Hi there,
Hoipe someone can help
I have a Pumpkin Single Din Android HU - MTCB on 5.1.1.
Model: RQ0110 on Stock firmware
I bought the Pumpkin DVR camera to use as a dashcam.
But after plugging it in, music volume gets muted.
Mute is off, volume is adjustable, player is playing, graphic eq is registering, but no sound.
Touchscreen beeps are working so it is not a hardware issue.
- I have tried music and video
- I have tried stock music player, poweramp and VLC
- I have tried playing bluetooth music from my phone.
Still no sound other than touchscreen beeps.
As soon as I unplug the DVR camera, the sound comes back on.
I have gone through the settings to see if there is anything that may be causing it, but I can see nothing.
If anyone can help that would be great.
Hello. I have a erisin android 5.1 and the same problem. Any solution ?
Hi there,
Since this is my first post i want to say hello to everyone!
I decided 3 weeks ago to buy an android head unit for my audi a3, since i was bored listening radio or audio cd;s only...
Audi OEM RNS-E navigation was an option but it's too expensive just to have navigation, bt, and mp3 in my car... so i decided to go for an android hu that fits my dash...
I found this Xtrons android HU and bought it....
I was aware about the poor sound quality BUT it's actually VER VERY bad!!! on standard 10 speakers Audi sound system... (i was ready to root the device and use viper4android, or any hardware mod to improve the sound)
BUT I was lucky to find a BOSE sound system which i retrofitted on my car, and now the sound it's much better... like 8/10
NOW the last problem that i'm facing is some background noise, which i can't explain where it came from.
It only happen when i plug in the xtrons head unit. I swapped to the original Audi HU and there is no background noise. This means the background noise is picked up / generated by the Xtrons HU.
The noise is like a continuous "buzz" plus 2-3 pops and it only appears when the unit is on pause, mute or very low volume AND ONLY WHEN I SWITCH THE IGNITION ON (NO ENGINE RUNNING), if i revers the ignition to 0 position the noise disappears.
If the engine is running the noise is there, but is very hard to hear due to the diesel engine...
This noise IS NOT a wining noise, like an alternator generated...
Anyone encounter this problem? Is there any fix?
Tomorrow i am going to replace all the Xtrons HU extension cables (audio/video in/out) with shielded cables, and if doesn't work, i'll try some ferrite(s) maybe it helps...
Thanks!
justincr83 said:
Hi there,
Since this is my first post i want to say hello to everyone!
I decided 3 weeks ago to buy an android head unit for my audi a3, since i was bored listening radio or audio cd;s only...
Audi OEM RNS-E navigation was an option but it's too expensive just to have navigation, bt, and mp3 in my car... so i decided to go for an android hu that fits my dash...
I found this Xtrons android HU and bought it....
I was aware about the poor sound quality BUT it's actually VER VERY bad!!! on standard 10 speakers Audi sound system... (i was ready to root the device and use viper4android, or any hardware mod to improve the sound)
BUT I was lucky to find a BOSE sound system which i retrofitted on my car, and now the sound it's much better... like 8/10
NOW the last problem that i'm facing is some background noise, which i can't explain where it came from.
It only happen when i plug in the xtrons head unit. I swapped to the original Audi HU and there is no background noise. This means the background noise is picked up / generated by the Xtrons HU.
The noise is like a continuous "buzz" plus 2-3 pops and it only appears when the unit is on pause, mute or very low volume AND ONLY WHEN I SWITCH THE IGNITION ON (NO ENGINE RUNNING), if i revers the ignition to 0 position the noise disappears.
If the engine is running the noise is there, but is very hard to hear due to the diesel engine...
This noise IS NOT a wining noise, like an alternator generated...
Anyone encounter this problem? Is there any fix?
Tomorrow i am going to replace all the Xtrons HU extension cables (audio/video in/out) with shielded cables, and if doesn't work, i'll try some ferrite(s) maybe it helps...
Thanks!
Click to expand...
Click to collapse
I have that problem with my Erisin, too. Curious whether your new cables will solve the noise problem. Please post it here, if it worked out :good:
justincr83 said:
Hi there,
Since this is my first post i want to say hello to everyone!
I decided 3 weeks ago to buy an android head unit for my audi a3, since i was bored listening radio or audio cd;s only...
Audi OEM RNS-E navigation was an option but it's too expensive just to have navigation, bt, and mp3 in my car... so i decided to go for an android hu that fits my dash...
I found this Xtrons android HU and bought it....
I was aware about the poor sound quality BUT it's actually VER VERY bad!!! on standard 10 speakers Audi sound system... (i was ready to root the device and use viper4android, or any hardware mod to improve the sound)
BUT I was lucky to find a BOSE sound system which i retrofitted on my car, and now the sound it's much better... like 8/10
NOW the last problem that i'm facing is some background noise, which i can't explain where it came from.
It only happen when i plug in the xtrons head unit. I swapped to the original Audi HU and there is no background noise. This means the background noise is picked up / generated by the Xtrons HU.
The noise is like a continuous "buzz" plus 2-3 pops and it only appears when the unit is on pause, mute or very low volume AND ONLY WHEN I SWITCH THE IGNITION ON (NO ENGINE RUNNING), if i revers the ignition to 0 position the noise disappears.
If the engine is running the noise is there, but is very hard to hear due to the diesel engine...
This noise IS NOT a wining noise, like an alternator generated...
Anyone encounter this problem? Is there any fix?
Tomorrow i am going to replace all the Xtrons HU extension cables (audio/video in/out) with shielded cables, and if doesn't work, i'll try some ferrite(s) maybe it helps...
Thanks!
Click to expand...
Click to collapse
Hey you. Did the new cables solve the problem? I'm asking because I want to get rid of the annoying sound, too.
Sc4r3Crow said:
Hey you. Did the new cables solve the problem? I'm asking because I want to get rid of the annoying sound, too.
Click to expand...
Click to collapse
Unfortunately, no, i didn't fix the annoying buzz
justincr83 said:
Unfortunately, no, i didn't fix the annoying buzz
Click to expand...
Click to collapse
It's a pity ?
Did you also try a noise suppressor or something like that?
Sc4r3Crow said:
It's a pity ?
Did you also try a noise suppressor or something like that?
Click to expand...
Click to collapse
Hey,
Has anyone found solution to this annoying noise ? I have installed XTRONS unit in my audi a3 and can't get rid of it. Have tried already ground loop isolators and ferrite filters with no luck.
Hello everyone.
I have a problem with my new android head unit. It is an MTCD PX3 octacore with 2 GB of RAM Android 7.1.2 in a Toyota Corolla.
The problem is that I have a deficiency in sound. The sound when playing a CD (DVD) is perfect and high, but on the rest of the audio inputs (mainly player and radio) it sounds lower and with interference or noise.
This noise increases as volume increases and becomes annoying.
I thought it would have to be a problem of volume levels, but checking the factory settings (Voice menu) putting everything to the maximum I still have the annoying interference.
I start to be a little desperate because I do not know what to do, I hope some of you can help me.
Thank you very much in advance.
Hi, im a newbie here.
I just buy an aftermarket secondhand chinese headunit and already put it in the car.
When my car only using battery, the head unit function flawlessly. But after i put it in the ignition, the headunit restart and all the media become very low sound almost mute. The only sound coming out from the speaker is 'beep' if i touch the screen.
Right now, to make it work I am pushing reset button or restart my car after 15 minutes.
What should i do to make it working? Is it hardware problem or android problem?
My headunit:
Model number: car audio
Android version: 5.1.1
Built no:ALPS.LD_kk1.MP10V1.6
Mcu:sm92a.1.170427.v1.1-jly-b3
Sorry for bad english
<img src="https://preview.ibb.co/h15RVw/IMG_20171114_182635.jpg" alt="IMG_20171114_182635" border="0">
Hi, I have problem with playing music on Spotify app. Everything was ok until I download my library to offline listening.
When I select the next song the play bar moves normally but I cannot hear anything. It starts working after pressing the pause and play. On Spotify Lite the same problem.
My unit is dedicated to Alfa Romeo 159 Android 10 RK3368 ZQPX5 4GB RAM 64GB ROM, maybe custom rom will fix this issue but I don`t know which rom could I install on this unit (compilation -> rk3368-userdebug 10 QP1A. 190711.019 092150 test-keys). I try reinstall app and even unit factory reset but still not working.
I`ve got also MTCE in my BMW E46 PX5 4GB RAM 32GB ROM and everything in fine even after update to Android 9 (I tried also custom roms and there where no problems).
Does anyone know how to fix it? Offline playing from Spotify is very important for me...
Spotify app
I have the same problem. When you skip to the next song you see the time running, but there is no sound.
When you pause the song and than play again, then you hear it.
Every song over and over.
Anyone know a solution?
Also the steeringwheel features are empty.
And the buttons on my sw do the same.
Anyone got an APK for the sw?
I have made Youtube videos, but unable to show them here
I'm also having the same problem, did anyone found a solution?
Hello, i have the exact same problem ..
does anyone have a solution so far ?
Not android auto, requesting mod moves to Android Head-units forum