Samsung Galaxy S4 i9505 removes the TWRP custom recovery - Galaxy S 4 Q&A, Help & Troubleshooting

Samsung Galaxy S4 i9505 removes the TWRP custom recovery. I used odin3 v3.12.3. the custom recovery is TWRP-3.0.2-0-jfltexx.img.tar
here are the first attempt logs:
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> recovery.img
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!!
<ID:0/006> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Removed!!
these are the successive attempts logs:
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> FAIL! (DeviceInfo)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/006> Added!!

The first time you flash TWRP, did Odin auto reboot the phone? If yes, the stock recovery will overwrite TWRP which is why I do not recommend checking the autoreboot option in Odin.
When you connect the phone, does Odin assign a com port to the phone?

Related

[Q] Note 4 SM-N910S Rom to N910U Rom

Excuse Me, I have a Note 4, and want to change the Rom from N910S (Korea) to N910U (HK).
I tried to use Odin to directly install N910U Rom but fail, with follows error message:
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help, thousand Thanks!
kwok_h said:
Excuse Me, I have a Note 4, and want to change the Rom from N910S (Korea) to N910U (HK).
I tried to use Odin to directly install N910U Rom but fail, with follows error message:
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help, thousand Thanks!
Click to expand...
Click to collapse
Hi mate
just have finded out what was giving the error.
I've unchecked the reactivation lock under security tab on the android Kitkat... Now can flash whatever I wanted with odin.
Sent From Out of Nowhere
N910s
Do you mean you can flash over 910s an 910u rom ? ....

TWRP not flashing Tmobile 5.0

I updated to lollipop on my gs5 which was Knox 0x0.
I flashed TWRP 2.4.0 and 2.5.0 vsa ODin 3.07 and 3.09.
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!!
<ID:0/006> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
But I reboot and recovery is still stock, Knox 0x0 but says Custom.

SM-A520F impossible to flash stock rom

Hello all !
I'm sorry but i m stuck with my phone.
It's a A5 2017 which was flash with lineageOS with twrp.
I'm trying to install a stock rom downloaded from sammobile A520FXXU6CHR1_A520FOXA6CRH1_XEF (france).
I'm using odin V3.13
FRP lock is OFF
i m using original samsung cable
When i m trying to flash only AP it fail on recovery.img with kernel rev. check fail device:4 binary:3 on the screen.
I try with several version of odin.
Is everyone have some tips to recover my device .
Thank you so much
Julien
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 4229 M
<ID:0/006> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 4229 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Resolved by using fenrir.
cozo31 said:
Hello all !
I'm sorry but i m stuck with my phone.
It's a A5 2017 which was flash with lineageOS with twrp.
I'm trying to install a stock rom downloaded from sammobile A520FXXU6CHR1_A520FOXA6CRH1_XEF (france).
I'm using odin V3.13
FRP lock is OFF
i m using original samsung cable
When i m trying to flash only AP it fail on recovery.img with kernel rev. check fail device:4 binary:3 on the screen.
I try with several version of odin.
Is everyone have some tips to recover my device .
Thank you so much
Julien
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 4229 M
<ID:0/006> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 4229 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Click to expand...
Click to collapse

J730F to J730GM how to flash its keep failing !!!

dont know what to do
ODIN LOG
id:0/006> odin engine v
(id:3.1205).. <id:0/006> file analysis..
<id:0/006> setupconnection..
<id:0/006> initialization..
<id:0/006> set pit file..
<id:0/006> do not turn off target!!
<id:0/006> fail!
<id:0/006>
<id:0/006> re-partition operation failed.
<osm> all threads completed. (succeed 0 / failed 1)
please help
Shaneez88 said:
dont know what to do
ODIN LOG
id:0/006> odin engine v
(id:3.1205).. <id:0/006> file analysis..
<id:0/006> setupconnection..
<id:0/006> initialization..
<id:0/006> set pit file..
<id:0/006> do not turn off target!!
<id:0/006> fail!
<id:0/006>
<id:0/006> re-partition operation failed.
<osm> all threads completed. (succeed 0 / failed 1)
please help
Click to expand...
Click to collapse
Flash system and csc only, keep the modem and boot loader untouched.

Can't flash any ROM on A205F

Hi.
I can't flash any ROM on the A205F for some reason. I reach the download screen and any ROM I flash, including stock ROMs and every single one under the sun gives me the exact same error:
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1401)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 5347 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> param.bin
<ID:0/006> cm.bin
<ID:0/006> vbmeta.img
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> dt.img
<ID:0/006> dtbo.img
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
This is what I get via Odin, what do I do?

Categories

Resources