/rom-aicp-11-0-mm-t3357730/page53 . my I have chosen arm pico 7.1 pico gapps ,flash done wiht twrp . my phone now is blocked after a few seconds the boot . hope you help me. Thanks you !
Click to expand...
Click to collapse
Use Open GAPS for AICP.
HolyHog said:
Use Open GAPS for AICP.
Click to expand...
Click to collapse
thank you for the reply ! but I have downloaded from the link in the this topic aicp rom open GApps and many people are also vulnerable and are in need of the support of developer
The problem is not the developer responsibility. It is the Lineage base rom that is picky about certain Gapps. So all the after market versions (CRdroid, Resurrection Remix, & AICP) for the KLTEVZW are similar. It also helps to wipe cache, data, system, & dalvik before installing. I have used all these roms and consistently Open gapps arm 7.1 mini works for me.
HolyHog said:
The problem is not the developer responsibility. It is the Lineage base rom that is picky about certain Gapps. So all the after market versions (CRdroid, Resurrection Remix, & AICP) for the KLTEVZW are similar. It also helps to wipe cache, data, system, & dalvik before installing. I have used all these roms and consistently Open gapps arm 7.1 mini works for me.
Click to expand...
Click to collapse
my phone galaxy s5 verizon using aicp rom android version 7.1.1 I want to ask for advice from your download GApps package working my rom. thanks a lot !: D

Nougat Custom ROM (AOSP based and GtrCraft builds preferred) users, please come here!

Hey guys! I'm trying to understand on which stock ROM you have flashed a Nougat custom ROM.
Personally, I'm on the latest RETEU 6.0.1 MPDS24.107-52-5 + January security patch (I don't remember, maybe 107-70) and I run AospExtended 4.3 with Optimus kernel r21.
So... what's your base firmware? Is it all ok?
I am using the combination you read in my signature. I have to disable HW overlays after every restart in order to have full screen video and stock camera working right. Except those, the device is faster and i love it.
melodystyle2003 said:
I am using the combination you read in my signature. I have to disable HW overlays after every restart in order to have full screen video and stock camera working right. Except those, the device is faster and i love it.
Click to expand...
Click to collapse
And what is the stock ROM you have on the base?
Hm, didn't notice that part of your question from my tablet. If it may be of any help, i was using stock mm 6.0.1 but i erased system, data, cache and dalvik (clean installation) prior flasing the AOSiP 6.0.
melodystyle2003 said:
Hm, didn't notice that part of your question from my tablet. If it may be of any help, i was using stock mm 6.0.1 but i erased system, data, cache and dalvik (clean installation) prior flasing the AOSiP 6.0.
Click to expand...
Click to collapse
The latest? And which version? European, Asian...
This one: XT1562_LUX_RETASIA_DS_6.0.1_MPDS24.107-52-5_cid7_subsidy-DEFAULT_CFC (which i used to convert it from single sim to dual sim). There is also a newer one, you can find it here.

S3 Neo (I9300I) Bootloops randomly

Hi guys! my s3 neo started randomly bootlooping after 1 year, I had RR 5.5.9 on it. I noticed that if I press button_vol_up when bootlooping the phone starts to access recovery, but suddenly continue rebooting so I tried to wipe ALL in the s3 neo from TWRP and with Odin I reflashed a new version of TWRP. After that, I clean installed the RR 5.5.9 and for a few days started working good.
Yesterday night the problem seems reappeared and then I soldered a new power button thinking it was the problem ( even if it's a random problem, it seems) but without fixing this problem. So I decided to desolder the power_button and starting using without it, and the phone was working very good, after 6 hours booom! the bootlooping is still here.
Can anyone help me? Thanks in Advance
When your RR is based on CM12.1 then the bootloop occurs when you install some new updated apps. You have 3 choices.
1) avoid these apps
2) Inform the developer of the apps, that with the new update your cm12.1 version gets a bootloop. The bootloop occurs, when the updated Version of the app was build with the new android build tools. The Solution is to use aapt instead of aapt2
3) upgrade to cm13 or cm14.1 . Theres also a RR based on 14.1. I didn't try this version, but i think with this rom you will not have the bootloop
same problem.
I have tried to flash it with many firmware without any success.
any help
alaa92 said:
same problem.
I have tried to flash it with many firmware without any success.
any help
Click to expand...
Click to collapse
What exactly is your problem?
Meanwhile there are quite stable Custom Roms that would be there:
- CM 12.1 from December 2017 (no more bootloops!)
- LOS 14.1 from August or also December 2018
- crDroid from November 2018

Caller can not hear voice when call using Jio4gvoice app

I am new in this forum. Lineage os 16 is a great rom, many many thanks to developers.
In my zuk z1 i am using lineage-16.0-20191014-nightly-ham-signed.zip. Recently I am facing some serious calling issue. During Jio4gvoice app call I clearly hear caller voice but the caller can not hear my voice. Tried calling to different numbers. This issue occurred on every nightly update after 14-Oct-2019. So, i am unable to use latest updates even tried clean flash till 08-Nov-2019 nightly update.
I am using twrp-3.2.3-20190202-ham.img. Before install nightly rom every time i take TWRP Backup and clean flash following Wipe Cache, Dalvik, System, Data then flash firmware-file.zip, then flash Lineage os 16 nightly ham rom zip then flash open gapps pico arm for android pie then wipe cache/dalvik and reboot.
Can anyone facing the same issue? Any solution, pls?
Ahaque1234 said:
I am new in this forum. Lineage os 16 is a great rom, many many thanks to developers.
In my zuk z1 i am using lineage-16.0-20191014-nightly-ham-signed.zip. Recently I am facing some serious calling issue. During Jio4gvoice app call I clearly hear caller voice but the caller can not hear my voice. Tried calling to different numbers. This issue occurred on every nightly update after 14-Oct-2019. So, i am unable to use latest updates even tried clean flash till 08-Nov-2019 nightly update.
I am using twrp-3.2.3-20190202-ham.img. Before install nightly rom every time i take TWRP Backup and clean flash following Wipe Cache, Dalvik, System, Data then flash firmware-file.zip, then flash Lineage os 16 nightly ham rom zip then flash open gapps pico arm for android pie then wipe cache/dalvik and reboot.
Can anyone facing the same issue? Any solution, pls?
Click to expand...
Click to collapse
Hi,
I found the same problem, but i have a build of July which has issues with headphone sound. can you please let me know where i can get lineage build of september please
is Jio Call working properly in the latest build?
Hi,
I found the same problem hence had to install an older version dated July. The problem with that build is that headphones work for 5 seconds and then speaker turns on and then no sound. Have you checked updated recently and does jio call work on recent updates?
thanks and regards,
balaji.

Categories

Resources