Related
Hi,
I just wanted to flash a theme for my rom. But when I tried to reboot in recovery... My phone says custom binary blocked by frp lock!
How do i fix this? I didnt even try to factory reset it. I just tried booting in recovery.
Where have i selected this lock and how do i remove it? What THE hell is this?
Pls heeeelp
liobeir said:
Hi,
I just wanted to flash a theme for my rom. But when I tried to reboot in recovery... My phone says custom binary blocked by frp lock!
How do i fix this? I didnt even try to factory reset it. I just tried booting in recovery.
Where have i selected this lock and how do i remove it? What THE hell is this?
Pls heeeelp
Click to expand...
Click to collapse
Go to settings>developers options
Then make sure the OEM unlock is ENABLED.
Never disable it.
Good luck,
Have a very happy new year.
Sent from my SM-G928T using Tapatalk
Misterjunky said:
Go to settings>developers options
Then make sure the OEM unlock is ENABLED.
Never disable it.
Good luck,
Have a very happy new year.
Sent from my SM-G928T using Tapatalk
Click to expand...
Click to collapse
Thats THE problem....i cant boot up my phone. It is Locked. I read about THE lock and I'm Locked out of my phone for 72 houres? But If I flash stock rom through odin...Will this reset my device or is it Locked for that? Cause that's what it says.... Factory reset lock....
liobeir said:
Thats THE problem....i cant boot up my phone. It is Locked. I read about THE lock and I'm Locked out of my phone for 72 houres? But If I flash stock rom through odin...Will this reset my device or is it Locked for that? Cause that's what it says.... Factory reset lock....
Click to expand...
Click to collapse
If it cannot boot you need to Odin flash the official stock firmware in download mode before you can do anything else.
Good luck.
Sent from my SM-G928T using Tapatalk
---------- Post added at 12:48 AM ---------- Previous post was at 12:43 AM ----------
liobeir said:
Thats THE problem....i cant boot up my phone. It is Locked. I read about THE lock and I'm Locked out of my phone for 72 houres? But If I flash stock rom through odin...Will this reset my device or is it Locked for that? Cause that's what it says.... Factory reset lock....
Click to expand...
Click to collapse
Odin flashing will not delete anything in your internal sdcard, it will delete the current rom.
For best results do a full wipe in recovery mode before Odin flashing the Samsung official firmware.
Sent from my SM-G928T using Tapatalk
Misterjunky said:
If it cannot boot you need to Odin flash the official stock firmware in download mode before you can do anything else.
Good luck.
Sent from my SM-G928T using Tapatalk
---------- Post added at 12:48 AM ---------- Previous post was at 12:43 AM ----------
Odin flashing will not delete anything in your internal sdcard, it will delete the current rom.
For best results do a full wipe in recovery mode before Odin flashing the Samsung official firmware.
Sent from my SM-G928T using Tapatalk
Click to expand...
Click to collapse
I can only boot in download mode.... I Will try to flash stock rom tonight. But i think THE lock Will prevent me from doing it. pfffffff
liobeir said:
Hi,
I just wanted to flash a theme for my rom. But when I tried to reboot in recovery... My phone says custom binary blocked by frp lock!
How do i fix this? I didnt even try to factory reset it. I just tried booting in recovery.
Where have i selected this lock and how do i remove it? What THE hell is this?
Pls heeeelp
Click to expand...
Click to collapse
Before flashing do as Misterjunky said, but also you need to DELETE google account.on device.Only then in download mode it will show message FTP OFF.
Every time you flash ROM you need to delete google account.
tin2404 said:
Before flashing do as Misterjunky said, but also you need to DELETE google account.on device.Only then in download mode it will show message FTP OFF.
Every time you flash ROM you need to delete google account.
Click to expand...
Click to collapse
the problem is I can't boot in recovery. I can't wipe. just tried flashing tarp recovery with odin but it fails.... I really hope I can flash the stockrom!!!! I DON'T GET IT ! I didn't do a factory reset. but i guess I disbabled it somehow and then when I tried to boot in recovery...I directly got the message saying: custom binary blocked by frp lock.
tried to flash firmware from samfirmware but..... fails at the end.... I'm hopeless!!! should I keep trying to flash stock firmwares??
liobeir said:
tried to flash firmware from samfirmware but..... fails at the end.... I'm hopeless!!! should I keep trying to flash stock firmwares??
Click to expand...
Click to collapse
Hey. If you show which firmware did you try, Odin fail's screenshoot and more detail of your problem, someone can help easily.. Good luck.
BtW: Did you ever try to flash ''hidden.img(not tar) before or after flashing the firmware?
Konsstantine34 said:
Hey. If you show which firmware did you try, Odin fail's screenshoot and more detail of your problem, someone can help easily.. Good luck.
BtW: Did you ever try to flash ''hidden.img(not tar) before or after flashing the firmware?
Click to expand...
Click to collapse
I managed to fix it by flashing the firmware, then rebooting my phone, restarted odin also and then flash the Hidden.img.tar. Omg! I was starting to get worried! Thanks for all the help guys!
Konsstantine34 said:
Hey. If you show which firmware did you try, Odin fail's screenshoot and more detail of your problem, someone can help easily.. Good luck.
BtW: Did you ever try to flash ''hidden.img(not tar) before or after flashing the firmware?
Click to expand...
Click to collapse
Good info... what's is hidden.img? And where is?
jah2110 said:
Good info... what's is hidden.img? And where is?
Click to expand...
Click to collapse
In the firmware.tar.md5, I just saw that some guys crossed over the fail(soft brick) with flashing hidden.img etc, (or fail after cm.bin).. Hidden.img contains \\assets, Meta-Inf, org, res, AndroidManifest.xml, classex.odex, resorces.odex files// I think phone's fonts, banners, properties etc..
@liobeir Did you solve or not, I dont get it..
Konsstantine34 said:
In the firmware.tar.md5, I just saw that some guys crossed over the fail(soft brick) with flashing hidden.img etc, (or fail after cm.bin).. Hidden.img contains \\assets, Meta-Inf, org, res, AndroidManifest.xml, classex.odex, resorces.odex files// I think phone's fonts, banners, properties etc..
@liobeir Did you solve or not, I dont get it..
Click to expand...
Click to collapse
I solved it! So glad!
liobeir said:
I solved it! So glad!
Click to expand...
Click to collapse
hello guys i jst stumble upon the same problem.
not even with stock samfirmware i canbt fix this... some help please
liobeir said:
Hi,
I just wanted to flash a theme for my rom. But when I tried to reboot in recovery... My phone says custom binary blocked by frp lock!
How do i fix this? I didnt even try to factory reset it. I just tried booting in recovery.
Where have i selected this lock and how do i remove it? What THE hell is this?
Pls heeeelp
Click to expand...
Click to collapse
Flash stock rom with odin, factory reset and you are done. do not set up the phone with google account to turn it again on. flash recovery and your favorite rom.
Enable oem unlock so it prevents this from happening again.
Frp lock and Recovery not Seandroid enforced.
So I bought this S6 edge plus two days ago. Set up my google account, fingerprint lock and pin.
Inserted the pin 24 hours ago and I'm locked out. Stuck on the animation screen with a red inscription saying Custom Binary Blocked by FRP lock.
Pressing the home+ power + lower volume button takes me to this interface I have noidea of.
Pressing the up button+ power+ home says Recovery Is Not Seandroid Enforced.
Ps...It's been a while since I used android.
So my questions are
1. Which one is the hard reset and when does the 24 hours start?
2.What's with that interface?
3.WHat happens after my 24/72 hours?
Hello everyone, hope all is well.
I was trying to install a factory ROM for my Galaxy S7 Edge and during the process, I believe I went and flashed a wrong ROM file (I think it was Galaxy S6 Edge's).
Anyways, due to that, my phone is completely bricked (softbricked? because I can turn it on?).
The problem I'm having is that when I turn on the device normally, it will show the GALAXY S7 EDGE logo but then it'd go straight into recovery mode.
In the recovery mode, it'd say "dm-verity verification failed.. " , "E: failed to mount /system (Invalid argument)". Then when I press Apply update from ADB/SD Card, it gives an error saying "Update from external storage is disabled".
I am able to get into the download mode also and downloaded correct factory ROM and flashed it but it gives me an error saying "Odin protocol version error" in the phone, and in Odin, it stops at "Initializing..." and the program crashes after 5 minutes or so.
I there anything I can do to unbrick this dude? I've been searching all over the place yesterday and could't find a right solution for me so I decided to write one myself.
Thanks in advance and I'll appreciate any help.
Model: G935A. AT&T.
schoolbus11 said:
Hello everyone, hope all is well.
I was trying to install a factory ROM for my Galaxy S7 Edge and during the process, I believe I went and flashed a wrong ROM file (I think it was Galaxy S6 Edge's).
Anyways, due to that, my phone is completely bricked (softbricked? because I can turn it on?).
The problem I'm having is that when I turn on the device normally, it will show the GALAXY S7 EDGE logo but then it'd go straight into recovery mode.
In the recovery mode, it'd say "dm-verity verification failed.. " , "E: failed to mount /system (Invalid argument)". Then when I press Apply update from ADB/SD Card, it gives an error saying "Update from external storage is disabled".
I am able to get into the download mode also and downloaded correct factory ROM and flashed it but it gives me an error saying "Odin protocol version error" in the phone, and in Odin, it stops at "Initializing..." and the program crashes after 5 minutes or so.
I there anything I can do to unbrick this dude? I've been searching all over the place yesterday and could't find a right solution for me so I decided to write one myself.
Thanks in advance and I'll appreciate any help.
Model: G935A. AT&T.
Click to expand...
Click to collapse
what firmware was you running and what firmware are you trying to flash ?
schoolbus11 said:
Hello everyone, hope all is well.
I was trying to install a factory ROM for my Galaxy S7 Edge and during the process, I believe I went and flashed a wrong ROM file (I think it was Galaxy S6 Edge's).
Anyways, due to that, my phone is completely bricked (softbricked? because I can turn it on?).
The problem I'm having is that when I turn on the device normally, it will show the GALAXY S7 EDGE logo but then it'd go straight into recovery mode.
In the recovery mode, it'd say "dm-verity verification failed.. " , "E: failed to mount /system (Invalid argument)". Then when I press Apply update from ADB/SD Card, it gives an error saying "Update from external storage is disabled".
I am able to get into the download mode also and downloaded correct factory ROM and flashed it but it gives me an error saying "Odin protocol version error" in the phone, and in Odin, it stops at "Initializing..." and the program crashes after 5 minutes or so.
I there anything I can do to unbrick this dude? I've been searching all over the place yesterday and could't find a right solution for me so I decided to write one myself.
Thanks in advance and I'll appreciate any help.
Model: G935A. AT&T.
Click to expand...
Click to collapse
First of all why were you trying to flash a stock Rom? Next its a piece of cake take it to your local warranty store and ask them to flash your stock ROM as long as you didn't try to root it they should fash it for you. I've done it many times. Just tell them you were charging it overnight and had it turned off and when you booted up the next morning it was going crazy.
As I said if you weren't trying to root they should do it for you.
"All we know is...He's called the Stig!"
Sent from my Echoe driven G935F
strikerdj2011 said:
what firmware was you running and what firmware are you trying to flash ?
Click to expand...
Click to collapse
I was on a rooted Galaxy S7 firmware for development purpose but I wanted to take it back to factory setting and un-root the device by installing a fresh new one.
s7freak said:
First of all why were you trying to flash a stock Rom? Next its a piece of cake take it to your local warranty store and ask them to flash your stock ROM as long as you didn't try to root it they should fash it for you. I've done it many times. Just tell them you were charging it overnight and had it turned off and when you booted up the next morning it was going crazy.
As I said if you weren't trying to root they should do it for you.
"All we know is...He's called the Stig!"
Sent from my Echoe driven G935F
Click to expand...
Click to collapse
That sounds like a clever idea but if there's any way I could try to do it by myself before I take it to them, I wanted to try.
schoolbus11 said:
I was on a rooted Galaxy S7 firmware for development purpose but I wanted to take it back to factory setting and un-root the device by installing a fresh new one.
Click to expand...
Click to collapse
if your rooted who dont you just flash a custom rom boot up then flash stock ? and i thought you cant root the american model as of the locked bootloader just you said 935a thought that was usa model ?
strikerdj2011 said:
if your rooted who dont you just flash a custom rom boot up then flash stock ? and i thought you cant root the american model as of the locked bootloader just you said 935a thought that was usa model ?
Click to expand...
Click to collapse
Well now I couldn't flash any of the firmwares out there that I found. I kept on getting the same error stated above. It is usa at&t model.
Perhaps, is there a custom ROM and/or other steps you'd recommend me to try?
Thanks for your replies though, I appreciate it very much.
schoolbus11 said:
Well now I couldn't flash any of the firmwares out there that I found. I kept on getting the same error stated above. It is usa at&t model.
Perhaps, is there a custom ROM and/or other steps you'd recommend me to try?
Thanks for your replies though, I appreciate it very much.
Click to expand...
Click to collapse
just a massive shot in the dark here dm-verity verification failed when we flash a custom rom on our international 935f in twrp we have to format data in twrp to be able to flash any thing how about if there is a twrp for the qualacom version how about you flash the twrp format data then flash stock via twrp i know its a shot in the dark but best i can think of at the moment
strikerdj2011 said:
just a massive shot in the dark here dm-verity verification failed when we flash a custom rom on our international 935f in twrp we have to format data in twrp to be able to flash any thing how about if there is a twrp for the qualacom version how about you flash the twrp format data then flash stock via twrp i know its a shot in the dark but best i can think of at the moment
Click to expand...
Click to collapse
I will try what you have suggested. But isn't twrp only install-able when the phone is actually turned on to OS? As far as I've researched, I saw that it needs to have developer mode on.
schoolbus11 said:
I will try what you have suggested. But isn't twrp only install-able when the phone is actually turned on to OS? As far as I've researched, I saw that it needs to have developer mode on.
Click to expand...
Click to collapse
no odin flash twrp in download mode make sure there is a twrp for you device i know there is for the flat s7
Try smart switch emergancy mode
strikerdj2011 said:
no odin flash twrp in download mode make sure there is a twrp for you device i know there is for the flat s7
Click to expand...
Click to collapse
I tried to download one here http://androiding.how/galaxy-s7-edge-twrp-recovery/ and tried to flash it but I get the same error => "Odin protocol version error!", and stuck at "Initialization..".
Do you think you could verify if that link could be the one I'm looking for?
MATRIKS said:
Try smart switch emergancy mode
Click to expand...
Click to collapse
I tried it but unfortunately, I don't understand why but it doesn't recognize my S/N.
schoolbus11 said:
I tried to download one here http://androiding.how/galaxy-s7-edge-twrp-recovery/ and tried to flash it but I get the same error => "Odin protocol version error!", and stuck at "Initialization..".
Do you think you could verify if that link could be the one I'm looking for?
I tried it but unfortunately, I don't understand why but it doesn't recognize my S/N.
Click to expand...
Click to collapse
thats for the international version which is exynos and not qualacom
strikerdj2011 said:
thats for the international version which is exynos and not qualacom
Click to expand...
Click to collapse
Right.. Then that means I should wait for Qualcomm version to be released?
there doesnt seem to be one yet for the usa version of the edge you did turn on thre allow oem unlock in developer options on the device before you started playing with the firmwares didnt you ?
strikerdj2011 said:
there doesnt seem to be one yet for the usa version of the edge you did turn on thre allow oem unlock in developer options on the device before you started playing with the firmwares didnt you ?
Click to expand...
Click to collapse
Allow oem unlock.. I didn't allow it.. I regretted so much after I flashed everything and realized i didnt turn it on. -_- Probably not fixable?
schoolbus11 said:
Allow oem unlock.. I didn't allow it.. I regretted so much after I flashed everything and realized i didnt turn it on. -_- Probably not fixable?
Click to expand...
Click to collapse
i am not a dev mate just learn from observation lol but from other devices i have seen them bricked if thats not been allowed in dev options but i am not 100% sure on this one service center is probs you best bet as some one said earlier as am sure if thats not checked nothing can be flashed as that command allows it its like the bootloader is still locked kind of thing
I would take it a service repair center before messing it up anymore, just to be on the safe side, you never know with these things, yeah it might be fixable but if knox isn't voided then you can just have it repaired properly for free.
strikerdj2011 said:
i am not a dev mate just learn from observation lol but from other devices i have seen them bricked if thats not been allowed in dev options but i am not 100% sure on this one service center is probs you best bet as some one said earlier as am sure if thats not checked nothing can be flashed as that command allows it its like the bootloader is still locked kind of thing
Click to expand...
Click to collapse
samuel2706 said:
I would take it a service repair center before messing it up anymore, just to be on the safe side, you never know with these things, yeah it might be fixable but if knox isn't voided then you can just have it repaired properly for free.
Click to expand...
Click to collapse
I figured... Thanks for your help and suggestions anyways. Have a good one.
schoolbus11 said:
I figured... Thanks for your help and suggestions anyways. Have a good one.
Click to expand...
Click to collapse
Did you manage to get this sorted?
I'm having same issue
bump
Forgot to activate OEM-Unlock for Root. Phone Bricked: "Custom binary blocked by FRP"
Hello,
today i rooted my J5 (SM-J500FN) via Odin and CF-Auto-Root.
Everyting went well but after the root i unticked OEM-Lock (please dont ask me why i did it) and restarted my phone and this nice screen greeted me: "Custom binary blocked by FRP. SECURE FAIL: KERNEL"
So I tried everything I found on the Web and found nothing really helpful. Then i tried flashing the recovery and reflashing CF-Auto-Root but both got blocked in the Download Mode with the message "FRP Block".
Please can someone help me, i really hope i dont have to reset my phone because my google authenticator is stored on it, and it would be a real pain to write to the support of every account i connected to reset my Security Options.
Thanks, Toby
P.S: when i flash the boot.img does it wipe my device?
Toby9 said:
Hello,
today i rooted my J5 (SM-J500FN) via Odin and CF-Auto-Root.
Everyting went well but after the root i unticked OEM-Lock (please dont ask me why i did it) and restarted my phone and this nice screen greeted me: "Custom binary blocked by FRP. SECURE FAIL: KERNEL"
So I tried everything I found on the Web and found a few things like flashing the recovery. I tried reflashing CF-Auto-Root but both got blocked in the Download Mode with the message "FRP Block".
Please can someone help me, i really hope i dont have to reset my phone because my google authenticator is stored on it, and it would be a real pain to write to the support of every account i connected to reset my Security Options.
Thanks, Toby
P.S: when i flash the boot.img does it wipe my device?
Click to expand...
Click to collapse
Just flash the stock firmware.
ashyx said:
Just flash the stock firmware.
Click to expand...
Click to collapse
Doesn't it reset my phone?
I saw a video about it but after he started the phone the device setup greeted him...
Toby9 said:
Doesn't it reset my phone?
I saw a video about it but after he started the phone the device setup greeted him...
Click to expand...
Click to collapse
It will reset it...
Try using Smart Switch from Samsung to backup you stuff and accounts. Maybe it will work. Using Smart Switch you can also easily reflash the latest Marshmallow firmware.
Amarius1 said:
It will reset it...
Try using Smart Switch from Samsung to backup you stuff and accounts. Maybe it will work. Using Smart Switch you can also easily reflash the latest Marshmallow firmware.
Click to expand...
Click to collapse
And if i only flash the boot.img which is inside the firmware archive? would that be "save" to try?
Toby9 said:
And if i only flash the boot.img which is inside the firmware archive? would that be "save" to try?
Click to expand...
Click to collapse
I don't know about that... Try asking someine more experienced.
I do know that even in Recovery mode the ROM locks you out and doesn't let you factory reset for example
Amarius1 said:
I don't know about that... Try asking someine more experienced.
I do know that even in Recovery mode the ROM locks you out and doesn't let you factory reset for example
Click to expand...
Click to collapse
Ok thank you I just went for the boot.img flash and it worked! puh im relieved
Now you know that it does not reset.
I will write a guide to finally get rid of this stupid FRP error once and for all!
Toby9 said:
Ok thank you I just went for the boot.img flash and it worked! puh im relieved
Now you know that it does not reset.
I will write a guide to finally get rid of this stupid FRP error once and for all!
Click to expand...
Click to collapse
Congrats! Had the sane problem last summer and I had to completely reset it...
(Btw why thank you? I didn"t do anything ???)
Toby9 said:
Ok thank you I just went for the boot.img flash and it worked! puh im relieved
Now you know that it does not reset.
I will write a guide to finally get rid of this stupid FRP error once and for all!
Click to expand...
Click to collapse
I did a guide in past: https://forum.xda-developers.com/showpost.php?p=68408932&postcount=65 . I'll add it to the new Q&A thread after I'll update that thread (when I'll have time).
Feel free to do a new guide.
Toby9 said:
Doesn't it reset my phone?
I saw a video about it but after he started the phone the device setup greeted him...
Click to expand...
Click to collapse
No it does not. You are not affecting the data partition.
This would only happen if you flashed the factory repair firmware.
Thank you all. Here is my Guide: https://forum.xda-developers.com/android/general/complete-guide-to-rid-custom-binary-t3541403
It is generally for all (Samsung) Smarphones as i believe that it wont be any different.
Amarius1 said:
Congrats! Had the sane problem last summer and I had to completely reset it...
(Btw why thank you? I didn"t do anything )
Click to expand...
Click to collapse
Im just glad it worked
Toby9 said:
Thank you all. Here is my Guide: https://forum.xda-developers.com/android/general/complete-guide-to-rid-custom-binary-t3541403
It is generally for all (Samsung) Smarphones as i believe that it wont be any different.
Im just glad it worked
Click to expand...
Click to collapse
Happy for you ^^
When activating the oem unlock you can install Twrp, kernel or custom rom without the activation of FRP security that is activated when you establish a security pattern in the device
When the binary is blocked by the FRP you must install the factory firmware, then enter the recovery and do a factory reset since the FRP prevents external access to the system and data as prevention
You will be prompted for the email and password of the previously used account
Demicro said:
When activating the oem unlock you can install Twrp, kernel or custom rom without the activation of FRP security that is activated when you establish a security pattern in the device
When the binary is blocked by the FRP you must install the factory firmware, then enter the recovery and do a factory reset since the FRP prevents external access to the system and data as prevention
You will be prompted for the email and password of the previously used account
Click to expand...
Click to collapse
You only need to enter your login details if you factory reset.
Flashing the stock firmware is enough to remove frp. No need to factory reset.
ashyx said:
You only need to enter your login details if you factory reset.
Flashing the stock firmware is enough to remove frp. No need to factory reset.
Click to expand...
Click to collapse
This problem I had several months ago, I did not remember well. You are right ?
custom binary blockby frp lock on samsung j510gn
ashyx said:
Just flash the stock firmware.
Click to expand...
Click to collapse
hi. i really need help with this. tried several times flashing stockrom using different versions of odin and trying out several firmwares. always result: FAIL. Its a company phone. I honestly didn't do anything with it. Went to bed, next day woke up with the phone off. when I turned it on, bam! custom binary message.
MoximuZ said:
hi. i really need help with this. tried several times flashing stockrom using different versions of odin and trying out several firmwares. always result: FAIL. Its a company phone. I honestly didn't do anything with it. Went to bed, next day woke up with the phone off. when I turned it on, bam! custom binary message.
Click to expand...
Click to collapse
Can you send the logs u get from odin? Also make sure u got the correct model of stock rom for ur device.
I also have frp lock om my phone. It will not boot past maim boot screen. I cannot install twrp due to cuatom binary blocked error. Adb doesnt recognkze my phone either. Odin does, i installed the stock firmware and still will not reboot. Any suggestions or thoughts?? I havent tried to turn oem yet via android studio. Currently in the middle of that. Please help
ndiddy88 said:
I also have frp lock om my phone. It will not boot past maim boot screen. I cannot install twrp due to cuatom binary blocked error. Adb doesnt recognkze my phone either. Odin does, i installed the stock firmware and still will not reboot. Any suggestions or thoughts?? I havent tried to turn oem yet via android studio. Currently in the middle of that. Please help
Click to expand...
Click to collapse
Which device? Don't you know your Google login details?
Hello,
I'm a Newbie
How can i erase the FRP on my s7 edge ? nothing works on my s7 edge.
Is there possibility with odein or else ?
my simcard is broken so only with odin or other software
Can someone help me, thx a lot :good::good::good:
CrankyBoy^^ said:
Hello,
I'm a Newbie
How can i erase the FRP on my s7 edge ? nothing works on my s7 edge.
Is there possibility with odein or else ?
my simcard is broken so only with odin or other software
Can someone help me, thx a lot :good::good::good:
Click to expand...
Click to collapse
hello "A Newbie", how goes it? LOLOL
welcome to the fray, we are all only here to learn, help, and/or both at the same time, so youre in a good place.
Anyways, did you do a factory reset and are now stuck with the FRP screen?
exactly, i do a factory reset and now I'm here
I'm searching for Help
CrankyBoy^^ said:
exactly, i do a factory reset and now I'm here
I'm searching for Help
Click to expand...
Click to collapse
ok, get the firmware for your phone from sammobile.com but use samfirm or frija to download it, flash the firmware in Odin 9 time. yes, 9 times. try booting between flashes and itll go away by the 9th time. Not even kidding
9 time flashing. No chance. FRP lock is almost there.
Installed is G935FXXS6ESI4
What can i do ? Any Idea = Combination Firmware ?
Youdoofus said:
ok, get the firmware for your phone from sammobile.com but use samfirm or frija to download it, flash the firmware in Odin 9 time. yes, 9 times. try booting between flashes and itll go away by the 9th time. Not even kidding
Click to expand...
Click to collapse
is this really working ?
bcs my sim tray is broken and have flickering screen on my phone and want other way to bypass FRP
p.p "try booting between flashes and itll go away by the 9th time" on each flash to boot and re-flash it ?
loonbg said:
is this really working ?
bcs my sim tray is broken and have flickering screen on my phone and want other way to bypass FRP
p.p "try booting between flashes and itll go away by the 9th time" on each flash to boot and re-flash it ?
Click to expand...
Click to collapse
not anymore. there was a patch that fixed the bug that allowed this to occur. Sammy is always right on our tails. now you need the combination firmware, which you flash in Odin as well then follow it up with the stock firmware from sammobile since the combination FW isnt really bootable (it is, but its weird lol)
Youdoofus said:
not anymore. there was a patch that fixed the bug that allowed this to occur. Sammy is always right on our tails. now you need the combination firmware, which you flash in Odin as well then follow it up with the stock firmware from sammobile since the combination FW isnt really bootable (it is, but its weird lol)
Click to expand...
Click to collapse
I flashed the combination firmware. After that I flashed my stock firmware but now I get stuck on recovery screen. First it says "Erasing" and then the dead Android mascot shows up. Can't boot into system. Any suggestions? FRP Lock is still on and I can't flash TWRP, custom binary is locked by frp.
possible solution
Hi, how are you? I'm sorry for my english, I'm from Brazil and I'm using the ksks translator so with my j5 i used the frp hijacker (just put it on google) there you choose the phone model, put it in download mode, install the program on the computer, choose the model, check remove frp and a hijack it! and ready frp unlocked
M.Ned said:
I flashed the combination firmware. After that I flashed my stock firmware but now I get stuck on recovery screen. First it says "Erasing" and then the dead Android mascot shows up. Can't boot into system. Any suggestions? FRP Lock is still on and I can't flash TWRP, custom binary is locked by frp.
Click to expand...
Click to collapse
Does Odin say it flashed the firmware successfully
Youdoofus said:
Does Odin say it flashed the firmware successfully
Click to expand...
Click to collapse
Yes it does. I tried 3 different firmwares from different regions on SamMobile. Still no luck...
M.Ned said:
Yes it does. I tried 3 different firmwares from different regions on SamMobile. Still no luck...
Click to expand...
Click to collapse
tried it on another computer? Ive had that issue with my desktop/laptop(s). I never dug into what caused it to fail on the desktop vs working on a few laptops. Literally everything else works exactly as it should on the desktop so i just let it be an unresolved oddity. Likely not worth the time it would take to resolve. Anywho, try a different computer and/or diff cable. I just ordered an Anker cable from amazon and its thicker and more sturdy than the micro usb cable ive been hanging on to from my old blackberry tour. Cables are stupid cheap online these days, even for the very very good ones. Perhaps worth a shot, but i cant suggest that you spend money on anything. I can say that its what I would do.
Hi All,
I brick my SM-N9860, after playing with changing csc on TGY firmware I got to situation that my phone doesn't boot to system and I have FRP lock. Its stuck on download mode (attached pics).
Factory reset in recovery mode doesn't work and I cant flash new firmware with odin because of FRP lock.
Maybe some can help how can I resolve this issue?
I tried to flash combination file with pit file but I get error that there is a FRP lock. I wanted to try the option in recovery "Apply update with adb" but I cant find OTA file for SM-N9860.
From what I understood there is some boxes and dongles like Octoplus Pro Box that can reflash the phone and remove the FRP lock but maybe there is a solution easier than this that works with odin??
The problem is to make my phone to boot, than I could remove the FRP lock because my problem not the google credentials only that it not boot up after factory reset...
chetbiz said:
Hi All,
I brick my SM-N9860, after playing with changing csc on TGY firmware I got to situation that my phone doesn't boot to system and I have FRP lock. Its stuck on download mode (attached pics).
Factory reset in recovery mode doesn't work and I cant flash new firmware with odin because of FRP lock.
Maybe some can help how can I resolve this issue?
I tried to flash combination file with pit file but I get error that there is a FRP lock. I wanted to try the option in recovery "Apply update with adb" but I cant find OTA file for SM-N9860.
From what I understood there is some boxes and dongles like Octoplus Pro Box that can reflash the phone and remove the FRP lock but maybe there is a solution easier than this that works with odin??
The problem is to make my phone to boot, than I could remove the FRP lock because my problem not the google credentials only that it not boot up after factory reset...
Click to expand...
Click to collapse
Any one??
chetbiz said:
Any one??
Click to expand...
Click to collapse
Change the cable
Sent from my SM-F916B using Tapatalk
---------- Post added at 08:49 PM ---------- Previous post was at 08:47 PM ----------
I had the same problem
I change the cable and working on
Sent from my SM-F916B using Tapatalk
adeltamimy6 said:
Change the cable
Sent from my SM-F916B using Tapatalk
---------- Post added at 08:49 PM ---------- Previous post was at 08:47 PM ----------
I had the same problem
I change the cable and working on
Click to expand...
Click to collapse
Thanks) I wish it was just a cable..)
Try to look in maybe s20 ultra or s20 forum, they was released earlier and perhaps someone has already had this problem and solved it.
chetbiz said:
Any one??
Click to expand...
Click to collapse
Why don't you just put your Samsung account and password in? Because that's what you need to do in order to turn off the frp.. If you're going to tell us you don't know the Samsung user account and password that's only going to make us think the phone is stolen because that's basically what frp is meant to do block people from using it or doing updates or factory resetting it to try to remove the frp.. All you need is your Samsung account and password..
MrMike2182 said:
Why don't you just put your Samsung account and password in? Because that's what you need to do in order to turn off the frp.. If you're going to tell us you don't know the Samsung user account and password that's only going to make us think the phone is stolen because that's basically what frp is meant to do block people from using it or doing updates or factory resetting it to try to remove the frp.. All you need is your Samsung account and password..
Click to expand...
Click to collapse
Man are you serious?! I told you the problem not that I cant put my google or samsung credentials.. THE PHONE doesn't boot to the system at all can you understand this?! You can find me in another tread where I tried for cople weeks with guys from this forum to make our phone to work with native call record and reflash it many times with difrent firmware( CHC, TGY) and only one time I forgot to delete my google and samsung account before reflashing. So please dont tell me what you think, if you cant contribute to resolving and helping dont comment like you know something about me.
chetbiz said:
Man are you serious?! I told you the problem not that I cant put my google or samsung credentials.. THE PHONE doesn't boot to the system at all can you understand this?! You can find me in another tread where I tried for cople weeks with guys from this forum to make our phone to work with native call record and reflash it many times with difrent firmware( CHC, TGY) and only one time I forgot to delete my google and samsung account before reflashing. So please dont tell me what you think, if you cant contribute to resolving and helping dont comment like you know something about me.
Click to expand...
Click to collapse
Can you do me a favor with a patched version of Odin or just try multiple different Odin versions and flash only the CSC, AP and BL. and yes this is going to factory reset it probably but at least you might have the phone back.. Is this an unlocked bootloader phone btw? Edit: Make sure you're flashing the correct BL AP and CSC that the phone originally came with. Edit: Can you tell me what the last firmware was that you had on it?
MrMike2182 said:
Can you do me a favor with a patched version of Odin or just try multiple different Odin versions and flash only the CSC, AP and BL. and yes this is going to factory reset it probably but at least you might have the phone back.. Is this an unlocked bootloader phone btw? Edit: Make sure you're flashing the correct BL AP and CSC that the phone originally came with. Edit: Can you tell me what the last firmware was that you had on it?
Click to expand...
Click to collapse
I will try it, the phone is unrooted and with locked bootloader like it came from factory with no knox tripped. The last firmware that I was is "SM-N9860_20201112_TGY_N9860ZSU1BTJ9-N9860OZS1BTJ9-N9860ZCU1BT"
but the modification that I made was with SamKEY changed the CSC to CHC and after that flashed CHC csc file with odin, so in settings I had region CHC,CHC/CHC,TGY
Thanks for help
chetbiz said:
I will try it, the phone is unrooted and with locked bootloader like it came from factory with no knox tripped. The last firmware that I was is "SM-N9860_20201112_TGY_N9860ZSU1BTJ9-N9860OZS1BTJ9-N9860ZCU1BT"
but the modification that I made was with SamKEY changed the CSC to CHC and after that flashed CHC csc file with odin, so in settings I had region CHC,CHC/CHC,TGY
Thanks for help
Click to expand...
Click to collapse
Flash just the CSC, AP and BL of the firmware version N9860ZSU1BTJ9 if that doesn't work then try flashing the CSC, AP and BL from the firmware version N9860ZSU1ATGM and see if that works..
chetbiz said:
I will try it, the phone is unrooted and with locked bootloader like it came from factory with no knox tripped. The last firmware that I was is "SM-N9860_20201112_TGY_N9860ZSU1BTJ9-N9860OZS1BTJ9-N9860ZCU1BT"
but the modification that I made was with SamKEY changed the CSC to CHC and after that flashed CHC csc file with odin, so in settings I had region CHC,CHC/CHC,TGY
Thanks for help
Click to expand...
Click to collapse
Hi Chetbiz,
On your original thread, I did mention a ”patched” version of ODIN, I thought you already tried it. I guess not...
So there is still chance [emoji848].
Sent from my SM-N9860 using Tapatalk
fjorger said:
Hi Chetbiz,
On your original thread, I did mention a ”patched” version of ODIN, I thought you already tried it. I guess not...
So there is still chance [emoji848].
Click to expand...
Click to collapse
Hi fjorger)
I tryed with patched odin yesterday, what I didn't try is to flash only 3 files, AP, BL, CSC.. so I'll try it tomorrow evening after I'll get my phone back from technician hopefully he we'll succeed but I'm doubt it...
Thanks)
Got my phone back from technician, they didn't success to reflash it, I tried to flash firmware with patched odin and only BL, AP, CSC same here, error cant download pit file because of frp lock...
chetbiz said:
Got my phone back from technician, they didn't success to reflash it, I tried to flash firmware with patched odin and only BL, AP, CSC same here, error cant download pit file because of frp lock...
Click to expand...
Click to collapse
From what I understand I need Binary 4 file to unlock frp lock, maybe some one knows something about this file and if we got one anywhere?
I have never heard about it before, sorry
You may have to bite the bullet and send back to Samsung and have them reset the phone to original factory condition. It may cost some money, but better that than not having a phone at all -- a lot less than buying a new note for sure.
If you can't get it to flash on your own, I think that is your only option.
One quick thought - have you tried to turn off the phone and then boot back into Download mode? if not, try holding power and volume down until screen turns off - and when it is still off -quickly plug the USB cord into your phone. This will (should) force download mode - if it works - click volume up and then use Odin to try to flash the last firmware file you have (try all four files)
I don't know if this will help or make a difference, but if you haven't already tried this - it may work for you.
Good luck....
Geekser said:
You may have to bite the bullet and send back to Samsung and have them reset the phone to original factory condition. It may cost some money, but better that than not having a phone at all -- a lot less than buying a new note for sure.
If you can't get it to flash on your own, I think that is your only option.
One quick thought - have you tried to turn off the phone and then boot back into Download mode? if not, try holding power and volume down until screen turns off - and when it is still off -quickly plug the USB cord into your phone. This will (should) force download mode - if it works - click volume up and then use Odin to try to flash the last firmware file you have (try all four files)
I don't know if this will help or make a difference, but if you haven't already tried this - it may work for you.
Good luck....
Click to expand...
Click to collapse
Yes I think too that sending back to seller is my only option, I'm trying to connect with him, I bought on ebay, the problem he's doesn't answering me.
About download mode of course I entered the download mode after he was turned off. Nothing works, the strange thing that its fails to flash the latest tgy firmware, there I dont have an error about pit file or frp lock but its still failes on AP file when trying to write super.img... So I don't know what the solution for that, maybe in next firmware version it
will succeed
chetbiz said:
Yes I think too that sending back to seller is my only option, I'm trying to connect with him, I bought on ebay, the problem he's doesn't answering me.
About download mode of course I entered the download mode after he was turned off. Nothing works, the strange thing that its fails to flash the latest tgy firmware, there I dont have an error about pit file or frp lock but its still failes on AP file when trying to write super.img... So I don't know what the solution for that, maybe in next firmware version it
will succeed
Click to expand...
Click to collapse
You probably already tried this - but just in case, go to this link and download the most recent PATCHED Odin -
Then get several different USB Cords - Samsung Original is usually the best - but get different cords just the same -
then try to flash all four files in that patched odin - if it fails, close odin - open it again and reload the files and try again using a different USB Cord.
I believe that if you keep trying, you will eventually get it to work...
By the way, If you can't get the Seller to do the right thing - contact SAMSUNG Support and arrange to send it back to them. They may charge you (Probably around $100 or so I think) but they can definately help you get it working again.
Hope that helps - Good Luck.
Tried to flash the latest firmware N9860ZSU1BTK3 but still stuck on writing super.img in odin
Don't know what to do
chetbiz said:
Tried to flash the latest firmware N9860ZSU1BTK3 but still stuck on writing super.img in odin
Don't know what to do
Click to expand...
Click to collapse
super.img is from AP. Try to flash the build that was working on your phone before the issue happened, but without the AP.