Related
hi 2 all
I want to brief how made brick my tab step by step
first of all i had an Acer_A500_4.010.43_COM_GEN1 3.1 stock rom on my tab that i upgrade it to 3.2 Acer_A500_7.006.01_COM_GEN1 by tablet then i decided to root my tablet for installation custom rom and i downgrade to 3.01 rom by this typic http://forum.xda-developers.com/showthread.php?t=1276227 method 1 i reverted successfully and after rooting i installed and tested this 3 roms (taboonay 2.2-thor 14.2&light speed 1.07) but each one had some problems like google map or gps or rotation screen so i installed a 3.1hc stock rom Acer_A500_4.010.41_COM_GEN1 and rooted that worked good but i had mistake and i forget erase update.zip file from my sd card
4days ago Mistakenly I turn on my tablet with recovery mode and iconia automattically gone to update mode (rom installation) i did nothing but this opration was stopped at 80% and my wrong was here i could not be patient and shut down my tab by power button and i bricked my tablet
after that i test all method for unbrick it like not stable rom , Chinese and whitout Chinese roms using of stock rom like Acer_A500_4.010.38_COM_GEN1
without any success only in not stable rom processes gone to 95 % and then stoped and nothing
after update to chinese rom it stopped at 30 % with yellow triangle sign
and then happend something bad and i loose my CWM
NOW if i want to go to recovery mode by pressing power+vol down keys Iconia show me a message
secure boot: image SOS checksum fail!
and in normal booting I have a locked black screen with nonworking touchables button and android word at left top of screen and clock & 15% battery sometimes it show a message for shutting down
i cant go to setting menu for active my usb debugging and my pc do not recognize my tablet
i cant hard reset my tab because it hanged in 2 message for 30 mins and i cant go to recovery mode and customer services says your device is out of warranty because rotting that
but Fortunately I have my UID
excuse me for long story
any body help me please
thank all of you
that is amazing over 150 visit of this help request without any answer please give me a Proposal
thanks
I have a501 .....
http://forum.xda-developers.com/showthread.php?t=1419164
the chinese rom and checksum error are supposed to happen.
the chines rom is an old unstable version but is provided so we can root it to install cwm and flash a working rom.
after the checksum error you needed to power off and then using the buttons enter recovery mode and go to 'Fix checksum error' in advanced menu - after that reboot.
you should do the following:
a)go back and read the entire post on what to do because you missed the last part
or
b)try the backdoor method
---------- Post added at 12:21 PM ---------- Previous post was at 11:49 AM ----------
just read your entire post again...there's alot going on there isnt there?
have you tried flashing the update.zip again with 3.0.1 on it...get back to the chinese rom, from there install iconia root and root it. Then install cwm and you should be all good - if that doesnt work then use timmyDeans backdoor method it does it for you, all you need to do is install acer recovery installer to install cwm, backup the original stock recovery when the app asks you, you will need it to OTA Update successfully...
Doesn't flashing stock rom remove cwm?
bendystrawboy said:
Doesn't flashing stock rom remove cwm?
Click to expand...
Click to collapse
yeh i just had trouble when i OTA'd last nite on the 2nd update, had to flash stock before it would install, but i may have restored the wrong one from acer recovery installer beforehand...a definite possibility!!!
by flashing from method 1 my racovery mode came back again and i can recover only from update.zip
but when i want to install Extract_unBrick_UPDATE it stop at 30% and my tab goes to turn off and when i press power button it turnnig on and turn off very soon and can not boot
I test non stable rom and flash with this rom proccess goes to 90% and stop
what can i do now? this is my tablet screen
http://s1.picofile.com/file/7237922040/Photo_0007.jpg
http://s2.picofile.com/file/7237923010/Photo_0008.jpg
http://s1.picofile.com/file/7237924301/Photo_0009.jpg
thank u
darvis said:
by flashing from method 1 my racovery mode came back again and i can recover only from update.zip
but when i want to install Extract_unBrick_UPDATE it stop at 30% and my tab goes to turn off and when i press power button it turnnig on and turn off very soon and can not boot
I test non stable rom and flash with this rom proccess goes to 90% and stop
what can i do now? this is my tablet screen
http://s1.picofile.com/file/7237922040/Photo_0007.jpg
http://s2.picofile.com/file/7237923010/Photo_0008.jpg
http://s1.picofile.com/file/7237924301/Photo_0009.jpg
thank u
Click to expand...
Click to collapse
Unbrick it using my tool listed here, guarantee you it will fix your problems.
Just download it and follow the instructions in the readme.pdf.
http://forum.xda-developers.com/showpost.php?p=20680452&postcount=137
timmyDean said:
Unbrick it using my tool listed here, guarantee you it will fix your problems.
Just download it and follow the instructions in the readme.pdf.
http://forum.xda-developers.com/showpost.php?p=20680452&postcount=137
Click to expand...
Click to collapse
hello master
i am so glad for your attention to my problem
i use from your rom before that pictures are shown above and my tablet show ((pass)) and pc show congratulation to me but u see nothing change but Hopefully that fix my cvm problem an now ican use from update.zip rom but my screen didn't any change and i cant do anything by tablet
I don't know anything about backdoor method is it useful for my problem ?
i have 2 problems
1-i cant wipe and erase my whole data even when i press vol+ and power keys and toggle lock screen button it shown two message for erasing cash but it do anything
2-my PC don't recognize my tablet i have to flash your rom with APX mode
i have a question do your rom need to CUPID file ? because there isn't any cupid file in your Rom
please help me sir because you are a greet master
thanks
darvis said:
hello master
i am so glad for your attention to my problem
i use from your rom before that pictures are shown above and my tablet show ((pass)) and pc show congratulation to me but u see nothing change but Hopefully that fix my cvm problem an now ican use from update.zip rom but my screen didn't any change and i cant do anything by tablet
I don't know anything about backdoor method is it useful for my problem ?
i have 2 problems
1-i cant wipe and erase my whole data even when i press vol+ and power keys and toggle lock screen button it shown two message for erasing cash but it do anything
2-my PC don't recognize my tablet i have to flash your rom with APX mode
i have a question do your rom need to CUPID file ? because there isn't any cupid file in your Rom
please help me sir because you are a greet master
thanks
Click to expand...
Click to collapse
V3 which I pointed you to is STOCK 3.2.1 with root. Once you get there you will be stable. If you want CWM then you will have to install it. It is NOT in the flash because the flash is stock ONLY with root. But since you have root, you can install CWM.
The serial number does NOT need to be saved in any file. Just follow the instructions.
timmyDean said:
V3 which I pointed you to is STOCK 3.2.1 with root. Once you get there you will be stable. If you want CWM then you will have to install it. It is NOT in the flash because the flash is stock ONLY with root. But since you have root, you can install CWM.
The serial number does NOT need to be saved in any file. Just follow the instructions.
Click to expand...
Click to collapse
sorry sir
I used your v3 rom and install it by apx mode it installed and I saw ((pass)) on my tablet after botting and after acer logo and android word i have same problem yet
http://s1.picofile.com/file/7238522040/Photo_0010.jpg
http://s2.picofile.com/file/7238522903/Photo_0011.jpg
http://s1.picofile.com/file/7238523331/Photo_0012.jpg
however thank you very much for your attention
sincerely yours
darvis said:
sorry sir
I used your v3 rom and install it by apx mode it installed and I saw ((pass)) on my tablet after botting and after acer logo and android word i have same problem yet
http://s1.picofile.com/file/7238522040/Photo_0010.jpg
http://s2.picofile.com/file/7238522903/Photo_0011.jpg
http://s1.picofile.com/file/7238523331/Photo_0012.jpg
however thank you very much for your attention
sincerely yours
Click to expand...
Click to collapse
Ok, now just download the stock image for your country and put it on your external sdcard. Use the power and volume + key which will launch stock recovery (which you now have flashed) and it will flash your tablet with the one located on your sdcard. This will have you back stock.
timmyDean said:
Ok, now just download the stock image for your country and put it on your external sdcard. Use the power and volume + key which will launch stock recovery (which you now have flashed) and it will flash your tablet with the one located on your sdcard. This will have you back stock.
Click to expand...
Click to collapse
sorry sir
what did you mean about power and volume + key?
do you mean power and vol down keys for recovery mode?
darvis said:
sorry sir
what did you mean about power and volume + key?
do you mean power and vol down keys for recovery mode?
Click to expand...
Click to collapse
You have a "volume" switch on top of your tab (long silver switch on left side)
You control volume from this. Vol+ make sound go up (the right side of it)
Press it on the left side, and volume goes quiet (vol-)
So, as he said, with the tablet OFF, hold the VOL+ side of the button, then select PWR (power)
You have 2 recovery modes.
1. CWM Recovery (vol- & Pwr) (after you have root and cwm installed)
2. Stock Acer recovery (vol+ & Pwr)
Step number 2 with the stock acer recovery, should install the stock rom you copied to your sd like TimmyDean said earlier.
Moscow Desire said:
You have a "volume" switch on top of your tab (long silver switch on left side)
You control volume from this. Vol+ make sound go up (the right side of it)
Press it on the left side, and volume goes quiet (vol-)
So, as he said, with the tablet OFF, hold the VOL+ side of the button, then select PWR (power)
You have 2 recovery modes.
1. CWM Recovery (vol- & Pwr) (after you have root and cwm installed)
2. Stock Acer recovery (vol+ & Pwr)
thanks a lot
Step number 2 with the stock acer recovery, should install the stock rom you copied to your sd like TimmyDean said earlier.
Click to expand...
Click to collapse
thank u sir
but there is a question
1-in CWM recovery we can use from Update.zip files
but in Stock Acer recovery (vol+&power ) which one of files must be copied at sd card ?
darvis said:
thank u sir
but there is a question
1-in CWM recovery we can use from Update.zip files
but in Stock Acer recovery (vol+&power ) which one of files must be copied at sd card ?
Click to expand...
Click to collapse
Answer me please
darvis said:
Answer me please
Click to expand...
Click to collapse
Please rewrite what you are trying to do. I have no idea what you are talking about?
Are you asking about stock recovery and flashing form a SD Card? If so, copy update.zip to your SD card and then run recovery. If you have CWM, then use it to select the update from the SD Card.
It's not clearly as to exactly what you have loaded and what you are trying to do?
LASTLY: You cannot take a backup from CWM and have the stock recovery install it. Stock recovery will only install update.zip which must be signed by ACER.
TD
timmyDean said:
Please rewrite what you are trying to do. I have no idea what you are talking about?
Are you asking about stock recovery and flashing form a SD Card? If so, copy update.zip to your SD card and then run recovery. If you have CWM, then use it to select the update from the SD Card.
It's not clearly as to exactly what you have loaded and what you are trying to do?
LASTLY: You cannot take a backup from CWM and have the stock recovery install it. Stock recovery will only install update.zip which must be signed by ACER.
TD
Click to expand...
Click to collapse
Hello sir
in upper post u tell me i must go to recover mode by pressing power & vol+
but only i can go to stock recovery with pressing power & vol-(not vol+)
is there any other method for going to recovery mode by (vol+) ?
because Mr Moscow Desire said in his upper post (post no 14 of this thread)
if yes how ?
if not ..... just thank u
there is only one recovery on your device..
you should slowly repost your exact trouble.. then do EXACTLY as someone tell you to fix it..
There is only one recovery on your device . If YOU FLASH CWM RECOVERY .. it overrides the acer recovery.
so if you dont have cwm revovery .
nevermind repost your system rom you are using .. rather or not you know what recovery you have .. Then someone can help you...
LOST BLONDE BABE I AM .. GIGGLES
gOOD LUCK..
Sorry you're having difficulty.
Please go here and download the is tool http://forum.xda-developers.com/showthread.php?t=1307539
Do EXACTLY what it says to do in the PDF
I once tried to use geno's partition resize, and after a reboot, it cannot boot into system anymore. Stuck at the huawei logo.
Since I'm quite familiar with linux, I tried this solution: http://forum.xda-developers.com/showthread.php?t=1971266
However, my linux installation didn't show any drives when it's in pink screen mode, so I'm pretty much stuck here.
In Windows 8 it did show two HUAWEI Technologies device (no drivers though) in pink screen mode.
I can't access recovery mode either, holding power + vol up only does normal boot for some strange reason. Anyone can help me out here?
ansarips said:
I once tried to use geno's partition resize, and after a reboot, it cannot boot into system anymore. Stuck at the huawei logo.
Since I'm quite familiar with linux, I tried this solution: http://forum.xda-developers.com/showthread.php?t=1971266
However, my linux installation didn't show any drives when it's in pink screen mode, so I'm pretty much stuck here.
In Windows 8 it did show two HUAWEI Technologies device (no drivers though) in pink screen mode.
I can't access recovery mode either, holding power + vol up only does normal boot for some strange reason. Anyone can help me out here?
Click to expand...
Click to collapse
try put official GB dload file on sd card, then put sd card in phone press power up+power down+power...
maybe it'll help you.
I tried that too, and it still bootloops. Not much luck.
Go to recovery and wipe everything. Then, reboot recovery, and then try partitioning again.
I can't get into recovery by pressing power + vol up. It just does normal boot (which bootloops).
If there would be any other way to get into recovery (such as via ADB or update.app) would be highly appreciated.
ansarips said:
I can't get into recovery by pressing power + vol up. It just does normal boot (which bootloops).
If there would be any other way to get into recovery (such as via ADB or update.app) would be highly appreciated.
Click to expand...
Click to collapse
Yes, you can boot into recovery via adb:
Code:
adb reboot recovery
But, you cannot use that until your phone is booted up.
If that doesn't work, you can follow these instructions to hard reset your phone:
http://www.hard-reset.com/huawei-u8800-ideos-x5-hard-reset.html
Good Luck.
I can't get it to do the hard reset either. It just boots normally, aside from the bootloop.
I believe I need to fix the partition first before I try to reinstall stock. I hear that stock doesn't work with custom partitions. Which is why I'd prefer to at least get some access to the device via USB in order to fix it.
Ah well. It's a failing device anyway. Even before the brick the camera doesn't work anymore, regardless of which ROM I choose. Maybe it's time to move on for me.
ansarips said:
I can't get it to do the hard reset either. It just boots normally, aside from the bootloop.
I believe I need to fix the partition first before I try to reinstall stock. I hear that stock doesn't work with custom partitions. Which is why I'd prefer to at least get some access to the device via USB in order to fix it.
Ah well. It's a failing device anyway. Even before the brick the camera doesn't work anymore, regardless of which ROM I choose. Maybe it's time to move on for me.
Click to expand...
Click to collapse
I have found someone who has solved this problem.
Go to this link. In the first post, the OP has shared the solution with us.
Try it, and Good Luck!
rqmok said:
I have found someone who has solved this problem.
Go to this link. In the first post, the OP has shared the solution with us.
Try it, and Good Luck!
Click to expand...
Click to collapse
Well, I tried this too (in fact I stated it in the first post) but pink screen mode isn't showing any device (I typed in "dmesg" in the Linux Terminal, none is found).
I appreciate your help, though. If I can solve the detection problem, I should be able to recover my phone using this method. I'd be happy to share some logs if it helps.
I got your back buddy
ansarips said:
Well, I tried this too (in fact I stated it in the first post) but pink screen mode isn't showing any device (I typed in "dmesg" in the Linux Terminal, none is found).
I appreciate your help, though. If I can solve the detection problem, I should be able to recover my phone using this method. I'd be happy to share some logs if it helps.
Click to expand...
Click to collapse
Hey, this is my first post well here it goes
Step 1 :- Format the sd card and put dload folder in it ( you'll get it from the official rom zip file)
Step 2 :- press and hold vol+ & vol- and then power button, it'll start upgrading
Step 3 :- now here is the tricky part!!! i was stuck here too and gone half mad well, let it reboot it will format cache etc and then bootloops, now turn off the device and then turn on pressing vol+ and power button, or u can try by pressing home, vol+ and power button, u'll b in recovery mode i.e in official rom builtin i guess.
Step 4 :- once in recovery, select reset factory default and clear partition cache, and then reboot!!!! Voila u will b able to finally boot successfully...
Now listen very carefully, u got only one chance here, cause if u reboot ur device again then bootloops will start again so in the first go, root the device by superoneclick and then install recovery i guess u knw all that and then u will be able to return to stock rom by flashing... once u've installed CWM then u r good to go bootloop wont effect ya SORRY FOR MY BAD ENGLISH THOUGH
How-to: root the HTC M9+ (tested on Chinese model)
This is a short step by step guide about rooting the device. So far tested on a chinese HTC M9+
A collection of stock partitionas, RUUs, and twrps: https://forum.xda-developers.com/on...uu-m9-hiauml-ruu-recovery-collection-t3690966
DISCLAIMER, WARNING: If you use this guide, all responsibility is yours. The author is not responsible in any way if something goes haywire or any damage happening to the device
This was tested on a Chinese M9+. Please if you try, report back how it goes. Also be aware that currently there are some regions with firmware where we miss the stock recovery image for the different stock ROMs the different M9+ models come with in different countries, and the process contains steps that overwrite Stock recovery, and as of now, I can't provide you with your stock recovery for all possible carriers only a selected few ones and there's no way I know of to save it. (The fastboot boot recovery.img didn't work for me, since the new Download mode didn't allow me to just boot the custom recovery without flashing it. If you know a new way how to do that (boot recovery without flashing it), you can save your own Stock recovery that way, then don't forget to let us know how that can be done!!!) Some region's stock recovery if you want to revert to them: link. Also as soon as you mount ReadWrite the system partition OTA flashing will stop working. You need to back up the system partition in Read-Only mode, available in TWRP 2.8.7.0., and restore that untouched system backup to make OTA work again along with the stock recovery.
Hit the Thanks button if you like the work being done.
You will need
- for Windows:
-- HTC Sync installed (and fastboot.exe inside it's installation, look the fastboot.exe up there)
(-- Optional: Oracle Java JDK 7 + Android SDK platform tools installed (for fastboot.exe, HTC Sync contains fastboot.exe too))
- for Linux:
-- fastboot and working adb connection
- in general:
-- A third party (custom) recovery downloaded, like TWRP (you can get one here: http://forum.xda-developers.com/one-m9/one-m9-general/recovery-twrp-2-8-6-0-english-m9pw-t3116099 ), to flash the SuperSU installer
-- SuperSU installer downloaded (e.g. https://download.chainfire.eu/1001/SuperSU/UPDATE-SuperSU-v2.78-20160905010000.zip )
-- Phone and USB cable
Steps to root the device (starting with a locked device):
1. Unlock the Bootloader. You can do it online here: http://www.htcdev.com/bootloader Select the 'All Other Supported Models'. Proceed as the HTC site directs you. Read everything carefully.
2. Go into Download mode (with an unlocked bootloader): with a device fully booted you can do so with Power off the phone and then long Power + Vol Down
3. Connect phone to PC with USB cable
4. Flash custom recovery with fastboot in command line:
Code:
fastboot flash recovery recovery_xy.img
output for a successful recovery flashing:
Code:
target reported max download size of 800000000 bytes
sending 'recovery' (13996 KB)...
OKAY [ 1.454s]
writing 'recovery'...
(bootloader) HOSD CL#534001
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) Update partition OK
(bootloader) [email protected]
OKAY [ 1.272s]
finished. total time: 2.728s
4.1 After a successful flashing of recovery, you can create a full backup with the installed recovery if you wish, before rooting the device, check point 6th. how to go into recovery mode. There select Backup and do it. Then Reboot to normal mode and continue:
5. Boot the phone to normal mode, copy the SuperSU update flashable installer zip to device from your PC From fastboot Download mode to boot to normal mode: just navigate with volume buttons and select Reboot with pressing the Power button.
6. Go into recovery mode: Power off. Long press Power + Vol Down. In Download mode with volume buttons navigate to reboot to bootloader, press power. In bootloader navigate with volume buttons to BOOT TO RECOVERY MODE, press Power.
7. In booted Recovery, install SuperSU flashable zip with Install button: Select Install in the recovery, browse the SuperSU zip and flash it
Then reboot. The SuperSU app should be there amongst the accessible apps, and also now you can go super user in an adb shell (you'll need to enable USB Debugging in Developer options by going into Settings/About/Software information/More and pressing Build number 6+ times to get Developer Options, and then go into Developer options and enable USB Debugging):
Code:
c:\Program Files (x86)\Android\android-sdk\platform-tools>adb shell
[email protected]_hiau_ml_tuhl:/ $ su
su
[email protected]_hiau_ml_tuhl:/ #
In general in Download mode and Bootloader mode, you can navigate with Volume Up/Down buttons and select an option with pressing the Power button.
Have a successful flashing, and be careful! And don't forget: We only have a selected few region's stock firmware's stock recovery images to replace the custom ones here on this forum, so only do this if you are okay with custom ROM development (that can be flashed from TWRP/custom recovery) or you can get your hands on a stock recovery for your model's appropriate official stock rom version otherwise official OTA updates might not work with TWRP.
Also as soon as you mount ReadWrite the system partition OTA flashing will stop working. You need to back up the system partition in Read-Only mode, available in TWRP 2.8.7.0., and restore that untouched system backup to make OTA work again along with the stock recovery.
You'll find a bunch of stock recoveries here: http://forum.xda-developers.com/one-m9/one-m9-general/firmware-stock-recoveries-regions-t3120826
Thanks! this did work for me! :good::good:
thanks for this guide! (-:
It worked for me too!
Great
Thanks
Sent from my HTC M9pw using XDA Free mobile app
C_Kings87 said:
Thanks! this did work for me! :good::good:
Click to expand...
Click to collapse
maramau said:
It worked for me too!
Great
Thanks
Sent from my HTC M9pw using XDA Free mobile app
Click to expand...
Click to collapse
Which version are you on? I purchased M9+ today in India and I am currently on 1.08.707.4 with HTC sense 7.0.
I am asking this because I just received a notification for System Update 1.61.707.4 (382.5 MB) and was wondering if this method would still work if I take this update..
IndianHacker said:
Which version are you on? I purchased M9+ today in India and I am currently on 1.08.707.4 with HTC sense 7.0.
I am asking this because I just received a notification for System Update 1.61.707.4 (382.5 MB) and was wondering if this method would still work if I take this update..
Click to expand...
Click to collapse
It should work. Nothing is depending on the version of firmware you've got with the update (as this isn't a method to s-off which generally depends on firmware and kernel version because of the exploit it may use.)
I'm confident that you will be able to do the official HTC unlock and then flash recovery and root zip to your phone after the update, that's how it usually is.
HTC one M9 Problem on restarting up
Dear friends and developer,
I had unlocked my htc m9 and I try to install the TWRP 2.7.0.2 but it keep gives me an error after that I press LK DDR TEST AND after that it's stuck on this AND just keep restarting on the same screen and I can't go back to the boot-loader.
any help plz ?
Thanks a lot
Please write me back to send you the images
This is when it restart
postimg.org/image/4nr273a8r
This is when it get stuck
postimg.org/image/86323hb4r
This is m9 plus forum, not m9. Do you have the plus? There's only 2.8.7.0 and 2.8.6.0 recovery for it, no 2.7.0.2
Yes,he has m9 plus "HTC_HIAU_ML".
First, maybe he flash the wrong custom recovery.
Second, he should't run "DDR TEST" mode. It will result in boot loop.
Try to press all 3 botton (volume up + down + power) for a period of time.
Maybe it will power down the device. Give it a go.
Yes I have HTC M9+
yvtc75 said:
Yes,he has m9 plus "HTC_HIAU_ML".
First, maybe he flash the wrong custom recovery.
Second, he should't run "DDR TEST" mode. It will result in boot loop.
Try to press all 3 botton (volume up + down + power) for a period of time.
Maybe it will power down the device. Give it a go.
Click to expand...
Click to collapse
Thanks a lot for your advice , I try it many time but it's not working at all, it just keep restarting and IF I just wait it show me this screen http://postimg.org/image/4nr273a8r
please help me.
khaled03 said:
Thanks a lot for your advice , I try it many time but it's not working at all, it just keep restarting and IF I just wait it show me this screen http://postimg.org/image/4nr273a8r
please help me.
Click to expand...
Click to collapse
This I've not seen yet. Seems like boot to download and recovery mode is not in this menu, which is a serious issue, but very strange as you're s-on. What exactly you flashed as recovery 2.7.0.2 and how?
Reading that the normal ways don't work to get to download mode and it's also missing in bootloader mode too, I've no idea how you can then get to download mode, that way I don't know how you can flash back to ruu. If the download mode cannot load then it's near to brick, as far as my knowledge goes. Maybe someone with more knowledge about a-boot could help, or someone with special equipment to fix the phone. Sorry
Okay
tbalden said:
This I've not seen yet. Seems like boot to download and recovery mode is not in this menu, which is a serious issue, but very strange as you're s-on. What exactly you flashed as recovery 2.7.0.2 and how?
Reading that the normal ways don't work to get to download mode and it's also missing in bootloader mode too, I've no idea how you can then get to download mode, that way I don't know how you can flash back to ruu. If the download mode cannot load then it's near to brick, as far as my knowledge goes. Maybe someone with more knowledge about a-boot could help, or someone with special equipment to fix the phone. Sorry
Click to expand...
Click to collapse
Thanks a lot my friend .
I will wait maybe another one have this problem let's see
Does the fingerprint scanner still work after rooting?
yes it does there is also a mod for it====== http://forum.xda-developers.com/one-m9/one-m9-general/kernel-cleanslate-1-0-0-base1-61-81-t3147180
yankies2 said:
yes it does there is also a mod for it====== http://forum.xda-developers.com/one-m9/one-m9-general/kernel-cleanslate-1-0-0-base1-61-81-t3147180
Click to expand...
Click to collapse
Fingerprint doesnt work, it wakes and puts to sleep.
tbalden said:
This I've not seen yet. Seems like boot to download and recovery mode is not in this menu, which is a serious issue, but very strange as you're s-on. What exactly you flashed as recovery 2.7.0.2 and how?
Reading that the normal ways don't work to get to download mode and it's also missing in bootloader mode too, I've no idea how you can then get to download mode, that way I don't know how you can flash back to ruu. If the download mode cannot load then it's near to brick, as far as my knowledge goes. Maybe someone with more knowledge about a-boot could help, or someone with special equipment to fix the phone. Sorry
Click to expand...
Click to collapse
In earlier time,there were one option "DDR TEST" on the bootloader menu, I ever saw this.
Someone in Taiwan tried to press this option and result in boot loop.
He must return the device to customer service/repair department finally to resume it.
Here is another case on China.
http://tieba.baidu.com/p/3801472336
riz157 said:
Fingerprint doesnt work, it wakes and puts to sleep.
Click to expand...
Click to collapse
What are you exactly trying? It works after rooting for most users, and also with the kernel mod. This is the first time someone tells it doesn't
yvtc75 said:
In earlier time,there were one option "DDR TEST" on the bootloader menu, I ever saw this.
Someone in Taiwan tried to press this option and result in boot loop.
He must return the device to customer service/repair department finally to resume it.
Here is another case on China.
http://tieba.baidu.com/p/3801472336
Click to expand...
Click to collapse
wow,that sounds very bad luck, and poor work by HTC :s
I have just go out from this screen,
Hello friends,
I have just go out from this screen,
the solution is connect the phone to the PC then press and hold the volume down & up together and then press and hold the power for 2 minutes it starts to flash you have to wait until you hear the sound of the first connect then you have to release the power but you have to continue pressing the volume down & up and wait for 20 seconds then press the power again and wait to hear the sound again.
after doing this 2 times then release all of your fingers. .... and wait to see the normal reboot to the HTC screen and it works again.
Thanks a lot GOD
khaled03 said:
Hello friends,
I have just go out from this screen,
the solution is connect the phone to the PC then press and hold the volume down & up together and then press and hold the power for 2 minutes it starts to flash you have to wait until you hear the sound of the first connect then you have to release the power but you have to continue pressing the volume down & up and wait for 20 seconds then press the power again and wait to hear the sound again.
after doing this 2 times then release all of your fingers. .... and wait to see the normal reboot to the HTC screen and it works again.
Thanks a lot GOD
Click to expand...
Click to collapse
Wow, and who could tell you this piece of information? Sounds like there's more hidden stuff in these phones than one would think of.
Thanks for sharing
Last week, my yotaphone 2 informed that there is a system update from yotaphone. I downloaded and updated but then my phone cannot work. It show only black start screen with word "Android" until battery empty.
I tried to android recovery mode (hold power and volume up),
it show that the error is "e:cannot load volume /misc!".
And I do not know how to solve that problem.
Please help me!
leviet4 said:
Last week, my yotaphone 2 informed that there is a system update from yotaphone. I downloaded and updated but then my phone cannot work. It show only black start screen with word "Android" until battery empty.
I tried to android recovery mode (hold power and volume up),
it show that the error is "e:cannot load volume /misc!".
And I do not know how to solve that problem.
Please help me!
Click to expand...
Click to collapse
You can probably recover.
To reflash a full firmware image you could try the relatively user-friendly yotaflasher application and ROM images from here. I haven't used this myself, but it's software by Yota, so should be safe. You can ask it not to touch /data, to preserve apps, settings etc.
A less user friendly way to reflash a full firmware image:
- Download a full firmware image (EU 1.60 flashable version here, let me know if you require a different one)
- With the phone off, press vol down + power until you see "Downloading ...."
- If you can't turn the phone off normally, keep vol down + power for at least 15 seconds till phone reboots, keep holding till you end up with "Downloading ...."
- connect to a PC with adb+fastboot with a USB cable
- You can now boot TWRP image (fastboot boot recovery_twrp_yd201_alpha2.img , see here.
- if you have important files on your phone, you can back them up now by using adb shell/adb pull (e.g. adb pull /sdcard/Pictures/yeti_sighting.jpg)
- In TWRP go to advanced -> sideload and confirm
- now you can sideload a ROM image from the PC with adb sideload <image>.zip, it should show progress while it's uploading the firmware. If it errors, you probably haven't confirmed initiating sideload in previous step.
- wipe cache&dalvik and reboot
thank you, the first way worked and my phone runs normally now.
thank you
Help please
SteadyQuad said:
You can probably recover.
To reflash a full firmware image you could try the relatively user-friendly yotaflasher application and ROM images from here. I haven't used this myself, but it's software by Yota, so should be safe. You can ask it not to touch /data, to preserve apps, settings etc.
A less user friendly way to reflash a full firmware image:
- Download a full firmware image (EU 1.60 flashable version here, let me know if you require a different one)
- With the phone off, press vol down + power until you see "Downloading ...."
- If you can't turn the phone off normally, keep vol down + power for at least 15 seconds till phone reboots, keep holding till you end up with "Downloading ...."
- connect to a PC with adb+fastboot with a USB cable
- You can now boot TWRP image (fastboot boot recovery_twrp_yd201_alpha2.img , see here.
- if you have important files on your phone, you can back them up now by using adb shell/adb pull (e.g. adb pull /sdcard/Pictures/yeti_sighting.jpg)
- In TWRP go to advanced -> sideload and confirm
- now you can sideload a ROM image from the PC with adb sideload <image>.zip, it should show progress while it's uploading the firmware. If it errors, you probably haven't confirmed initiating sideload in previous step.
- wipe cache&dalvik and reboot
Click to expand...
Click to collapse
I have yotaphone model YD206, but I am in the USA and would like to root and load the best rom I can for my device, it doesn't even have google apps on it. Thanks for any and all help
Kevinreid1 said:
I have yotaphone model YD206, but I am in the USA and would like to root and load the best rom I can for my device, it doesn't even have google apps on it. Thanks for any and all help
Click to expand...
Click to collapse
Root the phone using methods written on this forum > download build 1.60 flammable zip > flash that.
If all you want is Google apps then root the phone then download and flash a gapps package. The full Yota build zip is recommended though.
Can't download yotaflasher application from the link... does anybody have the exe file?
SteadyQuad said:
You can probably recover.
To reflash a full firmware image you could try the relatively user-friendly yotaflasher application and ROM images from here. I haven't used this myself, but it's software by Yota, so should be safe. You can ask it not to touch /data, to preserve apps, settings etc.
A less user friendly way to reflash a full firmware image:
- Download a full firmware image (EU 1.60 flashable version here, let me know if you require a different one)
- With the phone off, press vol down + power until you see "Downloading ...."
- If you can't turn the phone off normally, keep vol down + power for at least 15 seconds till phone reboots, keep holding till you end up with "Downloading ...."
- connect to a PC with adb+fastboot with a USB cable
- You can now boot TWRP image (fastboot boot recovery_twrp_yd201_alpha2.img , see here.
- if you have important files on your phone, you can back them up now by using adb shell/adb pull (e.g. adb pull /sdcard/Pictures/yeti_sighting.jpg)
- In TWRP go to advanced -> sideload and confirm
- now you can sideload a ROM image from the PC with adb sideload <image>.zip, it should show progress while it's uploading the firmware. If it errors, you probably haven't confirmed initiating sideload in previous step.
- wipe cache&dalvik and reboot
Click to expand...
Click to collapse
glax87 said:
Can't download yotaflasher application from the link... does anybody have the exe file?
Click to expand...
Click to collapse
Just click on the YotaPhoneFlasher folder then click the file (yotaphone2_flasher.exe), and save to your harddisk.
Or you can try this link straight to the yotaphone2_flasher.exe file.
https://drive.google.com/file/d/0B0KC5E0zkBYmcHAzMEFKaHRvZ3M/view?usp=sharing
HOW
leviet4 said:
thank you, the first way worked and my phone runs normally now.
thank you
Click to expand...
Click to collapse
Dude I've just bought my phone, and it has the same problem. But I'm a complete noob, how did you fix it? Please, i've just bought it.
On RU build 134 when I tried to swap users my user with Defaut user, the phone blocked, the display is on (time is the same when first happend - just a freeze image) but I can't do nothing on phone. Is a way to reset? because on a normal way I would remove battery but yota dont have this option.
queser.info said:
On RU build 134 when I tried to swap users my user with Defaut user, the phone blocked, the display is on (time is the same when first happend - just a freeze image) but I can't do nothing on phone. Is a way to reset? because on a normal way I would remove battery but yota dont have this option.
Click to expand...
Click to collapse
The analogue method of pulling out the battery is pressing the POWER button for at least 10 seconds. The phone will reboot.
Thanks, I pushed vol down + Power and the phone restarted normaly.
PS: If you know where to get a book from Алекса́ндр Солжени́цын - Aleksandr Solzhenitsyn to read on yota display, send me.
SteadyQuad said:
You can probably recover.
To reflash a full firmware image you could try the relatively user-friendly yotaflasher application and ROM images from here. I haven't used this myself, but it's software by Yota, so should be safe. You can ask it not to touch /data, to preserve apps, settings etc.
A less user friendly way to reflash a full firmware image:
- Download a full firmware image (EU 1.60 flashable version here, let me know if you require a different one)
- With the phone off, press vol down + power until you see "Downloading ...."
- If you can't turn the phone off normally, keep vol down + power for at least 15 seconds till phone reboots, keep holding till you end up with "Downloading ...."
- connect to a PC with adb+fastboot with a USB cable
- You can now boot TWRP image (fastboot boot recovery_twrp_yd201_alpha2.img , see here.
- if you have important files on your phone, you can back them up now by using adb shell/adb pull (e.g. adb pull /sdcard/Pictures/yeti_sighting.jpg)
- In TWRP go to advanced -> sideload and confirm
- now you can sideload a ROM image from the PC with adb sideload <image>.zip, it should show progress while it's uploading the firmware. If it errors, you probably haven't confirmed initiating sideload in previous step.
- wipe cache&dalvik and reboot
Click to expand...
Click to collapse
Sir, i can't even get into recovery mode, i get this problem like it suddenly happen and my battery was 38%.. i was on facebook and it hang and then reboot and then stuck at "POWERED BY ANDROID".
I try to get into recovery mode by pressing volume up + power button, it restart again to "POWERED BY ANDROID"
When i pressing volume down + power button, it show downloding... , and i try to flash it using yotaflasher with HK Firmware 5.0.
When it is done, the phone reboot.
And it still stuck at "POWERED BY ANDROID"
What is the real problem ?
Please help!!!
While trying to solve the network issue on my Yotaphone 2 I managed to brick my phone. He is dead! But since it is a Snapdragon inside it can be fixed.
I need a help from someone who has rooted his Yotaphone2!
I need files from Yotaphone2 software: rawprogram0.xml and patch0.xml
Please!!!
hlmboy said:
Sir, i can't even get into recovery mode, i get this problem like it suddenly happen and my battery was 38%.. i was on facebook and it hang and then reboot and then stuck at "POWERED BY ANDROID".
I try to get into recovery mode by pressing volume up + power button, it restart again to "POWERED BY ANDROID"
When i pressing volume down + power button, it show downloading... , and i try to flash it using yotaflasher with HK Firmware 5.0.
When it is done, the phone reboot.
And it still stuck at "POWERED BY ANDROID"
What is the real problem ?
Click to expand...
Click to collapse
You need to keep pressing the power up button after the showing of "POWERED BY ANDROID", the power does not need to be pressed after then.
If you can still not reach recovery, you probably have a broken recovery (maybe wrong version) and something else is messed up.
When you flash recovery, you need to instantly go into recovery mode by pressing +/up on calling the according command
(fastboot reboot).
It does not look like you changed file system related things, did you change anything on your system/with root permissions?
Are you sure the installation process went without failure etc?
Getting out the cause (kernel logs etc) would be a bit hard without getting into recovery mode[and maybe also nonworking kernel], like stated out here
https://android.stackexchange.com/q...n-i-recover-files-from-a-phone-that-wont-boot
Hello everyone, from the title you've probably figured that I might be a noob and you'd be correct.
I have absolutely no idea what I'm doing. I'm trying to root and add TWRP to my phone, I've searched for a user friendly guide and this: "https://rootthedroid.com/root-leeco-le-max-2-install-twrp-recovery/" is the most user friendly guide I can find.
Something is not installing correctly and I think there are gaps in this guide, I'm pretty good at reading and following directions. I'm able to get into bootloader and Once I think I've installed TWRP the power button + volume down button does nothing when the phone is on except for take a screen shot and eventually shut down. However, when the phone is powered down, I'm able to hold the volume down + power buttons and it will eventually take me back to the bootloader screen but not to TWRP as the guide states it should.
So after this I thought I did something wrong and went to factory reset the phone.... When I initiated factory reset, that brought up the TWRP menu, so it was in fact installed onto the phone. I then continue the instructions in the guide. At the end, the power down + power button function does not work except for powering down the phone and bringing me back to the bootloader screen. I then installed the TWRP app and it still says that the device is not rooted.
I'm hoping someone can point me in the direction of a good thorough guide or please explain to me step by step how to get this thing rooted. I have x829 version and will be using primarily in Ohio if that matters. I'd also like some guidance on what ROM to choose.
Thank you for your time!!!!
boboyt said:
Hello everyone, from the title you've probably figured that I might be a noob and you'd be correct.
I have absolutely no idea what I'm doing. I'm trying to root and add TWRP to my phone, I've searched for a user friendly guide and this: "https://rootthedroid.com/root-leeco-le-max-2-install-twrp-recovery/" is the most user friendly guide I can find.
Something is not installing correctly and I think there are gaps in this guide, I'm pretty good at reading and following directions. I'm able to get into bootloader and Once I think I've installed TWRP the power button + volume down button does nothing when the phone is on except for take a screen shot and eventually shut down. However, when the phone is powered down, I'm able to hold the volume down + power buttons and it will eventually take me back to the bootloader screen but not to TWRP as the guide states it should.
So after this I thought I did something wrong and went to factory reset the phone.... When I initiated factory reset, that brought up the TWRP menu, so it was in fact installed onto the phone. I then continue the instructions in the guide. At the end, the power down + power button function does not work except for powering down the phone and bringing me back to the bootloader screen. I then installed the TWRP app and it still says that the device is not rooted.
I'm hoping someone can point me in the direction of a good thorough guide or please explain to me step by step how to get this thing rooted. I have x829 version and will be using primarily in Ohio if that matters. I'd also like some guidance on what ROM to choose.
Thank you for your time!!!!
Click to expand...
Click to collapse
You need to go for the right combination brother.....
Volume down with power button will take you to bootloader.....
For TWRP, press Volume up and power button simultaneously......
And for rooting flash magisk and you're good to go.....
Ahmad04 said:
You need to go for the right combination brother.....
Volume down with power button will take you to bootloader.....
For TWRP, press Volume up and power button simultaneously......
And for rooting flash magisk and you're good to go.....
Click to expand...
Click to collapse
This guy's got the right answer.
Please be sure to continue holding power and volume up until the words "recovery" come up on the screen otherwise it will just do a normal boot to Android.
Another method is to enable developer options (about phone and tap build 7 times), then to enable ADB, then use a PC and usb to the phone and use adb reboot recovery.
Also, if it boots to EUI ROM recovery instead of TWRP? It could be EUI ROM overwriting TWRP after flashing via fastboot.
The solution to that issue is to reboot into bootloader, flash recovery TWRP and then to either hold power and volume up to reboot into recovery or to use "fastboot boot TWRP.img" and then do reboot into recovery from there.
Why do we need to flash magisk?
kkcheong said:
Why do we need to flash magisk?
Click to expand...
Click to collapse
If you need root access.....
Ahmad04 said:
If you need root access.....
Click to expand...
Click to collapse
I root without magisk.